ETSI EN 305 550 V2.1.0 (2017-10)
Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Harmonised Standard for access to radio spectrum
Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Harmonised Standard for access to radio spectrum
REN/ERM-TGUWB-153
Naprave kratkega dosega (SRD) - Radijska oprema, ki se uporablja v frekvenčnem območju od 40 GHz do 246 GHz - Harmonizirani standard za dostop do radijskega spektra
General Information
Buy Standard
Standards Content (Sample)
Draft ETSI EN 305 550 V2.1.0 (2017-10)
HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD);
Radio equipment to be used
in the 40 GHz to 246 GHz frequency range;
Harmonised Standard for access to radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 305 550 V2.1.0 (2017-10)
Reference
REN/ERM-TG28-509
Keywords
harmonised standard, radio, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 305 550 V2.1.0 (2017-10)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental conditions . 11
4.2 General . 11
4.2.1 Background information . 11
4.2.2 Wanted performance criteria. 11
4.3 Transmitter Conformance Requirements . 12
4.3.1 Permitted range of operating frequencies . 12
4.3.1.1 Applicability. 12
4.3.1.2 Description . 12
4.3.1.3 Limits . 12
4.3.1.4 Conformance . 12
4.3.2 Operating frequency range(s) (OFR) . 12
4.3.2.1 Applicability. 12
4.3.2.2 Description . 12
4.3.2.3 Limits . 13
4.3.2.4 Conformance . 13
4.3.3 Mean Power . 13
4.3.3.1 Applicability. 13
4.3.3.2 Description . 14
4.3.3.3 Limits . 14
4.3.3.4 Conformance . 14
4.3.4 Mean Power spectral density . 14
4.3.4.1 Applicability. 14
4.3.4.2 Description . 14
4.3.4.3 Limits . 14
4.3.4.4 Conformance . 15
4.3.5 Unwanted emissions in the out-of-band domain . 15
4.3.5.1 Applicability. 15
4.3.5.2 Description . 15
4.3.5.3 Limits . 15
4.3.5.4 Conformance . 16
4.3.6 Unwanted emissions in the spurious domain . 16
4.3.6.1 Applicability. 16
4.3.6.2 Description . 16
4.3.6.3 Limits . 16
4.3.6.4 Conformance . 17
4.4 Receiver Conformance Requirements . 17
4.4.1 General . 17
4.4.2 Receiver spurious emissions . 17
4.4.2.1 Applicability. 17
4.4.2.2 Description . 17
4.4.2.3 Limits . 17
4.4.2.4 Conformance . 18
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 305 550 V2.1.0 (2017-10)
4.4.3 Receiver interference signal handling . 18
4.4.3.1 Applicability. 18
4.4.3.2 Description . 18
4.4.3.3 Limits . 18
4.4.3.4 Conformance . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 General conditions for testing . 19
5.2.1 Product information . 19
5.2.2 Requirements for the test modulation . 20
5.2.2.1 Normal test signals and test modulation. 20
5.2.2.2 Normal test signals for data . 20
5.2.2.3 Testing of frequency agile or hopping equipment . 20
5.2.3 Test conditions, power supply and ambient temperatures . 20
5.2.4 Choice of equipment for test suites . 20
5.2.5 Multiple Operating bandwidths and multiband equipment . 21
5.2.6 Testing of host connected equipment and plug-in radio devices . 21
5.2.6.1 General . 21
5.2.6.2 The use of a host or test fixture for testing plug-In radio devices . 21
5.3 Mechanical and electrical design . 21
5.3.1 General . 21
5.3.2 Controls . 21
5.3.3 Transmitter shut-off facility . 21
5.3.4 Receiver automatic switch-off . 21
5.4 Auxiliary test equipment . 22
5.5 Reference bandwidth of the measuring receiver . 22
5.6 General requirements for RF cables . 23
5.7 RF waveguides . 23
5.8 External harmonic mixers . 24
5.8.1 Introduction. 24
5.8.2 Signal identification . 25
5.8.3 Measurement hints . 25
5.9 Interpretation of the measurement results . 26
5.9.0 General . 26
5.9.1 For measurement above 110 GHz . 26
5.9.2 Conversion loss data and measurement uncertainty . 27
5.9.3 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 27
5.9.4 Measurement uncertainty is greater than maximum acceptable uncertainty . 27
6 Conformance test suits . 28
6.1 Introduction . 28
6.2 Initial Measurement steps . 28
6.3 Radiated measurements . 28
6.3.1 General . 28
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 28
6.3.3 Guidance on the use of a radiation test site . 28
6.3.3.1 General . 28
6.3.3.2 Minimum requirements for test sites for measurements above 18 GHz . 28
6.3.3.3 Range length. . 29
6.3.4 Standard test and calibration methods . 30
6.4 Test fixture . 30
6.4.1 Requirements . 30
6.4.2 Calibration . 30
6.5 Conformance methods of measurement for transmitter . 31
6.5.1 General . 31
6.5.2 Operating frequency range(s) (OFR) . 31
6.5.3 Mean Power . 31
6.5.4 Mean power spectral density measurements . 31
6.5.5 Transmitter unwanted emissions . 32
6.6 Conformance methods of measurement for receiver . 32
6.6.1 Receiver spurious emissions . 32
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 305 550 V2.1.0 (2017-10)
6.6.2 Receiver interference signal handling . 32
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 33
Annex B (informative): Measurement antenna, preamplifier, and cable specifications . 34
Annex C (informative): Atmospheric absorptions and material dependent attenuations . 35
C.0 General . 35
C.1 Atmospheric absorptions . 35
C.2 Material dependent attenuations . 37
Annex D (informative): Bibliography . 39
Annex E (informative): Change history . 40
History . 41
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 305 550 V2.1.0 (2017-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.10] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.9].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is covering Short Range Devices (SRD) Radio equipment to be used in the 40 GHz to 246 GHz
frequency range.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 305 550 V2.1.0 (2017-10)
1 Scope
The present document specifies technical characteristics and methods of measurements for Non-specific Short Range
Devices category equipment types.
Non specific SRDs category is defined by the EU Commission Decision 2013/752/EU [i.2] as:
• "The non-specific short-range device category covers all kinds of radio devices, regardless of the application
or the purpose, which fulfil the technical conditions as specified for a given frequency band. Typical uses
include telemetry, telecommand, alarms, data transmissions in general and other applications".
The present document covers equipment:
• capable of operating in frequency bands listed in table 1;
• intended for fixed, mobile or nomadic use;
• either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
• with all types of modulation.
Table 1: Short Range Devices within the 40 GHz to 246 GHz frequency range
Frequency Bands Applications
(Transmit and Receive)
57 GHz to 64 GHz Non-specific SRD
61,0 GHz to 61,5 GHz Non-specific SRD
122 GHz to 123 GHz Non-specific SRD
244 GHz to 246 GHz Non-specific SRD
NOTE 1: The frequency usage conditions for Non-specific SRDs are EU wide harmonised bands according to EC
Decision 2013/752/EU [i.2] as known at the date of publication of the present document. In addition, it
should be noted that other frequency bands may be available for short range devices in a country within
the frequency range 40 GHz to 246 GHz covered by the present document. See the CEPT/ERC
Recommendation 70-03 [i.1] or as implemented through National Radio Interfaces (NRI) and additional
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.9] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] CISPR 16-1-1:2015: "Specification for radio disturbance and immunity measuring apparatus and
methods; Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus".
[2] Recommendation ITU-T O.153 (1992): "Basic parameters for the measurement of error
performance at bit rates below the primary rate".
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 305 550 V2.1.0 (2017-10)
[3] ETSI TS 103 052 (V1.1.1) (03-2011): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Radiated measurement methods and general arrangements for test sites up to 100 GHz".
[4] ETSI EN 303 396 (V1.1.1) (12-2016): "Short Range Devices; Measurement Techniques for
Automotive and Surveillance Radar Equipment".
[5] ETSI TS 103 361 (V1.1.1) (03-2016): "Short Range Devices (SRD) using Ultra Wide Band
technology (UWB); Receiver technical requirements, parameters and measurement procedures to
fulfil the requirements of the Directive 2014/53/EU".
[6] Recommendation ITU T O.41 (1994): "Psophometer for use on telephone-type circuits".
[7] CISPR 16-1-4:2010: "Specification for radio disturbance and immunity measuring apparatus and
methods; Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites
for radiated disturbance measurements".
[8] CISPR 16-1-5:2014: "Specification for radio disturbance and immunity measuring apparatus and
methods; Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration
sites and reference test sites for 5 MHz to 18 GHz".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version
...
SLOVENSKI STANDARD
oSIST prEN 305 550 V2.1.0:2017
01-december-2017
1DSUDYHNUDWNHJDGRVHJD 65' 5DGLMVNDRSUHPDNLVHXSRUDEOMDYIUHNYHQþQHP
REPRþMXRG*+]GR*+]+DUPRQL]LUDQLVWDQGDUG]DGRVWRSGRUDGLMVNHJD
VSHNWUD
Short Range Devices (SRD) - Radio equipment to be used in the 40 GHz to 246 GHz
frequency range - Harmonised Standard for access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 305 550 V2.1.0 (2017-10)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN 305 550 V2.1.0:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 305 550 V2.1.0:2017
---------------------- Page: 2 ----------------------
oSIST prEN 305 550 V2.1.0:2017
Draft ETSI EN 305 550 V2.1.0 (2017-10)
HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD);
Radio equipment to be used
in the 40 GHz to 246 GHz frequency range;
Harmonised Standard for access to radio spectrum
---------------------- Page: 3 ----------------------
oSIST prEN 305 550 V2.1.0:2017
2 Draft ETSI EN 305 550 V2.1.0 (2017-10)
Reference
REN/ERM-TG28-509
Keywords
harmonised standard, radio, SRD, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2017.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 305 550 V2.1.0:2017
3 Draft ETSI EN 305 550 V2.1.0 (2017-10)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 11
4.1 Environmental conditions . 11
4.2 General . 11
4.2.1 Background information . 11
4.2.2 Wanted performance criteria. 11
4.3 Transmitter Conformance Requirements . 12
4.3.1 Permitted range of operating frequencies . 12
4.3.1.1 Applicability. 12
4.3.1.2 Description . 12
4.3.1.3 Limits . 12
4.3.1.4 Conformance . 12
4.3.2 Operating frequency range(s) (OFR) . 12
4.3.2.1 Applicability. 12
4.3.2.2 Description . 12
4.3.2.3 Limits . 13
4.3.2.4 Conformance . 13
4.3.3 Mean Power . 13
4.3.3.1 Applicability. 13
4.3.3.2 Description . 14
4.3.3.3 Limits . 14
4.3.3.4 Conformance . 14
4.3.4 Mean Power spectral density . 14
4.3.4.1 Applicability. 14
4.3.4.2 Description . 14
4.3.4.3 Limits . 14
4.3.4.4 Conformance . 15
4.3.5 Unwanted emissions in the out-of-band domain . 15
4.3.5.1 Applicability. 15
4.3.5.2 Description . 15
4.3.5.3 Limits . 15
4.3.5.4 Conformance . 16
4.3.6 Unwanted emissions in the spurious domain . 16
4.3.6.1 Applicability. 16
4.3.6.2 Description . 16
4.3.6.3 Limits . 16
4.3.6.4 Conformance . 17
4.4 Receiver Conformance Requirements . 17
4.4.1 General . 17
4.4.2 Receiver spurious emissions . 17
4.4.2.1 Applicability. 17
4.4.2.2 Description . 17
4.4.2.3 Limits . 17
4.4.2.4 Conformance . 18
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 305 550 V2.1.0:2017
4 Draft ETSI EN 305 550 V2.1.0 (2017-10)
4.4.3 Receiver interference signal handling . 18
4.4.3.1 Applicability. 18
4.4.3.2 Description . 18
4.4.3.3 Limits . 18
4.4.3.4 Conformance . 19
5 Testing for compliance with technical requirements . 19
5.1 Environmental conditions for testing . 19
5.2 General conditions for testing . 19
5.2.1 Product information . 19
5.2.2 Requirements for the test modulation . 20
5.2.2.1 Normal test signals and test modulation. 20
5.2.2.2 Normal test signals for data . 20
5.2.2.3 Testing of frequency agile or hopping equipment . 20
5.2.3 Test conditions, power supply and ambient temperatures . 20
5.2.4 Choice of equipment for test suites . 20
5.2.5 Multiple Operating bandwidths and multiband equipment . 21
5.2.6 Testing of host connected equipment and plug-in radio devices . 21
5.2.6.1 General . 21
5.2.6.2 The use of a host or test fixture for testing plug-In radio devices . 21
5.3 Mechanical and electrical design . 21
5.3.1 General . 21
5.3.2 Controls . 21
5.3.3 Transmitter shut-off facility . 21
5.3.4 Receiver automatic switch-off . 21
5.4 Auxiliary test equipment . 22
5.5 Reference bandwidth of the measuring receiver . 22
5.6 General requirements for RF cables . 23
5.7 RF waveguides . 23
5.8 External harmonic mixers . 24
5.8.1 Introduction. 24
5.8.2 Signal identification . 25
5.8.3 Measurement hints . 25
5.9 Interpretation of the measurement results . 26
5.9.0 General . 26
5.9.1 For measurement above 110 GHz . 26
5.9.2 Conversion loss data and measurement uncertainty . 27
5.9.3 Measurement uncertainty is equal to or less than maximum acceptable uncertainty . 27
5.9.4 Measurement uncertainty is greater than maximum acceptable uncertainty . 27
6 Conformance test suits . 28
6.1 Introduction . 28
6.2 Initial Measurement steps . 28
6.3 Radiated measurements . 28
6.3.1 General . 28
6.3.2 Test sites and general arrangements for measurements involving the use of radiated fields . 28
6.3.3 Guidance on the use of a radiation test site . 28
6.3.3.1 General . 28
6.3.3.2 Minimum requirements for test sites for measurements above 18 GHz . 28
6.3.3.3 Range length. . 29
6.3.4 Standard test and calibration methods . 30
6.4 Test fixture . 30
6.4.1 Requirements . 30
6.4.2 Calibration . 30
6.5 Conformance methods of measurement for transmitter . 31
6.5.1 General . 31
6.5.2 Operating frequency range(s) (OFR) . 31
6.5.3 Mean Power . 31
6.5.4 Mean power spectral density measurements . 31
6.5.5 Transmitter unwanted emissions . 32
6.6 Conformance methods of measurement for receiver . 32
6.6.1 Receiver spurious emissions . 32
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 305 550 V2.1.0:2017
5 Draft ETSI EN 305 550 V2.1.0 (2017-10)
6.6.2 Receiver interference signal handling . 32
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 33
Annex B (informative): Measurement antenna, preamplifier, and cable specifications . 34
Annex C (informative): Atmospheric absorptions and material dependent attenuations . 35
C.0 General . 35
C.1 Atmospheric absorptions . 35
C.2 Material dependent attenuations . 37
Annex D (informative): Bibliography . 39
Annex E (informative): Change history . 40
History . 41
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 305 550 V2.1.0:2017
6 Draft ETSI EN 305 550 V2.1.0 (2017-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.10] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.9].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is covering Short Range Devices (SRD) Radio equipment to be used in the 40 GHz to 246 GHz
frequency range.
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 305 550 V2.1.0:2017
7 Draft ETSI EN 305 550 V2.1.0 (2017-10)
1 Scope
The present document specifies technical characteristics and methods of measurements for Non-specific Short Range
Devices category equipment types.
Non specific SRDs category is defined by the EU Commission Decision 2013/752/EU [i.2] as:
• "The non-specific short-range device category covers all kinds of radio devices, regardless of the application
or the purpose, which fulfil the technical conditions as specified for a given frequency band. Typical uses
include telemetry, telecommand, alarms, data transmissions in general and other applications".
The present document covers equipment:
• capable of operating in frequency bands listed in table 1;
• intended for fixed, mobile or nomadic use;
• either with a Radio Frequency (RF) output connection and dedicated antenna or with an integral antenna;
• with all types of modulation.
Table 1: Short Range Devices within the 40 GHz to 246 GHz frequency range
Frequency Bands Applications
(Transmit and Receive)
57 GHz to 64 GHz Non-specific SRD
61,0 GHz to 61,5 GHz Non-specific SRD
122 GHz to 123 GHz Non-specific SRD
244 GHz to 246 GHz Non-specific SRD
NOTE 1: The frequency usage conditions for Non-specific SRDs are EU wide harmonised bands according to EC
Decision 2013/752/EU [i.2] as known at the date of publication of the present document. In addition, it
should be noted that other frequency bands may be available for short range devices in a country within
the frequency range 40 GHz to 246 GHz covered by the present document. See the CEPT/ERC
Recommendation 70-03 [i.1] or as implemented through National Radio Interfaces (NRI) and additional
NOTE 2: The relationship between the present document and essential requirements of article 3.2 of Directive
2014/53/EU [i.9] is given in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] CISPR 16-1-1:2015: "Specification for radio disturbance and immunity measuring apparatus and
methods; Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus".
[2] Recommendation ITU-T O.153 (1992): "Basic parameters for the measurement of error
performance at bit rates below the primary rate".
ETSI
---------------------- Page: 9 ----------------------
oSIST prEN 305 550 V2.1.0:2017
8 Draft ETSI EN 305 550 V2.1.0 (2017-10)
[3] ETSI TS 103 052 (V1.1.1) (03-2011): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Radiated measurement methods and general arrangements for test sites up to 100 GHz".
[4] ETSI EN 303 396 (V1.1.1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.