ETSI EN 300 195-3 V1.3.3 (2000-05)
Integrated Services Digital Network (ISDN); Supplementary service interactions; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
Integrated Services Digital Network (ISDN); Supplementary service interactions; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user
REN/SPS-05138-3
Digitalno omrežje z integriranimi storitvami (ISDN) - Medsebojno vplivanje dopolnilne storitve - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - 3. del: Zgradba preskušalnega niza in nameni preskušanja (TSS&TP) - Specifikacija za uporabnika
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2005
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL ,6'1 0HGVHERMQRYSOLYDQMH
GRSROQLOQHVWRULWYH3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW '66
GHO =JUDGEDSUHVNXãDOQHJDQL]DLQQDPHQLSUHVNXãDQMD 766 73 6SHFLILNDFLMD
]DXSRUDEQLND
Integrated Services Digital Network (ISDN); Supplementary service interactions; Digital
Subscriber Signalling System No. one (DSS1) protocol; Part 3: Test Suite Structure and
Test Purposes (TSS&TP) specification for the user
Ta slovenski standard je istoveten z: EN 300 195-3 Version 1.3.3
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
European Standard (Telecommunications series)
Integrated Services Digital Network (ISDN);
Supplementary service interactions;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 3: Test Suite Structure and Test Purposes (TSS&TP)
specification for the user
2 ETSI EN 300 195-3 V1.3.3 (2000-05)
Reference
REN/SPS-05138-3
Keywords
DSS1, interaction, ISDN, supplementary service,
testing, TSS&TP, user
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:+33492944200 Fax:+33493654716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network
drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI
3 ETSI EN 300 195-3 V1.3.3 (2000-05)
Contents
Intellectual Property Rights.6
Foreword .6
1 Scope.7
2 References.7
3 Definitions and abbreviations .8
3.1 Definitions.8
3.1.1 Definitions related to conformance testing .8
3.1.2 Definitions related to EN 300 195-1.8
3.2 Abbreviations .9
4 Test Suite Structure (TSS) .10
4.1 Two-level structure of the test suite.10
4.2 Level 1: interaction case (test purpose group).10
4.3 Level 2: substructure of an interaction case (test purpose subgroup) .12
5 Test Purposes (TP).12
5.1 Introduction .12
5.1.1 TP naming convention .12
5.1.2 Source of TP definition.13
5.1.3 TP structure.13
5.1.4 Test strategy.13
5.2 User TPs for SSI.14
5.2.1 Interaction between AOC-D and AOC-E.14
5.2.2 Interaction between AOC and ECT .14
5.2.2.1 Test suite substructure.14
5.2.2.2 Identification of charge invocation (S/T reference point) .14
5.2.2.3 Identification of charge invocation (S/T or T reference point).15
5.2.3 Interaction between AOC and CCBS.16
5.2.3.1 Test suite substructure.16
5.2.3.2 Repeating AOC request (T ref. point) .16
5.2.4 Interaction between AOC-E and CD.16
5.2.4.1 Test suite substructure.17
5.2.4.2 CD provided at S/T ref. point.17
5.2.4.2.1 Identification of charge invocation .17
5.2.4.3 CD provided at T ref. point.18
5.2.4.3.1 Identification of charge invocation .18
5.2.4.4 Partial re-routeing provided (T ref. point).18
5.2.4.4.1 Identification of charge invocation .18
5.2.5 Interaction between AOC-E and CFB.19
5.2.5.1 Test suite substructure.19
5.2.5.2 Identification of charge invoked in partial re-routeing request .20
5.2.6 Interaction between AOC-E and CFNR.20
5.2.6.1 Test suite substructure.20
5.2.6.2 Identification of charge invoked in partial re-routeing request .21
5.2.7 Interaction between AOC-E and CFU .21
5.2.7.1 Test suite substructure.21
5.2.7.2 Identification of charge invoked in partial re-routeing request .22
5.2.8 Interaction between AOC and 3PTY .22
5.2.9 Interaction between AOC and CONF .23
5.2.9.1 Test suite substructure.23
5.2.9.2 Begin conference from U10 .23
5.2.10 Interaction between AOC and TP .23
5.2.11 Interaction between CONF and HOLD.23
5.2.11.1 Test suite substructure.24
5.2.11.2 Identify remote user who sends a notification .24
ETSI
4 ETSI EN 300 195-3 V1.3.3 (2000-05)
5.2.12 Interaction between CONF and CUG supplementary service.24
5.2.13 Interaction between CONF and CONF .24
5.2.13.1 Test suite substructure.24
5.2.13.2 Identify remote user who sends a notification .25
5.2.14 Interaction between CONF and TP.25
5.2.14.1 Test suite substructure.25
5.2.14.2 Identify remote user who sends a notification to conference.25
5.2.15 Interaction between CONF and 3PTY.25
5.2.15.1 Test suite substructure.25
5.2.15.2 Identify remote user who sends a notification to conference.26
5.2.16 Interaction between CONF and UUS service 3 .26
5.2.16.1 Test suite substructure.26
5.2.16.2 CONF controlling user sends UUS3 info to single party .26
5.2.16.3 CONF controlling user broadcasts UUS3 info .26
5.2.16.4 CONF remote user sends UUS3 info .26
5.2.17 Interaction between CONF and ECT .27
5.2.17.1 Test suite substructure.27
5.2.17.2 CONF remote user uses ECT .27
5.2.18 Interaction between CD and COLP.27
5.2.19 Interaction between CD and COLR .27
5.2.20 Interaction between CD and UUS.28
5.2.20.1 Test suite substructure.28
5.2.20.2 Deflection after alerting (S/T or T ref. point).28
5.2.20.2.1 UUS1 explicit service.28
5.2.20.3 Partial re-routeing (T ref. point).28
5.2.21 Interaction between CFB and COLP.29
5.2.22 Interaction between CFB and COLR .29
5.2.23 Interaction between CFB and UUS.30
5.2.23.1 Test suite substructure.30
5.2.23.2 Partial re-routeing (T ref. point).30
5.2.24 Interaction between CFNR and COLP.31
5.2.25 Interaction between CFNR and COLR .31
5.2.26 Interaction between CFNR and UUS.31
5.2.26.1 Test suite substructure.32
5.2.26.2 Partial re-routeing (T ref. point).32
5.2.27 Interaction between CFU and COLP .33
5.2.28 Interaction between CFU and COLR.33
5.2.29 Interaction between CFU and UUS.33
5.2.29.1 Test suite substructure.34
5.2.29.2 Partial re-routeing (T ref. point).34
5.2.30 Interaction between TP and 3PTY.35
5.2.31 Interaction between HOLD and TP .35
5.2.32 Interaction between HOLD and 3PTY.35
5.2.32.1 Test suite substructure.36
5.2.32.2 Holding a 3PTY call .36
5.2.32.3 Retrieving a 3PTY call.36
5.2.33 Interaction between CUG and 3PTY .36
5.2.34 Interaction between ECT and MCID .36
5.2.35 Interaction between ECT and 3PTY.37
5.2.36 Interaction between ECT and UUS.37
5.2.37 Interaction between CCBS and UUS .37
5.2.37.1 Test suite substructure.37
5.2.37.2 Requesting UUS in a CCBS call request (S/T ref. Point).37
5.2.37.3 Requesting UUS in a CCBS call request (T ref. Point).38
5.2.38 Interaction between CCBS and CLIP .38
5.2.39 Interaction between CCBS and CLIR .38
5.2.40 Interaction between CCBS and CUG.38
5.2.40.1 Test suite substructure.39
5.2.40.2 Redefining the CUG requirement (S/T ref. point).39
5.2.40.3 Originating T reference point.39
ETSI
5 ETSI EN 300 195-3 V1.3.3 (2000-05)
5.2.41 Interaction between CCBS and MSN .39
5.2.41.1 Test suite substructure.39
5.2.41.2 CCBS interrogation related to specific multiple subscriber numbers.40
5.2.42 Interaction between CCBS and SUB .40
5.2.43 Interaction between FPH and COLP.40
5.2.44 Interaction between ECT and CUG .40
5.2.45 Interaction between ECT and TP.40
5.2.46 Interaction between CONF and MCID .40
5.2.47 Interaction between CCBS and CW.40
5.2.48 Interaction between UUS and TP .40
5.2.49 Interaction between MWI and MSN.40
5.2.49.1 Test suite substructure.41
5.2.49.2 Controlling user.41
5.2.50 Interaction between OCB and CCBS.41
5.2.50.1 Test suite substructure.42
5.2.50.2 Redefining the OCB-UC requirement (S/T ref. point) .42
5.2.50.3 Originating T reference point.42
5.2.51 Interaction between OCB and MSN .42
5.2.52 Interaction between OCB and CFB .42
5.2.53 Interaction between OCB and CFNR.42
5.2.54 Interaction between OCB and CFU .42
5.2.55 Interaction between OCB and CD .43
5.2.56 Interaction between OCB-UC and OCB-F.43
5.2.57 Interaction between CCNR and AOC .43
5.2.57.1 Test suite substructure.43
5.2.57.2 Repeating AOC request (T ref. point) .43
5.2.58 Interaction between CCNR and CW .43
5.2.59 Interaction between CCNR and CLIP.43
5.2.60 Interaction between CCNR and CLIR .43
5.2.61 Interaction between CCNR and CUG .43
5.2.61.1 Test suite substructure.44
5.2.61.2 Redefining the CUG requirement (S/T ref. point).44
5.2.61.3 Originating T reference point.44
5.2.62 Interaction between CCNR and CCBS .44
5.2.63 Interaction between CCNR and MSN.44
5.2.63.1 Test suite substructure.45
5.2.63.2 CCNR interrogation related to specific multiple subscriber numbers .45
5.2.64 Interaction between CCNR and SUB.45
5.2.65 Interaction between CCNR and UUS .45
5.2.65.1 Test suite substructure.45
5.2.65.2 Requesting UUS in a CCNR call request (S/T ref. Point).45
5.2.65.3 Requesting UUS in a CCNR call request (T ref. Point) .46
5.2.66 Interaction between CCNR and OCB .47
5.2.66.1 Test suite substructure.47
5.2.66.2 Redefining the OCB-UC requirement (S/T ref. point) .47
5.2.66.3 Originating T reference point.47
5.2.67 Interaction between OCB and SCF.47
5.2.68 Interaction between CW and CFNR/CD.48
6 Compliance .48
7 Requirements for a comprehensive testing service.48
History.49
ETSI
6 ETSI EN 300 195-3 V1.3.3 (2000-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server
(http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)
which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services and
Protocols for Advanced Networks (SPAN).
The present document is part 3 of a multi-part EN covering the Integrated Services Digital Network (ISDN);
Supplementary service interactions; Digital Subscriber Signalling System No. one (DSS1) protocol, as identified below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma for the user";
Part 5: "Test Suite Structure and Test Purposes (TSS&TP) specification for the network";
Part 6: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
proforma for the network".
National transposition dates
Date of adoption of this EN: 28 April 2000
Date of latest announcement of this EN (doa): 31 July 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2001
Date of withdrawal of any conflicting National Standard (dow): 31 January 2001
ETSI
7 ETSI EN 300 195-3 V1.3.3 (2000-05)
1 Scope
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for the User side of the
T reference point or coincident S and T reference point (as defined in ITU-T Recommendation I.411 [12]) of
implementations conforming to the stage three standard for supplementary service interactions for the pan-European
Integrated Services Digital Network (ISDN) by means of the Digital Subscriber Signalling System No. one (DSS1)
protocol, EN 300 195-1 [2].
A further part of EN 300 195 specifies the Abstract Test Suite (ATS) and partial PIXIT proforma based on the present
document. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for the Network side of the T
reference point or coincident S and T reference point of implementations conforming to EN 300 195-1 [2].
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI EN 300 403-1: "Integrated Services Digital Network (ISDN); Digital Subscriber Signalling
System No. one (DSS1) protocol; Signalling network layer for circuit-mode basic call control;
Part 1: Protocol specification [ITU-T Recommendation Q.931 (1993), modified]".
[2] ETSI EN 300 195-1 (V1.4): "Integrated Services Digital Network (ISDN); Supplementary service
interactions; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1: Protocol
specification".
[3] ETSI EN 300 195-2 (V1.3): "Integrated Services Digital Network (ISDN); Supplementary service
interactions; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol
Implementation Conformance Statement (PICS) proforma specification".
[4] ETSI EN 300 196-1: "Integrated Services Digital Network (ISDN); Generic functional protocol for
the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1)
protocol; Part 1: Protocol specification".
[5] ETSI EN 300 207-1 (V1.2): "Integrated Services Digital Network (ISDN); Diversion
supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 1:
Protocol specification".
[6] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[7] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite specification".
[8] ISO/IEC 9646-3: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 3: The Tree and Tabular Combined Notation (TTCN)".
[9] ITU-T Recommendation E.164 (1997): "The international public telecommunication numbering
plan".
[10] ITU-T Recommendation I.112 (1993): "Vocabulary of terms for ISDNs".
ETSI
8 ETSI EN 300 195-3 V1.3.3 (2000-05)
[11] ITU-T Recommendation I.210 (1993): "Principles of telecommunication services supported by an
ISDN and the means to describe them".
[12] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -Reference configurations".
[13] ETSI ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
3.1.1 Definitions related to conformance testing
abstract test case: refer to ISO/IEC 9646-1 [6].
Abstract Test Suite (ATS): refer to ISO/IEC 9646-1 [6].
Implementation Under Test (IUT): refer to ISO/IEC 9646-1 [6].
implicit send event: refer to ISO/IEC 9646-3 [8].
lower tester: refer to ISO/IEC 9646-1 [6].
point of control and observation: refer to ISO/IEC 9646-1 [6].
Protocol Implementation Conformance Statement (PICS): refer to ISO/IEC 9646-1 [6].
PICS proforma: refer to ISO/IEC 9646-1 [6].
Protocol Implementation eXtra Information for Testing (PIXIT): refer to ISO/IEC 9646-1 [6].
PIXIT proforma: refer to ISO/IEC 9646-1 [6].
system under test: refer to ISO/IEC 9646-1 [6].
Test Purpose (TP): refer to ISO/IEC 9646-1 [6].
3.1.2 Definitions related to EN 300 195-1
call held auxiliary state: see EN 300 196-1 [4], subclause 7.1.2.
call reference: see EN 300 403-1 [1], subclause 4.3.
component: see EN 300 196-1 [4], subclause 11.2.2.1.
idle auxiliary state: see EN 300 196-1 [4], subclause 7.1.2.
Integrated Services Digital Network (ISDN): see ITU-T Recommendation I.112 [10], definition 308.
ISDN number: number conforming to the numbering and structure specified in ITU-T Recommendation E.164 [9].
invoke component: see EN 300 196-1 [4], subclause 11.2.2.1.
return error component: see EN 300 196-1 [4], subclause 11.2.2.1.
return result component: see EN 300 196-1 [4], subclause 11.2.2.1.
served user: served user is the user who invokes the supplementary service.
ETSI
9 ETSI EN 300 195-3 V1.3.3 (2000-05)
service; telecommunication service: see ITU-T Recommendation I.112 [10], definition 201.
supplementary service: see ITU-T Recommendation I.210 [11], subclause 2.4.
user: DSS1 protocol entity at the User side of the user-network interface where a T reference point or coincident S and
T reference point applies.
user (S/T): DSS1 protocol entity at the User side of the user-network interface where a coincident S and T reference
point applies.
user (T): DSS1 protocol entity at the User side of the user-network interface where a T reference point applies (User is
a Private ISDN).
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
3PTY Three-Party
AOC Advice of Charge
AOC-D Advice of Charge During the call
AOC-E Advice of Charge at the End of the call
AOC-S Advice of Charge at call Set-up time
CCBS Completion of Calls to Busy Subscriber
CCNR Completion of Calls on No Reply
CD Call Deflection
CFB Call Forwarding Busy
CFNR Call Forwarding on No Reply
CFU Call Forwarding Unconditional
CLIP Calling Line Identification Presentation
CLIR Calling Line Identification Restriction
COLP Connected Line Identification Presentation
COLR Connected Line Identification Restriction
CONF Conference call, add-on
CUG Closed User Group
CW Call Waiting
ECT Explicit Call Transfer
FPH Freephone
HOLD Call Hold
IUT Implementation Under Test
MCID Malicious Call Identification
MSN Multiple Subscriber Number
MWI Message Waiting Indication
OCB Outgoing Call Barring
OCB-F Outgoing Call Barring: Fixed
OCB-UC Outgoing Call Barring: User Controlled
SCF Selective Call Forwarding
SSI Supplementary Service Interactions
SUB Subaddressing
TP Terminal Portability
TP Test Purpose
TSS Test Suite Structure
U00 Null call state
U01 Call Initiated call state
U02 Overlap Sending call state
U03 Outgoing Call Proceeding call state
U04 Call Delivered call state
U06 Call Present call state
U07 Call Received call state
U09 Incoming Call Proceeding call state
U10 Active Call state
U11 Disconnect Request call state
ETSI
10 ETSI EN 300 195-3 V1.3.3 (2000-05)
U15 Suspend Request call state
U17 Resume Request call state
U25 Overlap Receiving call state
U31 Bearer Independent Transport call state
UUI User-to-User Information
UUS User-to-User Signalling
4 Test Suite Structure (TSS)
4.1 Two-level structure of the test suite
The supplementary service interaction protocol is structured in two levels. The first level corresponds to a specific case
of interaction between two supplementary services. The second level corresponds to the way in which a specific case is
substructured. This two-level structure is reflected in the present document.
4.2 Level 1: interaction case (test purpose group)
The interaction cases correspond to subclauses 5.1 to 5.68 of EN 300 195-1 [2]. They are depicted in figure 1 and
table 1. Test purposes for the general procedures specified in clause 6 of EN 300 195-1 [2] are included in the groups
corresponding to the interaction cases for which they apply.
NOTE: TPs corresponding to subclause 6.1.2 of EN 300 195-1 [2] are in groups 02 (AOC and ECT) and
04 (AOC and CD). No TPs have been defined for the remainder of clause 6.
SSI-User
Interaction between
AOC-D and AOC and ECT AOC and . . . CW and
AOC-E (02) CCBS CFNR/CD(68)
(01) (03)
NOTE: Numbers in brackets represent group numbers and are used in TP identifiers.
Figure 1: Test suite structure - level 1
ETSI
11 ETSI EN 300 195-3 V1.3.3 (2000-05)
Table 1: Group numbers - level 1
Group Interaction between:
01 the AOC-D and AOC-E supplementary services
02 the AOC and ECT supplementary services
03 the AOC and CCBS supplementary services
04 the AOC-E and CD supplementary services
05 the AOC-E and CFB supplementary services
06 the AOC-E and CFNR supplementary services
07 the AOC-E and CFU supplementary services
08 the AOC and 3PTY supplementary services
09 the AOC and CONF supplementary services
10 the AOC and Terminal Portability supplementary services
11 the CONF and HOLD supplementary services
12 the CONF and CUG supplementary service
13 the CONF and CONF supplementary services
14 the CONF and Terminal Portability supplementary services
15 the CONF and 3PTY supplementary services
16 the CONF and UUS3 supplementary services
17 the CONF and ECT supplementary services
18 the CD and COLP supplementary services
19 the CD and COLR supplementary services
20 the CD and UUS supplementary services
21 the CFB and COLP supplementary services
22 the CFB and COLR supplementary services
23 the CFB and UUS supplementary services
24 the CFNR and COLP supplementary services
25 the CFNR and COLR supplementary services
26 the CFNR and UUS supplementary services
27 the CFU and COLP supplementary services
28 the CFU and COLR supplementary services
29 the CFU and UUS supplementary services
30 the Terminal Portability and 3PTY supplementary services
31 the HOLD and Terminal Portability supplementary services
32 the HOLD and 3PTY supplementary services
33 the CUG and 3PTY supplementary services
34 the ECT and MCID supplementary services
35 the ECT and 3PTY supplementary services
36 the ECT and UUS supplementary services
37 the CCBS and UUS supplementary services
38 the CCBS and CLIP supplementary services
39 the CCBS and CLIR supplementary services
40 the CCBS and CUG supplementary services
41 the CCBS and MSN supplementary services
42 the CCBS and SUB supplementary services
43 the FPH and COLP supplementary services
44 the ECT and CUG supplementary services
45 the ECT and Terminal Portability supplementary services
46 the CONF and MCID supplementary services
47 the CCBS and CW supplementary services
48 the UUS and Terminal Portability supplementary services
49 the MWI and MSN supplementary services
50 the OCB and CCBS supplementary services
51 the OCB and MSN supplementary services
52 the OCB and CFB supplementary services
53 the OCB and CFNR supplementary services
54 the OCB and CFU supplementary services
55 the OCB and CD supplementary services
56 the OCB-UC and OCB-F supplementary services
57 the CCNR and AOC supplementary services
58 the CCNR and CW supplementary services
59 the CCNR and CLIP supplementary services
60 the CCNR and CLIR supplementary services
61 the CCNR and CUG supplementary services
62 the CCNR and CCBS supplementary services
ETSI
12 ETSI EN 300 195-3 V1.3.3 (2000-05)
Group Interaction between:
63 the CCNR and MSN supplementary services
64 the CCNR and SUB supplementary services
65 the CCNR and UUS supplementary services
66 the CCNR and OCB supplementary services
67 the OCB and SCF supplementary services
68 the CW and CFNR/CD supplementary services
4.3 Level 2: substructure of an interaction case (test purpose
subgroup)
The specific substructure of each interaction case is depicted in the corresponding subclause of clause 5. An example of
a possible substructure is given in figure 2 for illustrative purposes. In the root node "SSI - Uxx", the symbol "xx" needs
to be replaced by the relevant value of column 1 in table 1.
SSI-Uxx
User (S/T) User (T)
Served user Remote user Served user Remote user
side side side side
Subgroup 1 Subgroup k Subgroup k+1 Subgroup k+n etc.
(01) (.) (.) (.)
NOTE: Numbers in brackets represent subgroup numbers and are used in TP identifiers.
Figure 2: Example of test suite substructure - level 2
Within the group of general procedures, a subgroup is reserved for each individual procedure, starting with subgroup 01.
5 Test Purposes (TP)
5.1 Introduction
For each test requirement a TP is defined.
5.1.1 TP naming convention
TPs are numbered, starting at 001, within each group/subgroup combination. The group/subgroup combinations are
organized according to the TSS described in clause 4. Additional references are added to identify the actual test suite
and whether it applies to the network or the user (see table 2).
ETSI
13 ETSI EN 300 195-3 V1.3.3 (2000-05)
Table 2: TP identifier naming convention scheme
Identifier: ___
= supplementary service: e.g. "SSI"
= type of IUT: U User
NNetwork
= group 2 digit field representing group reference according to TSS
= subgroup 2 digit field representing subgroup reference according to TSS
= sequential number (001-999)
5.1.2 Source of TP definition
The TPs are based on EN 300 195-1 [2], clauses 5 and 6.
5.1.3 TP structure
Each TP has been written in a manner which is consistent with all other TPs. The intention of this is to make the TPs
more readable and checkable. A particular structure has been used and this is illustrated in table 3. This table should be
read in conjunction with any TP, i.e. use a test purpose as an example to fully understand the table.
NOTE: The structuring of TP grouping in two levels (TP group and subgroup) is specific to the present document.
Most other DSS1 TSS&TP standards use only one level of TP grouping.
Table 3: Structure of a single TP
TP part Text Example
Header
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...