ETSI TS 102 841 V1.1.1 (2010-04)

Digital Enhanced Cordless Telecommunications (DECT); New Generation DECT; Extended wideband speech services; Profile Test Specification (PTS) and Test Case Library (TCL)

DTS/DECT-NG0258

General Information

• Status: Published
• Publication Date: 06-Apr-2010
• Technical Committee: DECT NewGen - DECT NewGeneration
• Current Stage: 12 - Completion
• Due Date: 20-Apr-2010
• Completion Date: 07-Apr-2010

Standards Content (Sample)

ETSI TS 102 841 V1.1.1 (2010-04)
Technical Specification


Digital Enhanced Cordless Telecommunications (DECT);
New Generation DECT;
Extended wideband speech services;
Profile Test Specification (PTS) and Test Case Library (TCL)

---------------------- Page: 1 ----------------------
2 ETSI TS 102 841 V1.1.1 (2010-04)



Reference
DTS/DECT-NG258
Keywords
DECT, testing, codec, GAP, IMT-2000,
interoperability, IP, profile, speech
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2010.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 841 V1.1.1 (2010-04)
Contents
Intellectual Property Rights . 6
Foreword . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Test method . 11
4.1 Test platform . 11
4.1.1 PP test platform . 11
4.1.1.1 List content for tests . 12
4.1.1.1.1 List of supported lists . 12
4.1.1.1.2 Missed calls list . 12
4.1.1.1.3 Outgoing calls list . 12
4.1.1.1.4 Incoming accepted calls list . 13
4.1.1.1.5 All calls list . 13
4.1.1.1.6 Contact list . 15
4.1.1.1.7 Internal names list. 15
4.1.1.1.8 DECT system settings list. 16
4.1.1.1.9 Line settings list . 16
4.1.1.1.10 All incoming calls list . 17
4.1.2 FP test platform . 18
4.1.2.1 List content for tests . 19
4.1.3 NG-DECT PART1 backward compatibility test platform . 19
4.2 Hypothesis . 20
4.3 Test groups . 20
4.3.1 Network features . 20
4.3.2 Application features . 20
5 Test Cases (TCs) . 20
5.1 TC definition conventions . 21
5.2 TC naming conventions . 22
5.3 Portable Part TC purposes . 23
5.3.1 List of New Generation DECT Part 3 PT tests cases related to NG-DECT Part 1 features . 23
5.3.2 List of New Generation DECT Part 3 PT tests cases . 24
5.4 Fixed Part TC purposes . 29
5.4.1 List of New Generation DECT Part 3 FT tests cases related to NG-DECT Part 1 features . 29
5.4.2 List of New Generation DECT Part 3 FT tests cases . 29
6 Portable Part Test specification . 36
6.1 TC_PT_NG1.N.1 Codec negotiation tests cases . 37
6.2 TC_PT_NG1.N.2 Codec switching tests cases. 40
6.3 TC_PT_NG1.N.3 Missed call notification tests cases . 40
6.4 TC_PT_NG1.N.4 Voice message waiting notification tests cases . 41
6.5 TC_PT_NG1.N.5 Date and time synchronization tests cases . 41
6.6 TC_PT_NG1.N.6 Parallel calls tests cases . 42
6.7 TC_PT_NG1.N.7 Common parallel call procedures tests cases . 45
6.8 TC_PT_NG1.N.8 Call transfer tests cases . 51
6.9 TC_PT_NG1.N.9 3-party conference with established external and/or internal calls tests cases . 54
6.10 TC_PT_NG1.N.10 Intrusion call tests cases . 55
6.11 TC_PT_NG1.N.11 Call deflection (external or internal) tests cases . 57
6.12 TC_PT_NG1.N.12 Line identification tests cases . 58
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 841 V1.1.1 (2010-04)
6.13 TC_PT_NG1.N.13 Call identification tests cases . 64
6.14 TC_PT_NG1.N.14 Multiple lines tests cases . 67
6.15 TC_PT_NG1.N.15 Multiple calls tests cases . 71
6.16 TC_PT_NG1.N.16 List access service tests cases . 74
6.17 TC_PT_NG1.N.17 Calling line identity restriction tests cases . 135
6.18 TC_PT_NG1.N.18 Call forwarding (external calls) tests cases . 136
6.19 TC_PT_NG1.N.19 DTMF handling tests cases . 136
6.20 TC_PT_NG1.N.20 Tones provision tests cases . 137
6.21 TC_PT_NG1.N.21 Headset management tests cases . 138
6.22 TC_PT_NG1.N.22 Handling of lines where second calls are signalled in-band tests cases . 143
6.23 TC_PT_GAP.N.30 Calling Line Identification Presentation tests cases . 144
6.24 TC_PT_GAP.N.31 Internal call tests cases . 144
6.25 TC_PT_GAP.N.34 Calling Name Identification Presentation tests cases . 145
6.26 TC_PT_GAP.N.35 Enhanced security tests cases . 147
6.27 TC_PT_NG1.A.1 Easy PIN code registration tests cases . 153
6.28 TC_PT_NG1.A.2 Easy pairing registration tests cases . 154
6.29 TC_PT_NG1.A.3 Handset locator tests cases . 155
6.30 TC_PT_GAP.A.4 Terminal identity number assignment in mono cell system tests cases . 155
7 Fixed Part Test specification . 156
7.1 TC_FT_NG1.N.1 Codec negotiation tests cases . 156
7.2 TC_FT_NG1.N.2 Codec switching tests cases. 159
7.3 TC_FT_NG1.N.3 Missed call notification tests cases . 159
7.4 TC_FT_NG1.N.4 Voice message waiting notification tests cases . 160
7.5 TC_FT_NG1.N.5 Date and time synchronization tests cases . 160
7.6 TC_FT_NG1.N.6 Parallel calls tests cases . 161
7.7 TC_FT_NG1.N.7 Common parallel call procedures tests cases . 163
7.8 TC_FT_NG1.N.8 Call transfer tests cases . 171
7.9 TC_FT_NG1.N.9 3-party conference with established external and/or internal calls tests cases . 175
7.10 TC_FT_NG1.N.10 Intrusion call tests cases . 178
7.11 TC_FT_NG1.N.11 Call deflection (external or internal) tests cases . 183
7.12 TC_FT_NG1.N.12 Line identification tests cases . 185
7.13 TC_FT_NG1.N.13 Call identification tests cases . 190
7.14 TC_FT_NG1.N.14 Multiple lines tests cases . 194
7.15 TC_FT_NG1.N.15 Multiple calls tests cases . 200
7.16 TC_FT_NG1.N.16 List access service tests cases . 204
7.17 TC_FT_NG1.N.17 Calling line identity restriction tests cases . 244
7.18 TC_FT_NG1.N.18 Call forwarding (external calls) tests cases . 244
7.19 TC_FT_NG1.N.19 DTMF handling tests cases . 245
7.20 TC_FT_NG1.N.20 Tones provision tests cases . 246
7.21 TC_FT_NG1.N.21 Headset management tests cases . 248
7.22 TC_FT_NG1.N.22 Handling of lines where second calls are signalled in-band tests cases . 251
7.23 TC_FT_GAP.N.30 Calling Line Identification Presentation tests cases . 253
7.24 TC_FT_GAP.N.31 Internal call tests cases . 253
7.25 TC_FT_GAP.N.34 Calling Name Identification Presentation tests cases . 255
7.26 TC_FT_GAP.N.35 Enhanced security tests cases . 255
7.27 TC_FT_NG1.A.1 Easy PIN code registration tests cases . 261
7.28 TC_FT_NG1.A.2 Easy pairing registration tests cases . 262
7.29 TC_FT_NG1.A.3 Handset locator tests cases . 263
7.30 TC_FT_GAP.A.4 Terminal identity number assignment in mono cell system tests cases . 263
Annex A (normative): Declarations on features and procedures supported . 264
A.1 Declarations for portable part . 264
A.1.1 Optional PT features . 264
A.1.2 Extra information for PT testing . 264
A.1.3 Optional or conditional PT procedures . 265
A.1.4 PT relevant test cases list . 267
A.1.4.1 PT is a normal PT (not a headset portable part) . 268
A.1.4.2 PT is a headset portable part . 268
A.2 Declarations for fixed part . 268
A.2.1 Optional FT features . 268
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 841 V1.1.1 (2010-04)
A.2.2 Extra information for FT testing . 269
A.2.3 Optional or conditional FT procedures . 270
A.2.4 FT relevant test cases list . 274
A.2.4.1 FT handling only 'Common parallel call procedures' lines . 274
A.2.4.2 FT handling only 'double call with in-band signalling' lines . 274
A.2.4.3 FT handling 'Common parallel call procedures' lines and 'double call with in-band signalling' lines . 275
Annex B (informative): List of NG Part 3 procedures . 276
History . 282

ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 841 V1.1.1 (2010-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Digital Enhanced Cordless
Telecommunications (DECT).
The present document is based on EN 300 175 parts 1 [1] to 8 [8], EN 300 444 [12], TS 102 527-1 [13] and TS 102
527-3 [14]. General attachment requirements and speech attachment requirements are based on EN 300 176-1 [9],
EN 301 406 [11] (replacing TBR 006 [i.2]) and EN 300 176-2 [10] (previously covered by TBR 010 [i.3]). Further
details of the DECT system may be found in TR 101 178 [i.1].
The information in the present document is believed to be correct at the time of publication. However, DECT
standardization is a rapidly changing area, and it is possible that some of the information contained in the present
document may become outdated or incomplete within relatively short time-scales.
All numbers and names used in examples are imaginary. Any similarities to actual persons, places or directory numbers
is merely coincidental.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 841 V1.1.1 (2010-04)
1 Scope
The present document contains the Profile Test Specification (PTS) and the Test Case Library (TCL) for "New
Generation DECT; Part 3: Extended wideband speech" (TS 102 527-3 [14]). The present document covers both the
Portable (PT) and the Fixed (FT) Radio terminations.
The Test Case Library (TCL) covers also some test cases for "DECT New Generation; part 1; Wideband speech"
(TS 102 527-1 [13]) and for the "Generic Access Profile" (EN 300 444 [12]). This is done because such test cases are
mandatory or especially relevant for New Generation DECT part 3 (see TS 102 527-3 [14]), and are not covered by
existing GAP test specifications.
Due to the ascending compatibility of DECT profiles, all New Generation DECT part 3 devices (see TS 102 527-3 [14])
are required to be also compliant with "DECT New Generation; part 1; Wideband speech" (TS 102 527-1 [13]) and with
the "Generic Access Profile" (GAP, EN 300 444 [12]). However, with the exception of some specific test cases, as
noted above, the present document does not cover the compliance with GAP that is assumed to be enforced by separate
test specifications (see note).
NOTE: The industry de-facto standard practice for insuring the compliance to GAP [12] is the use of
TBR 022 [i.4] amended by TBR 022/A1 [i.5], even when these two documents do not have any longer
their initial regulatory signification. TBR 022 [i.4] relies on the GAP Profile Test Specification
(EN 300 494 parts 1 [i.6] to 3 [i.8]) and on the DECT Test Case Library (EN 300 497 parts 1 [i.9]
to 9 [i.17]).
The objective of the present document is to provide a basis for approval tests of NG-DECT Part 3 equipment giving a
high probability of air interface inter-operability between different manufacturer's DECT equipment.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the
following cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this Clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 1: Overview".
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical layer (PHL)".
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 102 841 V1.1.1 (2010-04)
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[8] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 8: Speech and audio coding and transmission".
[9] ETSI EN 300 176-1: "Digital Enhanced Cordless Telecommunications (DECT); Test
specification; Part 1: Radio".
[10] ETSI EN 300 176-2: "Digital Enhanced Cordless Telecommunications (DECT); Test
specification; Part 2: Audio and speech".
[11] ETSI EN 301 406: "Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for
Digital Enhanced Cordless Telecommunications (DECT) covering the essential requirements
under article 3.2 of the R&TTE Directive; Generic radio".
[12] ETSI EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP)".
[13] ETSI TS 102 527-1: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 1: Wideband Speech".
[14] ETSI TS 102 527-3: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 3: Extended wideband speech services".
[15] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] ETSI TR 101 178: "Digital Enhanced Cordless Telecommunications (DECT); A high Level Guide
to the DECT Standardization".
[i.2] ETSI TBR 006: "Digital Enhanced Cordless Telecommunications (DECT); General terminal
attachment requirements".
[i.3] ETSI TBR 010: "Digital Enhanced Cordless Telecommunications (DECT); General terminal
attachment requirements: Telephony applications".
[i.4] ETSI TBR 022: "Radio Equipment and Systems (RES); Attachment requirements for terminal
equipment for Digital Enhanced Cordless Telecommunications (DECT) Generic Access
Profile (GAP) applications".
[i.5] ETSI TBR 022/A1: Amendment to: "Radio Equipment and Systems (RES); Attachment
requirements for terminal equipment for Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) applications".
[i.6] ETSI EN 300 494-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 1: Summary".
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 102 841 V1.1.1 (2010-04)
[i.7] ETSI EN 300 494-2: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS)
- Portable radio Termination (PT)".
[i.8] ETSI EN 300 494-3: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS)
- Fixed radio Termination (FT)".
[i.9] ETSI EN 300 497-1: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Test Case Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP) for
Medium Access Control (MAC) layer".
[i.10] ETSI EN 300 497-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI);Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) for Medium Access
...