ETSI ETS 300 374-2 ed.1 (1996-02)

Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1); Core Intelligent Network Application Protocol (INAP); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification for Service Switching Function (SSF), Specialized Resource Function (SRF) and Service Control Function (SCF)

DE/SPS-03015-2

Inteligentno omrežje (IN) - Prvi nabor zmožnosti (CS1) inteligentnega omrežja - Jedrni uporabovni (aplikacijski) del inteligentnega omrežja (INAP) - 2. del: Proformna specifikacija izjave o skladnosti izvedbe protokola (PICS) za funkcijo komutacije storitev (SSF), funkcijo posebnih virov (SRF) in funkcijo krmiljenja storitev (SCF)

General Information

• Status: Published
• Publication Date: 07-Mar-1996
• Technical Committee: SPS 3 - IN protocols
• Current Stage: 12 - Completion
• Due Date: 22-Mar-1996
• Completion Date: 08-Mar-1996
• Ref Project: SIST ETS 300 374-2:1997 - Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1); Core Intelligent Network Application Protocol (INAP); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification for Service Switching Function (SSF), Specialized Resource Function (SRF) and Service Control Function (SCF)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 374-2:1997
01-november-1997
Inteligentno omrežje (IN) - Prvi nabor zmožnosti (CS1) inteligentnega omrežja -
Jedrni uporabovni (aplikacijski) del inteligentnega omrežja (INAP) - 2. del:
Proformna specifikacija izjave o skladnosti izvedbe protokola (PICS) za funkcijo
komutacije storitev (SSF), funkcijo posebnih virov (SRF) in funkcijo krmiljenja
storitev (SCF)
Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1); Core Intelligent
Network Application Protocol (INAP); Part 2: Protocol Implementation Conformance
Statement (PICS) proforma specification for Service Switching Function (SSF),
Specialized Resource Function (SRF) and Service Control Function (SCF)
Ta slovenski standard je istoveten z: ETS 300 374-2 Edition 1
ICS:
33.040.35 Telefonska omrežja Telephone networks
SIST ETS 300 374-2:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 374-2:1997

---------------------- Page: 2 ----------------------

SIST ETS 300 374-2:1997
EUROPEAN ETS 300 374-2
TELECOMMUNICATION February 1996
STANDARD
Source: ETSI TC-SPS Reference: DE/SPS-03015-2
ICS: 33.020, 33.080
IN, CS1, INAP, PICS
Key words:
Intelligent Network (IN);
Intelligent Network Capability Set 1 (CS1);
Core Intelligent Network Application Protocol (INAP);
Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification for Service Switching Function (SSF),
Specialized Resource Function (SRF) and
Service Control Function (SCF)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - [e-mail]
X.400: Internet:
Tel.: [phone] - Fax: [phone]
*
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 374-2:1997
Page 2
ETS 300 374-2: February 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 374-2:1997
Page 3
ETS 300 374-2: February 1996
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions and abbreviations .7
3.1 Definitions .7
3.2 Abbreviations .8
4 Conformance.8
Annex A (normative): PICS proforma for core INAP CS1.9
A.1 Guidance for completing the PICS proforma .9
A.1.1 Purpose and structure .9
A.1.2 Symbols, abbreviations and terms.9
A.1.3 Instructions for completing the PICS proforma.11
A.2 Identification of the implementation.12
A.2.1 Date of the statement .12
A.2.2 Implementation Under Test (IUT) identification .12
A.2.3 System Under Test (SUT) identification .12
A.2.4 Product supplier.12
A.2.5 Client.13
A.2.6 PICS contact person.14
A.3 Identification of the protocol .14
A.4 PICS proforma tables.14
A.4.1 Global statement of conformance.14
A.4.2 Physical entities .15
A.4.3 External interfaces .15
A.4.4 Application contexts.16
A.4.5 Operations .16
A.4.6 Arguments, results and errors .18
A.4.6.1 ActivateServiceFiltering.18
A.4.6.2 ActivityTest .20
A.4.6.3 ApplyCharging.21
A.4.6.4 ApplyChargingReport .22
A.4.6.5 AssistRequestInstructions.23
A.4.6.6 CallGap .24
A.4.6.7 CallInformationReport .26
A.4.6.8 CallInformationRequest.27
A.4.6.9 Cancel .28
A.4.6.10 CollectInformation .29
A.4.6.11 Connect .30
A.4.6.12 ConnectToResource .31
A.4.6.13 Continue .32
A.4.6.14 DisconnectForwardConnection .33
A.4.6.15 EstablishTemporaryConnection .33
A.4.6.16 EventNotificationCharging.34
A.4.6.17 EventReportBCSM .35
A.4.6.18 FurnishChargingInformation.36
A.4.6.19 InitialDP .37
A.4.6.20 InitiateCallAttempt .38

---------------------- Page: 5 ----------------------

SIST ETS 300 374-2:1997
Page 4
ETS 300 374-2: February 1996
A.4.6.21 PlayAnnouncement. 40
A.4.6.22 PromptAndCollectUserInformation. 42
A.4.6.23 ReleaseCall . 44
A.4.6.24 RequestNotificationChargingEvent. 45
A.4.6.25 RequestReportBCSMEvent . 46
A.4.6.26 ResetTimer . 47
A.4.6.27 SendChargingInformation. 48
A.4.6.28 ServiceFilteringResponse. 49
A.4.6.29 SpecializedResourceReport . 49
A.4.7 Timers . 50
A.4.8 Range constants . 52
History. 55

---------------------- Page: 6 ----------------------

SIST ETS 300 374-2:1997
Page 5
ETS 300 374-2: February 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols and
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS is part 2 of a multi-part standard covering the Capability Set 1 (CS1) core Intelligent Network
Protocol (INAP) as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma specification";
Part 5: "Protocol specification for the SCF-SDF interface";
Part 6: "PICS proforma specification for the SCF-SDF interface".
NOTE: Further parts of this standard may be identified later.
Transposition dates
Date of adoption of this ETS: 1 March 1996
Date of latest announcement of this ETS (doa): 31 May 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 November 1996
Date of withdrawal of any conflicting National Standard (dow): 30 November 1996

---------------------- Page: 7 ----------------------

SIST ETS 300 374-2:1997
Page 6
ETS 300 374-2: February 1996
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 374-2:1997
Page 7
ETS 300 374-2: February 1996
1 Scope
This second part of ETS 300 374 provides the Implementation Conformance Statement (ICS) proforma
for the core Intelligent Network Application Protocol (INAP) of Intelligent Network (IN) Capability Set 1
(CS1) defined in ETS 300 374-1 [1] in compliance with the relevant requirements, and in accordance with
the relevant guidance given in ISO/IEC 9646-7 [3].
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 374-1 (1994): "Intelligent Network (IN); Intelligent Network Capability
Set 1 (CS1); Core Intelligent Network Application Protocol (INAP); Part 1:
Protocol specification".
[2] ISO/IEC 9646-1: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 1: General concepts".
[3] ISO/IEC 9646-7: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 7: Implementation
Conformance Statements".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the following definitions apply:
- terms defined in ETS 300 374-1 [1];
- terms defined in ISO/IEC 9646-1 [2] and in ISO/IEC 9646-7 [3].
In particular, the following terms defined in ISO/IEC 9646-1 [2] apply:
Implementation Conformance Statement (ICS): A statement made by the supplier of an implementation
or system claimed to conform to a given specification, stating which capabilities have been implemented.
The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS, etc.
ICS proforma: A document, in the form of a questionnaire, which when completed for an implementation
or system becomes an ICS.
Protocol ICS (PICS): An ICS for an implementation or system claimed to conform to a given protocol
specification.

---------------------- Page: 9 ----------------------

SIST ETS 300 374-2:1997
Page 8
ETS 300 374-2: February 1996
3.2 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
AC Application Context
ASE Application Service Element
BCSM Basic Call State Model
CS1 Capability Set 1
ICS Implementation Conformance Statement
IN Intelligent Network
INAP Intelligent Network Application Protocol
IP Intelligent Peripheral
IUT Implementation Under Test
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
SCF Service Control Function
SCP Service Control Point
SCS System Conformance Statement
SRF Specialized Resource Function
SSF Service Switching Function
SSP Service Switching Point
SUT System Under Test
4 Conformance
If it claims to conform to this ETS, the actual PICS proforma to be filled in by a supplier shall be technically
equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering/naming
and ordering of the proforma items.
A PICS which conforms to this ETS shall be a conforming PICS proforma completed in accordance with
the instructions for completion given in clause A.1.

---------------------- Page: 10 ----------------------

SIST ETS 300 374-2:1997
Page 9
ETS 300 374-2: February 1996
Annex A (normative): PICS proforma for core INAP CS1
Notwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants that
users of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Guidance for completing the PICS proforma
A.1.1 Purpose and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of
the requirements defined in ETS 300 374-1 [1] may provide information about the implementation in a
standardized manner.
The PICS proforma is subdivided into clauses for the following categories of information:
- instructions for completing the ICS proforma;
- identification of the implementation;
- identification of the protocol;
- PICS proforma tables;
- global statement of conformance;
- physical entities;
- external interfaces;
- application contexts;
- operations;
- arguments, results and errors;
- timers;
- range constants.
A.1.2 Symbols, abbreviations and terms
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with
the guidelines presented in ISO/IEC 9646-7 [3].
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It
implicitly means "is supported by the implementation?".
Status column
The following notations, defined in ISO/IEC 9646-7 [3], are used for the status column:
m mandatory - the capability is required to be supported.
o optional - the capability may be supported or not.
n/a not applicable - in the given context, the capability cannot be used.
x prohibited (excluded) - there is a requirement not to use this capability in the
given context.
o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is
an integer which identifies an unique group of related optional items and the
logic of their selection which is defined immediately following the table.

---------------------- Page: 11 ----------------------

SIST ETS 300 374-2:1997
Page 10
ETS 300 374-2: February 1996
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on
the support of other optional or conditional items. "i" is an integer identifying an
unique conditional status expression which is defined immediately following the
table. For nested conditional expressions, the syntax "IF . THEN (IF . THEN
... ELSE...) ELSE ..." is used to avoid ambiguities.
Reference column
Entries in the reference column refer to subclauses of ETS 300 374-1 [1], except where explicitly stated
otherwise.
NOTE: A reference indicates only the location of the most essential information about an item.
All additional requirements contained in ETS 300 374-1 [1] have also to be taken into
account when making a statement about the conformance of that particular item.
Support column
The support column shall be filled in by the supplier of the implementation. The following common
notations, defined in ISO/IEC 9646-7 [3], are used for the support column:
Y or y supported by the implementation
N or n not supported by the implementation
N/A, n/a or - no answer required (allowed only if the status is n/a, directly or after evaluation
of a conditional status)
NOTE: As stated in ISO/IEC 9646-7 [3], support for a Protocol Data Unit (PDU) requires the
ability to parse all valid parameters of that PDU. Supporting a PDU while having no
ability to parse a valid parameter is non-conformant. Support for a parameter on a
PDU means that the semantics of that parameter are supported.
If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is
necessary to be able to answer that a capability is supported for one profile and not supported for another.
In that case, the supplier shall enter the unique reference to a conditional expression, preceded by "?"
(e.g. ?3). This expression shall be given in the cell provided at the bottom of the table. It uses predicates
defined in the System Conformance Statement (SCS), each of which refers to a single profile and which
takes the value TRUE if and only if that profile is to be used.
EXAMPLE: ?3: IF prof1 THEN Y ELSE N
It is further possible to provide comments to an answer at the bottom of each table.
Values allowed column
The values allowed column contains the values or the ranges of values allowed.
Values supported column
The values supported column shall be filled in by the supplier of the implementation. In this column, the
values or the ranges of values supported by the implementation shall be indicated.

---------------------- Page: 12 ----------------------

SIST ETS 300 374-2:1997
Page 11
ETS 300 374-2: February 1996
References to items
For each possible item answer (answer in the support column) within the PICS proforma exists a unique
reference, used, for example, in the conditional expressions. It is defined as the table identifier, followed
by a solidus character "/", followed by the item number in the table. If there is more than one support
column in a table, the columns shall be discriminated by letters (a, b, etc.), respectively.
EXAMPLE 1: A.5/4 is the reference to the answer of item 4 in table 5 of annex A.
EXAMPLE 2: A.6/3b is the reference to the second answer (i.e. in the second support column)
of item 3 in table 6 of annex A.
A.1.3 Instructions for completing the PICS proforma
The supplier of the implementation shall complete the PICS proforma in each of the spaces provided
using the notation described in subclause A.1.2.
Optional items in ETS 300 374-1 [1] are dealt with as follows:
- mandatory protocol items need to be supported by both operation invokers and responders;
- optional protocol items are optional for operation invokers, but mandatory for operation responders;
- network specific options are optional for both operation invokers and responders.
Table A.1 gives an overview of this rule tabular form.
Table A.1
Protocol item Invoke request Invoke indication
Mandatory m m
Optional o m
Network option o o
As a general rule, the ASN.1 "CHOICE" construct is indicated in the parameter tables:
- as an option (o.x) in the "Invoke request" column;
- as mandatory in the "Invoke indication" column.
When a (ASN.1) parameter which contains a "SIZE" field is not explicitly constrained in a table, then the
complete size field has to be supported.

---------------------- Page: 13 ----------------------

SIST ETS 300 374-2:1997
Page 12
ETS 300 374-2: February 1996
A.2 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System
Under Test (SUT)) should be filled in so as to provide as much detail as possible regarding version
numbers and configuration options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the
contact person.
A.2.1 Date of the statement
........................................................................................................................................................................
A.2.2 Implementation Under Test (IUT) identification
IUT name:
........................................................................................................................................................................
........................................................................................................................................................................
IUT version:
........................................................................................................................................................................
A.2.3 System Under Test (SUT) identification
SUT name:
........................................................................................................................................................................
........................................................................................................................................................................
Hardware configuration:
........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................
Operating system:
........................................................................................................................................................................
A.2.4 Product supplier
Name:
........................................................................................................................................................................
Address:
........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................

---------------------- Page: 14 ----------------------

SIST ETS 300 374-2:1997
Page 13
ETS 300 374-2: February 1996
Telephone number:
.........................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................
E-mail address:
.........................................................................................................................................................................
Additional information:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
A.2.5 Client
Name:
.........................................................................................................................................................................
Address:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................
E-mail address:
.........................................................................................................................................................................
Additional information:
.........................................................................................................................................................................
.........................................................................................................................................................................
.........................................................................................................................................................................

---------------------- Page: 15 ----------------------

SIST ETS 300 374-2:1997
Page 14
ETS 300 374-2: February 1996
A.2.6 PICS contact person
Name:
........................................................................................................................................................................
Telephone number:
........................................................................................................................................................................
Facsimile number:
........................................................................................................................................................................
E-mail address:
........................................................................................................................................................................
Additional information:
........................................................................................................................................................................
........................................................................................................................................................................
........................................................................................................................................................................
A.3 Identification of the protocol
This PICS proforma applies to the following standard:
ETS 300 374-1 (1994): "Intelligent Network (IN); Intelligent Network Capability Set 1 (CS1); Core
Intelligent Network Application Protocol (INAP); Part 1: Protocol specification".
A.4 PICS proforma tables
An explicit answer shall be entered, in eac
...