Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI)

REN/TCCE-03246

Prizemni snopovni radio (TETRA) - Govor in podatki (V+D) in neposredni način zveze (DMO) - 5. del: Vmesnik periferne opreme (PEI)

Ta dokument določa funkcionalne in tehnične vidike vmesnika periferne opreme (PEI) prizemnega snopovnega radia, ki je vmesnik med terminalsko opremo tipa 2 (TE2) in mobilno zaključitvijo tipa 2 (MT2) v referenčni točki RT.

General Information

Status
Published
Publication Date
23-Oct-2016
Current Stage
12 - Completion
Due Date
04-Nov-2016
Completion Date
24-Oct-2016

Buy Standard

Standard
EN 300 392-5 V2.5.1:2016
English language
319 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 300 392-5 V2.5.1 (2016-10) - Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI)
English language
319 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 300 392-5 V2.5.0 (2016-07) - Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI)
English language
319 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) and Direct Mode Operation (DMO) - Part 5: Peripheral Equipment Interface (PEI)33.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:ETSI EN 300 392-5 V2.5.1 (2016-10)SIST EN 300 392-5 V2.5.1:2016en01-december-2016SIST EN 300 392-5 V2.5.1:2016SLOVENSKI
STANDARD



SIST EN 300 392-5 V2.5.1:2016



ETSI EN 300 392-5 V2.5.1 (2016-10) Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI)
EUROPEAN STANDARD SIST EN 300 392-5 V2.5.1:2016



ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 2
Reference REN/TCCE-03246 Keywords data, interface, TETRA, V+D, voice ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 392-5 V2.5.1:2016



ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 3 Contents Intellectual Property Rights . 22 Foreword . 22 Modal verbs terminology . 23 1 Scope . 24 2 References . 24 2.1 Normative references . 24 2.2 Informative references . 26 3 Symbols and abbreviations . 26 3.1 Symbols . 26 3.2 Abbreviations . 27 4 Overview of TETRA PEI . 30 4.1 Introduction . 30 4.2 Protocol architecture. 31 4.3 Context model . 32 4.4 Void . 35 4.5 SDS Message stacks . 35 4.5.0 General on SDS Message stacks . 35 4.5.1 Status message texts. 35 4.5.2 SDS 1 message texts . 35 4.5.3 Status and SDS types 1, 2 and 3 . 35 4.5.4 SDS type 4 . 36 4.6 Phone books . 36 4.7 Reserved status values considerations . 36 4.8 SDS-TL considerations . 36 4.9 AT commands . 37 4.9.1 General on AT commands . 37 4.9.2 AT command state . 39 4.9.3 AT circuit mode data state . 39 4.9.4 TNP1 and packet data state . 40 4.9.5 Transitions between states . 40 4.9.5.1 Transition from AT command state to AT circuit mode data state . 40 4.9.5.2 Transition from AT circuit mode data state to AT command state . 40 4.9.5.3 Transition from AT command state to TNP1 or packet data state . 41 4.9.5.4 Transition from TNP1 and packet data state to AT command state . 41 4.10 TNP1 and IP network layer . 41 4.10.1 General operation . 41 4.10.2 IP addressing . 41 4.10.3 Local mode . 42 4.10.4 Wide mode . 42 4.11 TNP1 operation . 42 4.12 Link start up at the MT . 43 5 Physical layer . 43 5.1 General on physical layer . 43 5.2 Physical layer for V.24/V.28 . 44 5.2.1 Electrical characteristics for V.24/V.28 . 44 5.2.2 Physical connection . 44 5.2.3 Character format . 45 5.2.4 Data transmission rate for V.24/V.28 . 45 5.3 Wire-line high rate connectivity technologies . 45 5.3.1 General . 45 5.3.2 Universal Serial Bus . 46 5.3.3 USB On-The-Go . 47 5.4 Wireless high rate connectivity . 47 5.4.1 General . 47 SIST EN 300 392-5 V2.5.1:2016



ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 4 5.4.2 Wireless Security . 47 5.4.3 Certified Wireless USB . 48 5.4.4 Bluetooth . 48 6 AT command set . 48 6.1 General on AT command set . 48 6.2 Limitations . 49 6.3 SDS user data . 49 6.4 AT command syntax . 50 6.4.1 General on AT command syntax . 50 6.4.2 Command line . 50 6.4.2.0 Command line structure . 50 6.4.2.1 Prefix . 50 6.4.2.2 Body . 50 6.4.2.3 Termination Character . 50 6.4.2.4 Concatenating extended commands . 50 6.4.2.5 Multiline extended commands . 50 6.4.3 Command types . 51 6.4.4 Parameters. 52 6.4.5 AT command examples . 52 6.4.6 Information responses and result codes . 53 6.4.6.1 General on information responses and result codes . 53 6.4.6.2 Information Responses . 53 6.4.6.3 Result Code . 53 6.4.6.4 AT result examples in verbose mode . 54 6.4.6.5 AT result examples in numeric mode. 56 6.4.6.6 Aborting information results and result codes. 57 6.4.6.7 Unsolicited nested responses . 57 6.4.7 Handling of unknown parameters . 59 6.5 Existing V.250 commands for call control . 60 6.5.1 Commands . 60 6.5.2 Result Codes . 60 6.5.3 Dialled string and user identity . 60 6.6 Existing V.250 commands for PEI control . 61 6.6a Modified V.250 commands for PEI control . 61 6.6a.1 General on modified V.250 commands for PEI control. 61 6.6a.2 Line termination character: S3 . 62 6.6a.2.1 General on S3 . 62 6.6a.2.2 Description . 62 6.6a.2.3 S3 set syntax. 62 6.6a.2.4 S3 read syntax . 62 6.6a.2.5 S3 read result code text . 62 6.6a.2.6 S3 test syntax . 62 6.6a.2.7 S3 test result syntax . 62 6.6a.3 Response formatting character: S4 . 63 6.6a.3.1 General on S4 . 63 6.6a.3.2 Description . 63 6.6a.3.3 S4 set syntax. 63 6.6a.3.4 S4 read syntax . 63 6.6a.3.5 S4 read result code text . 63 6.6a.3.6 S4 test syntax . 63 6.6a.3.7 S4 test result syntax . 63 6.6a.4 Line editing character: S5 . 63 6.6a.4.1 General on S5 . 63 6.6a.4.2 Description . 64 6.6a.4.3 S5 set syntax. 64 6.6a.4.4 S5 read syntax . 64 6.6a.4.5 S5 read result code text . 64 6.6a.4.6 S5 test syntax . 64 6.6a.4.7 S5 test result syntax . 64 6.6a.5 Echo: E . 64 6.6a.5.1 General on E. 64 SIST EN 300 392-5 V2.5.1:2016



ETSI ETSI EN 300 392-5 V2.5.1 (2016-10) 5 6.6a.5.2 Description . 64 6.6a.5.3 E set syntax . 64 6.6a.5.4 E read syntax . 65 6.6a.5.5 E read result code text . 65 6.6a.5.6 E test syntax . 65 6.6a.5.7 E test result syntax . 65 6.6a.6 Result code suppression: Q . 65 6.6a.6.1 General on Q . 65 6.6a.6.2 Description . 65 6.6a.6.3 Q set syntax . 65 6.6a.6.4 Q read syntax . 65 6.6a.6.5 Q read result code text . 65 6.6a.6.6 Q test syntax . 66 6.6a.6.7 Q test result syntax . 66 6.6a.7 MT response format: V . 66 6.6a.7.1 General on V . 66 6.6a.7.2 Description . 66 6.6a.7.3 V set syntax . 66 6.6a.7.4 V read syntax . 66 6.6a.7.5 V read result code text . 66 6.6a.7.6 V test syntax . 66 6.6a.7.7 V test result syntax . 66 6.6a.8 Circuit 109 (DCD) behavior: &C . 67 6.6a.8.1 General on &C . 67 6.6a.8.2 Description . 67 6.6a.8.3 &C set syntax . 67 6.6a.8.4 &C read syntax . 67 6.6a.8.5 &C read result code text . 67 6.6a.8.6 &C test syntax . 67 6.6a.8.7 &C test result syntax . 67 6.6a.9 Circuit 108/2 (DTR) behavior: &D . 67 6.6a.9.1 General on &D . 67 6.6a.9.2 Description . 68 6.6a.9.3 &D set syntax . 68 6.6a.9.4 &D read syntax . 68 6.6a.9.5 &D read result code text . 68 6.6a.9.6 &D test syntax . 68 6.6a.9.7 &D test result syntax . 68 6.6a.10 PEI data rate: +IPR . 68 6.6a.10.1 General on +IPR . 68 6.6a.10.2 Description . 68 6.6a.10.3 +IPR set syntax . 68 6.6a.10.4 +IPR read syntax . 69 6.6a.10.5 +IPR read result code text . 69 6.6a.10.6 +IPR test syntax . 69 6.6a.10.7 +IPR test result syntax . 69 6.7 Existing V.250 commands for generic MT control . 69 6.7a Modified V.250 commands for generic MT control . 69 6.7a.1 General on modified V.250 commands for generic MT control . 69 6.7a.2 Full factory defaults Z. 70 6.7a.2.1 General on full factory defaults Z . 70 6.7a.2.2 Description . 70 6.7a.2.3 Z execution syntax . 70 6.7a.2.4 Z test syntax .
...

ETSI EN 300 392-5 V2.5.1 (2016-10)






EUROPEAN STANDARD
Terrestrial Trunked Radio (TETRA);
Voice plus Data (V+D) and Direct Mode Operation (DMO);
Part 5: Peripheral Equipment Interface (PEI)

---------------------- Page: 1 ----------------------
2 ETSI EN 300 392-5 V2.5.1 (2016-10)



Reference
REN/TCCE-03246
Keywords
data, interface, TETRA, V+D, voice
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI EN 300 392-5 V2.5.1 (2016-10)
Contents
Intellectual Property Rights . 22
Foreword . 22
Modal verbs terminology . 23
1 Scope . 24
2 References . 24
2.1 Normative references . 24
2.2 Informative references . 26
3 Symbols and abbreviations . 26
3.1 Symbols . 26
3.2 Abbreviations . 27
4 Overview of TETRA PEI . 30
4.1 Introduction . 30
4.2 Protocol architecture. 31
4.3 Context model . 32
4.4 Void . 35
4.5 SDS Message stacks . 35
4.5.0 General on SDS Message stacks . 35
4.5.1 Status message texts. 35
4.5.2 SDS 1 message texts . 35
4.5.3 Status and SDS types 1, 2 and 3 . 35
4.5.4 SDS type 4 . 36
4.6 Phone books . 36
4.7 Reserved status values considerations . 36
4.8 SDS-TL considerations . 36
4.9 AT commands . 37
4.9.1 General on AT commands . 37
4.9.2 AT command state . 39
4.9.3 AT circuit mode data state . 39
4.9.4 TNP1 and packet data state . 40
4.9.5 Transitions between states . 40
4.9.5.1 Transition from AT command state to AT circuit mode data state . 40
4.9.5.2 Transition from AT circuit mode data state to AT command state . 40
4.9.5.3 Transition from AT command state to TNP1 or packet data state . 41
4.9.5.4 Transition from TNP1 and packet data state to AT command state . 41
4.10 TNP1 and IP network layer . 41
4.10.1 General operation . 41
4.10.2 IP addressing . 41
4.10.3 Local mode . 42
4.10.4 Wide mode . 42
4.11 TNP1 operation . 42
4.12 Link start up at the MT . 43
5 Physical layer . 43
5.1 General on physical layer . 43
5.2 Physical layer for V.24/V.28 . 44
5.2.1 Electrical characteristics for V.24/V.28 . 44
5.2.2 Physical connection . 44
5.2.3 Character format . 45
5.2.4 Data transmission rate for V.24/V.28 . 45
5.3 Wire-line high rate connectivity technologies . 45
5.3.1 General . 45
5.3.2 Universal Serial Bus . 46
5.3.3 USB On-The-Go . 47
5.4 Wireless high rate connectivity . 47
5.4.1 General . 47
ETSI

---------------------- Page: 3 ----------------------
4 ETSI EN 300 392-5 V2.5.1 (2016-10)
5.4.2 Wireless Security . 47
5.4.3 Certified Wireless USB . 48
5.4.4 Bluetooth . 48
6 AT command set . 48
6.1 General on AT command set . 48
6.2 Limitations . 49
6.3 SDS user data . 49
6.4 AT command syntax . 50
6.4.1 General on AT command syntax . 50
6.4.2 Command line . 50
6.4.2.0 Command line structure . 50
6.4.2.1 Prefix . 50
6.4.2.2 Body . 50
6.4.2.3 Termination Character . 50
6.4.2.4 Concatenating extended commands . 50
6.4.2.5 Multiline extended commands . 50
6.4.3 Command types . 51
6.4.4 Parameters. 52
6.4.5 AT command examples . 52
6.4.6 Information responses and result codes . 53
6.4.6.1 General on information responses and result codes . 53
6.4.6.2 Information Responses . 53
6.4.6.3 Result Code . 53
6.4.6.4 AT result examples in verbose mode . 54
6.4.6.5 AT result examples in numeric mode. 56
6.4.6.6 Aborting information results and result codes. 57
6.4.6.7 Unsolicited nested responses . 57
6.4.7 Handling of unknown parameters . 59
6.5 Existing V.250 commands for call control . 60
6.5.1 Commands . 60
6.5.2 Result Codes . 60
6.5.3 Dialled string and user identity . 60
6.6 Existing V.250 commands for PEI control . 61
6.6a Modified V.250 commands for PEI control . 61
6.6a.1 General on modified V.250 commands for PEI control. 61
6.6a.2 Line termination character: S3 . 62
6.6a.2.1 General on S3 . 62
6.6a.2.2 Description . 62
6.6a.2.3 S3 set syntax. 62
6.6a.2.4 S3 read syntax . 62
6.6a.2.5 S3 read result code text . 62
6.6a.2.6 S3 test syntax . 62
6.6a.2.7 S3 test result syntax . 62
6.6a.3 Response formatting character: S4 . 63
6.6a.3.1 General on S4 . 63
6.6a.3.2 Description . 63
6.6a.3.3 S4 set syntax. 63
6.6a.3.4 S4 read syntax . 63
6.6a.3.5 S4 read result code text . 63
6.6a.3.6 S4 test syntax . 63
6.6a.3.7 S4 test result syntax . 63
6.6a.4 Line editing character: S5 . 63
6.6a.4.1 General on S5 . 63
6.6a.4.2 Description . 64
6.6a.4.3 S5 set syntax. 64
6.6a.4.4 S5 read syntax . 64
6.6a.4.5 S5 read result code text . 64
6.6a.4.6 S5 test syntax . 64
6.6a.4.7 S5 test result syntax . 64
6.6a.5 Echo: E . 64
6.6a.5.1 General on E. 64
ETSI

---------------------- Page: 4 ----------------------
5 ETSI EN 300 392-5 V2.5.1 (2016-10)
6.6a.5.2 Description . 64
6.6a.5.3 E set syntax . 64
6.6a.5.4 E read syntax . 65
6.6a.5.5 E read result code text . 65
6.6a.5.6 E test syntax . 65
6.6a.5.7 E test result syntax . 65
6.6a.6 Result code suppression: Q . 65
6.6a.6.1 General on Q . 65
6.6a.6.2 Description . 65
6.6a.6.3 Q set syntax . 65
6.6a.6.4 Q read syntax . 65
6.6a.6.5 Q read result code text . 65
6.6a.6.6 Q test syntax . 66
6.6a.6.7 Q test result syntax . 66
6.6a.7 MT response format: V . 66
6.6a.7.1 General on V . 66
6.6a.7.2 Description . 66
6.6a.7.3 V set syntax . 66
6.6a.7.4 V read syntax . 66
6.6a.7.5 V read result code text . 66
6.6a.7.6 V test syntax . 66
6.6a.7.7 V test result syntax . 66
6.6a.8 Circuit 109 (DCD) behavior: &C . 67
6.6a.8.1 General on &C . 67
6.6a.8.2 Description . 67
6.6a.8.3 &C set syntax . 67
6.6a.8.4 &C read syntax . 67
6.6a.8.5 &C read result code text . 67
6.6a.8.6 &C test syntax . 67
6.6a.8.7 &C test result syntax . 67
6.6a.9 Circuit 108/2 (DTR) behavior: &D . 67
6.6a.9.1 General on &D . 67
6.6a.9.2 Description . 68
6.6a.9.3 &D set syntax . 68
6.6a.9.4 &D read syntax . 68
6.6a.9.5 &D read result code text . 68
6.6a.9.6 &D test syntax . 68
6.6a.9.7 &D test result syntax . 68
6.6a.10 PEI data rate: +IPR . 68
6.6a.10.1 General on +IPR . 68
6.6a.10.2 Description . 68
6.6a.10.3 +IPR set syntax . 68
6.6a.10.4 +IPR read syntax . 69
6.6a.10.5 +IPR read result code text . 69
6.6a.10.6 +IPR test syntax . 69
6.6a.10.7 +IPR test result syntax . 69
6.7 Existing V.250 commands for generic MT control . 69
6.7a Modified V.250 commands for generic MT control . 69
6.7a.1 General on modified V.250 commands for generic MT control . 69
6.7a.2 Full factory defaults Z. 70
6.7a.2.1 General on full factory defaults Z . 70
6.7a.2.2 Description . 70
6.7a.2.3 Z execution syntax . 70
6.7a.2.4 Z test syntax . 70
6.7a.3 Factory defaults &F .
...

Draft ETSI EN 300 392-5 V2.5.0 (2016-07)






EUROPEAN STANDARD
Terrestrial Trunked Radio (TETRA);
Voice plus Data (V+D) and Direct Mode Operation (DMO);
Part 5: Peripheral Equipment Interface (PEI)

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 300 392-5 V2.5.0 (2016-07)



Reference
REN/TCCE-03246
Keywords
data, interface, TETRA, V+D, voice
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 300 392-5 V2.5.0 (2016-07)
Contents
Intellectual Property Rights . 22
Foreword . 22
Modal verbs terminology . 23
1 Scope . 24
2 References . 24
2.1 Normative references . 24
2.2 Informative references . 26
3 Symbols and abbreviations . 26
3.1 Symbols . 26
3.2 Abbreviations . 27
4 Overview of TETRA PEI . 30
4.1 Introduction . 30
4.2 Protocol architecture. 31
4.3 Context model . 32
4.4 Void . 35
4.5 SDS Message stacks . 35
4.5.0 General on SDS Message stacks . 35
4.5.1 Status message texts. 35
4.5.2 SDS 1 message texts . 35
4.5.3 Status and SDS types 1, 2 and 3 . 35
4.5.4 SDS type 4 . 36
4.6 Phone books . 36
4.7 Reserved status values considerations . 36
4.8 SDS-TL considerations . 36
4.9 AT commands . 37
4.9.1 General on AT commands . 37
4.9.2 AT command state . 39
4.9.3 AT circuit mode data state . 39
4.9.4 TNP1 and packet data state . 40
4.9.5 Transitions between states . 40
4.9.5.1 Transition from AT command state to AT circuit mode data state . 40
4.9.5.2 Transition from AT circuit mode data state to AT command state . 40
4.9.5.3 Transition from AT command state to TNP1 or packet data state . 41
4.9.5.4 Transition from TNP1 and packet data state to AT command state . 41
4.10 TNP1 and IP network layer . 41
4.10.1 General operation . 41
4.10.2 IP addressing . 41
4.10.3 Local mode . 42
4.10.4 Wide mode . 42
4.11 TNP1 operation . 42
4.12 Link start up at the MT . 43
5 Physical layer . 43
5.1 General on physical layer . 43
5.2 Physical layer for V.24/V.28 . 44
5.2.1 Electrical characteristics for V.24/V.28 . 44
5.2.2 Physical connection . 44
5.2.3 Character format . 45
5.2.4 Data transmission rate for V.24/V.28 . 45
5.3 Wire-line high rate connectivity technologies . 45
5.3.1 General . 45
5.3.2 Universal Serial Bus . 46
5.3.3 USB On-The-Go . 47
5.4 Wireless high rate connectivity . 47
5.4.1 General . 47
ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 300 392-5 V2.5.0 (2016-07)
5.4.2 Wireless Security . 47
5.4.3 Certified Wireless USB . 48
5.4.4 Bluetooth . 48
6 AT command set . 48
6.1 General on AT command set . 48
6.2 Limitations . 49
6.3 SDS user data . 49
6.4 AT command syntax . 50
6.4.1 General on AT command syntax . 50
6.4.2 Command line . 50
6.4.2.0 Command line structure . 50
6.4.2.1 Prefix . 50
6.4.2.2 Body . 50
6.4.2.3 Termination Character . 50
6.4.2.4 Concatenating extended commands . 50
6.4.2.5 Multiline extended commands . 50
6.4.3 Command types . 51
6.4.4 Parameters. 52
6.4.5 AT command examples . 52
6.4.6 Information responses and result codes . 53
6.4.6.1 General on information responses and result codes . 53
6.4.6.2 Information Responses . 53
6.4.6.3 Result Code . 53
6.4.6.4 AT result examples in verbose mode . 54
6.4.6.5 AT result examples in numeric mode. 56
6.4.6.6 Aborting information results and result codes. 57
6.4.6.7 Unsolicited nested responses . 57
6.4.7 Handling of unknown parameters . 59
6.5 Existing V.250 commands for call control . 60
6.5.1 Commands . 60
6.5.2 Result Codes . 60
6.5.3 Dialled string and user identity . 60
6.6 Existing V.250 commands for PEI control . 61
6.6a Modified V.250 commands for PEI control . 61
6.6a.1 General on modified V.250 commands for PEI control. 61
6.6a.2 Line termination character: S3 . 62
6.6a.2.1 General on S3 . 62
6.6a.2.2 Description . 62
6.6a.2.3 S3 set syntax. 62
6.6a.2.4 S3 read syntax . 62
6.6a.2.5 S3 read result code text . 62
6.6a.2.6 S3 test syntax . 62
6.6a.2.7 S3 test result syntax . 62
6.6a.3 Response formatting character: S4 . 63
6.6a.3.1 General on S4 . 63
6.6a.3.2 Description . 63
6.6a.3.3 S4 set syntax. 63
6.6a.3.4 S4 read syntax . 63
6.6a.3.5 S4 read result code text . 63
6.6a.3.6 S4 test syntax . 63
6.6a.3.7 S4 test result syntax . 63
6.6a.4 Line editing character: S5 . 63
6.6a.4.1 General on S5 . 63
6.6a.4.2 Description . 64
6.6a.4.3 S5 set syntax. 64
6.6a.4.4 S5 read syntax . 64
6.6a.4.5 S5 read result code text . 64
6.6a.4.6 S5 test syntax . 64
6.6a.4.7 S5 test result syntax . 64
6.6a.5 Echo: E . 64
6.6a.5.1 General on E. 64
ETSI

---------------------- Page: 4 ----------------------
5 Draft ETSI EN 300 392-5 V2.5.0 (2016-07)
6.6a.5.2 Description . 64
6.6a.5.3 E set syntax . 64
6.6a.5.4 E read syntax . 65
6.6a.5.5 E read result code text . 65
6.6a.5.6 E test syntax . 65
6.6a.5.7 E test result syntax . 65
6.6a.6 Result code suppression: Q . 65
6.6a.6.1 General on Q . 65
6.6a.6.2 Description . 65
6.6a.6.3 Q set syntax . 65
6.6a.6.4 Q read syntax . 65
6.6a.6.5 Q read result code text . 65
6.6a.6.6 Q test syntax . 66
6.6a.6.7 Q test result syntax . 66
6.6a.7 MT response format: V . 66
6.6a.7.1 General on V . 66
6.6a.7.2 Description . 66
6.6a.7.3 V set syntax . 66
6.6a.7.4 V read syntax . 66
6.6a.7.5 V read result code text . 66
6.6a.7.6 V test syntax . 66
6.6a.7.7 V test result syntax . 66
6.6a.8 Circuit 109 (DCD) behavior: &C . 67
6.6a.8.1 General on &C . 67
6.6a.8.2 Description . 67
6.6a.8.3 &C set syntax . 67
6.6a.8.4 &C read syntax . 67
6.6a.8.5 &C read result code text . 67
6.6a.8.6 &C test syntax . 67
6.6a.8.7 &C test result syntax . 67
6.6a.9 Circuit 108/2 (DTR) behavior: &D . 67
6.6a.9.1 General on &D . 67
6.6a.9.2 Description . 68
6.6a.9.3 &D set syntax . 68
6.6a.9.4 &D read syntax . 68
6.6a.9.5 &D read result code text . 68
6.6a.9.6 &D test syntax . 68
6.6a.9.7 &D test result syntax . 68
6.6a.10 PEI data rate: +IPR . 68
6.6a.10.1 General on +IPR . 68
6.6a.10.2 Description . 68
6.6a.10.3 +IPR set syntax . 68
6.6a.10.4 +IPR read syntax . 69
6.6a.10.5 +IPR read result code text . 69
6.6a.10.6 +IPR test syntax . 69
6.6a.10.7 +IPR test result syntax . 69
6.7 Existing V.250 commands for generic MT control . 69
6.7a Modified V.250 commands for generic MT control . 69
6.7a.1 General on modified V.250 commands for generic MT control . 69
6.7a.2 Full factory defaults Z. 70
6.7a.2.1 General on full factory defaults Z . 70
6.7a.2.2 Description . 70
6.7a.2.3 Z execution syntax . 70
6.7a.2.4 Z test syntax . 70
6.7a.3 Factory defaults &F .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.