ETSI TS 103 544-18 V1.3.1 (2019-10)

Publicly Available Specification (PAS); Intelligent Transport Systems (ITS); MirrorLink®; Part 18: IEEE 802.11TM Car Connectivity Consortium (CCC) Information Element

RTS/ITS-98-18

General Information

• Status: Published
• Publication Date: 08-Oct-2019
• Technical Committee: ITS - Intelligent Transport Systems
• Current Stage: 12 - Completion
• Due Date: 30-Sep-2019
• Completion Date: 09-Oct-2019

Standards Content (Sample)

ETSI TS 103 544-18 V1.3.1 (2019-10)






TECHNICAL SPECIFICATION
Publicly Available Specification (PAS);
Intelligent Transport Systems (ITS);
®
MirrorLink ;
™
Part 18: IEEE 802.11 Car Connectivity Consortium (CCC)
Information Element
CAUTION
The present document has been submitted to ETSI as a PAS produced by CCC and
approved by the ETSI Technical Committee Intelligent Transport Systems (ITS).
CCC is owner of the copyright of the document CCC-TS-050 and/or had all relevant rights and had assigned said rights to ETSI
on an "as is basis". Consequently, to the fullest extent permitted by law, ETSI disclaims all warranties whether express, implied,
statutory or otherwise including but not limited to merchantability, non-infringement of any intellectual property rights of third
parties. No warranty is given about the accuracy and the completeness of the content of the present document.

---------------------- Page: 1 ----------------------
2 ETSI TS 103 544-18 V1.3.1 (2019-10)



Reference
RTS/ITS-98-18
Keywords
interface, ITS, PAS, smartphone

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm
except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
©ETSI 2019.
© Car Connectivity Consortium 2011-2019.
All rights reserved.
ETSI logo is a Trade Mark of ETSI registered for the benefit of its Members.
MirrorLink® is a registered trademark of Car Connectivity Consortium LLC.
RFB® and VNC® are registered trademarks of RealVNC Ltd.
UPnP® is a registered trademark of Open Connectivity Foundation, Inc.
Other names or abbreviations used in the present document may be trademarks of their respective owners.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 103 544-18 V1.3.1 (2019-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 IEEE 802.11 Information Element . 6
5 CCC Information Element. 7
5.1 General . 7
5.2 MirrorLink Subelements . 7
5.2.1 General . 7
5.2.2 MirrorLink UPnP Device Information Subelement . 8
5.2.3 Internet Accessibility Subelement . 9
Annex A (informative): Authors and Contributors . 10
History . 11


ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 103 544-18 V1.3.1 (2019-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems
(ITS).
The present document is part 18 of a multi-part deliverable. Full details of the entire series can be found in part 1 [i.1].
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 103 544-18 V1.3.1 (2019-10)
1 Scope
®
The present document is part of the MirrorLink specification which specifies an interface for enabling remote user
interaction of a mobile device via another device. The present document is written having a vehicle head-unit to interact
with the mobile device in mind, but it will similarly apply for other devices, which provide a color display, audio
input/output and user input mechanisms.
IEEE allows defining
...