ETSI ETS 300 623 ed.1 (1996-06)

Digital cellular telecommunications system (Phase 2) (GSM); Network Management (NM) procedures and messages on the A-bis interface (GSM 12.21)

DE/SMG-061221P

Digitalni celični telekomunikacijski sistem (faza 2) ¬– Postopki upravljanja omrežja (NM) in sporočila o vmesniku A-bis (GSM 12.21)

General Information

• Status: Published
• Publication Date: 01-Aug-1996
• Technical Committee: SMG 6 - Operations & Maintenance
• Current Stage: 12 - Completion
• Due Date: 27-Jun-1996
• Completion Date: 02-Aug-1996
• Ref Project: SIST ETS 300 623 E1:2003 - Digital cellular telecommunications system (Phase 2) (GSM); Network Management (NM) procedures and messages on the A-bis interface (GSM 12.21)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 623 E1:2003
01-december-2003
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHPID]D¤±3RVWRSNLXSUDYOMDQMDRPUHåMD
10LQVSRURþLODRYPHVQLNX$ELV*60
Digital cellular telecommunications system (Phase 2) (GSM); Network Management
(NM) procedures and messages on the A-bis interface (GSM 12.21)
Ta slovenski standard je istoveten z: ETS 300 623 Edition 1
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
SIST ETS 300 623 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 623 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 623 E1:2003
EUROPEAN ETS 300 623
TELECOMMUNICATION June 1996
STANDARD
Source: ETSI TC-SMG Reference: DE/SMG-061221P
ICS: 33.060.50
Key words: Digital cellular telecommunications system, Global System for Mobile Communications (GSM)
Digital cellular telecommunication system (Phase 2);
Network Management (NM) procedures and messages on the
A-bis interface
(GSM 12.21)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: 06921 Sophia Antipolis Cedex - FRANCE
Office address: Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 623 E1:2003
Page 2
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 623 E1:2003
Page 3
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
Contents
Foreword.7
Introduction .7
1. Scope .9
2. Normative References .9
3. Definitions and Abbreviations.10
3.1. Definitions.10
3.2. Abbreviations.10
4. Functional Split between BSC and BTS.11
5. Information Model .12
5.1. Managed Objects.12
5.2. Addressing of Objects .14
5.3. State Management of Objects.15
5.3.1. Administrative State.15
5.3.2. Operational State and Availability Status.16
6. Elementary Procedures .18
6.1. Definition of the Procedures.18
6.2. SW Download Management Procedures.19
6.2.1. Load Data Initiate.19
6.2.2. Load Data Segment .19
6.2.3. Load Data Abort . 19
6.2.4. Load Data End.20
6.2.5. SW Activate Request.20
6.2.6. Activate SW.20
6.2.7. SW Activated Report.20
6.3. A-bis Interface Management Procedures .21
6.3.1. Establish TEI .21
6.3.2. Connect Terrestrial Signalling .21
6.3.3. Disconnect Terrestrial Signalling .21
6.3.4. Connect Terrestrial Traffic .22
6.3.5. Disconnect Terrestrial Traffic .22
6.4. Transmission Management Procedures.22
6.4.1. Connect Multi-drop Link .22
6.4.2. Disconnect Multi-drop Link .22
6.5. Air Interface Management Procedures.23
6.5.1. Set BTS Attributes .23
6.5.2. Set Radio Carrier Attributes .23
6.5.3. Set Channel Attributes .23
6.6. Test Management Procedures .23
6.6.1. Perform Test . 23
6.6.2. Test Report . 24
6.6.3. Send Test Report.24
6.6.4. Stop Test . 24
6.7. State Management and Event Report Procedures .25
6.7.1. State Changed Event Report.25
6.7.2. Failure Event Report.25
6.7.3. Stop Sending Event Reports .25
6.7.4. Restart Sending Event Reports .26

---------------------- Page: 5 ----------------------

SIST ETS 300 623 E1:2003
Page 4
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
6.7.5. Change Administrative State.26
6.7.6. Change Administrative State Request .26
6.8. Equipment Management Procedures.26
6.8.1. Change-over .26
6.8.2. Opstart.27
6.8.3. Reinitialize.27
6.8.4. Set Site Outputs.27
6.9. Miscellaneous Procedures .28
6.9.1. Get Attributes .28
6.9.2. Set Alarm Threshold.28
7. Structured Procedures.29
8. Message Details .29
8.1. Message Categories .29
8.1.1. Formatted O&M Messages.29
8.1.2. MMI Transfer.30
8.1.3. TRAU O&M Messages .30
8.1.4. Manufacturer-Defined O&M messages.31
8.2. Structure of Formatted O&M Messages.31
8.3. SW Download Management Messages.32
8.3.1. Load Data Initiate.32
8.3.2. Load Data Segment.33
8.3.3. Load Data Abort.33
8.3.4. Load Data End.33
8.3.5. SW Activate Request.33
8.3.6. Activate SW.33
8.3.7. SW Activated Report .34
8.4. A-bis Interface Management Messages.34
8.4.1. Establish TEI.34
8.4.2. Connect Terrestrial Signalling .34
8.4.3. Disconnect Terrestrial Signalling .34
8.4.4. Connect Terrestrial Traffic.34
8.4.5. Disconnect Terrestrial Traffic.35
8.5. Transmission Management Messages .35
8.5.1. Connect Multi-drop link.35
8.5.2. Disconnect Multi-drop link.35
8.6. Air Interface Management Messages.36
8.6.1. Set BTS Attributes.36
8.6.2. Set Radio Carrier Attributes .36
8.6.3. Set Channel Attributes .37
8.7. Test Management Messages.37
8.7.1. Perform Test.37
8.7.2. Test Report .37
8.7.3. Send Test Report.38
8.7.4. Stop Test.38
8.8. State Management and Event Report Messages .38
8.8.1. State Changed Event Report.38
8.8.2. Failure Event Report.38
8.8.3. Stop Sending Event Reports.39
8.8.4. Restart Sending Event Reports.39
8.8.5. Change Administrative State.39
8.8.6. Change Administrative State Request .40
8.9. Equipment Management Messages .40
8.9.1. Changeover .40
8.9.2. Opstart.40
8.9.3. Reinitialize.40
8.9.4. Set Site Outputs.41
8.10. Miscellaneous Messages.41
8.10.1. Get Attributes .41

---------------------- Page: 6 ----------------------

SIST ETS 300 623 E1:2003
Page 5
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
8.10.2. Set Alarm Threshold.41
9. Coding.42
9.1. Message Type.42
9.2. Object Class.44
9.3. Object Instance.44
9.4. Attributes and Parameters .45
9.4.1. Abis Channel.46
9.4.2. Additional Info .47
9.4.3. Additional Text .47
9.4.4. Administrative State.47
9.4.5. ARFCN List.47
9.4.6. Autonomously Report .48
9.4.7. Availability Status .48
9.4.8. BCCH ARFCN.48
9.4.9. BSIC.48
9.4.10. BTS Air Timer .48
9.4.11. CCCH Load Indication Period.49
9.4.12. CCCH Load Threshold.49
9.4.13. Channel Combination.49
9.4.14. Connection Failure Criterion .49
9.4.15. Destination.50
9.4.16. Event Type .50
9.4.17. File Data.50
9.4.18. File Id.51
9.4.19. File Version.51
9.4.20. GSM Time.51
9.4.21. HSN .51
9.4.22. HW Configuration .51
9.4.23. HW Description.52
9.4.24. Intave Parameter .52
9.4.25. Interference level Boundaries .52
9.4.26. List of Required Attributes. 53
9.4.27. MAIO. 53
9.4.28. Manufacturer Dependent State.53
9.4.29. Manufacturer Dependent Thresholds.53
9.4.30. Manufacturer Id.53
9.4.31. Max Timing Advance.54
9.4.32. Multi-drop BSC Link.54
9.4.33. Multi-drop next BTS Link.55
9.4.34. Nack Causes .55
9.4.35. Ny1.56
9.4.36. Operational State. 56
9.4.37. Overload Period.56
9.4.38. Physical Config .56
9.4.39. Power Class . 56
9.4.40. Power Output Thresholds .57
9.4.41. Probable Cause .57
.9.4.42. RACH Busy Threshold .57
9.4.43. RACH Load Averaging Slots.58
9.4.44. Radio Sub Channel.58
9.4.45. RF Max Power Reduction .58
9.4.46. Site Inputs .58
9.4.47. Site Outputs.59
9.4.48. Source .59
9.4.49. Specific Problems .59
9.4.50. Starting Time .59
9.4.51. T200 .60
9.4.52. TEI.60
9.4.53. Test Duration . 60

---------------------- Page: 7 ----------------------

SIST ETS 300 623 E1:2003
Page 6
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
9.4.54. Test No .60
9.4.55. Test Report Info.61
9.4.56. VSWR Thresholds.61
9.4.57. Window Size .61
9.4.58. TSC .61
9.4.59. SW Configuration .62
9.4.60. SW Description .62
9.4.61. Perceived Severity.62
History .63

---------------------- Page: 8 ----------------------

SIST ETS 300 623 E1:2003
Page 7
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
Foreword
This European Telecommunication Standard (ETS) has been produced by the Special Mobile Group
(SMG) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS describes the network management messages and procedures across the A-bis interface within
the Digital cellular telecommunications system. This ETS corresponds to GSM technical specification,
GSM 12.21, version 4.5.4.
NOTE: TC-SMG has produced documents which give technical specifications for the
implementation of the Digital cellular telecommunications system. Historically, these
documents have been identified as GSM Technical Specifications (GSM-TSs). These
specifications may subsequently become I-ETSs (Phase 1), or European
Telecommunication Standards (ETSs)(Phase 2), whilst others may become ETSI
Technical Reports (ETRs). These ETSI-GSM Technical Specifications are, for editorial
reasons, still referred to in this ETS.
Transposition dates
Date of adoption of this ETS: 06 June 1996
Date of latest announcement of this ETS (doa): 26 September 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 27 March 1997
Date of withdrawal of any conflicting National Standard (dow): 27 March 1997
Introduction
(Background)
The use and general aspects of the A-bis interface are given in specification GSM 08.51. The split of
telecommunications functions and management procedures between BSC and BTS are defined in
specification GSM 08.52. Specification GSM 08.56 defines Layer 2 of the signalling messages.
The general aspects of NM are defined in specification GSM 12.00. Qx interface and protocol stack are
defined in specification GSM 12.01. GSM 12.06 provides the functional requirements supported by this
ETS. The NM procedures and messages to support these operations over the A-bis interface are
specified here. Specification GSM 12.20 provides the information model as seen on the OMC-BSC
interface. Interworking between this model and the NM messages and procedures provided here is
specified in GSM 12.22.

---------------------- Page: 9 ----------------------

SIST ETS 300 623 E1:2003
Page 8
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
Blank page

---------------------- Page: 10 ----------------------

SIST ETS 300 623 E1:2003
Page 9
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
1. Scope
This European Telecommunication Standard (ETS) addresses the network management messages and
procedures across the A-bis interface, which is defined as Qx in GSM. The information model included
here defines the objects and how they are addressed for purposes of operations and maintenance
activities.
There is a requirement for the A-bis interface to be open to allow interoperation between BTSs of different
manufacturers working to the same BSC. This ETS addresses this requirement from O&M point of view,
which allows this interworking to take place. It shows the split of NM functions between BSC and BTS. The
procedures and coding of the messages are specified in detail. In practice, in addition to this ETS it is
necessary that the content of manufacturer-dependent information fields be specified to fulfill the
functionality.
It is essential for operation that a BSC can handle the functions used by all its BTSs. Therefore, all items in
this ETS are considered mandatory unless otherwise indicated in this ETS.
2. Normative References
This ETS incorporates by dated or undated reference, provisions from other publications. These normative
references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references subsequent amendments to, or revisions of, any of these publications apply to this ETS
only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies.
[1] GSM 01.04 (ETR 100): "Digital cellular telecommunication system (Phase 2);
Abbreviations and acronyms".
[2] GSM 04.06 (ETS 300 555): "Digital cellular telecommunication system
(Phase 2); Mobile Station - Base Station System (MS - BSS) interface Data
Link (DL) layer specification".
[3] GSM 04.08 (ETS 300 557): "Digital cellular telecommunication system
(Phase 2); Mobile radio interface layer 3 specification".
[4] GSM 05.02 (ETS 300 574): "Digital cellular telecommunication system
(Phase 2); Multiplexing and multiple access on the radio path".
[5] GSM 05.05 (ETS 300 577): "Digital cellular telecommunication system
(Phase 2); Radio transmission and reception".
[6] GSM 05.08 (ETS 300 578): "Digital cellular telecommunication system
(Phase 2); Radio subsystem link control".
[7] GSM 08.51 (ETS 300 592): "Digital cellular telecommunication system
(Phase 2); Base Station Controller - Base Transceiver Station (BSC - BTS)
interface General aspects".
[8] GSM 08.52 (ETS 300 593): "Digital cellular telecommunication system
(Phase 2); Base Station Controller - Base Transceiver Station (BSC - BTS)
interface Interface principles".
[9] GSM 08.56 (ETS 300 595): "Digital cellular telecommunication system
(Phase 2); Base Station Controller - Base Transceiver Station (BSC - BTS)
interface Layer 2 specification".
[10] GSM 08.58 (ETS 300 596): "Digital cellular telecommunication system
(Phase 2); Base Station Controller - Base Transceiver Station (BSC - BTS)
interface Layer 3 specification".

---------------------- Page: 11 ----------------------

SIST ETS 300 623 E1:2003
Page 10
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
[11] GSM 12.00 (ETS 300 612-1): "Digital cellular telecommunication system
(Phase 2); Objectives and structure of Network Management (NM)".
[12] GSM 12.01 (ETS 300 612-2): "Digital cellular telecommunication system
(Phase 2); Common aspects of GSM Network Management (NM)".
[13] GSM 12.06 (ETS 300 617): "Digital cellular telecommunication system
(Phase 2); GSM Network Configuration Management and Administration".
[14] GSM 12.20 (ETS 300 622): "Digital cellular telecommunication system
(Phase 2); Base Station System (BSS) Management Information".
[15] GSM 12.22 (ETS 300 624): "Digital cellular telecommunication system
(Phase 2); Interworking of GSM Network Management (NM) procedures and
messages at the Base Station Controller (BSC)".
3. Definitions and Abbreviations
3.1. Definitions
Definitions of terms used within this ETS may be found mostly in clause5 in text context.
3.2. Abbreviations
For the purpose of this ETS the following abbreviations apply.
ASN.1 (CCITT) Abstract Syntax Notation One
BSC Base Station Controller
BSS Base Station System
BTS Base Transceiver Station
HW Hardware
LSB Least Significant Byte
MMI Man-machine Interface
MSB Most Significant Byte
MSC Mobile-services Switching Centre
NE Network Element
NM Network Management
O&M Operations and Maintenance
OMC Operations and Maintenance Centre
RF Radio Frequency
SAPI Service Access Point Indicator
SW Software
TEI Terminal End-point Identifier
TMN Telecommunications Management Network
TSC Training Sequence Code
cont. continued
man. dep. manufacturer dependent (with upper and lower case adjusted as appropriate)
Further GSM related abbreviations may be found in GSM 01.04 (ETR 100)[1].

---------------------- Page: 12 ----------------------

SIST ETS 300 623 E1:2003
Page 11
ETS 300 623: June 1996 (GSM 12.21 version 4.5.4)
4. Functional Split between BSC and BTS
Functional split of management functions between BSC and BTS is shown in Table 1.
Table 1/GSM 12.21. Split of management functions between BSC and BTS
BSC BTS
Fault Management
BTS
test request X -
tes
...