Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Test Case Library (TCL); Part 7: Abstract Test Suite (ATS) for Network (NWK) layer - Portable radio Termination (PT)

RE/DECT-040094-7

Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Skupni vmesnik (CI) – Knjižnica preskušalnih primerov (TCL) – 7. del: Abstraktni preskušalni niz (ATS) za omrežno plast (NWK) – Prenosna radijska zaključitev (PT)

General Information

Status
Published
Publication Date
12-Feb-1998
Technical Committee
Current Stage
12 - Completion
Due Date
13-Feb-1998
Completion Date
13-Feb-1998
Mandate

Buy Standard

Standard
ETS 300 497-7 E2:2003
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 497-7 E2:2003
01-december-2003
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 ±6NXSQLYPHVQLN &, ±
.QMLåQLFDSUHVNXãDOQLKSULPHURY 7&/ ±GHO$EVWUDNWQLSUHVNXãDOQLQL] $76 ]D
RPUHåQRSODVW 1:. ±3UHQRVQDUDGLMVND]DNOMXþLWHY 37
Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Test
Case Library (TCL); Part 7: Abstract Test Suite (ATS) for Network (NWK) layer - Portable
radio Termination (PT)
Ta slovenski standard je istoveten z: ETS 300 497-7 Edition 2
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST ETS 300 497-7 E2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 497-7 E2:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 497-7 E2:2003
EUROPEAN ETS 300 497-7
TELECOMMUNICATION February 1998
STANDARD Second Edition
Source: DECT Reference: RE/DECT-040094-7
ICS: 33.020
Key words: ATS, DECT, PIXIT, radio, testing
Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI) Test Case Library (TCL);
Part 7: Abstract Test Suite (ATS) for Network (NWK) layer -
Portable radio Termination (PT)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 497-7 E2:2003
Page 2
ETS 300 497-7: February 1998
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 497-7 E2:2003
Page 3
ETS 300 497-7: February 1998
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions, symbols and abbreviations.9
3.1 Definitions .9
3.2 DECT abbreviations.9
4 Abstract Test Method (ATM).10
4.1 ATM .10
4.2 DLC primitives.11
4.2.1 S-SAP primitives .11
4.2.2 B-SAP primitives .14
4.3 TC execution sequence .15
5 Untestable Test Purposes (TP).15
6 ATS conventions .15
6.1 Naming conventions .15
6.1.1 Declarations part .15
6.1.1.1 Test suite type, ASP and PDU type definitions.16
6.1.1.2 Test Suite Operations (TSO) definitions.16
6.1.1.3 Test suite selection expressions.16
6.1.1.4 Test Suite Parameter (TSP) declarations.16
6.1.1.5 Test Case Selection (TCS) expression definitions .16
6.1.1.6 Test Suite Constant (TSC) declarations.17
6.1.1.7 Test Suite Variable (TSV) declarations .17
6.1.1.8 Test Case Variable (TCV) declarations.17
6.1.1.9 Point of Control and Observation (PCO) declarations.17
6.1.1.10 Timer declarations.17
6.1.1.11 ASP type definitions.18
6.1.1.12 PDU type definitions .18
6.1.1.13 Alias definitions.18
6.1.2 Constraints part.18
6.1.3 Dynamic part .20
6.1.3.1 Test Case (TC) identifier .20
6.1.3.2 Test Step (TS) identifier.20
6.1.3.3 Default identifier.20
6.1.3.4 General aspects .20
6.1.3.5 ATS abbreviations .20
6.2 Implementation conventions .21
6.2.1 Declaration part .21
6.2.2 Constraint part.21
6.2.3 Dynamic part .22
6.2.4 Documentation .22
Annex A (normative): Abstract Test Suite (ATS) for NWK testing .23
A.1 The machine processable ATS (TTCN.MP) .23
A.2 The graphical ATS (TTCN.GR).23
Annex B (normative): Partial PIXIT proforma.24

---------------------- Page: 5 ----------------------

SIST ETS 300 497-7 E2:2003
Page 4
ETS 300 497-7: February 1998
B.1 Identification summary. 24
B.2 ATS summary. 24
B.3 Test laboratory. 24
B.4 Client identification. 24
B.5 SUT. 25
B.6 Protocol layer information. 25
B.6.1 Protocol identification . 25
B.6.2 IUT information. 26
Annex C (normative): Protocol Conformance Test Report (PCTR) proforma for DECT NWK . 30
C.1 Identification summary. 30
C.1.1 Protocol conformance test report. 30
C.1.2 IUT identification. 30
C.1.3 Testing environment. 30
C.1.4 Limits and reservation . 30
C.1.5 Comments. 31
C.2 IUT conformance status . 31
C.3 Static conformance summary. 31
C.4 Dynamic conformance summary. 31
C.5 Static conformance review report . 31
C.6 Test campaign report. 32
C.7 Observations. 34
Annex D (informative): Bibliography . 35
History. 36

---------------------- Page: 6 ----------------------

SIST ETS 300 497-7 E2:2003
Page 5
ETS 300 497-7: February 1998
Foreword
This second edition European Telecommunication Standard (ETS) has been produced by the Digital
Enhanced Cordless Telecommunications (DECT) Project of the European Telecommunications
Standards Institute (ETSI).
This ETS comprises nine parts, as follows:
Part 1: "Test Suite Structure (TSS) and Test Purposes (TP) for Medium Access Control (MAC)
layer";
Part 2: "Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Portable radio
Termination (PT)";
Part 3: "Abstract Test Suite (ATS) for Medium Access Control (MAC) layer - Fixed radio Termination
(FT)";
Part 4: "Test Suite Structure (TSS) and Test Purposes (TP) - Data Link Control (DLC) layer";
Part 5: "Abstract Test Suite (ATS) - Data Link Control (DLC) layer";
Part 6: "Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Portable radio
Termination (PT)";
Part 7: "Abstract Test Suite (ATS) for Network (NWK) layer - Portable radio Termination (PT)";
Part 8: "Test Suite Structure (TSS) and Test Purposes (TP) - Network (NWK) layer - Fixed radio
Termination (FT)";
Part 9: "Abstract Test Suite (ATS) for Network (NWK) layer - Fixed radio Termination (FT)".
Transposition dates
Date of adoption of this ETS: 23 January 1998
Date of latest announcement of this ETS (doa): 31 May 1998
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 November 1998
Date of withdrawal of any conflicting National Standard (dow): 30 November 1998

---------------------- Page: 7 ----------------------

SIST ETS 300 497-7 E2:2003
Page 6
ETS 300 497-7: February 1998
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 497-7 E2:2003
Page 7
ETS 300 497-7: February 1998
1 Scope
This European Telecommunication Standard (ETS) contains the Abstract Test Suite (ATS) to test the
Network (NWK) layer, Portable radio Termination (PT).
The objective of this test specification is to provide a basis for approval tests for DECT equipment giving a
high probability of air interface inter-operability between different manufacturer's DECT equipment. Part 7
of this test specification contains the Abstract Test Suite for testing of the NWK layer at the PT.
The ISO standard for the methodology of conformance testing (ISO/IEC 9646 parts 1 to 7 [12] to [18]) as
well as the ETSI rules for conformance testing (protocol and profile conformance testing specifications,
standardization methodology ETS 300 406 [10]) are used as basis for the test methodology.
Test specifications for the Physical Layer (PHL) are provided in other DECT standards.
Annex B provides the partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 1: Overview".
[2] ETS 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 2: Physical layer (PHL)".
[3] ETS 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETS 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETS 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 5: Network (NWK) layer".
[6] ETS 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 6: Identities and addressing".
[7] ETS 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 7: Security features".
[8] ETS 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 8: Speech coding and transmission".
[9] ETS 300 324-3: "Signalling Protocols and Switching (SPS); V interfaces at the
digital Local Exchange (LE); V5.1 interface for the support of Access Network
(AN); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for
the network layer (AN side)".
[10] ETS 300 406: "Methods for Testing and Specification (MTS); Protocol and
profile conformance testing specifications; Standardization methodology".
[11] ETS 300 444: "Digital European Cordless Telecommunications (DECT); Generic
Access Profile (GAP)".

---------------------- Page: 9 ----------------------

SIST ETS 300 497-7 E2:2003
Page 8
ETS 300 497-7: February 1998
[12] ISO/IEC 9646-1 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 1:
General concepts". (See also CCITT Recommendation X.290 (1991)).
[13] ISO/IEC 9646-2 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 2:
Abstract test suite specification". (See also CCITT Recommendation X.291
(1991)).
[14] ISO/IEC 9646-3 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 3:
The tree and tabular combined notation". (See also CCITT Recommendation
X.292 (1992)).
[15] ISO/IEC 9646-4 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 4:
Test realisation". (See also CCITT Recommendation X.292 (1992)).
[16] ISO/IEC 9646-5 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 5:
Requirements on test laboratories and clients for the conformance assessment
process". (See also CCITT Recommendation X.292 (1992)).
[17] ISO/IEC 9646-6 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 6:
Protocol profile test specification".
[18] ISO/IEC 9646-7 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 7:
Implementation conformance statement".
[19] 91/263/EEC: "Council Directive of 29 April 1991 on the approximation of the
laws of the Member States concerning telecommunications terminal equipment,
including the mutual recognition of their conformity" (Terminal Directive).
[20] TBR 6: "Digital Enhanced Cordless Telecommunications (DECT); General
terminal attachment requirements".
[21] TBR 10: "Digital Enhanced Cordless Telecommunications (DECT); General
terminal attachment requirements; Telephony applications".
[22] TBR 11: "Attachment requirements for terminal equipment for Digital Enhanced
Cordless Telecommunications (DECT) Public Access Profile (PAP)
applications".
[23] TBR 22: "Attachment requirements for terminal equipment for Digital Enhanced
Cordless Telecommunications (DECT) Generic Access Profile (GAP)
applications".
[24] ETR 141: "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications; The Tree and Tabular Combined Notation
(TTCN) style guide".

---------------------- Page: 10 ----------------------

SIST ETS 300 497-7 E2:2003
Page 9
ETS 300 497-7: February 1998
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of this ETS, the definitions given in ISO/IEC 9646-1 [12], ISO/IEC 9646-2 [13],
ETS 300 175-1 [1], ETS 300 175-5 [5], ETS 300 175-6 [6] and ETS 300 175-7 [7] apply.
3.2 DECT abbreviations
For the purposes of this ETS, the following abbreviations apply:
AC Authentication Code
AR Access Rights
ASP Abstract Service Primitive
ATS Abstract Test Suite
AU Authentication
BI Invalid Behaviour
BO Inopportune Behaviour
BV Valid Behaviour
CA Capability
CC Call Control
CH Ciphering
CI Call Information
CR Call Release
DECT Digital Enhanced Cordless Telecommunication
DLC Data Link Control
FT Fixed radio Termination
IC Incoming Call
ID Identification
IPEI International Portable Equipment Identity
IPUI International Portable User Identity
IUT Implementation Under Test
IWU Interworking Unit
KA Key Allocation
LC Link Control entity
LE Connection oriented Link Establishment
LL Connectionless Link control
LO Location
LR Connection oriented Link Release
LS Connection oriented Link Suspend and resume
LT Lower Tester
MAC Medium Access Control
ME Management Entity
MM Mobility Management
MO Connection Oriented Message Services
NWK Network layer
OC Outgoing Call
PARK Portable Access Rights Key
PCO Point of Control and Observation
PCTR Protocol Conformance Test Report
PDU Protocol Data Unit
PHL Physical Layer
PICS Protocol Implementation Conformance Statement
PIXIT Protocol Implementation Extra Information for Testing
PT Portable radio Termination
RPN Radio Fixed Part Number
RS Call Related Supplementary Services
SUT System Under Test
TCS Test Case Selection
TCV Test Case Variable
TP Test Purposes
TSC Test Suite Constant
TSO Test Suite Operation

---------------------- Page: 11 ----------------------

SIST ETS 300 497-7 E2:2003
Page 10
ETS 300 497-7: February 1998
TSP Test Suite Parameter
TSS Test Suite Structure
TSV Test Suite Variable
TTCN Tree and Tabular Combined Notation
UT Upper Tester
4 Abstract Test Method (ATM)
This clause describes the ATM, the Point of Control and Observation (PCO) used to test the NWK layer of
the PT.
4.1 ATM
SUT
Test System
Portable Termination
Upper
LT
Layers
DECT NWK
NWK-PDUs
IUT
DLC-
PCO/DSAP
DLC-
Primitives
DECT DLC layer
DECT DLC layer DECT DLC layer
DECT MAC layer
DECT MAC layer
DECT PHL and radio communication
Figure 1: Remote single layer test method embedded variant
LT1: a lower tester (LT1) is located in a remote DECT test system. It controls and
observes the behaviour of the Implementation Under Test (IUT).
DSAP: a unique Data Link Control (DLC) SAP is defined at the DECT interface and
used to exchange service data of the NWK protocol.
PCO: the PCO for Network Layer testing is located on the DSAP. All test events at the
PCO are specified in terms of DLC Abstract Service Primitives (ASPs) and
NWK Protocol Data Units (PDUs).

---------------------- Page: 12 ----------------------

SIST ETS 300 497-7 E2:2003
Page 11
ETS 300 497-7: February 1998
Upper layers/tester: no explicit Upper Tester (UT) exists in the test system. However, the System
Under Test (SUT) needs to carry out some UL functions to achieve some
effects of test co-ordination procedures. Designing ATS, the capability of the
Interworking Unit (IWU), such as PSTN, ISDN or GSM IWUs might be taken
into account. An example of such controls could be to provoke restarting of the
IUT through the Q interface.
4.2 DLC primitives
In this subclause the DSAP primitives are defined according to ETS 300 175-4 [4], subclause 8.3.2
(S-SAP primitives) and ETS 300 175-4 [4], subclause 8.3.3 (B-SAP primitives).
4.2.1 S-SAP primitives
Table 1: DL_DATA_IND primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_DATA_IND S-SAP ETS 300 175-4 [4], subclause 8.3.2.3
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
message_unit PDU ETS 300 175-4 [4], subclause 8.3.1
Table 2: DL_DATA_REQ primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_DATA_REQ S-SAP ETS 300 175-4 [4], subclause 8.3.2.3
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
message_unit PDU ETS 300 175-4 [4], subclause 8.3.1
Table 3: DL_ENCRYPT_CNF primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_ENCRYPT_CNF S-SAP ETS 300 175-4 [4], subclause 8.3.2.8
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
encription_status CIPHER_STATUS ETS 300 175-4 [4], subclause 8.3.1
(INTEGER(0,1))

---------------------- Page: 13 ----------------------

SIST ETS 300 497-7 E2:2003
Page 12
ETS 300 497-7: February 1998
Table 4: DL_ENCRYPT_IND primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_ENCRYPT_IND S-SAP ETS 300 175-4 [4], subclause 8.3.2.8
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
connection_identities CONNECTION_IDENTITIE ETS 300 175-4 [4], subclause 8.3.1
S
(OCTETSTRING)
encription_status CIPHER_STATUS ETS 300 175-4 [4], subclause 8.3.1
(INTEGER(0,1)
Table 5: DL_ENCRYPT_REQ primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_ENCRYPT_REQ S-SAP ETS 300 175-4 [4], subclause 8.3.2.8
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
connection_identities CONNECTION_IDENTITIE ETS 300 175-4 [4], subclause 8.3.1
S
(OCTETSTRING)
encription_status CIPHER_STATUS ETS 300 175-4 [4], subclause 8.3.1
(INTEGER(0,1)
Table 6: DL_ENC_KEY_REQ primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_ENC_KEY_REQ S-SAP ETS 300 175-4 [4], subclause 8.3.2.7
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
connection_identities CONNECTION_IDENTITIE ETS 300 175-4 [4], subclause 8.3.1
S
(OCTETSTRING)
encription_key ENCRYPTION_KEY ETS 300 175-4 [4], subclause 8.3.1
(BITSTRING[64])

---------------------- Page: 14 ----------------------

SIST ETS 300 497-7 E2:2003
Page 13
ETS 300 497-7: February 1998
Table 7: DL_ESTABLISH_CNF primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_ESTABLISH_CNF S-SAP ETS 300 175-4 [4], subclause 8.3.2.1
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
Table 8: DL_ESTABLISH_IND primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_ESTABLISH_IND S-SAP ETS 300 175-4 [4], subclause 8.3.2.1
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
establish_mode ESTABLISH_MODE ETS 300 175-4 [4], subclause 8.3.1
(INTEGER(0,1,2)
radio_fixed_part_number RADIO_FIXED_PART_NUMETS 300 175-4 [4], subclause 8.3.1
BER
(INTEGER)
message_unit PDU ETS 300 175-4 [4], subclause 8.3.1
Table 9: DL_ESTABLISH_REQ primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_ESTABLISH_REQ S-SAP ETS 300 175-4 [4], subclause 8.3.2.1
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
establish_mode ESTABLISH_MODE ETS 300 175-4 [4], subclause 8.3.1
(INTEGER(0,1,2)
radio_fixed_part_number RADIO_FIXED_PART_NUMETS 300 175-4 [4], subclause 8.3.1
BER
(INTEGER)
message_unit PDU ETS 300 175-4 [4], subclause 8.3.1
Table 10: DL_ESTABLISH_RES primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_ESTABLISH_RES S-SAP ETS 300 175-4 [4], subclause 8.3.2.1
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)

---------------------- Page: 15 ----------------------

SIST ETS 300 497-7 E2:2003
Page 14
ETS 300 497-7: February 1998
Table 11: DL_RELEASE_CNF primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_RELEASE_CNF S-SAP ETS 300 175-4 [4], subclause 8.3.2.2
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
release_mode RELEASE_MODE ETS 300 175-4 [4], subclause 8.3.1
(INTEGER(0,1)
Table 12: DL_RELEASE_IND primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_RELEASE_IND S-SAP ETS 300 175-4 [4], subclause 8.3.2.2
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
release_mode RELEASE_MODE ETS 300 175-4 [4], subclause 8.3.1
(INTEGER(0,1)
Table 13: DL_RELEASE_REQ primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_RELEASE_REQ S-SAP ETS 300 175-4 [4], subclause 8.3.2.2
Service control information
Parameter name Type Comments
data_link_endpoint_identifier DATA_LINK_ENDPOINT_IDETS 300 175-4 [4], subclause 7.3.6
ENTIFIER
(INTEGER)
release_mode RELEASE_MODE ETS 300 175-4 [4], subclause 8.3.1
(INTEGER(0,1)
4.2.2 B-SAP primitives
Table 14: DL_BROADCAST_IND primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_BROADCAST_IND B-SAP ETS 300 175-4 [4], subclause 8.3.3.1
Service control information
Parameter name Type Comments
cluster_address_list CLUSTER_ADDRESS_LISTETS 300 175-4 [4], subclause 8.3.1
(OCTETSTRING)
message_unit PDU ETS 300 175-4 [4], subclause 8.3.1
extended_message_flag BIT_1 ETS 300 175-4 [4], subclause 8.3.1
(BITSTRING[1])
error_flag BIT_1 ETS 300 175-4 [4], subclause 8.3.1
(BITSTRING[1])

---------------------- Page: 16 ----------------------

SIST ETS 300 497-7 E2:2003
Page 15
ETS 300 497-7: February 1998
Table 15: DL_BROADCAST_REQ primitive
ASP Declaration
ASP NAME PCO TYPE COMMENTS
DL_BROADCAST_REQ B-SAP ETS 300 175-4 [4], subclause 8.3.3.1
Service control information
Parameter name Type Comments
cluster_address_list CLUSTER_ADDRESS_LISTETS 300 175-4 [4], subclause 8.3.1
(OCTETSTRING)
message_unit PDU ETS 300 175-4 [4], subclause 8.3.1
extended_message_flag BIT_1 ETS 300 175-4 [4], subclause 8.3.1
(BITSTRING[1])
4.3 TC execution sequence
The test cases can be executed in any order with no restrictions.
5 Untestable Test Purposes (TP)
This clause gives a list of TP which are not implemented in the ATS (annex A) due to the chosen ATM or
other restrictions.
Table 16: Untestable TP (1)
Test Purpose Reference to ETS 300 497-7
TP/PT/MM/BV/PR-01
TP/PT/IS/BV-01
TP/PT/IS/BV-02
TP/PT/IS/BV-03
TP/PT/IS/BV-04
TP/PT/CL/BV-01
TP/PT/CL/BV-02
TP/PT/CL/BV-03
6 ATS conventions
The ATS conventions are intended to give a better understanding of the ATS but they describe also the
conventions made for the development of the ATS. Thus for any later maintenance purposes or further
development of the ATS the conventions described in this clause shall be considered.
The ATS conventions contain two clauses, the naming conventions and the implementation conventions.
The naming conventions describe the structure of the naming of all ATS elements. The implementation
conventions describe the functional structure of the ATS.
To define the ATS the guidelines of the documents ETS 300 406 [10] and ETR 141 [24] were considered.
6.1 Naming conventions
6.1.1 Declarat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.