ETSI ETS 300 019-2-8 ed.1 (1997-09)

Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-8: Specification of environmental tests; Stationary use at underground locations

DE/EE-01019-2-8

Inženiring opreme (EE) - Pogoji okolja in preskusi vplivov okolja za telekomunikacijsko opremo – Del 2-8: Specifikacija preskusov vplivov okolja - Mirujoča (stacionarna) uporaba na podzemnih lokacijah

General Information

• Status: Published
• Publication Date: 17-Sep-1997
• Technical Committee: EE 1 - EE Environmental Conditions
• Current Stage: 12 - Completion
• Due Date: 26-Sep-1997
• Completion Date: 18-Sep-1997
• Ref Project: SIST ETS 300 019-2-8:1999 - Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-8: Specification of environmental tests; Stationary use at underground locations

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 019-2-8:1999
01-november-1999
,QåHQLULQJRSUHPH((3RJRMLRNROMDLQSUHVNXVLYSOLYRYRNROMD]D
WHOHNRPXQLNDFLMVNRRSUHPR±'HO6SHFLILNDFLMDSUHVNXVRYYSOLYRYRNROMD
0LUXMRþDVWDFLRQDUQDXSRUDEDQDSRG]HPQLKORNDFLMDK
Equipment Engineering (EE); Environmental conditions and environmental tests for
telecommunications equipment; Part 2-8: Specification of environmental tests; Stationary
use at underground locations
Ta slovenski standard je istoveten z: ETS 300 019-2-8 Edition 1
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST ETS 300 019-2-8:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 019-2-8:1999

---------------------- Page: 2 ----------------------

SIST ETS 300 019-2-8:1999
EUROPEAN ETS 300 019-2-8
TELECOMMUNICATION September 1997
STANDARD
Source: EE Reference: DE/EE-01019-2-8
ICS: 33.020
Key words: environment, testing, underground
Equipment Engineering (EE);
Environmental conditions and environmental tests for
telecommunications equipment;
Part 2-8: Specification of environmental tests
Stationary use at underground locations
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 019-2-8:1999
Page 2
ETS 300 019-2-8: September 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 019-2-8:1999
Page 3
ETS 300 019-2-8: September 1997
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Environmental test specifications.7
3.1 Specification T 8.1: Partly weatherprotected underground locations.7
4 Earthquake test specification .12
Annex A (informative): Bibliography.13
History.14

---------------------- Page: 5 ----------------------

SIST ETS 300 019-2-8:1999
Page 4
ETS 300 019-2-8: September 1997
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 019-2-8:1999
Page 5
ETS 300 019-2-8: September 1997
Foreword
This multi-part European Telecommunication Standard (ETS) has been produced by the Equipment
Engineering (EE) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS consists of 2 parts as follows:
Part 1: "Classification of environmental conditions";
Part 2: "Specification of environmental tests".
Part 1 specifies different standardized environmental classes covering climatic and biological conditions,
chemically and mechanically active substances and mechanical conditions during storage, transportation
and in use.
Part 2 specifies the recommended test severities and test methods for the different environmental
classes.
Each part of the standard is divided into sub-parts. Sub-part 2-0 forms a general overview of part 2. This
sub-part 2-8 deals with stationary use at underground locations.
Transposition dates
Date of adoption: 5 September 1997
Date of latest announcement of this ETS (doa): 31 December 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 June 1998
Date of withdrawal of any conflicting National Standard (dow): 30 June 1998

---------------------- Page: 7 ----------------------

SIST ETS 300 019-2-8:1999
Page 6
ETS 300 019-2-8: September 1997
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 019-2-8:1999
Page 7
ETS 300 019-2-8: September 1997
1 Scope
This European Telecommunication Standard (ETS) specifies test severities and methods for the
verification of the required resistibility of equipment according to the relevant environmental class.
The tests in sub-part 2-8 of this multi-part standard apply to stationary use of equipment at underground
locations covering the environmental conditions stated in ETS 300 019-1-8 [1].
2 Normative references
This ETS incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 019-1-8: "Equipment Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 1-8: Classification
of environmental conditions Stationary use at underground locations".
[2] IEC 68-2: "Basic environmental testing procedures; Part 2: Tests".
IEC 68-2-1: "Tests A: Cold".
IEC 68-2-2: "Tests B: Dry Heat".
IEC 68-2-6: "Test FC: Vibration (Sinusoidal)".
IEC 68-2-14: "Test N: Change of Temperature".
IEC 68-2-17: "Test Q: Sealing".
IEC 68-2-27: "Test Ea and Guidance: Shock".
IEC 68-2-29: "Tests Eb and Guidance: Bump".
IEC 68-2-30: "Test Db and Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle)".
IEC 68-2-56: "Test Cb: Damp Heat, Steady State, Primarily for Equipment".
[3] ETS 300 019-2-0: "Equipment Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment; Part 2-0: Specification
of environmental tests Introduction".
3 Environmental test specifications
The detailed descriptions of the environmenta
...