ETSI EN 301 061-1 V1.2.2 (1998-04)
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Generic functional protocol for the support of supplementary services at the b service entry point for Virtual Private Network (VPN) applications; Part 1: Protocol specification
Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Generic functional protocol for the support of supplementary services at the b service entry point for Virtual Private Network (VPN) applications; Part 1: Protocol specification
DEN/SPS-05110-1
Digitalno omrežje z integriranimi storitvami (ISDN) - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - Generični funkcijski protokol za podporo dopolnilnih storitev v vstopni točki "b" storitve za aplikacije navideznega zasebnega omrežja (VPN) - 1. del: Specifikacija protokola
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Generic functional protocol for the support of supplementary services at the b service entry point for Virtual Private Network (VPN) applications; Part 1: Protocol specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 061-1 V1.2.23SIST EN 301 061-1:en01-GHFHPEHU3SIST EN 301 061-1:SLOVENSKI
STANDARD
SIST EN 301 061-1:2001
EN 301 061-1 V1.2.2 (1998-04)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Digital Subscriber Signalling System No. one (DSS1) protocol;Generic functional protocol for the support ofsupplementary services at the "b" service entry point forVirtual Private Network (VPN) applications;Part 1: Protocol specificationSIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)2ReferenceDEN/SPS-05110-1 (9to90ipc.PDF)KeywordsDSS1, generic, ISDN, supplementary service,VPNETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frhttp://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)3ContentsIntellectual Property Rights.5Foreword.51Scope.62Normative references.63Definitions and abbreviations.73.1Definitions.73.2Abbreviations.74Coexistence of generic protocols for the control of supplementary services.84.1Support of various generic protocols.84.2Coexistence of generic protocols.84.3Arrangements by which coexistence of protocols may be supported by a network.85General principles applied for the functional control of supplementary services.85.1Introduction.85.2Scope of the procedures.85.3Categories of procedures.85.4VPN services in the context of CN.96Control of supplementary services using the separate message approach.97Control of supplementary services using the common information element approach.97.1General.97.1.1Introduction.97.1.2Scope of the procedures.97.1.3Distinction between public network and VPN context.97.2Procedures applicable for signalling in a VPN context.107.2.1Transport of components.107.2.1.1Bearer-related transport mechanism.107.2.1.1.1Protocol control requirements.107.2.1.1.2Generic Functional Transport (GFT)-Control requirements.107.2.1.2Connection-oriented bearer-independent transport mechanism.117.2.1.2.1Protocol control requirements.117.2.1.2.1.1Connection establishment at the originating interface.117.2.1.2.1.1.1Connection request.117.2.1.2.1.1.2Invalid connection information.117.2.1.2.1.1.3Call proceeding.127.2.1.2.1.1.4Connection connected.127.2.1.2.1.1.5Connection rejected.127.2.1.2.1.2Connection establishment at the destination interface.127.2.1.2.1.2.1Incoming connection.137.2.1.2.1.2.2Connection confirmation.137.2.1.2.1.2.3Called user clearing during incoming connection establishment.137.2.1.2.1.2.4Connection failure.137.2.1.2.1.2.5Connection accept.137.2.1.2.1.2.6Active indication.137.2.1.2.1.3Connection clearing.147.2.1.2.1.3.1Exception conditions.147.2.1.2.1.3.2Clearing initiated by the user.147.2.1.2.1.3.3Clearing initiated by the network.157.2.1.2.1.3.4Clear collision.157.2.1.2.1.4Interaction with restart procedure.157.2.1.2.1.5Interaction with call rearrangements.157.2.1.2.1.6Handling of error conditions.157.2.1.2.1.7Protocol timer values.167.2.1.2.2GFT-Control requirements.16SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)47.2.1.3Connectionless bearer-independent transport mechanism.168Generic notification procedures applicable in a VPN context.168.1Categories of notifications.168.2Non-standardized notifications.168.3Protocol control requirements.178.4GFT-Control requirements.179Application layer requirements.179.1Coordination Function requirements.179.2ROSE requirements.179.3ACSE requirements.179.4DSE requirements.179.5Non-standardized operations and non-standardized additions to standardised operations.1710Other generic procedures.1811Coding requirements.1811.1Message functional definitions and content.1811.1.1Messages for bearer-related signalling.1811.1.1.1FACILITY.1811.1.1.2NOTIFY.1911.1.2Messages for bearer-independent, connection-oriented signalling.1911.1.2.1CALL PROCEEDING.1911.1.2.2CONNECT.2011.1.2.3CONNECT ACKNOWLEDGE.2011.1.2.4FACILITY.2011.1.2.5RELEASE.2111.1.2.6RELEASE COMPLETE.2211.1.2.7SETUP.2311.1.2.8STATUS.2311.1.2.9STATUS ENQUIRY.2411.2General message format and information element coding.2411.2.1Facility.2411.2.2Notification indicator.2511.2.3Bearer capability.2611.2.4Channel identification.26Annex A (normative):Dynamic descriptions.28A.1Dynamic description of the Hold and Retrieve functions.28A.2Dynamic description of the status request procedure.28A.3Dynamic description of the supplementary service management function.28A.4Dynamic description of the connection oriented bearer independent transport mechanism.28Annex B (normative):Formal definition of data types.29Annex C (normative):Flow control.30History.31SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin ETR 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect ofETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSIWeb server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI Interim IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. Noguarantee can be given as to the existence of other IPRs not referenced in ETR 314 (or the updates on the ETSI Webserver) which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 1 of a multi-part European Standard (Telecommunications series) covering the IntegratedServices Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Generic functionalprotocol for the support of supplementary services for Virtual Private Network (VPN) applications, as identified below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP), user";Part 4:"Abstract Test Suite (ATS), user";Part 5:"Test Suite Structure and Test Purposes (TSS&TP), network";Part 6:"Abstract Test Suite (ATS), network".National transposition datesDate of adoption of this EN:3 April 1998Date of latest announcement of this EN (doa):31 July 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 January 1999Date of withdrawal of any conflicting National Standard (dow):31 January 1999SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)61ScopeThe present document specifies the generic functional protocol for the pan-European Integrated Services DigitalNetwork (ISDN) applicable at the "b" service entry point (as defined in EN 301 060-1 [3]). It is part of the DigitalSubscriber Signalling System No. one (DSS1) protocol.The generic functional protocol is based on the Facility information element and the FACILITY message, as well as onother specific functional messages. The protocol is symmetrical, and it is applicable to both basic and primary rateinterfaces.The generic functional protocol defined in the present document provides the means to exchange signalling informationfor the control of supplementary services over a Virtual Private Network (VPN). It does not by itself control anysupplementary service but rather provides generic services to specific supplementary service control entities.The application of the present document to individual supplementary services is outside the scope of the presentdocument and is defined in those standards which specify the individual supplementary services.Further part(s) of the present document specify the method of testing required to identify conformance to the presentdocument.The present document is applicable only to point-to-point access configurations.NOTE 1:The exchange of signalling information relating to the "b" service entry point is distinguished from theexchange of signalling information that is used to access public network services at the T reference point.The generic functional protocol applicable in a public network context is supported in accordance with therequirements of EN 300 196-1 [1]. The generic functional protocol specifically applicable in a VPNcontext is supported in accordance with the present document. The requirements have been defined suchthat both contexts can coexist on the same access, and this is expected to be a typical implementation.There is no requirement that when the provisions of the present document are implemented, the exchangeof signalling information relating to the T reference point also need to be implemented on the sameaccess. Where both contexts are implemented, the access resources are common to both contexts.NOTE 2:A service provider may support supplementary services applicable for public network calls in a VPNcontext. In this case the applicability of the individual public network supplementary services to a call in aVPN context is beyond the scope of the present document.2Normative referencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for thesupport of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification".[2]EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:Protocol specification [ITU-T Recommendation Q.911 (1993), modified]".SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)7[3]EN 301 060-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call applications: enhancement at the "b" service entry point forVirtual Private Network (VPN) applications; Part 1: Protocol specification".[4]ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 2: General protocol specification [ITU-TRecommendation Q.921 (1993), modified]".[5]ISO/IEC 11582 (1995): "Information technology - Telecommunication and information exchangebetween systems - Private Integrated Services Network - Generic functional protocol for thesupport of supplementary services - Inter-exchange signalling procedures and protocol".[6]ITU-T Recommendation X.219 (1988): "Remote operations: Model, notation and servicedefinition".[7]ITU-T Recommendation X.229 (1988): "Remote operations: Protocol specification".[8]ISO/IEC 15056 (1997): "Information technology - Telecommunications and information exchangebetween systems - Private Integrated Services Network - Inter-exchange signalling protocol -Transit counter additional network feature".3Definitions and abbreviations3.1DefinitionsClause 3 of EN 300 196-1 [1] shall apply with the following addition:Corporate telecommunication Network (CN): Consists of sets of equipment (Customer Premises Equipment and/orCustomer Premises Network) which are located at geographically dispersed locations and are interconnected to providenetworking services to a defined group of users.NOTE 1:The ownership of the equipment is not relevant to this definition.NOTE 2:In the present document, even equipment which is not geographically dispersed (e.g. a single PrivateIntegrated services Network eXchange (PINX) or Centrex-provided services to users at a single location)may form a CN.Call control message: A message as defined in EN 301 060-1 [3], subclause 7.1, which on sending or receipt causes achange of the call state at either the network or the user. Call control messages also include the INFORMATIONmessage and PROGRESS message.3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:ACSEAssociation Control Service ElementBCBearer CapabilityCNCorporate telecommunication NetworkDSEDialogue Service ElementDSS1Digital Subscriber Signalling System No. oneGFTGeneric Functional TransportISDNIntegrated Services Digital NetworkNCICSNetworked Call Independent, Connection-oriented SignallingNFENetwork Facility ExtensionNT2Network Termination 2
PINXPrivate Integrated services Network eXchangePSS1Private Signalling System No. OneTETerminal EquipmentVPNVirtual Private NetworkSIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)84Coexistence of generic protocols for the control ofsupplementary services4.1Support of various generic protocolsSubclause 5.1 of EN 300 196-1 [1] shall apply.4.2Coexistence of generic protocolsSubclause 5.2 of EN 300 196-1 [1] shall apply.In addition, the protocol described in the present document incorporates the functionality of the generic functionalprotocol described in EN 300 196-1 [1].4.3Arrangements by which coexistence of protocols may besupported by a networkSubclause 5.3 of EN 300 196-1 [1] shall apply.5General principles applied for the functional control ofsupplementary services5.1IntroductionThis subclause specifies the general principles applied for the functional control of supplementary services at the "b"service entry point (as defined in EN 301 060-1 [3]). The generic protocol utilizes functions and services provided byEN 300 403-1 [2] basic call procedures, as extended by EN 301 060-1 [3], and the functions of the data link layer asdefined in ETS 300 402-2 [4].5.2Scope of the proceduresThe procedures defined in the present document specify the basic methodology for the control (e.g. invocation,notification, deactivation, etc.) of supplementary services. The procedures are independent of whether or not the user-network interface is at a basic or primary rate access.5.3Categories of proceduresTwo categories of procedures are defined.The first category deals with the control of supplementary services in a public network context. For this category,subclause 6.3 of EN 300 196-1 [1] shall apply.The second category deals with the control of supplementary services in a VPN context.The entity that establishes a signalling relation shall indicate by means of the presence or absence of the VPN indicatorinformation element in which context the signalling information is to be interpreted. The VPN indicator informationelement and the associated procedures are described in EN 301 060-1 [3] and in subclause 7.1.3 of the presentdocument.SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)95.4VPN services in the context of CNSee subclause 5.1 of EN 301 060-1 [3].6Control of supplementary services using the separatemessage approachThese procedures shall be used only in a public network context. Clause 7 of EN 300 196-1 [1] shall apply.7Control of supplementary services using the commoninformation element approach7.1General7.1.1IntroductionIn the common information element approach, the Facility information element is used to transport information for thecontrol of supplementary services, conveying components as application-oriented elements complemented by thenecessary procedures for operations and transport mechanisms. Operations and transport mechanisms may either berelated to a connection or may be used independently of a connection.The common information element approach is modelled as remote operations as specified in ITU-T RecommendationsX.219 [6] and X.229 [7]. According to this model, one entity requests that a particular operation be performed whilst theresponding entity attempts to perform the operation and responds to the invoking entity. Therefore an operation of thecommon information element approach is regarded as a request/reply interaction, supported by the application functionand carried out within the context of an application association.An error is used to report the unsuccessful outcome of an operation. For each operation the appropriate errors, ifrequired, need to be indicated.7.1.2Scope of the proceduresSubclause 8.1.2 of EN 300 196-1 [1] shall apply.7.1.3Distinction between public network and VPN contextAn indication is necessary to distinguish between a public network or a VPN context.If an entity sends a message that establishes a call reference in a VPN context, it shall include a VPN indicatorinformation element in this message. If an entity sends such a message in a public network context, it shall not include aVPN indicator information element in this message.If an entity receives a message that establishes a call reference, and this message contains a VPN indicator informationelement, then the procedures for signalling in a VPN context shall apply for all messages that use this call reference.If an entity receives a message that establishes a call reference, and this message does not contain a VPN indicatorinformation element, then the procedures for signalling in a public network context shall apply for all messages that usethis call reference.If an entity receives a FACILITY message with the dummy call reference, and this message does not contain a VPNindicator information element, then the procedures for signalling in a public network context shall apply.SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)10If an entity receives a FACILITY message with the dummy call reference, and this message contains a VPN indicatorinformation element, then the procedures for signalling in a VPN context shall apply.NOTE:The present document does not specify the use of the dummy call reference in the FACILITY message.The receipt of a FACILITY message with the dummy call reference in a VPN context is an error, anderror handling procedures are applied.7.2Procedures applicable for signalling in a VPN context7.2.1Transport of components7.2.1.1Bearer-related transport mechanism7.2.1.1.1Protocol control requirementsThis subclause defines the transport of components using the messages for the establishment and the clearing of calls.The procedures for basic call control are described in EN 301 060-1 [3]. These procedures are not influenced by thecomponents carried. Bearer-related transport procedures and operations shall follow the specified procedures andtransport capabilities of bearer connections according to EN 301 060-1 [3]. The SETUP message shall contain the VPNindicator information element.For bearer-related transport of components, the cal
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Generic functional protocol for the support of supplementary services at the b service entry point for Virtual Private Network (VPN) applications; Part 1: Protocol specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 061-1 Version 1.2.2SIST EN 301 061-1:2001en01-februar-2001SIST EN 301 061-1:2001SLOVENSKI
STANDARD
SIST EN 301 061-1:2001
EN 301 061-1 V1.2.2 (1998-04)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Digital Subscriber Signalling System No. one (DSS1) protocol;Generic functional protocol for the support ofsupplementary services at the "b" service entry point forVirtual Private Network (VPN) applications;Part 1: Protocol specificationSIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)2ReferenceDEN/SPS-05110-1 (9to90ipc.PDF)KeywordsDSS1, generic, ISDN, supplementary service,VPNETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frhttp://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)3ContentsIntellectual Property Rights.5Foreword.51Scope.62Normative references.63Definitions and abbreviations.73.1Definitions.73.2Abbreviations.74Coexistence of generic protocols for the control of supplementary services.84.1Support of various generic protocols.84.2Coexistence of generic protocols.84.3Arrangements by which coexistence of protocols may be supported by a network.85General principles applied for the functional control of supplementary services.85.1Introduction.85.2Scope of the procedures.85.3Categories of procedures.85.4VPN services in the context of CN.96Control of supplementary services using the separate message approach.97Control of supplementary services using the common information element approach.97.1General.97.1.1Introduction.97.1.2Scope of the procedures.97.1.3Distinction between public network and VPN context.97.2Procedures applicable for signalling in a VPN context.107.2.1Transport of components.107.2.1.1Bearer-related transport mechanism.107.2.1.1.1Protocol control requirements.107.2.1.1.2Generic Functional Transport (GFT)-Control requirements.107.2.1.2Connection-oriented bearer-independent transport mechanism.117.2.1.2.1Protocol control requirements.117.2.1.2.1.1Connection establishment at the originating interface.117.2.1.2.1.1.1Connection request.117.2.1.2.1.1.2Invalid connection information.117.2.1.2.1.1.3Call proceeding.127.2.1.2.1.1.4Connection connected.127.2.1.2.1.1.5Connection rejected.127.2.1.2.1.2Connection establishment at the destination interface.127.2.1.2.1.2.1Incoming connection.137.2.1.2.1.2.2Connection confirmation.137.2.1.2.1.2.3Called user clearing during incoming connection establishment.137.2.1.2.1.2.4Connection failure.137.2.1.2.1.2.5Connection accept.137.2.1.2.1.2.6Active indication.137.2.1.2.1.3Connection clearing.147.2.1.2.1.3.1Exception conditions.147.2.1.2.1.3.2Clearing initiated by the user.147.2.1.2.1.3.3Clearing initiated by the network.157.2.1.2.1.3.4Clear collision.157.2.1.2.1.4Interaction with restart procedure.157.2.1.2.1.5Interaction with call rearrangements.157.2.1.2.1.6Handling of error conditions.157.2.1.2.1.7Protocol timer values.167.2.1.2.2GFT-Control requirements.16SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)47.2.1.3Connectionless bearer-independent transport mechanism.168Generic notification procedures applicable in a VPN context.168.1Categories of notifications.168.2Non-standardized notifications.168.3Protocol control requirements.178.4GFT-Control requirements.179Application layer requirements.179.1Coordination Function requirements.179.2ROSE requirements.179.3ACSE requirements.179.4DSE requirements.179.5Non-standardized operations and non-standardized additions to standardised operations.1710Other generic procedures.1811Coding requirements.1811.1Message functional definitions and content.1811.1.1Messages for bearer-related signalling.1811.1.1.1FACILITY.1811.1.1.2NOTIFY.1911.1.2Messages for bearer-independent, connection-oriented signalling.1911.1.2.1CALL PROCEEDING.1911.1.2.2CONNECT.2011.1.2.3CONNECT ACKNOWLEDGE.2011.1.2.4FACILITY.2011.1.2.5RELEASE.2111.1.2.6RELEASE COMPLETE.2211.1.2.7SETUP.2311.1.2.8STATUS.2311.1.2.9STATUS ENQUIRY.2411.2General message format and information element coding.2411.2.1Facility.2411.2.2Notification indicator.2511.2.3Bearer capability.2611.2.4Channel identification.26Annex A (normative):Dynamic descriptions.28A.1Dynamic description of the Hold and Retrieve functions.28A.2Dynamic description of the status request procedure.28A.3Dynamic description of the supplementary service management function.28A.4Dynamic description of the connection oriented bearer independent transport mechanism.28Annex B (normative):Formal definition of data types.29Annex C (normative):Flow control.30History.31SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin ETR 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect ofETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSIWeb server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI Interim IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. Noguarantee can be given as to the existence of other IPRs not referenced in ETR 314 (or the updates on the ETSI Webserver) which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 1 of a multi-part European Standard (Telecommunications series) covering the IntegratedServices Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1) protocol; Generic functionalprotocol for the support of supplementary services for Virtual Private Network (VPN) applications, as identified below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP), user";Part 4:"Abstract Test Suite (ATS), user";Part 5:"Test Suite Structure and Test Purposes (TSS&TP), network";Part 6:"Abstract Test Suite (ATS), network".National transposition datesDate of adoption of this EN:3 April 1998Date of latest announcement of this EN (doa):31 July 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 January 1999Date of withdrawal of any conflicting National Standard (dow):31 January 1999SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)61ScopeThe present document specifies the generic functional protocol for the pan-European Integrated Services DigitalNetwork (ISDN) applicable at the "b" service entry point (as defined in EN 301 060-1 [3]). It is part of the DigitalSubscriber Signalling System No. one (DSS1) protocol.The generic functional protocol is based on the Facility information element and the FACILITY message, as well as onother specific functional messages. The protocol is symmetrical, and it is applicable to both basic and primary rateinterfaces.The generic functional protocol defined in the present document provides the means to exchange signalling informationfor the control of supplementary services over a Virtual Private Network (VPN). It does not by itself control anysupplementary service but rather provides generic services to specific supplementary service control entities.The application of the present document to individual supplementary services is outside the scope of the presentdocument and is defined in those standards which specify the individual supplementary services.Further part(s) of the present document specify the method of testing required to identify conformance to the presentdocument.The present document is applicable only to point-to-point access configurations.NOTE 1:The exchange of signalling information relating to the "b" service entry point is distinguished from theexchange of signalling information that is used to access public network services at the T reference point.The generic functional protocol applicable in a public network context is supported in accordance with therequirements of EN 300 196-1 [1]. The generic functional protocol specifically applicable in a VPNcontext is supported in accordance with the present document. The requirements have been defined suchthat both contexts can coexist on the same access, and this is expected to be a typical implementation.There is no requirement that when the provisions of the present document are implemented, the exchangeof signalling information relating to the T reference point also need to be implemented on the sameaccess. Where both contexts are implemented, the access resources are common to both contexts.NOTE 2:A service provider may support supplementary services applicable for public network calls in a VPNcontext. In this case the applicability of the individual public network supplementary services to a call in aVPN context is beyond the scope of the present document.2Normative referencesReferences may be made to:a)specific versions of publications (identified by date of publication, edition number, version number, etc.), inwhich case, subsequent revisions to the referenced document do not apply; orb)all versions up to and including the identified version (identified by "up to and including" before the versionidentity); orc)all versions subsequent to and including the identified version (identified by "onwards" following the versionidentity); ord)publications without mention of a specific version, in which case the latest version applies.A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for thesupport of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol;Part 1: Protocol specification".[2]EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control; Part 1:Protocol specification [ITU-T Recommendation Q.911 (1993), modified]".SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)7[3]EN 301 060-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling SystemNo. one (DSS1) protocol; Basic call applications: enhancement at the "b" service entry point forVirtual Private Network (VPN) applications; Part 1: Protocol specification".[4]ETS 300 402-2: "Integrated Services Digital Network (ISDN); Digital Subscriber SignallingSystem No. one (DSS1) protocol; Data link layer; Part 2: General protocol specification [ITU-TRecommendation Q.921 (1993), modified]".[5]ISO/IEC 11582 (1995): "Information technology - Telecommunication and information exchangebetween systems - Private Integrated Services Network - Generic functional protocol for thesupport of supplementary services - Inter-exchange signalling procedures and protocol".[6]ITU-T Recommendation X.219 (1988): "Remote operations: Model, notation and servicedefinition".[7]ITU-T Recommendation X.229 (1988): "Remote operations: Protocol specification".[8]ISO/IEC 15056 (1997): "Information technology - Telecommunications and information exchangebetween systems - Private Integrated Services Network - Inter-exchange signalling protocol -Transit counter additional network feature".3Definitions and abbreviations3.1DefinitionsClause 3 of EN 300 196-1 [1] shall apply with the following addition:Corporate telecommunication Network (CN): Consists of sets of equipment (Customer Premises Equipment and/orCustomer Premises Network) which are located at geographically dispersed locations and are interconnected to providenetworking services to a defined group of users.NOTE 1:The ownership of the equipment is not relevant to this definition.NOTE 2:In the present document, even equipment which is not geographically dispersed (e.g. a single PrivateIntegrated services Network eXchange (PINX) or Centrex-provided services to users at a single location)may form a CN.Call control message: A message as defined in EN 301 060-1 [3], subclause 7.1, which on sending or receipt causes achange of the call state at either the network or the user. Call control messages also include the INFORMATIONmessage and PROGRESS message.3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:ACSEAssociation Control Service ElementBCBearer CapabilityCNCorporate telecommunication NetworkDSEDialogue Service ElementDSS1Digital Subscriber Signalling System No. oneGFTGeneric Functional TransportISDNIntegrated Services Digital NetworkNCICSNetworked Call Independent, Connection-oriented SignallingNFENetwork Facility ExtensionNT2Network Termination 2
PINXPrivate Integrated services Network eXchangePSS1Private Signalling System No. OneTETerminal EquipmentVPNVirtual Private NetworkSIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)84Coexistence of generic protocols for the control ofsupplementary services4.1Support of various generic protocolsSubclause 5.1 of EN 300 196-1 [1] shall apply.4.2Coexistence of generic protocolsSubclause 5.2 of EN 300 196-1 [1] shall apply.In addition, the protocol described in the present document incorporates the functionality of the generic functionalprotocol described in EN 300 196-1 [1].4.3Arrangements by which coexistence of protocols may besupported by a networkSubclause 5.3 of EN 300 196-1 [1] shall apply.5General principles applied for the functional control ofsupplementary services5.1IntroductionThis subclause specifies the general principles applied for the functional control of supplementary services at the "b"service entry point (as defined in EN 301 060-1 [3]). The generic protocol utilizes functions and services provided byEN 300 403-1 [2] basic call procedures, as extended by EN 301 060-1 [3], and the functions of the data link layer asdefined in ETS 300 402-2 [4].5.2Scope of the proceduresThe procedures defined in the present document specify the basic methodology for the control (e.g. invocation,notification, deactivation, etc.) of supplementary services. The procedures are independent of whether or not the user-network interface is at a basic or primary rate access.5.3Categories of proceduresTwo categories of procedures are defined.The first category deals with the control of supplementary services in a public network context. For this category,subclause 6.3 of EN 300 196-1 [1] shall apply.The second category deals with the control of supplementary services in a VPN context.The entity that establishes a signalling relation shall indicate by means of the presence or absence of the VPN indicatorinformation element in which context the signalling information is to be interpreted. The VPN indicator informationelement and the associated procedures are described in EN 301 060-1 [3] and in subclause 7.1.3 of the presentdocument.SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)95.4VPN services in the context of CNSee subclause 5.1 of EN 301 060-1 [3].6Control of supplementary services using the separatemessage approachThese procedures shall be used only in a public network context. Clause 7 of EN 300 196-1 [1] shall apply.7Control of supplementary services using the commoninformation element approach7.1General7.1.1IntroductionIn the common information element approach, the Facility information element is used to transport information for thecontrol of supplementary services, conveying components as application-oriented elements complemented by thenecessary procedures for operations and transport mechanisms. Operations and transport mechanisms may either berelated to a connection or may be used independently of a connection.The common information element approach is modelled as remote operations as specified in ITU-T RecommendationsX.219 [6] and X.229 [7]. According to this model, one entity requests that a particular operation be performed whilst theresponding entity attempts to perform the operation and responds to the invoking entity. Therefore an operation of thecommon information element approach is regarded as a request/reply interaction, supported by the application functionand carried out within the context of an application association.An error is used to report the unsuccessful outcome of an operation. For each operation the appropriate errors, ifrequired, need to be indicated.7.1.2Scope of the proceduresSubclause 8.1.2 of EN 300 196-1 [1] shall apply.7.1.3Distinction between public network and VPN contextAn indication is necessary to distinguish between a public network or a VPN context.If an entity sends a message that establishes a call reference in a VPN context, it shall include a VPN indicatorinformation element in this message. If an entity sends such a message in a public network context, it shall not include aVPN indicator information element in this message.If an entity receives a message that establishes a call reference, and this message contains a VPN indicator informationelement, then the procedures for signalling in a VPN context shall apply for all messages that use this call reference.If an entity receives a message that establishes a call reference, and this message does not contain a VPN indicatorinformation element, then the procedures for signalling in a public network context shall apply for all messages that usethis call reference.If an entity receives a FACILITY message with the dummy call reference, and this message does not contain a VPNindicator information element, then the procedures for signalling in a public network context shall apply.SIST EN 301 061-1:2001
ETSIEN 301 061-1 V1.2.2 (1998-04)10If an entity receives a FACILITY message with the dummy call reference, and this message contains a VPN indicatorinformation element, then the procedures for signalling in a VPN context shall apply.NOTE:The present document does not specify the use of the dummy call reference in the FACILITY message.The receipt of a FACILITY message with the dummy call reference in a VPN context is an error, anderror handling procedures are applied.7.2Procedures applicable for signalling in a VPN context7.2.1Transport of components7.2.1.1Bearer-related transport mechanism7.2.1.1.1Protocol control requirementsThis subclause defines the transport of components using the messages for the establishment and the clearing of calls.The procedures for basic call control are described in EN 301 060-1 [3]. These procedures are not influenced by thecomponents carried. Bearer-related transport procedures and operations shall follow the specified procedures andtransport capabilities of bearer connections according to EN 301 060-1 [3]. The SETUP message shall contain the VPNindicator information element.For bearer-related transport of co
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.