ETSI TS 134 122 V11.13.0 (2016-12)

Universal Mobile Telecommunications System (UMTS); Terminal conformance specification; Radio transmission and reception (TDD) (3GPP TS 34.122 version 11.13.0 Release 11)

RTS/TSGR-0534122vbd0

General Information

• Status: Published
• Publication Date: 30-Nov-2016
• Technical Committee: 3GPP RAN 5 - Mobile Terminal Conformance Testing (formely T1)
• Current Stage: 12 - Completion
• Completion Date: 01-Dec-2016

Standards Content (Sample)

ETSI TS 134 122 V11.13.0 (2016-12)






TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
Terminal conformance specification;
Radio transmission and reception (TDD)
(3GPP TS 34.122 version 11.13.0 Release 11)

---------------------- Page: 1 ----------------------
3GPP TS 34.122 version 11.13.0 Release 11 1 ETSI TS 134 122 V11.13.0 (2016-12)



Reference
RTS/TSGR-0534122vbd0
Keywords
UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 34.122 version 11.13.0 Release 11 2 ETSI TS 134 122 V11.13.0 (2016-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
rd
This Technical Specification (TS) has been produced by the ETSI 3 Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 34.122 version 11.13.0 Release 11 3 ETSI TS 134 122 V11.13.0 (2016-12)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 44
1 Scope . 45
2 References . 45
3 Definitions, abbreviations and equations . 46
3.1 Definitions . 46
3.2 Abbreviations . 47
3.3 Equations . 48
4 Frequency bands and channel arrangement . 48
4.1 General . 48
4.2 Frequency bands . 48
4.3 TX–RX frequency separation . 49
4.3.1 3,84 Mcps TDD Option . 49
4.3.2 1,28 Mcps TDD Option . 49
4.3.3 7,68 Mcps TDD Option . 49
4.4 Channel arrangement . 49
4.4.1 Channel spacing . 49
4.4.1.1 3,84 Mcps TDD Option . 49
4.4.1.2 1,28 Mcps TDD Option . 49
4.4.1.3 7,68 Mcps TDD Option . 49
4.4.2 Channel raster . 49
4.4.3 Channel number . 49
4.4.4 UARFCN (3,84 Mcps TDD Option) . 49
4.4.4A UARFCN (1.28 Mcps TDD Option) . 50
4.4.5 UARFCN (7,68 Mcps TDD Option) . 50
5 Transmitter Characteristics . 51
5.1 General . 51
5.2 User Equipment maximum output power . 51
5.2.1 Definition and applicability . 51
5.2.2 Minimum Requirements . 51
5.2.2.1 3.84 Mcps TDD option . 51
5.2.2.2 1.28 Mcps TDD option . 52
5.2.2.3 7.68 Mcps TDD option . 52
5.2.3 Test purpose . 53
5.2.4 Method of test . 53
5.2.4.1 Initial conditions . 53
5.2.4.1.1 3,84 Mcps TDD Option . 53
5.2.4.1.2 1,28 Mcps TDD Option . 54
5.2.4.1.3 7,68 Mcps TDD Option . 54
5.2.4.2 Procedure . 55
5.2.5 Test Requirements . 55
5.2.5.1 3,84 Mcps TDD Option . 55
5.2.5.2 1.28 Mcps TDD Option . 55
5.2.5.3 7.68 Mcps TDD Option . 56
5.2A User Equipment maximum output power with E-DCH. 56
5.2A.1 Definition and applicability . 56
5.2A.2 Minimum Requirements . 56
5.2A.2.1 3.84 Mcps TDD option . 56
5.2A.2.2 1.28 Mcps TDD option . 56
5.2A.2.3 7.68 Mcps TDD option . 57
5.2A.3 Test purpose . 57
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 34.122 version 11.13.0 Release 11 4 ETSI TS 134 122 V11.13.0 (2016-12)
5.2A.4 Method of test . 57
5.2A.4.1 Initial conditions . 57
5.2A.4.1.1 3,84 Mcps TDD Option . 57
5.2A.4.1.2 1,28 Mcps TDD Option . 58
5.2 A.4.1.3 7,68 Mcps TDD Option . 58
5.2A.4.2 Procedure . 58
5.2A.5 Test requirements . 58
5.2A.5.1 3.84 Mcps TDD Option . 58
5.2A.5.2 1.28 Mcps TDD Option . 58
5.2A.5.3 7.68 Mcps TDD Option . 59
5.2B User Equipment maximum output power with HS-SICH and DPCH . 59
5.2B.1 Definition and applicability . 59
5.2B.2 Minimum Requirements . 59
5.2B.2.1 3.84 Mcps TDD option . 59
5.2B2.2 1.28 Mcps TDD option . 59
5.2B.2.3 7.68 Mcps TDD option . 60
5.2B.3 Test purpose . 60
5.2B.4 Method of test . 60
5.2B.4.1 Initial conditions . 60
5.2B.4.2 Procedure . 60
5.2B.5 Test requirements . 61
5.2B.5.1 3.84 Mcps TDD Option . 61
5.2B.5.2 1.28 Mcps TDD Option . 61
5.2B.5.3 7.68 Mcps TDD Option . 61
5.3 UE frequency stability . 61
5.3.1 Definition and applicability . 61
5.3.2 Minimum Requirements . 61
5.3.3 Test purpose . 62
5.3.4 Method of test . 62
5.3.4.1 Initial conditions . 62
5.3.4.1.1 3,84 Mcps TDD Option . 62
5.3.4.1.2 1,28 Mcps TDD Option . 62
5.3.4.1.3 7,68 Mcps TDD Option . 62
5.3.4.2 Procedure . 63
5.3.5 Test Requirements . 63
5.4 Output Power Dynamics . 63
5.4.1 Uplink power control . 63
5.4.1.1 Initial accuracy (3,84 Mcps TDD Option) . 63
5.4.1.1.1 Definition and applicability . 63
5.4.1.1.2 Minimum requirements . 63
5.4.1.1.3 Test purpose . 63
5.4.1.1.4 Method of test . 64
5.4.1.1.5 Test requirements . 64
5.4.1.2 Differential accuracy, controlled input (3,84 Mcps TDD Option) . 65
5.4.1.2.1 Definition and applicability . 65
5.4.1.2.2 Minimum requirements . 65
5.4.1.2.3 Test purpose . 65
5.4.1.2.4 Method of test . 65
5.4.1.2.5 Test requirements . 66
5.4.1.2A Differential accuracy, controlled input . 67
5.4.1.3 Open loop power control (1,28 Mcps TDD Option) . 67
5.4.1.3.1 Definition and applicability . 67
5.4.1.3.2 Minimum requirements . 67
5.4.1.3.3 Test purpose . 67
5.4.1.3.4 Method of test . 67
5.4.1.3.5 Test requirements . 68
5.4.1.4 Closed loop power control (1,28 Mcps TDD Option) . 69
5.4.1.4.1 Definition and applicability . 69
5.4.1.4.2 Minimum requirements . 69
5.4.1.4.3 Test purpose . 69
5.4.1.4.4 Method of test . 69
5.4.1.4.5 Test requirements . 70
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 34.122 version 11.13.0 Release 11 5 ETSI TS 134 122 V11.13.0 (2016-12)
5.4.1.5 Initial accuracy (7,68 Mcps TDD Option) . 71
5.4.1.5.1 Definition and applicability . 71
5.4.1.5.2 Minimum requirements . 71
5.4.1.5.3 Test purpose . 71
5.4.1.5.4 Method of test . 71
5.4.1.5.4.1 Initial conditions . 71
5.4.1.5.4.2 Procedure . 72
5.4.1.5.5 Test requirements . 72
5.4.2 Minimum output power . 72
5.4.2.1 Definition and applicability . 72
5.4.2.2 Minimum Requirements . 72
5.4.2.2.1 3,84Mcps TDD Option . 72
5.4.2.2.2 1,28Mcps TDD Option . 72
5.4.2.2.3 7,68Mcps TDD Option . 73
5.4.2.3 Test purpose . 73
5.4.2.4 Method of test . 73
5.4.2.4.1 Initial conditions . 73
5.4.2.4.2 Procedure . 73
5.4.2.5 Test requirements . 73
5.4.2.5.1 3,84 Mcps TDD Option . 73
5.4.2.5.2 1,28 Mcps TDD Option . 73
5.4.2.5.3 7,68 Mcps TDD Option . 73
5.4.3 Transmit OFF power . 74
5.4.3.1 Definition and applicability . 74
5.4.3.2 Minimum Requirements . 74
5.4.3.3 Test purpose . 74
5.4.3.4 Method of test . 74
5.4.3.5 Test requirements . 74
5.4.4 Transmit ON/OFF Time mask . 74
5.4.4.1 Definition and applicability . 74
5.4.4.2 Minimum requirements . 74
5.4.4.2.1 3,84Mcps TDD Option . 74
5.4.4.2.2 1,28Mcps TDD Option . 75
5.4.4.2.3 7,68Mcps TDD Option . 75
5.4.4.3 Test Purpose . 76
5.4.4.4 Method of test . 76
5.4.4.4.1 Initial conditions . 76
5.4.4.4.2 Procedure . 76
5.4.4.5 Test requirements . 76
5.4.5 Out-of-synchronisation handling of output power for continuous transmission . 77
5.4.5.1 Definition and applicability . 77
5.4.5.2 Minimum Requirement . 77
5.4.5.2.1 3,84 Mcps TDD Option . 77
5.4.5.2.2 1,28 Mcps TDD Option . 78
5.4.5.2.3 7,68 Mcps TDD Option . 79
5.4.5.3 Test purpose .
...