ETSI TS 118 125 V2.0.0 (2020-03)

Definition of product profiles (oneM2M TS-0025 version 2.0.0 Release 2A)

DTS/oneM2M-000025v2A

General Information

• Status: Published
• Publication Date: 25-Mar-2020
• Technical Committee: oneM2M - oneM2M
• Current Stage: 12 - Completion
• Completion Date: 26-Mar-2020

Standards Content (Sample)

ETSI TS 118 125 V2.0.0 (2020-03)






TECHNICAL SPECIFICATION
Definition of product profiles
(oneM2M TS-0025 version 2.0.0 Release 2A)

---------------------- Page: 1 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 2 ETSI TS 118 125 V2.0.0 (2020-03)



Reference
DTS/oneM2M-000025v2A
Keywords
interoperability, M2M

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2020.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 3 ETSI TS 118 125 V2.0.0 (2020-03)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definition of terms, symbols and abbreviations . 5
3.1 Terms . 5
3.2 Symbols . 5
3.3 Abbreviations . 5
4 Conventions . 6
5 Product service profiles . 6
5.1 Introduction . 6
5.2 Constrained sensor as ADN. 6
5.2.1 Profile description . 6
5.2.2 Profile usage examples . 6
5.2.3 Fundamental feature sets . 6
5.2.4 Extendable feature sets . 8
5.3 Constrained actuator as ADN . 8
5.3.1 Profile description . 8
5.3.2 Profile usage examples . 8
5.3.3 Fundamental feature sets . 9
5.3.4 Extendable feature sets . 9
5.4 ADN profile 3 . 9
5.4.1 Profile description . 9
5.4.2 Profile usage examples . 9
5.4.3 Fundamental feature sets . 10
5.4.4 Extendable feature sets . 10
5.5 ADN Profile 4 . 11
5.5.1 Profile description . 11
5.5.2 Profile usage examples . 11
5.5.3 Fundamental feature sets . 11
5.5.4 Extendable feature sets . 14
5.6 IN Profile . 14
5.6.1 Profile description . 14
5.6.2 Profile usage examples . 14
5.6.3 Fundamental feature sets . 15
5.6.4 Extendable feature sets . 21
5.7 Constrained actuator as ASN. 24
5.7.1 Profile description . 24
5.7.2 Profile usage examples . 24
5.7.3 Fundamental feature sets . 25
5.7.4 Extendable feature sets . 25
5.8 Gateway as MN . 25
5.8.1 Profile description . 25
5.8.2 Profile usage examples . 25
5.8.3 Fundamental feature sets . 25
5.8.4 Extendable feature sets . 34
Annex A (normative): Mapping of feature to test purposes . 37
History . 45

ETSI

---------------------- Page: 3 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 4 ETSI TS 118 125 V2.0.0 (2020-03)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Partnership Project oneM2M (oneM2M).
ETSI

---------------------- Page: 4 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 5 ETSI TS 118 125 V2.0.0 (2020-03)
1 Scope
The present document specifies the detailed defined product profiles that can be used by manufactures and service
providers where for each dedicated product, one of the defined product profile can be selected. The product profile
would provide guidance to what features will be implemented, what features should be implemented and what features
may be implemented. The present document also describes the test purposes that need to go through if the product need
to be certified.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
Not applicable.
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] oneM2M Drafting Rules.
NOTE: Available at http://www.onem2m.org/images/files/oneM2M-Drafting-Rules.pdf.
[i.2] ETSI TS 118 131: "oneM2M Feature Catalogue (oneM2M TS-0031)".
[i.3] ETSI TS 118 101: "oneM2M; Functional Architecture (oneM2M TS-0001)".
3 Definition of terms, symbols and abbreviations
3.1 Terms
Void
3.2 Symbols
Void.
ETSI

---------------------- Page: 5 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 6 ETSI TS 118 125 V2.0.0 (2020-03)
3.3 Abbreviations
Void.
4 Conventions
The key words "Shall", "Shall not", "May", "Need not", "Should", "Should not" in the present document are to be
interpreted as described in the oneM2M Drafting Rules [i.1].
5 Product service profiles
5.1 Introduction
This clause defines Product Profiles. Product may be Implementations of oneM2M specification. The Implementation is
claimed to comply with one or multiple Product Profiles. Each profile is defined with fundamental feature set and
extendable feature set. Fundamental feature set includes Features that shall be implemented if the Implementation under
test needs to be certified against the profile. Extendable feature set includes features that are recommended to be
implemented for optimization purposes. The features in the extendable feature set may be tested based on the
requirement. The features in this clause are defined in ETSI TS 118 131 [i.2]. Each profile is also composed of a profile
description and a profile example. The profile description is the definition of profile and describes the suitable products
that should comply to this profile. The profile example gives some real market product examples as well as the usage
and scenarios of the product.
Each of the Profile contains the following Features as common Features.
Table 5.1-1: Fundamental feature sets for all Profiles
Function Feature Set Feature Remark
GEN GE/GEN/00001 At least one Support one of the bindings.
GE/GEN/00002 At least one Support one of the serializations.

5.2 Constrained sensor as ADN
5.2.1 Profile description
The profile defines constraint sensor that is powered by battery and intended to be used for years after deployment
without any human interference for maintenance. Therefore, the function of constraint sensor needs to be very limited.
A sensor is intended to be reporting sensed data to the CSE periodically or according to some other period. Every time
the sensor reports data, it sends one message to the CSE. In order to save battery, the sensor can be sleeping before and
after the reporting of sensed data.
For the successful report of data, there is needed some context resource architecture like the AE resource, the container
resource, etc. The resource architecture can be pre-configured in order to minimize the complexity of the constraint
sensor.
5.2.2 Profile usage examples
The profile applies to constraint sensors that report periodically sensed data. Some example of this kind of product
include:
• Electricity, water, gas meters that report consumed amount of electricity, water or gas to the CSE. The meters
are deployed inside houses and are powered by battery.
ETSI

---------------------- Page: 6 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 7 ETSI TS 118 125 V2.0.0 (2020-03)
• Temperature, humidity sensors that are deployed in the open air for environment monitoring. The sensors can
be deployed in places that are hardly reachable for people that the sensor's need to be working without human
inference for years powered with battery.
5.2.3 Fundamental feature sets
For constrained sensors, the features in the fundamental feature sets assume that the registration relationship between
the ADN and the registrar CSE has been pre-configured beforehand. The resource has also been
pre-configured and the resource id of the resource was provisioned to the ADN as well. The ADN could
utilize the resource id of the resource to create directly.
Table 5.2.3-1: Fundamental feature sets for constrained sensor as ADN
Function Feature Set Feature Remark
GEN AE/GEN/00001 At least one Support one of the TP/oneM2M/AE/GEN/CRE/001_CSR
format of resource TP/oneM2M/AE/GEN/CRE/001_SPR
identification TP/oneM2M/AE/GEN/CRE/001_ABS
TP/oneM2M/AE/GEN/CRE/002_CSR
TP/oneM2M/AE/GEN/CRE/002_SPR
TP/oneM2M/AE/GEN/CRE/002_ABS
TP/oneM2M/AE/GEN/UPD/001_CSR
TP/oneM2M/AE/GEN/UPD/001_SPR
TP/oneM2M/AE/GEN/UPD/001_ABS
TP/oneM2M/AE/GEN/UPD/002_CSR
TP/oneM2M/AE/GEN/UPD/002_SPR
TP/oneM2M/AE/GEN/UPD/002_ABS
TP/oneM2M/AE/GEN/RET/001_CSR
TP/oneM2M/AE/GEN/RET/001_SPR
TP/oneM2M/AE/GEN/RET/001_ABS
TP/oneM2M/AE/GEN/RET/002_CSR
TP/oneM2M/AE/GEN/RET/002_SPR
TP/oneM2M/AE/GEN/RET/002_ABS
TP/oneM2M/AE/GEN/DEL/001_CSR
TP/oneM2M/AE/GEN/DEL/001_SPR
TP/oneM2M/AE/GEN/DEL/001_ABS
TP/oneM2M/AE/GEN/DEL/002_CSR
TP/oneM2M/AE/GEN/DEL/002_SPR
TP/oneM2M/AE/GEN/DEL/002_ABS
AE/GEN/00002 AE/GEN/00002/00001 Support create request TP/oneM2M/AE/DMR/CRE/001
DMR AE/DMR/00002 AE/DMR/00002/00001 Support create TP/oneM2M/AE/DMR/CRE/002
contentInstance

ETSI

---------------------- Page: 7 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 8 ETSI TS 118 125 V2.0.0 (2020-03)
5.2.4 Extendable feature sets
Table 5.2.4-1: Extendable feature sets for constrained sensor as ADN
Function Feature Set Feature Remark
REG AE/REG/00002 AE/REG/00002/00001 Create TP/oneM2M/AE/REG//CRE/001
TP/oneM2M/AE/REG/CRE/002_RR
AE/GEN/00003/00001 Create with TP/oneM2M/AE/REG/CRE/002_RN
resourceName
AE/GEN/00003/00002 Create with TP/oneM2M/AE/REG/CRE/002_ET
expirationTime
AE/DIS/00001/00017 Create with TP/oneM2M/AE/REG/CRE/002_LBL
labels
AE/REG/00002/00002 Create with TP/oneM2M/AE/REG/CRE/002_APN
applicationName
DMR AE/DMR/00001 AE/DMR/00001/00001 Create TP/oneM2M/AE/DMR/CRE/001
with no attribute set
AE/GEN/00003/00001 Create TP/oneM2M/AE/DMR/CRE/004_RN
with resourceName
AE/GEN/00003/00002 Create TP/oneM2M/AE/DMR/CRE/004_ET
expirationTime
with
AE/DIS/00001/00017 Create TP/oneM2M/AE/DMR/CRE/004_LBL
with labels
AE/DMR/00001/00002 Create TP/oneM2M/AE/DMR/CRE/004_MNI
with
maxNrOfInstances
AE/DMR/00001/00003 Create TP/oneM2M/AE/DMR/CRE/004_MBS
with maxByteSize
AE/DMR/00001/00004 Create TP/oneM2M/AE/DMR/CRE/004_MIA
with
maxInstanceAge
AE/DMR/00002 AE/GEN/00003/00001 Create TP/oneM2M/AE/DMR/CRE/003_RN

with resourceName
AE/GEN/00003/00002 Create TP/oneM2M/AE/DMR/CRE/003_ET

with expirationTime
AE/DIS/00001/00017 Create TP/oneM2M/AE/DMR/CRE/003_LBL

with labels
AE/DMR/00002/00002 Create TP/oneM2M/AE/DMR/CRE/003_CNF

with contentInfo

5.3 Constrained actuator as ADN
5.3.1 Profile description
The profile defines constraint actuator that is powered by battery and intended to be used for years after deployment
without any human interference for maintenance. Therefore, the function of constraint actuator needs to be very limited.
An actuator is intended to be receiving control command from CSE via notification or other means. The actuator then
actuates according to the control command.
The actuator needs to receive control command. As a result, the actuator needs to be request reachable to receive
notification or be able to start a polling channel.
5.3.2 Profile usage examples
Switches deployed along the street light to switch on or off the street light remotely.
ETSI

---------------------- Page: 8 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 9 ETSI TS 118 125 V2.0.0 (2020-03)
5.3.3 Fundamental feature sets
Table 5.3.3-1: Fundamental feature sets for constrained sensor as ADN
Function Feature Set Feature Remark
GEN AE/GEN/00001 At least one Resource identifiers TP/oneM2M/AE/GEN/CRE/001_CSR
TP/oneM2M/AE/GEN/CRE/001_SPR
TP/oneM2M/AE/GEN/CRE/001_ABS
TP/oneM2M/AE/GEN/CRE/002_CSR
TP/oneM2M/AE/GEN/CRE/002_SPR
TP/oneM2M/AE/GEN/CRE/002_ABS
TP/oneM2M/AE/GEN/UPD/001_CSR
TP/oneM2M/AE/GEN/UPD/001_SPR
TP/oneM2M/AE/GEN/UPD/001_ABS
TP/oneM2M/AE/GEN/UPD/002_CSR
TP/oneM2M/AE/GEN/UPD/002_SPR
TP/oneM2M/AE/GEN/UPD/002_ABS
TP/oneM2M/AE/GEN/RET/001_CSR
TP/oneM2M/AE/GEN/RET/001_SPR
TP/oneM2M/AE/GEN/RET/001_ABS
TP/oneM2M/AE/GEN/RET/002_CSR
TP/oneM2M/AE/GEN/RET/002_SPR
TP/oneM2M/AE/GEN/RET/002_ABS
TP/oneM2M/AE/GEN/DEL/001_CSR
TP/oneM2M/AE/GEN/DEL/001_SPR
TP/oneM2M/AE/GEN/DEL/001_ABS
TP/oneM2M/AE/GEN/DEL/002_CSR
TP/oneM2M/AE/GEN/DEL/002_SPR
TP/oneM2M/AE/GEN/DEL/002_ABS
GEN AE/GEN/00002 AE/GEN/00002/00001 Support Create TP/oneM2M/AE/DMR/CRE/001
request targeting one
resource
REG AE/REG/00002 AE/REG/00002/00001 Create with TP/oneM2M/AE/REG//CRE/001
mandatory TP/oneM2M/AE/REG/CRE/002_RR
attributes[2]
REG AE/REG/00002 AE/REG/00002/00003 Create with TP/oneM2M/AE/REG/CRE/002_POA
pointOfAccess
SUB AE/SUB/00001 AE/SUB/00001/00001 Create TP/oneM2M/AE/SUB/CRE/001
with
mandatory
attributes[2]

5.3.4 Extendable feature sets
Void.
5.4 ADN profile 3
5.4.1 Profile description
This profile defines features for normal sensor devices or software components that desire to implement oneM2M
sensing services. The sensing services such as monitoring temperature, detecting illumination, collection of location
information, etc. are characterized with collecting and uploading measurement data into a destination e.g. a repository.
The scope of normal sensor devices cover those that are powered by electricity power or by battery that can be easily
changed when the battery is off and have rich resources compared to resource-constraint sensor devices.
The sensing service profile defines a set of features required to implement sensing functionalities including creation and
update of , creation of , etc.
ETSI

---------------------- Page: 9 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 10 ETSI TS 118 125 V2.0.0 (2020-03)
5.4.2 Profile usage examples
This profile applies to normal sensors deployed in non-critical environments have relative rich resources and are
powered by electricity power or by battery that can be easily changed. This profile can also apply to software
components that implements sensing services.
Taking smart socket as an example, when a manufacturer-A decides to design a smart socket with oneM2M sensing
service, he can refer to the Sensing Service Profile to check the fundamental features that are required to implement.
The fundamental features for Sensing Service Profile are defined in clause 5.4.3. When another manufacturer-B also
designs a smart socket complying with the Sensing Service Profile, these two smart sockets produced from two
different manufacturers are interoperable potentially to work together to implement complex tasks.
5.4.3 Fundamental feature sets
Container is used for storing the measurements of sensing device and whenever there is data measured from the sensing
device, the data will be sent to the CSE for storage by sending a create request from the originator
where the encoded measurement is included within the payload of the create request.
oneM2M sensing service profile consists of minimum features to implement Data Management for Container and
ContentInstance functionality shown in table 5.4.3-1.
Table 5.4.3-1: Fundamental feature set for ADN profile 3
Function Feature Set Feature Remark
GEN AE/GEN/00001 At least one Support one of the TP/oneM2M/AE/GEN/CRE/001_CSR
format of resource TP/oneM2M/AE/GEN/CRE/001_SPR
identification TP/oneM2M/AE/GEN/CRE/001_ABS
TP/oneM2M/AE/GEN/CRE/002_CSR
TP/oneM2M/AE/GEN/CRE/002_SPR
TP/oneM2M/AE/GEN/CRE/002_ABS
TP/oneM2M/AE/GEN/UPD/001_CSR
TP/oneM2M/AE/GEN/UPD/001_SPR
TP/oneM2M/AE/GEN/UPD/001_ABS
TP/oneM2M/AE/GEN/UPD/002_CSR
TP/oneM2M/AE/GEN/UPD/002_SPR
TP/oneM2M/AE/GEN/UPD/002_ABS
TP/oneM2M/AE/GEN/RET/001_CSR
TP/oneM2M/AE/GEN/RET/001_SPR
TP/oneM2M/AE/GEN/RET/001_ABS
TP/oneM2M/AE/GEN/RET/002_CSR
TP/oneM2M/AE/GEN/RET/002_SPR
TP/oneM2M/AE/GEN/RET/002_ABS
TP/oneM2M/AE/GEN/DEL/001_CSR
TP/oneM2M/AE/GEN/DEL/001_SPR
TP/oneM2M/AE/GEN/DEL/001_ABS
TP/oneM2M/AE/GEN/DEL/002_CSR
TP/oneM2M/AE/GEN/DEL/002_SPR
TP/oneM2M/AE/GEN/DEL/002_ABS
AE/GEN/00002 AE/GEN/00002/00001 Support Create TP/oneM2M/AE/DMR/CRE/001
request targeting one
resource
REG AE/REG/00002 AE/REG/00002/00001 Create with TP/oneM2M/AE/REG//CRE/001
mandatory attributes TP/oneM2M/AE/REG/CRE/002_RR
DMR AE/DMR/00001 AE/DMR/00001/00001 Create TP/oneM2M/AE/DMR/CRE/001
with no attribute set
AE/DMR/00002 AE/DMR/00002/00001 Create TP/oneM2M/AE/DMR/CRE/002

with mandatory
attributes

5.4.4 Extendable feature sets
Void.
ETSI

---------------------- Page: 10 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 11 ETSI TS 118 125 V2.0.0 (2020-03)
5.5 ADN Profile 4
5.5.1 Profile description
oneM2M provides several logical entity concepts called 'Node' to explain oneM2M Architecture in ETSI
TS 118 101 [i.3]. And from the descriptions about the node types, it indicates some examples that particular node could
match with physical oneM2M devices (e.g. ADN -> constraintedconstrained oneM2M Device). But for the oneM2M
device developers, more detail information may require to design and implement physical devices.
This ADN Profile 4 defines set of common features which could be used for small originator device types of oneM2M
services.
5.5.2 Profile usage examples
ADN Profile 1 could be the basic profile of oneM2M devices like sensor, actuator, etc. And also this profile could be
used independently when developers want to implement oneM2M devices with special functions.
5.5.3 Fundamental feature sets
Table 5.5.3-1: Feature set for ADN Profile 4
Function Feature Set Feature Remark
GEN AE/GEN/00001 At least one Support one of the TP/oneM2M/AE/GEN/CRE/001_CSR
format of resource TP/oneM2M/AE/GEN/CRE/001_SPR
identification TP/oneM2M/AE/GEN/CRE/001_ABS
TP/oneM2M/AE/GEN/CRE/002_CSR
TP/oneM2M/AE/GEN/CRE/002_SPR
TP/oneM2M/AE/GEN/CRE/002_ABS
TP/oneM2M/AE/GEN/UPD/001_CSR
TP/oneM2M/AE/GEN/UPD/001_SPR
TP/oneM2M/AE/GEN/UPD/001_ABS
TP/oneM2M/AE/GEN/UPD/002_CSR
TP/oneM2M/AE/GEN/UPD/002_SPR
TP/oneM2M/AE/GEN/UPD/002_ABS
TP/oneM2M/AE/GEN/RET/001_CSR
TP/oneM2M/AE/GEN/RET/001_SPR
TP/oneM2M/AE/GEN/RET/001_ABS
TP/oneM2M/AE/GEN/RET/002_CSR
TP/oneM2M/AE/GEN/RET/002_SPR
TP/oneM2M/AE/GEN/RET/002_ABS
TP/oneM2M/AE/GEN/DEL/001_CSR
TP/oneM2M/AE/GEN/DEL/001_SPR
TP/oneM2M/AE/GEN/DEL/001_ABS
TP/oneM2M/AE/GEN/DEL/002_CSR
TP/oneM2M/AE/GEN/DEL/002_SPR
TP/oneM2M/AE/GEN/DEL/002_ABS
AE/GEN/00002 AE/GEN/00002/00001 Support Create TP/oneM2M/AE/DMR/CRE/001
request targeting one
resource
AE/GEN/00002/00002 Support Retrieve TP/oneM2M/AE/DMR/RET/001_CB
request targeting one TP/oneM2M/AE/DMR/RET/001_AE
resource TP/oneM2M/AE/DMR/RET/001_CNT
AE/GEN/00002/00003 Support Update TP/oneM2M/AE/DMR/UPD/002_LBL
request targeting one
resource
AE/GEN/00002/00004 Support Delete TP/oneM2M/AE/DMR/DEL/003
request targeting one
resource
ETSI

---------------------- Page: 11 ----------------------
oneM2M TS-0025 version 2.0.0 Release 2A 12 ETSI TS 118 125 V2.0.0 (2020-03)
Function Feature Set Feature Remark
REG AE/REG/00001 AE/REG/00001/00001 The Retrieval of TP/oneM2M/AE/DMR/RET/001_CB
resource
AE/REG/00002 AE/REG/00002/00001 Create with TP/oneM2M/AE/REG//CRE/001
mandatory attributes TP/oneM2M/AE/REG/CRE/002_RR
AE/GEN/00003/00001 Create with TP/oneM2M/AE/REG/CR
...