ETSI TS 125 302 V8.3.0 (2009-07)

Universal Mobile Telecommunications System (UMTS); Services provided by the physical layer (3GPP TS 25.302 version 8.3.0 Release 8)

RTS/TSGR-0225302v830

General Information

• Status: Published
• Publication Date: 19-Jul-2009
• Technical Committee: 3GPP RAN 2 - Radio layer 2 specification and Radio layer 3 RR specification
• Current Stage: 12 - Completion
• Due Date: 02-Jul-2009
• Completion Date: 20-Jul-2009

Standards Content (Sample)

ETSI TS 125 302 V8.3.0 (2009-07)
Technical Specification


Universal Mobile Telecommunications System (UMTS);
Services provided by the physical layer
(3GPP TS 25.302 version 8.3.0 Release 8)

---------------------- Page: 1 ----------------------
3GPP TS 25.302 version 8.3.0 Release 8 1 ETSI TS 125 302 V8.3.0 (2009-07)



Reference
RTS/TSGR-0225302v830
Keywords
UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 25.302 version 8.3.0 Release 8 2 ETSI TS 125 302 V8.3.0 (2009-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 25.302 version 8.3.0 Release 8 3 ETSI TS 125 302 V8.3.0 (2009-07)
Contents
Intellectual Property Rights.2
Foreword.2
Foreword.7
1 Scope.8
2 References.8
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.9
4 Interfaces to the physical layer.10
4.1 Interface to MAC.11
4.2 Interface to RRC.11
5 Services and functions of the physical layer .11
5.1 General.11
5.2 Overview of L1 functions.12
5.3 L1 interactions with L2 retransmission functionality.12
6 Model of physical layer of the UE .13
6.1 Uplink models.13
6.2 Downlink models.17
7 Formats and configurations for L1 data transfer .29
7.1 General concepts about Transport Channels .29
7.1.1 Transport Block.30
7.1.2 Transport Block Set.30
7.1.3 Transport Block Size.30
7.1.4 Transport Block Set Size .30
7.1.5 Transmission Time Interval .30
7.1.6 Transport Format.31
7.1.6a Transport Format for HS-DSCH.32
7.1.7 Transport Format for E-DCH.32
7.1.7a Transport Format Set .33
7.1.8 Transport Format Combination.34
7.1.9 Transport Format Combination Set .34
7.1.10 Transport Format Indicator (TFI) .35
7.1.11 Transport Format Combination Indicator (TFCI).35
7.1.12 Rate matching.35
7.1.13 HARQ information.36
7.1.14 Transport Format and Resource Indication (TFRI) .36
7.1.15 E-DCH Transport Format Combination Indication (E-TFCI) .36
7.2 Types of Transport Channels.36
7.3 Compressed Mode.38
8 UE Simultaneous Physical Channels combinations.39
8.1 FDD Uplink.39
8.2 FDD Downlink.41
8.3 TDD Uplink.45
8.3.1 3.84/7.68 Mcps TDD Uplink .45
8.3.2 1.28 Mcps TDD Uplink .46
8.4 TDD Downlink.48
8.4.1 3.84/7.68 Mcps TDD Downlink .48
8.4.2 1.28 Mcps TDD Downlink .49
8.4.3 3.84 Mcps TDD IMB Downlink.54
9 Measurements provided by the physical layer .54
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 25.302 version 8.3.0 Release 8 4 ETSI TS 125 302 V8.3.0 (2009-07)
9.1 Model of physical layer measurements .55
9.2 UE Measurements.56
9.2.1 SFN-CFN observed time difference .56
9.2.2 Void.56
9.2.3 CPICH E /N .56
c 0
9.2.4 Void.56
9.2.5 CPICH RSCP.56
9.2.6 P-CCPCH RSCP.57
9.2.7 Timeslot ISCP.57
9.2.8 Void.57
9.2.9 SIR.57
9.2.10 UTRA carrier RSSI.57
9.2.11 GSM carrier RSSI.57
9.2.12 Transport channel BLER .58
9.2.13 UE transmitted power .58
9.2.14 UE Rx-Tx time difference .58
9.2.15 SFN-SFN Observed time difference.58
9.2.16 UE GPS Timing of Cell Frames for UE positioning.58
9.2.17 Timing Advance (T ) for 1.28 Mcps TDD.59
ADV
9.2.18 UE GPS code phase .59
9.2.19 UE GANSS Timing of Cell Frames for UE positioning.59
9.2.20 UE GANSS code measurement .59
9.3 UTRAN Measurements.60
9.3.1 Received total wide band power.60
9.3.2 Transmitted carrier power.60
9.3.3 Transmitted code power.60
9.3.4 Void.60
9.3.5 Physical channel BER.60
9.3.6 Transport channel BER.60
9.3.7 RX timing deviation.61
9.3.8 Timeslot ISCP.61
9.3.9 RSCP.61
9.3.10 Round Trip Time.61
9.3.11 Void.61
9.3.12 Acknowledged PRACH preambles.61
9.3.13 Void.61
9.3.14 Void.62
9.3.15 SIR.62
9.3.16 PRACH Propagation Delay .62
9.3.17 UTRAN GPS Timing of Cell Frames for UE positioning .62
9.3.18 SIR ERROR.62
9.3.19 Received SYNC_UL Timing Deviation .62
9.3.20 Cell Sync Burst Timing .63
9.3.21 Cell Sync Burst SIR.63
9.3.22 SFN-SFN Observed time difference.63
9.3.23 Angle of Arrival (AOA) for 1.28 Mcps TDD.63
9.3.24 HS-SICH reception quality.63
9.3.25 Transmitted carrier power of all codes not used for HS-PDSCH or HS-SCCH transmission .64
9.3.26 UpPTS interference (1.28Mcps TDD).64
9.3.27 DL Transmission Branch Load.64
9.3.28 Received scheduled E-DCH power share (RSEPS).65
9.3.29 UTRAN GANSS Timing of Cell Frames for UE positioning .65
9.3.30 Common E-DCH resource usage.65
10 Primitives of the physical layer.66
10.1 Generic names of primitives between layers 1 and 2 .66
10.1.1 PHY-Access-REQ.67
10.1.2 PHY-Access-CNF.67
10.1.3 PHY-Data-REQ.68
10.1.4 PHY-Data-IND.68
10.1.5 Void.68
10.1.6 Void.68
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 25.302 version 8.3.0 Release 8 5 ETSI TS 125 302 V8.3.0 (2009-07)
10.1.7 PHY-Status-IND.68
10.2 Generic names of primitives between layers 1 and 3 .69
10.2.1 STATUS PRIMITIVES.69
10.2.1.1 CPHY-Sync-IND.69
10.2.1.2 CPHY-Out-of-Sync-IND.69
10.2.1.3 CPHY-Measurement-REQ.69
10.2.1.4 CPHY-Measurement-IND.70
10.2.1.5 CPHY-Error-IND.70
10.2.1.6 Void.70
10.2.2 CONTROL PRIMITIVES.70
10.2.2.1 CPHY-TrCH-Config-REQ.70
10.2.2.2 CPHY-TrCH-Config-CNF.70
10.2.2.3 CPHY-TrCH-Release-REQ.71
10.2.2.4 CPHY-TrCH-Release-CNF.71
10.2.2.5 CPHY-RL-Setup-REQ.71
10.2.2.6 CPHY-RL-Setup-CNF.71
10.2.2.7 CPHY-RL-Release-REQ.71
10.2.2.8 CPHY-RL-Release-CNF.71
10.2.2.9 CPHY- RL-Modify-REQ.71
10.2.2.10 CPHY-RL-Modify-CNF .71
10.2.2.11 CPHY-Commit-REQ .72
10.2.2.12 Void.72
10.2.2.13 Void.72
10.2.2.14 Void.72
10.2.2.15 Void.72
10.2.2.16 CPHY-Out-of-Sync-Config-REQ .72
10.2.2.17 CPHY-Out-of-Sync-Config-CNF.72
10.2.2.18 CPHY-MBMS-Config-REQ .72
10.2.2.19 CPHY-MBMS-Config-CNF.72
10.3 Parameter definition.73
10.3.1 Error code .73
10.3.2 Event value.73
10.3.3 Access Information.73
10.3.4 Transport Format Subset.73
10.3.5 Physical channel description.73
10.3.5.1 Primary SCH.73
10.3.5.2 Secondary SCH.73
10.3.5.3 Primary CCPCH.73
10.3.5.4 Secondary CCPCH.74
10.3.5.4a Secondary CCPCH frame type 2.74
10.3.5.5 PRACH.74
10.3.5.6 Uplink DPDCH+DPCCH.75
10.3.5.7 Uplink DPCH.75
10.3.5.8 Downlink DPCH.75
10.3.5.8a F-DPCH (FDD only).76
10.3.5.9 Void.76
10.3.5.10 PICH.76
10.3.5.11 AICH.76
10.3.5.12 Void.76
10.3.5.13 Void.76
10.3.5.14 Void.76
10.3.5.15 Void.76
10.3.5.16 PDSCH (TDD only).77
10.3.5.17 PUSCH.
...