ETSI TS 104 001 V2.1.1 (2016-12)

Open Smart Grid Protocol (OSGP); Smart Metering/Smart Grid Communication Protocol

RTS/PLT-0051

General Information

• Status: Published
• Publication Date: 21-Dec-2016
• Technical Committee: PLT - Powerline Telecommunications
• Current Stage: 12 - Completion
• Due Date: 20-Jan-2017
• Completion Date: 22-Dec-2016

Standards Content (Sample)

ETSI TS 104 001 V2.1.1 (2016-12)






TECHNICAL SPECIFICATION
Open Smart Grid Protocol (OSGP);
Smart Metering/Smart Grid Communication Protocol

---------------------- Page: 1 ----------------------
2 ETSI TS 104 001 V2.1.1 (2016-12)



Reference
RTS/PLT-0051
Keywords
smart grid, smart meter

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 104 001 V2.1.1 (2016-12)
Contents
Intellectual Property Rights . 11
Foreword . 11
Modal verbs terminology . 11
1 Scope . 12
2 References . 12
2.1 Normative references . 12
2.2 Informative references . 12
3 Definitions and abbreviations . 13
3.1 Definitions . 13
3.2 Abbreviations . 15
4 OSGP operation overview . 18
5 OSGP network formation and maintenance . 20
5.0 Foreword . 20
5.1 Discovery Protocol . 20
5.2 Discovery Domain . 20
5.3 ADD Proxy Message . 20
5.4 ATM Query ID . 21
5.5 ATM Respond to Query . 22
5.6 Signal Strength Values . 22
5.7 Examples . 23
5.8 Fast Commission Message (FCM) . 23
5.8.1 Overview . 23
5.8.2 FCM message and response description . 23
6 OSGP Device data representation . 25
6.1 General overview . 25
6.2 Data Types. 25
6.3 Pending tables . 27
6.4 Value Control Identifiers (VCI) . 28
6.5 Value . 28
6.6 Register Naming Convention . 28
6.7 Table and Procedure Naming Conventions . 28
6.8 Interface Change Alarm (ICA NAK) . 29
7 Security. 29
7.0 Foreword . 29
7.1 OMA Key (OMAK) . 29
7.2 OSGP-RC4-PSK Authentication . 30
7.3 OSGP-RC4-PSK Encryption . 31
7.4 OSGP-AES-128-PSK Security Suite . 31
7.5 Hardware Lock . 32
8 Device Functional Description for the case the OSGP device is an electric power metering device . 32
8.1 General . 32
8.2 Time-Of Use Calendar (Optional) . 32
8.2.0 Foreword . 32
8.2.1 Manual Override Options (optional) . 33
8.2.2 Over Power Threshold Tariff (optional) . 33
8.3 Clock Adjustment (mandatory) . 34
8.3.1 Absolute Time Synch. 34
8.3.2 Clock Adjustment by Delta . 34
8.4 Billing Functions . 34
8.4.1 Self-Reads (mandatory) . 34
8.4.2 Total Energy (optional) . 35
8.4.3 On-Demand Reads of Current Billing Register Values (mandatory) . 35
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 104 001 V2.1.1 (2016-12)
8.5 Load Profile (mandatory) . 35
8.5.0 Foreword . 35
8.5.1 Use case: Reading Load Profile Data . 36
8.5.2 Use case: Parsing M-Bus Load Profile Data . 36
8.5.2.0 Foreword . 36
8.5.2.1 M-Bus Data Types and ET57 . 36
8.5.2.2 Load Profile Poll Rate . 37
8.5.2.3 Time Stamping . 37
8.5.3 Load Profile Unread Entries Alarm . 38
8.6 Self-Test (Alarms, Error Codes) (optional) . 38
8.7 Pulse Inputs (optional) . 38
8.8 Power Quality (optional) . 38
8.8.1 Functional Description . 38
8.9 Display (optional) . 40
8.9.0 Foreword . 40
8.9.1 Display Sources List (optional) . 40
8.9.2 Display Configuration (optional) . 42
8.9.3 Error Codes Configuration (optional) . 42
8.9.4 Simulated Wheel Rotation Configuration (optional) . 42
8.9.5 Disconnect Configuration (optional] . 43
8.9.6 CT and VT Ratios (optional) . 43
8.9.7 Firmware Version on Power-Up (optional) . 43
8.9.8 PLC signal quality Icons (optional) . 43
8.9.9 Scheduled Display Messages (optional) . 43
8.10 Load Disconnect Contactor (optional) . 43
8.10.0 Foreword . 43
8.10.1 Maximum Power and Current Level Thresholds . 44
8.10.1.0 Foreword . 44
8.10.1.1 Changing the Device's Maximum Power Level Threshold . 44
8.10.1.2 Changing the Device's Maximum Current Level Threshold . 45
8.10.1.3 Choosing Power or Current (optional) . 45
8.10.2 Prepaid Metering (optional) . 45
8.10.3 Local Manual Control (optional) . 46
8.10.4 Load Contactor Remote Control (optional) . 46
8.11 Control Relay (optional) . 47
8.11.0 Foreword . 47
8.11.1 Control Relay Randomization. 47
8.11.2 Time-Based Control Relay Calendar . 47
8.11.3 Remote Control . 47
8.12 History Log (optional) . 48
8.12.0 Foreword . 48
8.12.1 Critical Events (optional) . 48
8.12.1.0 Foreword . 48
8.12.1.1 Critical Event Categories . 48
8.12.1.2 Critical Event Bitmasks . 49
8.12.1.2.0 Foreword . 49
8.12.1.2.1 Example Critical Event Bitmask . 49
8.13 One-Time Reads (optional) . 50
8.14 Group Broadcasts (optional). 50
8.15 Demand Metering (optional) . 51
8.15.0 Foreword . 51
8.15.1 Demand Values (optional) . 51
8.15.1.0 Foreword . 51
8.15.1.1 Present Demand . 52
8.15.1.2 Previous Demand . 52
8.15.1.3 Maximum (Peak) Demand . 52
8.15.1.4 Coincident Sources. 52
8.15.1.5 Cumulative Demand. 52
8.15.1.6 Continuous Cumulative Demand . 52
8.15.1.7 Demand Reset . 52
8.15.1.8 Historical Demand Reset Log . 53
8.15.1.9 Initializing Demand Metering . 53
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 104 001 V2.1.1 (2016-12)
8.15.1.10 Reconfiguration . 53
8.16 Test Mode . 53
8.17 MEP Device Overview . 54
8.17.0 Foreword . 54
8.17.1 Downlink Data Transfer . 54
8.17.1.0 Foreword . 54
8.17.1.1 Reading Non-Urgent Data . 54
8.17.1.2 Reading and Processing On-Demand Requests . 56
8.17.2 Uplink Data Transfer . 58
8.17.2.0 Foreword . 58
8.17.2.1 Responding to a Scheduled Read Request (With and Without Alarms) . 58
8.17.2.2 Responding to an On-Demand Read Request (With and Without Alarms) . 60
8.17.2.3 Posting Unsolicited Non-urgent Data (With and Without Alarms). 62
8.17.2.4 Posting Unsolicited Urgent Data . 63
8.17.2.5 Posting Alarms Only . 64
8.18 M-Bus Device support (optional) . 65
8.18.0 Foreword . 65
8.18.1 Billing Data Collection . 65
8.18.1.0 Foreword . 65
8.18.1.1 On-Demand Reads for M-Bus Devices . 65
8.18.1.2 Scheduled Reads for M-Bus Devices . 66
8.18.1.3 One-Time-Reads for M-Bus Devices . 67
8.18.1.4 Power Outage Data-Read Interruptions . 67
8.18.2 Auto-discovery . 68
8.18.3 Device Removal . 68
8.18.4 M-Bus Status and Alarms . 68
8.19 Compatibility Settings (mandatory) . 68
9 Basic OSGP services . 69
9.0 Foreword . 69
9.1 Matching of requests and responses . 69
9.2 Buffer sizing restrictions . 69
9.3 Full Table Read service . 69
9.3.1 Request . 69
9.3.2 Full Read Response . 70
9.4 Full Table write service . 70
9.4.1 Request . 70
9.4.2 Response . 71
9.5 Partial table read . 71
9.5.1 Request . 71
9.5.2 Response . 71
9.6 Partial table write. 71
9.6.1 Request . 71
9.6.2 Response . 72
9.7 Request/Response sequencing . 72
9.8 Request/Response OSGP APDU example . 72
9.9 Response error codes . 73
9.10 Transactions . 74
9.11 Secure Broadcasts. 75
9.12 Downloading . 75
9.13 Procedure invocation . 75
9.13.0 Foreword . 75
9.13.1 Procedure Timing . 77
9.13.2 Slow and Non-Responsive Procedures . 77
Annex A (normative): Basic Tables . 78
A.1 Basic Table 00 (BT00): General Configuration . 78
A.2 Basic Table 01 (BT01): General Manufacturer Identification . 85
A.3 Basic Table 02 (BT02): Device Nameplate. 86
A.4 Basic Table 03 (BT03): End Device Mode Status . 87
ETSI

---------------------- Page: 5
...