ETSI EN 301 908-2 V13.1.1 (2020-06)
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
REN/MSG-TFES-13-02
Celična omrežja IMT - Harmonizirani standard za dostop do radijskega spektra - 2. del: CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) (UE)
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 908-2 V13.1.1:2020
01-september-2020
Celična omrežja IMT - Harmonizirani standard za dostop do radijskega spektra - 2.
del: CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) (UE)
IMT cellular networks - Harmonised Standard for access to radio spectrum - Part 2:
CDMA Direct Spread (UTRA FDD) User Equipment (UE)
Ta slovenski standard je istoveten z: ETSI EN 301 908-2 V13.1.1 (2020-06)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.99 Druge mobilne storitve Other mobile services
SIST EN 301 908-2 V13.1.1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 908-2 V13.1.1:2020
---------------------- Page: 2 ----------------------
SIST EN 301 908-2 V13.1.1:2020
ETSI EN 301 908-2 V13.1.1 (2020-06)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
---------------------- Page: 3 ----------------------
SIST EN 301 908-2 V13.1.1:2020
2 ETSI EN 301 908-2 V13.1.1 (2020-06)
Reference
REN/MSG-TFES-13-02
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 908-2 V13.1.1:2020
3 ETSI EN 301 908-2 V13.1.1 (2020-06)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 12
3.3 Abbreviations . 13
4 Technical requirements specifications . 14
4.1 Environmental profile . 14
4.2 Conformance requirements . 14
4.2.0 General . 14
4.2.1 Introduction. 15
4.2.2 Transmitter maximum output power. 15
4.2.2.1 Transmitter maximum output power . 15
4.2.2.1.1 Definition. 15
4.2.2.1.2 Limits . 16
4.2.2.1.3 Conformance . 16
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 16
4.2.2.2.1 Definition for DC-HSUPA . 16
4.2.2.2.2 Limits for DC-HSUPA . 16
4.2.2.2.3 Conformance . 17
4.2.2.3 Transmitter maximum output power for UL OLTD . 17
4.2.2.3.1 Definition for UL OLTD . 17
4.2.2.3.2 Limits for UL OLTD . 17
4.2.2.3.3 Conformance . 17
4.2.3 Transmitter spectrum emission mask . 17
4.2.3.1 Transmitter spectrum emission mask . 17
4.2.3.1.1 Definition. 17
4.2.3.1.2 Limits . 17
4.2.3.1.3 Conformance . 18
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 18
4.2.3.2.1 Definition for DC-HSUPA . 18
4.2.3.2.2 Limits for DC-HSUPA . 18
4.2.3.2.3 Conformance . 19
4.2.3.3 Transmitter spectrum emission mask for UL OLTD . 19
4.2.3.3.1 Definition for UL OLTD . 19
4.2.3.3.2 Limits for UL OLTD . 19
4.2.3.3.3 Conformance . 19
4.2.3.4 Transmitter spectrum emission mask for UL CLTD Activation state 1 . 19
4.2.3.4.1 Definition for UL CLTD Activation state 1 . 19
4.2.3.4.2 Limits for UL CLTD Activation state 1 . 20
4.2.3.4.3 Conformance . 20
4.2.4 Transmitter spurious emis sions . 20
4.2.4.1 Transmitter spurious emissions . 20
4.2.4.1.1 Definition. 20
4.2.4.1.2 Limits . 20
4.2.4.1.3 Conformance . 23
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 23
4.2.4.2.1 Definition for DC-HSUPA . 23
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 908-2 V13.1.1:2020
4 ETSI EN 301 908-2 V13.1.1 (2020-06)
4.2.4.2.2 Limits for DC-HSUPA . 23
4.2.4.2.3 Conformance . 25
4.2.5 Transmitter minimum output power . 25
4.2.5.1 Transmitter minimum output power. 25
4.2.5.1.1 Definition. 25
4.2.5.1.2 Limits . 25
4.2.5.1.3 Conformance . 25
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 26
4.2.5.2.1 Definition for DC-HSUPA . 26
4.2.5.2.2 Limits for DC-HSUPA . 26
4.2.5.2.3 Conformance . 26
4.2.5.3 Transmitter minimum output power for UL CLTD Activation state 1 . 26
4.2.5.3.1 Definition for UL CLTD Activation state 1 . 26
4.2.5.3.2 Limits for UL CLTD Activation state 1 . 26
4.2.5.3.3 Conformance . 26
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 26
4.2.6.1 Definition . 26
4.2.6.2 Limits . 26
4.2.6.3 Conformance . 27
4.2.7 Receiver blocking characteristics . 27
4.2.7.1 Definition . 27
4.2.7.2 Limits . 27
4.2.7.3 Conformance . 29
4.2.8 Receiver spurious response . 29
4.2.8.1 Definition . 29
4.2.8.2 Limits . 29
4.2.8.3 Conformance . 29
4.2.9 Receiver intermodulation characteristics . 29
4.2.9.1 Definition . 29
4.2.9.2 Limits . 30
4.2.9.3 Conformance . 30
4.2.10 Receiver spurious emissions . 30
4.2.10.1 Definition . 30
4.2.10.2 Limits . 30
4.2.10.3 Conformance . 31
4.2.11 Out-of-synchronization handling of output power . 31
4.2.11.1 Definition . 31
4.2.11.2 Limits . 32
4.2.11.3 Conformance . 33
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 33
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 33
4.2.12.1.1 Definition. 33
4.2.12.1.2 Limits . 33
4.2.12.1.3 Conformance . 33
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 33
4.2.12.2.1 Definition for DC-HSUPA . 33
4.2.12.2.2 Limits for DC-HSUPA . 34
4.2.12.2.3 Conformance . 34
4.2.12.3 Adjacent channel leakage power ratio for UL OLTD . 34
4.2.12.3.1 Definition for UL OLTD . 34
4.2.12.3.2 Limits for UL OLTD . 34
4.2.12.3.3 Conformance . 34
4.2.12.4 Adjacent channel leakage power ratio for UL CLTD Activation state 1 . 34
4.2.12.4.1 Definition for UL CLTD Activation state 1 . 34
4.2.12.4.2 Limits for UL CLTD Activation state 1 . 35
4.2.12.4.3 Conformance . 35
4.2.13 Receiver Reference Sensitivity level . 35
4.2.13.0 General . 35
4.2.13.1 Definition . 35
4.2.13.2 Limits . 35
4.2.13.3 Conformance . 36
4.2.14 Receiver Total Radiated Sensitivity (TRS) . 36
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 908-2 V13.1.1:2020
5 ETSI EN 301 908-2 V13.1.1 (2020-06)
4.2.14.0 Applicability. 36
4.2.14.1 Definition . 36
4.2.14.2 Limits . 37
4.2.14.3 Conformance . 37
4.2.15 Total Radiated Power (TRP) . 37
4.2.15.0 Applicability. 37
4.2.15.1 Definition . 37
4.2.15.2 Limits . 38
4.2.15.3 Conformance . 39
5 Testing for compliance with technical requirements . 39
5.1 Environmental conditions for testing . 39
5.2 Interpretation of the measurement results . 39
5.3 Essential radio test suites . 39
5.3.0 General . 39
5.3.1 Transmitter maximum output power. 40
5.3.1.1 Method of test . 40
5.3.1.1.1 UTRA . 40
5.3.1.1.1A DC-HSUPA . 40
5.3.1.1.1B UL OLTD . 41
5.3.1.2 Test requirements . 41
5.3.2 Transmitter spectrum emission mask . 42
5.3.2.1 Method of test . 42
5.3.2.1.1 UEs not supporting HSDPA and/or E-DCH . 42
5.3.2.1.1A UEs supporting HSDPA and/or E-DCH . 42
5.3.2.1.1B DC-HSUPA . 43
5.3.2.1.1C UL OLTD . 43
5.3.2.1.1D UL CLTD Activation state 1 . 44
5.3.2.2 Test requirements . 45
5.3.3 Transmitter spurious emis sions . 45
5.3.3.1 Method of test . 45
5.3.3.1.1 UTRA . 45
5.3.3.1.1A DC-HSUPA . 45
5.3.3.2 Test requirements . 46
5.3.4 Transmitter minimum output power . 46
5.3.4.1 Method of test . 46
5.3.4.1.1 UTRA . 46
5.3.4.1.1A DC-HSUPA . 46
5.3.4.1.1B UL CLTD Activation state 1 . 47
5.3.4.2 Test requirements . 47
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 47
5.3.5.1 Method of test . 47
5.3.5.1.1 Initial conditions . 47
5.3.5.1.2 Procedure . 48
5.3.5.2 Test requirements . 48
5.3.6 Receiver blocking characteristics . 48
5.3.6.1 Method of test . 48
5.3.6.1.1 Initial requirements . 48
5.3.6.1.2 Procedure . 48
5.3.6.2 Test requirements . 49
5.3.7 Receiver spurious response . 49
5.3.7.1 Method of test .
...
ETSI EN 301 908-2 V13.1.1 (2020-06)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
---------------------- Page: 1 ----------------------
2 ETSI EN 301 908-2 V13.1.1 (2020-06)
Reference
REN/MSG-TFES-13-02
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 908-2 V13.1.1 (2020-06)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 12
3.3 Abbreviations . 13
4 Technical requirements specifications . 14
4.1 Environmental profile . 14
4.2 Conformance requirements . 14
4.2.0 General . 14
4.2.1 Introduction. 15
4.2.2 Transmitter maximum output power. 15
4.2.2.1 Transmitter maximum output power . 15
4.2.2.1.1 Definition. 15
4.2.2.1.2 Limits . 16
4.2.2.1.3 Conformance . 16
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 16
4.2.2.2.1 Definition for DC-HSUPA . 16
4.2.2.2.2 Limits for DC-HSUPA . 16
4.2.2.2.3 Conformance . 17
4.2.2.3 Transmitter maximum output power for UL OLTD . 17
4.2.2.3.1 Definition for UL OLTD . 17
4.2.2.3.2 Limits for UL OLTD . 17
4.2.2.3.3 Conformance . 17
4.2.3 Transmitter spectrum emission mask . 17
4.2.3.1 Transmitter spectrum emission mask . 17
4.2.3.1.1 Definition. 17
4.2.3.1.2 Limits . 17
4.2.3.1.3 Conformance . 18
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 18
4.2.3.2.1 Definition for DC-HSUPA . 18
4.2.3.2.2 Limits for DC-HSUPA . 18
4.2.3.2.3 Conformance . 19
4.2.3.3 Transmitter spectrum emission mask for UL OLTD . 19
4.2.3.3.1 Definition for UL OLTD . 19
4.2.3.3.2 Limits for UL OLTD . 19
4.2.3.3.3 Conformance . 19
4.2.3.4 Transmitter spectrum emission mask for UL CLTD Activation state 1 . 19
4.2.3.4.1 Definition for UL CLTD Activation state 1 . 19
4.2.3.4.2 Limits for UL CLTD Activation state 1 . 20
4.2.3.4.3 Conformance . 20
4.2.4 Transmitter spurious emis sions . 20
4.2.4.1 Transmitter spurious emissions . 20
4.2.4.1.1 Definition. 20
4.2.4.1.2 Limits . 20
4.2.4.1.3 Conformance . 23
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 23
4.2.4.2.1 Definition for DC-HSUPA . 23
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 908-2 V13.1.1 (2020-06)
4.2.4.2.2 Limits for DC-HSUPA . 23
4.2.4.2.3 Conformance . 25
4.2.5 Transmitter minimum output power . 25
4.2.5.1 Transmitter minimum output power. 25
4.2.5.1.1 Definition. 25
4.2.5.1.2 Limits . 25
4.2.5.1.3 Conformance . 25
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 26
4.2.5.2.1 Definition for DC-HSUPA . 26
4.2.5.2.2 Limits for DC-HSUPA . 26
4.2.5.2.3 Conformance . 26
4.2.5.3 Transmitter minimum output power for UL CLTD Activation state 1 . 26
4.2.5.3.1 Definition for UL CLTD Activation state 1 . 26
4.2.5.3.2 Limits for UL CLTD Activation state 1 . 26
4.2.5.3.3 Conformance . 26
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 26
4.2.6.1 Definition . 26
4.2.6.2 Limits . 26
4.2.6.3 Conformance . 27
4.2.7 Receiver blocking characteristics . 27
4.2.7.1 Definition . 27
4.2.7.2 Limits . 27
4.2.7.3 Conformance . 29
4.2.8 Receiver spurious response . 29
4.2.8.1 Definition . 29
4.2.8.2 Limits . 29
4.2.8.3 Conformance . 29
4.2.9 Receiver intermodulation characteristics . 29
4.2.9.1 Definition . 29
4.2.9.2 Limits . 30
4.2.9.3 Conformance . 30
4.2.10 Receiver spurious emissions . 30
4.2.10.1 Definition . 30
4.2.10.2 Limits . 30
4.2.10.3 Conformance . 31
4.2.11 Out-of-synchronization handling of output power . 31
4.2.11.1 Definition . 31
4.2.11.2 Limits . 32
4.2.11.3 Conformance . 33
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 33
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 33
4.2.12.1.1 Definition. 33
4.2.12.1.2 Limits . 33
4.2.12.1.3 Conformance . 33
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 33
4.2.12.2.1 Definition for DC-HSUPA . 33
4.2.12.2.2 Limits for DC-HSUPA . 34
4.2.12.2.3 Conformance . 34
4.2.12.3 Adjacent channel leakage power ratio for UL OLTD . 34
4.2.12.3.1 Definition for UL OLTD . 34
4.2.12.3.2 Limits for UL OLTD . 34
4.2.12.3.3 Conformance . 34
4.2.12.4 Adjacent channel leakage power ratio for UL CLTD Activation state 1 . 34
4.2.12.4.1 Definition for UL CLTD Activation state 1 . 34
4.2.12.4.2 Limits for UL CLTD Activation state 1 . 35
4.2.12.4.3 Conformance . 35
4.2.13 Receiver Reference Sensitivity level . 35
4.2.13.0 General . 35
4.2.13.1 Definition . 35
4.2.13.2 Limits . 35
4.2.13.3 Conformance . 36
4.2.14 Receiver Total Radiated Sensitivity (TRS) . 36
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 908-2 V13.1.1 (2020-06)
4.2.14.0 Applicability. 36
4.2.14.1 Definition . 36
4.2.14.2 Limits . 37
4.2.14.3 Conformance . 37
4.2.15 Total Radiated Power (TRP) . 37
4.2.15.0 Applicability. 37
4.2.15.1 Definition . 37
4.2.15.2 Limits . 38
4.2.15.3 Conformance . 39
5 Testing for compliance with technical requirements . 39
5.1 Environmental conditions for testing . 39
5.2 Interpretation of the measurement results . 39
5.3 Essential radio test suites . 39
5.3.0 General . 39
5.3.1 Transmitter maximum output power. 40
5.3.1.1 Method of test . 40
5.3.1.1.1 UTRA . 40
5.3.1.1.1A DC-HSUPA . 40
5.3.1.1.1B UL OLTD . 41
5.3.1.2 Test requirements . 41
5.3.2 Transmitter spectrum emission mask . 42
5.3.2.1 Method of test . 42
5.3.2.1.1 UEs not supporting HSDPA and/or E-DCH . 42
5.3.2.1.1A UEs supporting HSDPA and/or E-DCH . 42
5.3.2.1.1B DC-HSUPA . 43
5.3.2.1.1C UL OLTD . 43
5.3.2.1.1D UL CLTD Activation state 1 . 44
5.3.2.2 Test requirements . 45
5.3.3 Transmitter spurious emis sions . 45
5.3.3.1 Method of test . 45
5.3.3.1.1 UTRA . 45
5.3.3.1.1A DC-HSUPA . 45
5.3.3.2 Test requirements . 46
5.3.4 Transmitter minimum output power . 46
5.3.4.1 Method of test . 46
5.3.4.1.1 UTRA . 46
5.3.4.1.1A DC-HSUPA . 46
5.3.4.1.1B UL CLTD Activation state 1 . 47
5.3.4.2 Test requirements . 47
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 47
5.3.5.1 Method of test . 47
5.3.5.1.1 Initial conditions . 47
5.3.5.1.2 Procedure . 48
5.3.5.2 Test requirements . 48
5.3.6 Receiver blocking characteristics . 48
5.3.6.1 Method of test . 48
5.3.6.1.1 Initial requirements . 48
5.3.6.1.2 Procedure . 48
5.3.6.2 Test requirements . 49
5.3.7 Receiver spurious response . 49
5.3.7.1 Method of test . 49
5.3.7.1.1 Initial conditions . 49
5.3.7.1.2 Procedure . 49
5.3.7.2 Test requirements . 49
5.3.8 Receiver Intermodulation characteristics . 49
5.3.8.1 Method of test . 49
5.3.8.1.1 Initial conditions . 49
5.3.8.1.2 Procedure .
...
Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
Reference
REN/MSG-TFES-13-02
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 12
3.3 Abbreviations . 13
4 Technical requirements specifications . 14
4.1 Environmental profile . 14
4.2 Conformance requirements . 14
4.2.0 General . 14
4.2.1 Introduction. 15
4.2.2 Transmitter maximum output power. 15
4.2.2.1 Transmitter maximum output power . 15
4.2.2.1.1 Definition. 15
4.2.2.1.2 Limits . 16
4.2.2.1.3 Conformance . 16
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 16
4.2.2.2.1 Definition for DC-HSUPA . 16
4.2.2.2.2 Limits for DC-HSUPA . 16
4.2.2.2.3 Conformance . 17
4.2.2.3 Transmitter maximum output power for UL OLTD . 17
4.2.2.3.1 Definition for UL OLTD . 17
4.2.2.3.2 Limits for UL OLTD . 17
4.2.2.3.3 Conformance . 17
4.2.3 Transmitter spectrum emission mask . 17
4.2.3.1 Transmitter spectrum emission mask . 17
4.2.3.1.1 Definition. 17
4.2.3.1.2 Limits . 17
4.2.3.1.3 Conformance . 18
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 18
4.2.3.2.1 Definition for DC-HSUPA . 18
4.2.3.2.2 Limits for DC-HSUPA . 18
4.2.3.2.3 Conformance . 19
4.2.3.3 Transmitter spectrum emission mask for UL OLTD . 19
4.2.3.3.1 Definition for UL OLTD . 19
4.2.3.3.2 Limits for UL OLTD . 19
4.2.3.3.3 Conformance . 19
4.2.3.4 Transmitter spectrum emission mask for UL CLTD Activation state 1 . 19
4.2.3.4.1 Definition for UL CLTD Activation state 1 . 19
4.2.3.4.2 Limits for UL CLTD Activation state 1 . 20
4.2.3.4.3 Conformance . 20
4.2.4 Transmitter spurious emissions . 20
4.2.4.1 Transmitter spurious emissions . 20
4.2.4.1.1 Definition. 20
4.2.4.1.2 Limits . 20
4.2.4.1.3 Conformance . 23
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 23
4.2.4.2.1 Definition for DC-HSUPA . 23
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
4.2.4.2.2 Limits for DC-HSUPA . 23
4.2.4.2.3 Conformance . 25
4.2.5 Transmitter minimum output power . 25
4.2.5.1 Transmitter minimum output power. 25
4.2.5.1.1 Definition. 25
4.2.5.1.2 Limits . 25
4.2.5.1.3 Conformance . 25
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 26
4.2.5.2.1 Definition for DC-HSUPA . 26
4.2.5.2.2 Limits for DC-HSUPA . 26
4.2.5.2.3 Conformance . 26
4.2.5.3 Transmitter minimum output power for UL CLTD Activation state 1 . 26
4.2.5.3.1 Definition for UL CLTD Activation state 1 . 26
4.2.5.3.2 Limits for UL CLTD Activation state 1 . 26
4.2.5.3.3 Conformance . 26
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 26
4.2.6.1 Definition . 26
4.2.6.2 Limits . 27
4.2.6.3 Conformance . 27
4.2.7 Receiver blocking characteristics . 27
4.2.7.1 Definition . 27
4.2.7.2 Limits . 27
4.2.7.3 Conformance . 29
4.2.8 Receiver spurious response . 29
4.2.8.1 Definition . 29
4.2.8.2 Limits . 29
4.2.8.3 Conformance . 29
4.2.9 Receiver intermodulation characteristics . 29
4.2.9.1 Definition . 29
4.2.9.2 Limits . 30
4.2.9.3 Conformance . 30
4.2.10 Receiver spurious emissions . 30
4.2.10.1 Definition . 30
4.2.10.2 Limits . 30
4.2.10.3 Conformance . 31
4.2.11 Out-of-synchronization handling of output power . 31
4.2.11.1 Definition . 31
4.2.11.2 Limits . 32
4.2.11.3 Conformance . 33
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 33
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 33
4.2.12.1.1 Definition. 33
4.2.12.1.2 Limits . 33
4.2.12.1.3 Conformance . 33
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 33
4.2.12.2.1 Definition for DC-HSUPA . 33
4.2.12.2.2 Limits for DC-HSUPA . 34
4.2.12.2.3 Conformance . 34
4.2.12.3 Adjacent channel leakage power ratio for UL OLTD . 34
4.2.12.3.1 Definition for UL OLTD . 34
4.2.12.3.2 Limits for UL OLTD . 34
4.2.12.3.3 Conformance . 34
4.2.12.4 Adjacent channel leakage power ratio for UL CLTD Activation state 1 . 35
4.2.12.4.1 Definition for UL CLTD Activation state 1 . 35
4.2.12.4.2 Limits for UL CLTD Activation state 1 . 35
4.2.12.4.3 Conformance . 35
4.2.13 Receiver Reference Sensitivity level . 35
4.2.13.0 General . 35
4.2.13.1 Definition . 35
4.2.13.2 Limits . 35
4.2.13.3 Conformance . 36
4.2.14 Receiver Total Radiated Sensitivity (TRS) . 36
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
4.2.14.0 Applicability. 36
4.2.14.1 Definition . 36
4.2.14.2 Limits . 37
4.2.14.3 Conformance . 37
4.2.15 Total Radiated Power (TRP) . 37
4.2.15.0 Applicability. 37
4.2.15.1 Definition . 37
4.2.15.2 Limits . 38
4.2.15.3 Conformance . 39
5 Testing for compliance with technical requirements . 39
5.1 Environmental conditions for testing . 39
5.2 Interpretation of the measurement results . 39
5.3 Essential radio test suites . 40
5.3.0 General . 40
5.3.1 Transmitter maximum output power. 40
5.3.1.1 Method of test . 40
5.3.1.1.1 UTRA . 40
5.3.1.1.1A DC-HSUPA . 41
5.3.1.1.1B UL OLTD . 41
5.3.1.2 Test requirements . 42
5.3.2 Transmitter spectrum emission mask . 42
5.3.2.1 Method of test . 42
5.3.2.1.1 UEs not supporting HSDPA and/or E-DCH . 42
5.3.2.1.1A UEs supporting HSDPA and/or E-DCH . 43
5.3.2.1.1B DC-HSUPA . 43
5.3.2.1.1C UL OLTD . 44
5.3.2.1.1D UL CLTD Activation state 1 . 45
5.3.2.2 Test requirements . 45
5.3.3 Transmitter spurious emissions . 46
5.3.3.1 Method of test . 46
5.3.3.1.1 UTRA . 46
5.3.3.1.1A DC-HSUPA . 46
5.3.3.2 Test requirements . 47
5.3.4 Transmitter minimum output power . 47
5.3.4.1 Method of test . 47
5.3.4.1.1 UTRA . 47
5.3.4.1.1A DC-HSUPA . 47
5.3.4.1.1B UL CLTD Activation state 1 . 48
5.3.4.2 Test requirements . 48
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 48
5.3.5.1 Method of test . 48
5.3.5.1.1 Initial conditions . 48
5.3.5.1.2 Procedure . 49
5.3.5.2 Test requirements . 49
5.3.6 Receiver blocking characteristics . 49
5.3.6.1 Method of test . 49
5.3.6.1.1 Initial requirements . 49
5.3.6.1.2 Procedure . 49
5.3.6.2 Test requirements . 50
5.3.7 Receiver spurious response . 50
5.3.7.1 Method of test . 50
5.3.7.1.1 Initial conditions . 50
5.3.7.1.2 Procedure . 50
5.3.7.2 Test requirements . 50
5.3.8 Receiver Intermodulation characteristics . 50
5.3.8.1 Method of test . 50
5.3.8.1.1 Initial conditions . 50
5.3.8.1.2 Procedure .
...
SLOVENSKI STANDARD
oSIST prEN 301 908-2 V13.0.1:2020
01-junij-2020
Celična omrežja IMT - Harmonizirani standard za dostop do radijskega spektra - 2.
del: CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) (UE)
IMT cellular networks - Harmonised Standard for access to radio spectrum - Part 2:
CDMA Direct Spread (UTRA FDD) User Equipment (UE)
Ta slovenski standard je istoveten z: ETSI EN 301 908-2 V13.0.1 (2020-03)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.070.99 Druge mobilne storitve Other mobile services
oSIST prEN 301 908-2 V13.0.1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 301 908-2 V13.0.1:2020
---------------------- Page: 2 ----------------------
oSIST prEN 301 908-2 V13.0.1:2020
Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
HARMONISED EUROPEAN STANDARD
IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
---------------------- Page: 3 ----------------------
oSIST prEN 301 908-2 V13.0.1:2020
2 Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
Reference
REN/MSG-TFES-13-02
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 301 908-2 V13.0.1:2020
3 Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 7
Introduction . 8
1 Scope . 9
2 References . 10
2.1 Normative references . 10
2.2 Informative references . 10
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 12
3.3 Abbreviations . 13
4 Technical requirements specifications . 14
4.1 Environmental profile . 14
4.2 Conformance requirements . 14
4.2.0 General . 14
4.2.1 Introduction. 15
4.2.2 Transmitter maximum output power. 15
4.2.2.1 Transmitter maximum output power . 15
4.2.2.1.1 Definition. 15
4.2.2.1.2 Limits . 16
4.2.2.1.3 Conformance . 16
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 16
4.2.2.2.1 Definition for DC-HSUPA . 16
4.2.2.2.2 Limits for DC-HSUPA . 16
4.2.2.2.3 Conformance . 17
4.2.2.3 Transmitter maximum output power for UL OLTD . 17
4.2.2.3.1 Definition for UL OLTD . 17
4.2.2.3.2 Limits for UL OLTD . 17
4.2.2.3.3 Conformance . 17
4.2.3 Transmitter spectrum emission mask . 17
4.2.3.1 Transmitter spectrum emission mask . 17
4.2.3.1.1 Definition. 17
4.2.3.1.2 Limits . 17
4.2.3.1.3 Conformance . 18
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 18
4.2.3.2.1 Definition for DC-HSUPA . 18
4.2.3.2.2 Limits for DC-HSUPA . 18
4.2.3.2.3 Conformance . 19
4.2.3.3 Transmitter spectrum emission mask for UL OLTD . 19
4.2.3.3.1 Definition for UL OLTD . 19
4.2.3.3.2 Limits for UL OLTD . 19
4.2.3.3.3 Conformance . 19
4.2.3.4 Transmitter spectrum emission mask for UL CLTD Activation state 1 . 19
4.2.3.4.1 Definition for UL CLTD Activation state 1 . 19
4.2.3.4.2 Limits for UL CLTD Activation state 1 . 20
4.2.3.4.3 Conformance . 20
4.2.4 Transmitter spurious emissions . 20
4.2.4.1 Transmitter spurious emissions . 20
4.2.4.1.1 Definition. 20
4.2.4.1.2 Limits . 20
4.2.4.1.3 Conformance . 23
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 23
4.2.4.2.1 Definition for DC-HSUPA . 23
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 301 908-2 V13.0.1:2020
4 Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
4.2.4.2.2 Limits for DC-HSUPA . 23
4.2.4.2.3 Conformance . 25
4.2.5 Transmitter minimum output power . 25
4.2.5.1 Transmitter minimum output power. 25
4.2.5.1.1 Definition. 25
4.2.5.1.2 Limits . 25
4.2.5.1.3 Conformance . 25
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 26
4.2.5.2.1 Definition for DC-HSUPA . 26
4.2.5.2.2 Limits for DC-HSUPA . 26
4.2.5.2.3 Conformance . 26
4.2.5.3 Transmitter minimum output power for UL CLTD Activation state 1 . 26
4.2.5.3.1 Definition for UL CLTD Activation state 1 . 26
4.2.5.3.2 Limits for UL CLTD Activation state 1 . 26
4.2.5.3.3 Conformance . 26
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 26
4.2.6.1 Definition . 26
4.2.6.2 Limits . 27
4.2.6.3 Conformance . 27
4.2.7 Receiver blocking characteristics . 27
4.2.7.1 Definition . 27
4.2.7.2 Limits . 27
4.2.7.3 Conformance . 29
4.2.8 Receiver spurious response . 29
4.2.8.1 Definition . 29
4.2.8.2 Limits . 29
4.2.8.3 Conformance . 29
4.2.9 Receiver intermodulation characteristics . 29
4.2.9.1 Definition . 29
4.2.9.2 Limits . 30
4.2.9.3 Conformance . 30
4.2.10 Receiver spurious emissions . 30
4.2.10.1 Definition . 30
4.2.10.2 Limits . 30
4.2.10.3 Conformance . 31
4.2.11 Out-of-synchronization handling of output power . 31
4.2.11.1 Definition . 31
4.2.11.2 Limits . 32
4.2.11.3 Conformance . 33
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 33
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 33
4.2.12.1.1 Definition. 33
4.2.12.1.2 Limits . 33
4.2.12.1.3 Conformance . 33
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 33
4.2.12.2.1 Definition for DC-HSUPA . 33
4.2.12.2.2 Limits for DC-HSUPA . 34
4.2.12.2.3 Conformance . 34
4.2.12.3 Adjacent channel leakage power ratio for UL OLTD . 34
4.2.12.3.1 Definition for UL OLTD . 34
4.2.12.3.2 Limits for UL OLTD . 34
4.2.12.3.3 Conformance . 34
4.2.12.4 Adjacent channel leakage power ratio for UL CLTD Activation state 1 . 35
4.2.12.4.1 Definition for UL CLTD Activation state 1 . 35
4.2.12.4.2 Limits for UL CLTD Activation state 1 . 35
4.2.12.4.3 Conformance . 35
4.2.13 Receiver Reference Sensitivity level . 35
4.2.13.0 General . 35
4.2.13.1 Definition . 35
4.2.13.2 Limits . 35
4.2.13.3 Conformance . 36
4.2.14 Receiver Total Radiated Sensitivity (TRS) . 36
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 301 908-2 V13.0.1:2020
5 Draft ETSI EN 301 908-2 V13.0.1 (2020-03)
4.2.14.0 Applicability. 36
4.2.14.1 Definition . 36
4.2.14.2 Limits . 37
4.2.14.3 Conformance . 37
4.2.15 Total Radiated Power (TRP) . 37
4.2.15.0 Applicability. 37
4.2.15.1 Definition . 37
4.2.15.2 Limits . 38
4.2.15.3 Conformance . 39
5 Testing for compliance with technical requirements . 39
5.1 Environmental conditions for testing . 39
5.2 Interpretation of the measurement results . 39
5.3 Essential radio test suites . 40
5.3.0 General . 40
5.3.1 Transmitter maximum output power. 40
5.3.1.1 Method of test . 40
5.3.1.1.1 UTRA . 40
5.3.1.1.1A DC-HSUPA . 41
5.3.1.1.1B UL OLTD . 41
5.3.1.2 Test requirements . 42
5.3.2 Transmitter spectrum emission mask . 42
5.3.2.1 Method of test . 42
5.3.2.1.1 UEs not supporting HSDPA and/or E-DCH . 42
5.3.2.1.1A UEs supporting HSDPA and/or E-DCH . 43
5.3.2.1.1B DC-HSUPA . 43
5.3.2.1.1C UL OLTD . 44
5.3.2.1.1D UL CLTD Activation state 1 . 45
5.3.2.2 Test requirements . 45
5.3.3 Transmitter spurious emissions . 46
5.3.3.1 Method of test . 46
5.3.3.1.1 UTRA . 46
5.3.3.1.1A DC-HSUPA . 46
5.3.3.2 Test requirements . 47
5.3.4 Transmitter minimum output power . 47
5.3.4.1 Method of test . 47
5.3.4.1.1 UTRA . 47
5.3.4.1.1A DC-HSUPA . 47
5.3.4.1.1B UL CLTD Activation state 1 . 48
5.3.4.2 Test requirements . 48
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 48
5.3.5.1 Method of test . 48
5.3.5.1.1 Initial conditions . 48
5.3.5.1.2 Procedure . 49
5.3.5.2 Test requirements . 49
5.3.6 Receiver blocking characteristics . 49
5.3.6.1 Method of test . 49
5.3.6.1.1 Initial requirements . 49
5.3.6.1.2 Procedure . 49
5.3.6.2 Test requirements . 50
5.3.7 Receiver spurious response . 50
5.3.7.1 Method of test .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.