ETSI TS 131 101 V15.1.0 (2018-10)

Universal Mobile Telecommunications System (UMTS); LTE; UICC-terminal interface; Physical and logical characteristics (3GPP TS 31.101 version 15.1.0 Release 15)

RTS/TSGC-0631101vf10

General Information

• Status: Published
• Publication Date: 16-Oct-2018
• Technical Committee: 3GPP CT 6 - Smart Card Application Aspects (formely T3)
• Current Stage: 12 - Completion
• Completion Date: 17-Oct-2018

Standards Content (Sample)

ETSI TS 131 101 V15.1.0 (2018-10)






TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
UICC-terminal interface;
Physical and logical characteristics
(3GPP TS 31.101 version 15.1.0 Release 15)

---------------------- Page: 1 ----------------------
3GPP TS 31.101 version 15.1.0 Release 15 1 ETSI TS 131 101 V15.1.0 (2018-10)



Reference
RTS/TSGC-0631101vf10
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 31.101 version 15.1.0 Release 15 2 ETSI TS 131 101 V15.1.0 (2018-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 31.101 version 15.1.0 Release 15 3 ETSI TS 131 101 V15.1.0 (2018-10)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 7
3 Definitions, symbols, abbreviations and coding . 8
4 General 3GPP platform requirements . 8
4.1 GSM/USIM application interaction and restrictions . 8
4.2 3GPP platform overview . 8
4.3 TS 102 221 UICC/terminal interface. 9
4.4 TS 102 600 Inter-Chip USB UICC/terminal interface . 9
4A Physical Characteristics . 9
5 Physical and logical characteristics . 9
5.1 Transmission speed . 9
5.2 Voltage classes . 9
5.3 File Control Parameters (FCP) . 9
5.3.1 Minimum application clock frequency . 10
5.4 Interface protocol . 10
5A Electrical specifications of the UICC – Terminal interface . 10
5A.1 Class A operating conditions . 10
5A.2 Class B operating conditions . 10
5A.3 Class C operating conditions . 10
6 Application protocol . 10
6A Initial communication establishment procedures . 10
6A.1 UICC activation and deactivation. 10
6A.2 Supply voltage switching . 10
6A.3 Answer To Reset content . 10
6A.3.1 Coding of historical bytes . 10
6A.3.2 Speed enhancement. 11
6A.3.3 Global Interface bytes . 11
6A.4 PPS procedure . 11
6A.5 Reset procedures . 11
6A.6 Clock stop mode . 11
6A.7 Bit/character duration and sampling time . 11
6A.8 Error handling . 11
6A.9 Compatibility . 11
7 User verification and file access conditions . 11
7A Transmission protocols. 11
7A.1 Physical layer . 11
7A.2 Data link layer . 11
7A.3 Transport layer . 11
7A.4 Application layer . 12
8 Application and file structure . 12
8.0 General . 12
8.1 Contents of the EFs at the MF level . 12
8.2 File types . 13
8.3 File referencing . 13
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 31.101 version 15.1.0 Release 15 4 ETSI TS 131 101 V15.1.0 (2018-10)
8.4 Methods for selecting a file . 13
8.5 Application characteristics . 13
8.6 Reservation of file IDs . 13
8.7 Logical channels . 13
8.8 Shareable versus not-shareable files . 13
8.9 Secure channels . 13
9 Security features . 14
9.1 Supported security features . 14
9.2 Security architecture . 14
9.3 Security environment . 14
9.4 PIN definitions . 14
9.5 PIN and key reference relation ship . 14
9.6 User verification and file access conditions . 14
10 Structure of commands and responses . 15
10.1 Command APDU structure. 15
10.1.1 Coding of Class Byte . 15
10.1.2 Coding of Instruction Byte . 15
10.1.3 Coding of parameter bytes . 16
10.1.4 Coding of Lc byte . 16
10.1.5 Coding of data part . 16
10.1.6 Coding of Le byte . 16
10.2 Response APDU structure . 16
10.2.1 Status conditions returned by the UICC . 16
10.2.1.1 Normal processing . 16
10.2.1.2 Postponed processing . 16
10.2.1.3 Warnings . 16
10.2.1.4 Execution errors . 16
10.2.1.5 Checking errors . 16
10.2.1.5.1 Functions in CLA not supported . 16
10.2.1.5.2 Command not allowed . 16
10.2.1.5.3 Wrong parameters . 16
10.2.1.6 Application errors . 16
10.2.2 Status words of the commands . 16
10.3 Logical channels . 18
11 Commands . 18
11.1 Generic commands . 18
11.1.1 SELECT . 18
11.1.1.1 Functional description . 18
11.1.1.2 Command parameters and data . 18
11.1.1.3 Response Data . 18
11.1.1.4 File control parameters . 18
11.1.1.4.1 File size. 18
11.1.1.4.2 Total file size . 18
11.1.1.4.3 File Descriptor . 18
11.1.1.4.4 File identifier . 18
11.1.1.4.5 DF name . 18
11.1.1.4.6 Proprietary information . 18
11.1.1.4.7 Security attributes . 19
11.1.1.4.8 Short file identifier . 19
11.1.1.4.9 Life cycle status integer . 19
11.1.1.4.10 PIN status template DO . 19
11.1.2 STATUS . 19
11.1.3 READ BINARY . 19
11.1.4 UPDATE BINARY . 19
11.1.5 READ RECORD . 19
11.1.6 UPDATE RECORD . 19
11.1.7 SEARCH RECORD . 19
11.1.8 INCREASE . 19
11.1.9 VERIFY PIN . 19
11.1.10 CHANGE PIN . 19
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 31.101 version 15.1.0 Release 15 5 ETSI TS 131 101 V15.1.0 (2018-10)
11.1.11 DISABLE PIN . 19
11.1.12 ENABLE PIN . 19
11.1.13 UNBLOCK PIN . 19
11.1.14 DEACTIVATE FILE . 20
11.1.15 ACTIVATE FILE . 20
11.1.16 AUTHENTICATE . 20
11.1.17 MANAGE CHANNEL . 20
11.1.18 GET CHALLENGE . 20
11.1.19 TERMINAL CAPABILITY . 20
11.1.20 MANAGE SECURE CHANNEL . 20
11.1.21 TRANSACT DATA . 20
11.1.22 SUSPEND UICC . 20
11.2 CAT commands . 20
11.3 Data Oriented commands . 20
12 Transmission oriented commands . 20
13 Application independent files . 20
14 Application independent protocol . 21
14.1 Application independent protocol . 21
14.2 CAT commands . 21
15 Support of APDU-based UICC applications over USB . 21
Annex A (normative): . 22
UCS2 coding of Alpha fields for files residing on the UICC . 22
Annex B (informative): Main states of a UICC . 23
Annex C (informative): APDU protocol transmission examples . 24
Annex D (informative): ATR examples . 25
Annex E (informative): Security attributes mechanisms and examples . 26
Annex F (informative): Example of contents of EF '2F06' . 27
ARR
Annex G (informative): Access Rules Referencing (ARR) . 27
Annex H (normative): List of SFI Values . 28
Annex I (informative): Resets and modes of operation . 29
Annex J (informative): Example of the use of PINs . 30
Annex K (informative): Examples of the PIN state transition on multi verification capable
UICC . 31
Annex L (informative): Examples of SET DATA and RETRIEVE DATA u sage. 32
Annex M (informative): Examples of ODD AUTHENTICATE instruction code usage . 33
Annex N (informative): PCB layout for the MFF . 34
Annex O (informative): Change history . 35
History . 36

ETSI

---------------------- Page: 6 ----------------------
3GPP TS 31.101 version 15.1.0 Release 15 6 ETSI TS 131 101 V15.1.0 (2018-10)
Foreword
rd
This Technical Specification (TS) has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
Introduction
The present document defines a generic Terminal/Integrated Circuit Card (ICC) interface for 3GPP applications. The
present document is based on ETSI TS 102 221 [1], which defines a generic platform for any IC card application. The
functionality provided by this platform may be operated either over the electrical interface specified in
ETSI TS 102 221 [1], or by transporting APDUs over the Inter-Chip USB Terminal/ICC interface specified in
ETSI TS 102 600 [7].
Requirements that are common to all 3GPP smart card based applications are also listed in this specification.
The aim of the present document is to ensure interoperability between an ICC and a terminal independently of the
respective manufacturer, card issuer or operato
...