ETSI TR 102 022-2 V1.2.1 (2018-01)

User Requirements Specification; Mission Critical Broadband Communications; Part 2: Critical Communications Application

RTR/TCCE-01204

General Information

• Status: Published
• Publication Date: 16-Jan-2018
• Technical Committee: TCCE 1 - TCCE User Requirements / Services
• Current Stage: 12 - Completion
• Due Date: 11-Jan-2018
• Completion Date: 17-Jan-2018

Standards Content (Sample)

ETSI TR 102 022-2 V1.2.1 (2018-01)






TECHNICAL REPORT
User Requirements Specification;
Mission Critical Broadband Communications;
Part 2: Critical Communications Application

---------------------- Page: 1 ----------------------
2 ETSI TR 102 022-2 V1.2.1 (2018-01)



Reference
RTR/TCCE-01204
Keywords
evolution, requirements, TETRA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TR 102 022-2 V1.2.1 (2018-01)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 8
4 Critical Communications Application Requirements . 10
4.1 General . 10
4.1.0 Introduction. 10
4.1.1 Description of Interfaces in Figures 1 to 3 . 12
4.2 Group Addressed Services . 16
4.2.0 General . 16
4.2.1 Emergency communication . 18
4.2.2 Dispatcher Override . 19
4.2.3 Local Fall Back . 19
4.3 Priority and Pre-Emption Services . 20
4.4 Off Network Services . 21
4.4.0 General . 21
4.4.1 Public Safety Specific Requirements for Off Network Services . 21
4.4.2 Local network Extension . 22
4.5 Calling/Talking Party Identity Restriction . 23
4.6 Interoperability with Legacy Systems . 23
4.7 Support for White Boarding and other Multi-Media Operations. 24
4.8 Dispatching - a Video Case . 24
4.9 Video Briefing . 24
4.10 Net Preference . 24
4.11 Dual Watch . 24
5 Voice Requirements . 24
5.0 General . 24
5.1 Intelligibility in Noisy Environments . 25
5.2 Call Set up Time . 25
6 Security. 25
7 Priorities for Functionality . 25
8 Summary of Baseline TETRA and Tetrapol Services and Exceptions to their Transfer to
Broadband Requirements (adopted from TETRA04(13)000074r2-Use-of-TETRA-services) . 29
Annex A: Functionality Split Proposal for Group Addressed Calls from 3GPP (Preliminary
view) . 34
Annex B: Visualization of Relay Node Use . 36
Annex C: Possible Progression of Interoperability Requirement . 38
Annex D: Extract from 3GPP TS 22.278 V12.4.0 (2013-09) . 41
Annex E: Requirements from Project Broadmap. 44
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TR 102 022-2 V1.2.1 (2018-01)
History . 45

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TR 102 022-2 V1.2.1 (2018-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Report (TR) has been produced by ETSI Technical Committee TETRA and Critical Communications
Evolution (TCCE).
The present document is part 2 of a multi-part deliverable covering the User Requirement Specification (URSs) Mission
Critical Broadband Communications, as identified below:
Part 1: "Mission Critical Broadband Communication Requirements";
Part 2: "Critical Communications Application".
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The Terms of Reference for TC TCCE approved at ETSI Board meeting #42, 2013 is to produce ETSI deliverables (and
maintenance thereafter) in accordance with the following requirements:
a) To identify requirements for mission and business critical broadband services that will enable an evolution of
digital narrowband PMR services to mobile broadband.
b) To identify and fill standardization gaps such as:
1) Architectural design of critical communications services to be delivered over mobile broadband systems.
2) The development of standards for secure services and interfaces into private and commercial broadband
systems.
3) Interconnection of external PMR interfaces to critical communications systems.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TR 102 022-2 V1.2.1 (2018-01)
c) The provision and development of proportionate security measures for TETRA and mission critical
communications services.
d) The selection and development of suitable CODECs for audio and video services.
e) The evolution and enhancement of TETRA and critical communications services as required by the market
with the provision of new services, facilities and functionality made possible by new technology innovations
and standards.
f) To identify requirements for the further development of the TETRA standard.
g) The maintenance of the TETRA standard.
Technical Objective:
• The present document provides the User Requirement Specifications for the Critical Communications
Application that facilitates digital PMR services over LTE™.
• The URS is required by TC TCCE to guide the design of the critical communications application to facilitate
broadband voice and data communications for critical communications users.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TR 102 022-2 V1.2.1 (2018-01)
1 Scope
The present document provides the User Requirement Specifications for the Critical Communications Application
needed to support Broadband Mission Critical Communications over IP communications networks such as LTE.
The present document describes the functionalities which are most needed by users and the requirements they make on
the technology. The present document is applicable to the specification of broadband mission critical communications
equipment.
The user requirements contained in the present document are described in non-technical terms and are based on
discussions in TC TCCE WG1, TC TCCE WG4, LEWP RCEG and TCCA's CCBG SA and UR Groups.
2 References
2.1 Normative references
Normative references are not applicable in the present document.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TS 122 468 (V12.1.0): "LTE; Group Communication System Enablers for LTE (GCSE-
LTE) (3GPP TS 22.468 version 12.1.0 Release 12)".
[i.2] ETSI TS 122 278 (V12.5.0): "Universal Mobile Telecommunications System (UMTS); LTE;
Service requirements for the Evolved Packet System (EPS) (3GPP TS 22.278 version 12.5.0
Release 12)".
[i.3] ETSI TR 102 022-1: "User Requirement Specification; Mission Critical Broadband
Communication Requirements".
[i.4] NPSTC Recommendations for Push To Talk over Long Term Evolution Requirements, Public
Safety Broadband. A NPSTC Public Safety Communications Report.
[i.5] ETSI EN 300 392-9: "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 9:
General requirements for supplementary services".
[i.6] ETSI EN 300 392-12 (sub-parts 1, 3, 7, 8, 10, 16 and 22) : "Terrestrial Trunked Radio (TETRA);
Voice plus Data (V+D); Part 12: Supplementary services stage 3".
[i.7] 3GPP TS 22.278 (V12.4.0): "Service requirements for the Evolved Packet System (EPS)".
[i.8] Proximity-based Off Network Public Safety Use Case S1-113165 to 3GPP TSG-SA WG1 from
NIST et al.
[i.9] Requirements associated with Public Safety Off Network Use Case S1-113165 to 3GPP TSG-SA
WG1 from NIST.
[i.10] Tetrapol Specifications PAS 0001-1-2 (V3.0.1): "Part 1: "General Network Design: Part 2: Voice
and Data Services in Network and Direct Mode".
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TR 102 022-2 V1.2.1 (2018-01)
[i.11] WG4 WI DTR/TCCE-04186: "TCCE Critical Communications Architecture Reference Model".
[i.12] ETSI EN 300 392-1 (V1.4.1): "Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D);
Part 1: General network design".
[i.13] TETRA04(13)000074r2-Use-of-TETRA-services (Work in progress for ETSI TCCE04).
[i.14] "Finlands 5 Steps to Critical Broadband", Vinkvist, Pesonen and Peltola, Radio nResource
International Q4 2014.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
Base Station (BS): set of equipment on a single site (which may be more than just a radio function)
mission critical broadband communications: work programme within ETSI Technical Committee TETRA and
Critical Communications Evolution to facilitate and enhance the services and facilities of digital PMR such as TETRA
operating over LTE in order to meet new user requirements for data and voice
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
AL Ambience Listening
ASSI Alias Short Subscriber Identity
AVL Automatic Vehicle Location
BS Base Station
CA Conventional Access
CCA Critical Communications Application
CCBG Critical Communications Broadband Group
CCS Critical Communication System
CLIR Calling Line Identification Restriction
COMM Common
DA Direct Access
DGNA Dynamic Group Number Assignment
DISC DISCovery
NOTE: Not in the ETSI list.
DMO Direct Mode of Operation
DTMF Dual Tone Multi Frequency
EPC Evolved Packet Core
ETSI European Telecommunications Standards Institute
E-UTRAN Evolved Universal Terrestrial Radio Access Network
FFS For Further Study
GCSE Group Call Service Enablers
GPS Global Positioning System
GSCE Group Communication System Enablers
IP Internet Protocol
ISI Inter System Interface
KPI Key Performance Indicator
LEWP Law Enforcement Working Party
LMR Land Mobile Radio
LTE 3GPP Long Term Evolution (4G)
MC Mission Critical
MCPTT Mission Critical Press to Talk
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TR 102 022-2 V1.2.1 (2018-01)
ME Mobile Equipment
MM Mobility Management
MS Mobile Station
MU Mobile Unit comprising UE plus CCA
MVNO Mobile Virtual Network Operator
NIST National Institute of Standards and Technology (USA)
NPSTC National Public Safety Telecommunications Council (not in the ETSI list)
OPS Operations
PABX Private Automatic Branch eXchange
PMR Private Mobile Radio
PPDR Public Protection and Disaster Recovery
ProSe Proximity Services
PSTN Public Services Telephone Network
PTT Press to Talk
QoS Quality of Service
RCEG Radio Communications Experts Group, a working group of LEWP
RF Radio Frequency
SA System Architecture
NOTE: Technical Specification Group of 3GPP.
SDS Short Data Service
SDS-TL SDS-Transport Layer
SIM Subscriber Identity Module
SLA Service Level Agreement
TA Tracking Area
TCCA TETRA + Critical Communications Association
TCCE TETRA and Critical Communications Evolution
TL Transport Layer
TPI Talking Party Identity
TR Technical Report
UE User Equipment
UR User Requirements
URS User Requirement Specification
USIM Universal Subscriber Identity Module
UTRA Universal Terrestrial Radio Access
UTRAN Universal Terrestrial Radio Access Network
ETSI

---------------------- Page: 9 ----------------------
10 ETSI TR 102 022-2 V1.2.1 (2018-01)
4 Critical Communications Application Requirements
4.1 General
4.1.0 Introduction
In order to ensure that IP communications networks such as LTE are able to meet the requirements of critical
communications some changes to the 3GPP™ standards are needed. The most critical have been proposed first and are
called Group Communication System Enablers (GCSE) [i.1] and Proximity Based Services (ProSE) [i.2]. These have
resulted in 3GPP Work Items for Release 12. There are likely to be further requirements. In order to benefit from the
market scale available for public LTE and the attendant benefits such as lower cost, open standards, supplier choice, fast
development of features and long term evolution of capability the changes proposed to date have been kept to a
minimum to improve the chances of them being implemented by manufacturers. This means that to deliver the full
mission critical/critical communications functionality there has to be a Critical Communications Application (CCA) that
sits above the LTE protocol. This application will need to provide the services required for critical communications
[i.3]. (One of these services is push or press to talk, and NPSTC have recommended requirements for Public Safety in
the US [i.4]. Outside of North America the PTT voice functionality of TETRA [i.5], [i.6], [i.12] and Tetrapol [i.10] is
taken as an assumed baseline on top of which further functionality appropriate to broadband is added. To avoid
describing all the many standards a summary of this functionality and the exceptions, that is baseline functionality not
needed in broadband are listed in clause 8). The application will need to have implementations in the infrastructure and
in terminals with a standardized interface between them so that different vendors can be used.
It is important that the standardization of the CCA should be rapid and co-ordinated to match planned releases of the
3GPP standard containing the appropriate enablers. A phased approach is considered but whilst most user groups want
to focus on data services there are some groups, for example in the UK working on their future mission critical
communications, who want to rapidly transition to voice services as well. This means that the first release of the CCA
has to support core voice and data requirements with extensions in functionality coming in later releases.
There are different needs for supporting migration away from legacy systems depending on the plans in the various user
groups for the rate of migration. Some users groups see little need to operate with legacy systems and others see a
sustained period of inter-working. The level of interoperability required also varies but there is clearly a need for the
first release of the CCA to support some interaction with legacy systems with fuller integration coming later for those
who wish to operate their legacy systems for voice and narrowband data for a longer period alongside broadband data or
voice and data systems. This is dealt with in more detail in clause 7.
Some thoughts have been given to the partition between functionality to be supported in 3GPP and that by the CCA
(annex A). This led to a model of the architecture for Mission Critical Broadband Communications from TCCA CCBG
WG SA that defined the requirements of the CCA. This model is being developed in TCCE WG4 [i.11] and a version of
this is shown below purely to illustrate the scope of the requirements to be addressed. This diagram will not be updated
in this URS.
ETSI

---------------------- Page: 10 ----------------------
11 ETSI TR 102 022-2 V1.2.1 (2018-01)

Figure 1: CCS Reference Model
ETSI

---------------------- Page: 11 ----------------------
12 ETSI TR 102 022-2 V1.2.1 (2018-01)

Figure 2: Proximity Services Reference Model

Figure 3:Terminal to Network Relay Reference Model
4.1.1 Description of Interfaces in Figures 1 to 3
Interface 1 LTE Core Network - UE
This interface is specified according to the network protocols of the underlying IP network. Where the underlying
network is LTE, it consists of the 3GPP specified standardized LTE UE to EPC interfaces.
ETSI

---------------------- Page: 12 ----------------------
13 ETSI TR 102 022-2 V1.2.1 (2018-01)
Interface 2 Infra CCA - LTE Core Network
This interface is specified according to the network protocols of the underlying IP network.
Where that underlying network is an LTE EPC, it consists of existing Rx and SGi interfaces, plus the GC2 interface
developed in the GCSE-LTE work item from 3GPP Release 12, to allow use and control of LTE broadcast bearers.
Interface 3 LTE UE to Mobile CCA
This interface relies on the services available from the IP network terminal.
In an LTE environment, it utilizes the interfaces provided by the UE to any application and may evolve to include
developments related to GCSE-LTE work item from 3GPP Release 12.
This interface itself is not fully standardized since it is dependent on the terminal implementation and operating system.
Interface 4 Infra CCA to Mobile CCA
The objective of this interface is to allow interoperability between a CCA infrastructure and terminals from different
manufacturers.
This interface provides similar functionality to existing digital PMR Layer 3 Air Interface messages, supporting, but not
limited to, user registration, setup and control of individual and group communications, media transfer and management
and short data transport.
Interface 5 Infra CCA to Application
The objective of this interface is to allow easy integration of Applications in a CCA environment, and portability of
those applications to CCAs from different manufacturers.
This interface is made of two main components:
• A Call interface, to provide control of sessions (C-Plane) and of media transport (U-Plane) within a
communication. This interface may be similar to a Dispatch interface in existing PMR systems, extended to
Multimedia.
NOTE 1: A single communication session can be an organized set of one or more communications used to transport
the same information to or from one or several mobiles. Independent sessions implies that there can be
several separate communications taking place between different sets of parties which can be accessed
through this interface.
• A Routed Transport interface to transport and route data messages (e.g. signalling, geo-location information,
text messages) and data files (e.g. picture, map) between mobiles and applications.
Interface 6 Mobile CCA to Mobile Application
The objective of this interface is to allow easy integration of Mobile Applications in a CCA environment, and
portability of those applications between terminals from different manufacturers.
Interface 7 Application to Mobile Application
Some components of this interface may be defined by standards, for specific applications that require generic formats to
ensure interoperability between mobile applications and control room application for instance: geo-location, video
format, vocoder, etc.
Interface 8 Inter CCA
The objective of this interface is to allow interoperability and interworking between CCS.
This interface supports interconnection of communications between users operating on different CCS.
This interface should support mobility of users between different CCS.
ETSI

---------------------- Page: 13 ----------------------
14 ETSI TR 102 022-2 V1.2.1 (2018-01)
Interface 8b CCA to Legacy PMR
The objective of this interface is to allow interworking between a CCS and existing legacy PMR systems such as
TETRA, TETRAPOL and P25.
This interface is intended to support interconnection of communications between users operating on a CCS and on a
legacy PMR system.
Interface 9 Core Network to Core Network
This interface is determined by the underlying core IP network. Where the underlying network is an LTE EPC, it makes
use of 3GPP standard interfaces.
This interface provides support and control of mobility and roaming of terminals between different core networks.
NOTE 2: Where the underlying core networks use different technologies, a standardized interface may not be
available.
Interface 10 Terminal to Terminal
This interface is determined by the terminal technology.
Where the terminals are LTE Ues, this interface will be a standard 3GPP interface, defined under the Proximity
Services (ProSe) work item in 3GPP Release 12.
This interface supports direct communications between terminals and also the terminal to Network Relay configuration.
Interface 11 Mobile CCA to Mobile CCA
The objective of this interface is to provide control of direct CCA Services between two or more terminals without any
infrastructure path. Where the terminals are LTE Ues, it relies on underlying services defined by 3GPP ProSe.
Interface 12 Infra CCA to Relay CCA
The objective of this interface is to support the specific configuration of a Terminal to Network Relay. This interface
can be considered to be a subset of the interface 4 Infra CCA to Mobile CCA.
Interface 13 Mobile CCA to Relay CCA
The objective of this interface is to support the specific configuration of a Terminal to Network Relay. This interface
can be considered to be a subset of the interface 11 Mobile CCA to Mobile CCA.
CCA Features
User Management
– on top of device mobility
–Single Sign On
Group Management
Communication Control
– Handling the communication tree (connecting different transport sessions if needed)
– Individual and Group
– Floor Control (or exclusive transmitter within one session)
– Supplementary services
Session Control
– Set up, Release, priorities,… (C-Plane) of transport sessions
...