ETSI ETS 300 122-2 ed.1 (1996-08)
Integrated Services Digital Network (ISDN); Generic keypad protocol for the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Integrated Services Digital Network (ISDN); Generic keypad protocol for the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
DE/SPS-05040
Digitalno omrežje z integriranimi storitvami (ISDN) - Generični protokol tipkovnice za podporo dopolnilnih storitev - Protokol digitalne naročniške signalizacije št. 1 (DSS1) - 2. del: Izjava o skladnosti izvedbe protokola (PICS) - Proformna specifikacija
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.URIRUPQDVSHFLILNDFLMDIntegrated Services Digital Network (ISDN); Generic keypad protocol for the support of supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 122-2 E13SIST ETS 300 122-2:1997en01-DYJXVW-19973SIST ETS 300 122-2:1997SLOVENSKI
STANDARD
SIST ETS 300 122-2:1997
EUROPEANETS 300 122-2TELECOMMUNICATIONAugust 1996STANDARDSource: ETSI TC-SPSReference: DE/SPS-05040ICS:33.080Key words:ISDN, DSS1, supplementary service, PICSIntegrated Services Digital Network (ISDN);Generic keypad protocol for the support ofsupplementary services;Digital Subscriber Signalling System No. one (DSS1) protocol;Part 2: Protocol Implementation Conformance Statement (PICS)proforma specificationETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 122-2:1997
Page 2ETS 300 122-2: August 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 122-2:1997
Page 3ETS 300 122-2: August 1996ContentsForeword.51Scope.72Normative references.73Definitions.84Abbreviations.85Conformance.9Annex A (normative):PICS proforma.10A.1Instructions for completing the PICS proforma.10A.1.1Identification of the implementation.10A.1.2Global statement of conformance.10A.1.3Explanation of PICS proforma subclauses.10A.1.4Symbols, abbreviations and terms.11A.2Identification of the implementation.11A.2.1Implementation Under Test (IUT) identification.11A.2.2System Under Test (SUT) identification.11A.2.3Product supplier.12A.2.4Client.12A.2.5PICS contact person.13A.3PICS/System Conformance Statement (SCS).13A.4Identification of the protocol.13A.5Global statement of conformance.14A.6Roles.14A.7User.15A.7.1Major capabilities.15A.7.2Subsidiary capabilities.15A.7.3Protocol data units.15A.7.4Protocol data unit parameters.16A.7.5Timers.16A.7.6Call states.16A.8Network.16A.8.1Major capabilities.16A.8.2Subsidiary capabilities.17A.8.3Protocol data units.17A.8.4Protocol data unit parameters.17A.8.5Timers.17A.8.6Call states.17SIST ETS 300 122-2:1997
Page 4ETS 300 122-2: August 1996Annex B (normative):Requirements list.18B.1User.18B.1.1Requirements on items used in the basic call PICS.18B.2Network.19B.2.1Requirements on items used in the basic call PICS.19History.20SIST ETS 300 122-2:1997
Page 5ETS 300 122-2: August 1996ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols andSwitching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) generic keypad protocolfor the support of supplementary services, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification".NOTE 1:The first part, ETS 300 122-1 (1992), containing the protocol specification, was initiallypublished as ETS 300 122 (1992) and has identical contents.NOTE 2:Further parts covering conformance testing may be identified later.To evaluate conformance of a particular implementation, it is necessary to have a statement of whichcapabilities and options have been implemented for a given Open Systems Interconnection (OSI)protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).Transposition datesDate of adoption of this ETS:16 August 1996Date of latest announcement of this ETS (doa):30 November 1996Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 May 1997Date of withdrawal of any conflicting National Standard (dow):31 May 1997SIST ETS 300 122-2:1997
Page 6ETS 300 122-2: August 1996Blank pageSIST ETS 300 122-2:1997
Page 7ETS 300 122-2: August 19961ScopeThis second part of ETS 300 122 is applicable to the stage three of the generic keypad protocol for thesupport of supplementary services for the pan-European Integrated Services Digital Network (ISDN) asprovided by European public telecommunications operators at the T reference point or coincident S and Treference point (as defined in ITU-T Recommendation I.411 [10]) by means of the Digital SubscriberSignalling System No. one (DSS1) protocol. Stage three identifies the protocol procedures and switchingfunctions needed to support a telecommunications service (see CCITT Recommendation I.130 [9]).This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDNDSS1 generic keypad protocol for the support of supplementary services as specified inETS 300 122-1 [2] in compliance with the relevant requirements and in accordance with the relevantguidance given in ISO/IEC 9646-7 [8].The supplier of a protocol implementation which is claimed to conform to ETS 300 122-1 [2] is required tocomplete a copy of the PICS proforma provided in annex A of this ETS and is required to provide theinformation necessary to identify both the supplier and the implementation.2Normative referencesThis ETS incorporates by dated and undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-networkinterface layer 3; Specifications for basic call control".[2]ETS 300 122-1 (1992): "Integrated Services Digital Network (ISDN); Generickeypad protocol for the support of supplementary services; Digital SubscriberSignalling System No. one (DSS1) protocol; Part 1: Protocol specification".[3]I-ETS 300 314: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1); Protocol Implementation ConformanceStatement (PICS) proforma specification for the network layer signalling protocolfor circuit-mode basic call control (basic access, user)".[4]I-ETS 300 315: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1); Protocol Implementation ConformanceStatement (PICS) proforma specification for the network layer signalling protocolfor circuit-mode basic call control (primary rate access, user)".[5]I-ETS 300 316: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1); Protocol Implementation ConformanceStatement (PICS) proforma specification for the network layer signalling protocolfor circuit-mode basic call control (basic access, network)".[6]I-ETS 300 317: "Integrated Services Digital Network (ISDN); Digital SubscriberSignalling System No. one (DSS1); Protocol Implementation ConformanceStatement (PICS) proforma specification for the network layer signalling protocolfor circuit-mode basic call control (primary rate access, network)".[7]ISO/IEC 9646-1: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 1: General concepts".[8]ISO/IEC 9646-7: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 7: ImplementationConformance Statements".SIST ETS 300 122-2:1997
Page 8ETS 300 122-2: August 1996[9]CCITT Recommendation I.130 (1988): "Method for the characterization oftelecommunication services supported by an ISDN and network capabilities ofan ISDN".[10]ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -Reference configurations".[11]CCITT Recommendation Q.932 (1988): "Generic procedures for the control ofISDN supplementary services".3DefinitionsFor the purposes of this ETS, the following definitions apply, in addition to those given inETS 300 122-1 [2]:Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of anOpen Systems Interconnection (OSI) implementation or system, stating which capabilities have beenimplemented for a given OSI protocol (see ISO/IEC 9646-1 [7]).PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier orconformance test suite specifier, which, when completed for an OSI implementation or system becomesthe PICS (see ISO/IEC 9646-1 [7]).static conformance review: A review of the extent to which the static conformance requirements are metby the IUT, accomplished by comparing the PICS with the static conformance requirements expressed inthe relevant standard(s) (see ISO/IEC 9646-1 [7]).4AbbreviationsFor the purposes of this ETS, the following abbreviations apply:ANDBoolean "and"CConditional requirement (to be observed if the relevant conditions apply)DSS1Digital Subscriber Signalling System No. oneIERInformation Elements ReceivedIETInformation Elements TransmittedISDNIntegrated Services Digital NetworkIUTImplementation Under TestMMandatory requirement (to be observed in all cases)MCMajor CapabilitiesMRMessages ReceivedMTMessages TransmittedN/ANot applicable, not supported or the conditions for status are not metNonot supportedNOTBoolean "not"OOption (may be selected to suit the implementation, provided that anyrequirements applicable to the option are observed)O.nOptions, but support required for either at least one or only one of the options inthe group labelled with the same numeral "n"ORBoolean "or"OSIOpen Systems InterconnectionPICSProtocol Implementation Conformance StatementRRoleRLRequirements ListSCSubsidiary CapabilitiesSCSSystem Conformance StatementSUTSystem Under TestYessupportedSIST ETS 300 122-2:1997
Page 9ETS 300 122-2: August 19965ConformanceA PICS proforma which conforms to this PICS proforma specification shall be technically equivalent toannex A, and shall preserve the numbering and ordering of the items in annex A.A PICS which conforms to this PICS proforma specification shall:a)describe an implementation which claims to conform to ETS 300 122-1 [2];b)be a conforming ICS proforma which has been completed in accordance with the instructions forcompletion given in clause A.1;c)include the information necessary to uniquely identify both the supplier and the implementation.SIST ETS 300 122-2:1997
Page 10ETS 300 122-2: August 1996Annex A (normative):PICS proformaNotwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants thatusers of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for itsintended purposes and may further publish the completed PICS.A.1Instructions for completing the PICS proformaA.1.1Identification of the implementationIdentification of the Implementation Under Test (IUT) and the system in which it resides (the SystemUnder Test (SUT)) should be filled in so as to provide as much detail as possible regarding versionnumbers and configuration options.The product supplier information and client information should both be filled in if they are different.A person who can answer queries regarding information supplied in the PICS should be named as thecontact person.The SCS as defined in ISO/IEC 9646-1 [7] is a document supplied by the client or product supplier thatsummarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or otherstandards are implemented and to which conformance is claimed. The PICS/SCS subclause shoulddescribe the relationship of the PICS to the SCS.A.1.2Global statement of conformanceIf the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completedto facilitate selection of test cases for optional functions.If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed,and all non-supported mandatory capabilities should be identified and explained. Explanations may beentered in the comments field at the bottom of each table or on attached sheets of paper.A.1.3Explanation of PICS proforma subclausesThe PICS proforma contains a Roles clause and thereafter is presented in two parts (for user andnetwork) with the following subclauses, as required:-major capabilities;-subsidiary capabilities;-protocol data unit support;-protocol data unit parameters;-timers;-call states.The User clause shall only be completed for user implementations (including private networkimplementations) while the Network clause shall only be completed for network implementations. TheRoles subclause shall be completed for all implementations.The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICSproforma) is expressed in the Requirements List (RL) contained in annex B. This provides the additionalrestrictions placed on the related proforma (different conditions, different status, etc.).SIST ETS 300 122-2:1997
Page 11ETS 300 122-2: August 1996A.1.4Symbols, abbreviations and termsThe PICS proforma contained in this annex is comprised of information in tabular form in accordance withthe guidelines presented in ISO/IEC 9646-7 [8].The reference column contained in the tables gives reference to the appropriate part(s) ofETS 300 122-1 [2] describing the particular item. Note, however, that a reference merely indicates theplace where the core of a description of an item can be found. Any additional information contained inETS 300 122-1 [2] has to be taken into account when making a statement about the conformance of thatparticular item.The following common notations, defined in ISO/IEC 9646-7 [8], are used for the status column:MmandatoryOoptionalN/Anot applicableO.for mutually exclusive or selectable options from a setThe following common notations, defined in ISO/IEC 9646-7 [8], are used for the support column:Yfor supported/implementedNfor not supported/not implementedA.2Identification of the implementationA.2.1Implementation Under Test (IUT) identificationIUT name:.
...
SLOVENSKI STANDARD
SIST ETS 300 122-2:1997
01-november-1997
'LJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL ,6'1 *HQHULþQLSURWRNROWLSNRYQLFH
]DSRGSRURGRSROQLOQLKVWRULWHY3URWRNROGLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW
'66 GHO ,]MDYDRVNODGQRVWLL]YHGEHSURWRNROD 3,&6 3URIRUPQD
VSHFLILNDFLMD
Integrated Services Digital Network (ISDN); Generic keypad protocol for the support of
supplementary services; Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification
Ta slovenski standard je istoveten z: ETS 300 122-2 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 122-2:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 122-2:1997
---------------------- Page: 2 ----------------------
SIST ETS 300 122-2:1997
EUROPEAN ETS 300 122-2
TELECOMMUNICATION August 1996
STANDARD
Source: ETSI TC-SPS Reference: DE/SPS-05040
ICS: 33.080
Key words: ISDN, DSS1, supplementary service, PICS
Integrated Services Digital Network (ISDN);
Generic keypad protocol for the support of
supplementary services;
Digital Subscriber Signalling System No. one (DSS1) protocol;
Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.
---------------------- Page: 3 ----------------------
SIST ETS 300 122-2:1997
Page 2
ETS 300 122-2: August 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 122-2:1997
Page 3
ETS 300 122-2: August 1996
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions.8
4 Abbreviations.8
5 Conformance.9
Annex A (normative): PICS proforma.10
A.1 Instructions for completing the PICS proforma .10
A.1.1 Identification of the implementation .10
A.1.2 Global statement of conformance.10
A.1.3 Explanation of PICS proforma subclauses .10
A.1.4 Symbols, abbreviations and terms.11
A.2 Identification of the implementation.11
A.2.1 Implementation Under Test (IUT) identification .11
A.2.2 System Under Test (SUT) identification .11
A.2.3 Product supplier.12
A.2.4 Client.12
A.2.5 PICS contact person.13
A.3 PICS/System Conformance Statement (SCS).13
A.4 Identification of the protocol .13
A.5 Global statement of conformance .14
A.6 Roles .14
A.7 User.15
A.7.1 Major capabilities .15
A.7.2 Subsidiary capabilities.15
A.7.3 Protocol data units .15
A.7.4 Protocol data unit parameters.16
A.7.5 Timers.16
A.7.6 Call states .16
A.8 Network .16
A.8.1 Major capabilities .16
A.8.2 Subsidiary capabilities.17
A.8.3 Protocol data units .17
A.8.4 Protocol data unit parameters.17
A.8.5 Timers.17
A.8.6 Call states .17
---------------------- Page: 5 ----------------------
SIST ETS 300 122-2:1997
Page 4
ETS 300 122-2: August 1996
Annex B (normative): Requirements list . 18
B.1 User . 18
B.1.1 Requirements on items used in the basic call PICS . 18
B.2 Network. 19
B.2.1 Requirements on items used in the basic call PICS . 19
History. 20
---------------------- Page: 6 ----------------------
SIST ETS 300 122-2:1997
Page 5
ETS 300 122-2: August 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols and
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. one
(DSS1) protocol specification for the Integrated Services Digital Network (ISDN) generic keypad protocol
for the support of supplementary services, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification".
NOTE 1: The first part, ETS 300 122-1 (1992), containing the protocol specification, was initially
published as ETS 300 122 (1992) and has identical contents.
NOTE 2: Further parts covering conformance testing may be identified later.
To evaluate conformance of a particular implementation, it is necessary to have a statement of which
capabilities and options have been implemented for a given Open Systems Interconnection (OSI)
protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).
Transposition dates
Date of adoption of this ETS: 16 August 1996
Date of latest announcement of this ETS (doa): 30 November 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 May 1997
Date of withdrawal of any conflicting National Standard (dow): 31 May 1997
---------------------- Page: 7 ----------------------
SIST ETS 300 122-2:1997
Page 6
ETS 300 122-2: August 1996
Blank page
---------------------- Page: 8 ----------------------
SIST ETS 300 122-2:1997
Page 7
ETS 300 122-2: August 1996
1 Scope
This second part of ETS 300 122 is applicable to the stage three of the generic keypad protocol for the
support of supplementary services for the pan-European Integrated Services Digital Network (ISDN) as
provided by European public telecommunications operators at the T reference point or coincident S and T
reference point (as defined in ITU-T Recommendation I.411 [10]) by means of the Digital Subscriber
Signalling System No. one (DSS1) protocol. Stage three identifies the protocol procedures and switching
functions needed to support a telecommunications service (see CCITT Recommendation I.130 [9]).
This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the ISDN
DSS1 generic keypad protocol for the support of supplementary services as specified in
ETS 300 122-1 [2] in compliance with the relevant requirements and in accordance with the relevant
guidance given in ISO/IEC 9646-7 [8].
The supplier of a protocol implementation which is claimed to conform to ETS 300 122-1 [2] is required to
complete a copy of the PICS proforma provided in annex A of this ETS and is required to provide the
information necessary to identify both the supplier and the implementation.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 102-1: "Integrated Services Digital Network (ISDN); User-network
interface layer 3; Specifications for basic call control".
[2] ETS 300 122-1 (1992): "Integrated Services Digital Network (ISDN); Generic
keypad protocol for the support of supplementary services; Digital Subscriber
Signalling System No. one (DSS1) protocol; Part 1: Protocol specification".
[3] I-ETS 300 314: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1); Protocol Implementation Conformance
Statement (PICS) proforma specification for the network layer signalling protocol
for circuit-mode basic call control (basic access, user)".
[4] I-ETS 300 315: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1); Protocol Implementation Conformance
Statement (PICS) proforma specification for the network layer signalling protocol
for circuit-mode basic call control (primary rate access, user)".
[5] I-ETS 300 316: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1); Protocol Implementation Conformance
Statement (PICS) proforma specification for the network layer signalling protocol
for circuit-mode basic call control (basic access, network)".
[6] I-ETS 300 317: "Integrated Services Digital Network (ISDN); Digital Subscriber
Signalling System No. one (DSS1); Protocol Implementation Conformance
Statement (PICS) proforma specification for the network layer signalling protocol
for circuit-mode basic call control (primary rate access, network)".
[7] ISO/IEC 9646-1: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 1: General concepts".
[8] ISO/IEC 9646-7: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 7: Implementation
Conformance Statements".
---------------------- Page: 9 ----------------------
SIST ETS 300 122-2:1997
Page 8
ETS 300 122-2: August 1996
[9] CCITT Recommendation I.130 (1988): "Method for the characterization of
telecommunication services supported by an ISDN and network capabilities of
an ISDN".
[10] ITU-T Recommendation I.411 (1993): "ISDN user-network interfaces -
Reference configurations".
[11] CCITT Recommendation Q.932 (1988): "Generic procedures for the control of
ISDN supplementary services".
3 Definitions
For the purposes of this ETS, the following definitions apply, in addition to those given in
ETS 300 122-1 [2]:
Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of an
Open Systems Interconnection (OSI) implementation or system, stating which capabilities have been
implemented for a given OSI protocol (see ISO/IEC 9646-1 [7]).
PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier or
conformance test suite specifier, which, when completed for an OSI implementation or system becomes
the PICS (see ISO/IEC 9646-1 [7]).
static conformance review: A review of the extent to which the static conformance requirements are met
by the IUT, accomplished by comparing the PICS with the static conformance requirements expressed in
the relevant standard(s) (see ISO/IEC 9646-1 [7]).
4 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
AND Boolean "and"
C Conditional requirement (to be observed if the relevant conditions apply)
DSS1 Digital Subscriber Signalling System No. one
IER Information Elements Received
IET Information Elements Transmitted
ISDN Integrated Services Digital Network
IUT Implementation Under Test
M Mandatory requirement (to be observed in all cases)
MC Major Capabilities
MR Messages Received
MT Messages Transmitted
N/A Not applicable, not supported or the conditions for status are not met
No not supported
NOT Boolean "not"
O Option (may be selected to suit the implementation, provided that any
requirements applicable to the option are observed)
O.n Options, but support required for either at least one or only one of the options in
the group labelled with the same numeral "n"
OR Boolean "or"
OSI Open Systems Interconnection
PICS Protocol Implementation Conformance Statement
R Role
RL Requirements List
SC Subsidiary Capabilities
SCS System Conformance Statement
SUT System Under Test
Yes supported
---------------------- Page: 10 ----------------------
SIST ETS 300 122-2:1997
Page 9
ETS 300 122-2: August 1996
5 Conformance
A PICS proforma which conforms to this PICS proforma specification shall be technically equivalent to
annex A, and shall preserve the numbering and ordering of the items in annex A.
A PICS which conforms to this PICS proforma specification shall:
a) describe an implementation which claims to conform to ETS 300 122-1 [2];
b) be a conforming ICS proforma which has been completed in accordance with the instructions for
completion given in clause A.1;
c) include the information necessary to uniquely identify both the supplier and the implementation.
---------------------- Page: 11 ----------------------
SIST ETS 300 122-2:1997
Page 10
ETS 300 122-2: August 1996
Annex A (normative): PICS proforma
Notwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants that
users of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Instructions for completing the PICS proforma
A.1.1 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System
Under Test (SUT)) should be filled in so as to provide as much detail as possible regarding version
numbers and configuration options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the
contact person.
The SCS as defined in ISO/IEC 9646-1 [7] is a document supplied by the client or product supplier that
summarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or other
standards are implemented and to which conformance is claimed. The PICS/SCS subclause should
describe the relationship of the PICS to the SCS.
A.1.2 Global statement of conformance
If the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completed
to facilitate selection of test cases for optional functions.
If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed,
and all non-supported mandatory capabilities should be identified and explained. Explanations may be
entered in the comments field at the bottom of each table or on attached sheets of paper.
A.1.3 Explanation of PICS proforma subclauses
The PICS proforma contains a Roles clause and thereafter is presented in two parts (for user and
network) with the following subclauses, as required:
- major capabilities;
- subsidiary capabilities;
- protocol data unit support;
- protocol data unit parameters;
- timers;
- call states.
The User clause shall only be completed for user implementations (including private network
implementations) while the Network clause shall only be completed for network implementations. The
Roles subclause shall be completed for all implementations.
The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICS
proforma) is expressed in the Requirements List (RL) contained in annex B. This provides the additional
restrictions placed on the related proforma (different conditions, different status, etc.).
---------------------- Page: 12 ----------------------
SIST ETS 300 122-2:1997
Page 11
ETS 300 122-2: August 1996
A.1.4 Symbols, abbreviations and terms
The PICS proforma contained in this annex is comprised of information in tabular form in accordance with
the guidelines presented in ISO/IEC 9646-7 [8].
The reference column contained in the tables gives reference to the appropriate part(s) of
ETS 300 122-1 [2] describing the particular item. Note, however, that a reference merely indicates the
place where the core of a description of an item can be found. Any additional information contained in
ETS 300 122-1 [2] has to be taken into account when making a statement about the conformance of that
particular item.
The following common notations, defined in ISO/IEC 9646-7 [8], are used for the status column:
M mandatory
O optional
N/A not applicable
O. for mutually exclusive or selectable options from a set
The following common notations, defined in ISO/IEC 9646-7 [8], are used for the support column:
Y for supported/implemented
N for not supported/not implemented
A.2 Identification of the implementation
A.2.1 Implementation Under Test (IUT) identification
IUT name:
..................................................................................................................................................
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.