Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user

DEN/SPS-05149-4

Širokopasovno digitalno omrežje z integriranimi storitvami (B-ISDN) - Protokol digitalne naročniške signalizacije št. 2 (DSS2) - Specifikacija tretje plasti vmesnika uporabnik-omrežje B-ISDN za krmiljenje osnovnega klica/nosilca - 4. del: Abstraktni preskušalni niz (ATS) in delna dodatna informacija za preskušanje izvedbe protokola (PIXIT) - Proforma specifikacije za uporabnika

General Information

Status
Published
Publication Date
22-Jun-2000
Technical Committee
Current Stage
12 - Completion
Due Date
09-Jun-2000
Completion Date
23-Jun-2000
Mandate

Buy Standard

Standard
P EN 300 443-4:2000
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 300 443-4:2003
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHVNXãDQMHBroadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN SIST EN 300 443-4:en01-december3SIST EN 300 443-4:SLOVENSKI
STANDARD



SIST EN 300 443-4:2003



Draft EN 300 443-4 V1.1.1 (1999-07)European Standard (Telecommunications series)Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol;Part 4: Abstract Test Suite (ATS) and partial ProtocolImplementation eXtra Information for Testing (PIXIT)proforma specification for the userSIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)2ReferenceDEN/SPS-05149-4 (43p00ico.PDF)KeywordsATS, basic, B-ISDN, broadband, DSS2, ISDN,layer 3, PIXIT, UNI, userETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/88Internetsecretariat@etsi.frIndividual copies of this ETSI deliverablecan be downloaded fromhttp://www.etsi.orgIf you find errors in the present document, send yourcomment to: editor@etsi.frCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1999.All rights reserved.SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)3ContentsIntellectual Property Rights.5Foreword.51Scope.62References.63Definitions and abbreviations.73.1Definitions.73.2Abbreviations.74Abstract Test Method.85Untestable test purposes.86ATS to TP map.87PCTR conformance.88PIXIT conformance.99ATS Conformance.9Annex A (normative):Protocol Conformance Test Report (PCTR) proforma.10A.1Identification summary.10A.1.1Protocol conformance test report.10A.1.2IUT identification.10A.1.3Testing environment.10A.1.4Limits and reservations.11A.1.5Comments.11A.2IUT Conformance status.11A.3Static conformance summary.11A.4Dynamic conformance summary.12A.5Static conformance review report.12A.6Test campaign report.12A.7Observations.21Annex B (normative):Partial PIXIT proforma.22B.1Identification summary.22B.2Abstract test suite summary.22B.3Test laboratory.22B.4Client (of the Test Laboratory).23B.5SUT.23B.6Protocol information.24B.6.1Protocol identification.24B.6.2Configuration to be tested.24B.6.3Stimuli for the IUT.25B.6.4Test management timers.26B.6.5Parameter Values.26SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)4Annex C (normative):Abstract Test Suite (ATS).28C.1The TTCN Graphical form (TTCN.GR).28C.2The TTCN Machine Processable form (TTCN.MP).28History.29SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)5Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee Services andProtocol for Advanced Networks (SPAN), and is now submitted for the Public Enquiry phase of the ETSI standardsTwo-step Approval Procedure.The present document is part 4 of a multi-part EN covering the Digital Subscriber Signalling System No. two (DSS2)protocol specification for the B-ISDN user-network interface layer 3 specification for basic call/bearer control, asidentified below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information forTesting (PIXIT) proforma specification for the user";Part 5:"Test Suite Structure and Test Purposes (TSS&TP) specification for the network";Part 6:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information forTesting (PIXIT) proforma specification for the network".Proposed national transposition datesDate of latest announcement of this EN (doa):3 months after ETSI publicationDate of latest publication of new National Standardor endorsement of this EN (dop/e):6 months after doaDate of withdrawal of any conflicting National Standard (dow):6 months after doaSIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)61ScopeThe present document specifies the network Abstract Test Suite (ATS) for the TB reference point or coincident SB andTB reference point (as defined in ITU-T Recommendation I.413 [9]) of implementations conforming to the standards forthe signalling user-network layer 3 specification for basic call/bearer control of the Digital Subscriber Signalling SystemNo. two (DSS2) protocol for the pan-European Broadband Integrated Services Digital Network (B-ISDN),EN 300 443-1 [1].A further part of the present document specifies the Test Suite Structure and Test Purposes (TSS&TP) related to thisATS and partial PIXIT proforma. Other parts specify the TSS&TP and the ATS and partial PIXIT proforma for theUser side of the TB reference point or coincident SB and TB reference point of implementations conforming toEN 300 443-1 [1].2ReferencesThe following documents contain provisions which, through reference in this text, constitute provisions of the presentdocument.· References are either specific (identified by date of publication, edition number, version number, etc.) ornon-specific.· For a specific reference, subsequent revisions do not apply.· For a non-specific reference, the latest version applies.· A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the samenumber.[1]EN 300 443-1 (V1.3): "Broadband Integrated Services Digital Network (B-ISDN); DigitalSubscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3specification for basic call/bearer control; Part 1: Protocol specification [ITU-T RecommendationQ.2931 (1995), modified]".[2]EN 300 443-2 (V1.2): "Broadband Integrated Services Digital Network (B-ISDN); DigitalSubscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3specification for basic call/bearer control; Part 2: Protocol Implementation Conformance Statement(PICS) proforma specification".[3]EN 300 443-3 (V1.1): "Broadband Integrated Services Digital Network (B-ISDN); DigitalSubscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3specification for basic call/bearer control; Part 3: Test Suite Structure and Test Purposes(TSS&TP) specification for the user".[4]ISO/IEC 9646-1 (1994): "Information technology; Open Systems Interconnection; Conformancetesting methodology and framework; Part 1: General concepts".[5]ISO/IEC 9646-2 (1994): "Information technology; Open Systems Interconnection; Conformancetesting methodology and framework; Part 2: Abstract Test Suite specification".[6]ISO/IEC 9646-3 (1998): "Information technology; Open Systems Interconnection; Conformancetesting methodology and framework; Part 3: The Tree and Tabular Combined Notation (TTCN)".[7]ISO/IEC 9646-4 (1994): "Information technology; Open Systems Interconnection; Conformancetesting methodology and framework; Part 4: Test realization".[8]ISO/IEC 9646-5 (1994): "Information technology; Open Systems Interconnection; Conformancetesting methodology and framework; Part 5: Requirements on test laboratories and clients for theconformance assessment process".[9]ITU-T Recommendation I.413 (1993): "B-ISDN user-network interface".SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)73Definitions and abbreviations3.1DefinitionsFor the purposes of the present document, the following terms and definitions apply.Implementation Under Test (IUT): see ISO/IEC 9646-1 [4].System Under Test (SUT): see ISO/IEC 9646-1 [4].Abstract Test Suite (ATS): see ISO/IEC 9646-1 [4].Protocol Implementation Conformance Statement (PICS): see ISO/IEC 9646-1 [4].PICS proforma: see ISO/IEC 9646-1 [4].Protocol Implementation eXtra Information for Testing (PIXIT): see ISO/IEC 9646-1 [4].PIXIT proforma: see ISO/IEC 9646-1 [4].Lower Tester (LT): see ISO/IEC 9646-1 [4].Upper Tester (UT): see ISO/IEC 9646-1 [4].Point of Control and Observation (PCO): see ISO/IEC 9646-1 [4].3.2AbbreviationsFor the purposes of the present document, the following abbreviations apply:ATMAbstract Test MethodATSAbstract Test SuiteExTSExecutable Test SuiteIUTImplementation Under TestLTLower TesterMOTMeans Of TestingPCOPoint of Control and ObservationPICSProtocol Implementation Conformance StatementPIXITProtocol Implementation eXtra Information for TestingPTCParallel Test ComponentSUTSystem Under TestTCPTest Co-ordination ProceduresTPTest PurposeTTCNTree and Tabular Combined NotationUTUpper TesterSIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)84Abstract Test MethodThe remote test method is applied for the user ATS. The Point of Control and Observation (PCO) resides at the serviceaccess point between layers 2 and 3. This PCO is named "L0" (for Lower). The L0 PCO is used to control and observethe behaviour of the Implementation Under Test (IUT) and test case verdicts are assigned depending on the behaviourobserved at this PCO.TesterSUTLTIUTPCOLayer 2Layer 2Layer 1Layer 1Service providerFigure 1: Remote test methodISO/IEC 9646-2 [5] allows the informal expression of Test Co-ordination Procedures (TCP) between the System UnderTest (SUT) upper layer(s) and the Lower Tester (LT). In the ATS contained in annex C, TCP is achieved by use of asecond "informal" PCO, called "O" (for Operator). This PCO is used to specify control but not observation above theIUT and consequently, events at this PCO are never used to generate test case verdicts. The use of this O PCO isregarded as a preferred alternative to the use of the implicit send event, in that it allows the ATS to specify in a clear andmeaningful way what actions are required to be performed on the IUT.5Untestable test purposesThere are no untestable test purposes associated with this ATS.6ATS to TP mapThe identifiers used for the TPs (see EN 300 443-3 [3]) are reused as test case names. Thus there is a straightforwardone-to-one mapping.7PCTR conformanceA test laboratory, when requested by a client to produce a PCTR, is required, as specified in ISO/IEC 9646-5 [8], toproduce a PCTR conformant with the PCTR template given in annex B of ISO/IEC 9646-5 [8].Furthermore, a test laboratory, offering testing for the ATS specification contained in annex C, when requested by aclient to produce a PCTR, is required to produce a PCTR conformant with the PCTR proforma contained in annex A ofthe present document.A PCTR which conforms to this PCTR proforma specification shall preserve the content and ordering of the clausescontained in annex A. Clause A.6 of the PCTR may contain additional columns. If included, these shall be placed to theright of the existing columns. Text in italics may be retained by the test laboratory.SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)98PIXIT conformanceA test realizer, producing an executable test suite for the Abstract Test Suite (ATS) specification contained in annex C,is required, as specified in ISO/IEC 9646-4 [7], to produce an augmented partial PIXIT proforma conformant with thispartial PIXIT proforma specification.An augmented partial PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum,have contents which are technically equivalent to annex B. The augmented partial PIXIT proforma may containadditional questions that need to be answered in order to prepare the Means Of Testing (MOT) for a particularImplementation Under Test (IUT).A test laboratory, offering testing for the ATS specification contained in annex C, is required, as specified inISO/IEC 9646-5 [8], to further augment the augmented partial PIXIT proforma to produce a PIXIT proformaconformant with this partial PIXIT proforma specification.A PIXIT proforma which conforms to this partial PIXIT proforma specification shall, as a minimum, have contentswhich are technically equivalent to annex B. The PIXIT proforma may contain additional questions that need to beanswered in order to prepare the test laboratory for a particular IUT.9ATS ConformanceThe test realizer, producing a Means Of Testing (MOT) and Executable Test Suite (ExTS) for this Abstract Test Suite(ATS) specification, shall comply with the requirements of ISO/IEC 9646-4 [7]. In particular, these concern therealization of an Executable Test Suite (ExTS) based on each ATS. The test realizer shall provide a statement ofconformance of the MOT to this ATS specification.An ExTS which conforms to this ATS specification shall contain test groups and test cases which are technicallyequivalent to those contained in the ATS in annex C. All sequences of test events comprising an abstract test case shallbe capable of being realized in the executable test case. Any further checking which the test system might be capable ofperforming is outside the scope of this ATS specification and shall not contribute to the verdict assignment for each testcase.Test laboratories running conformance test services using this ATS shall comply with ISO/IEC 9646-5 [8].A test laboratory which claims to conform to this ATS specification shall use an MOT which conforms to this ATS.SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)10Annex A (normative):Protocol Conformance Test Report (PCTR) proformaNotwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that usersof the present document may freely reproduce the PCTR proforma in this annex so that it can be used for its intendedpurposes and may further publish the completed PCTR.A.1Identification summaryA.1.1Protocol conformance test reportPCTR number:PCTR Date:Corresponding SCTR number:Corresponding SCTR date:Test Laboratory identification:Test Laboratory Manager:Signature:A.1.2IUT identificationName:Version:Protocol specification:EN 300 443PICS:Previous PCTRs (if any)A.1.3Testing environmentPIXIT Reference number:ATS Specification:EN 300 443-4Abstract Test Method:Remote test method (see ISO/IEC 9646-2)Means of Testing identification:Dates of testing:Conformance Log reference(s):Retention Date for Log reference(s):SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)11A.1.4Limits and reservationsAdditional information relevant to the technical contents or further use of the test report, or to the rights andobligations of the test laboratory and the client, may be given here. Such information may include restriction on thepublication of the report.A.1.5CommentsAdditional comments may be given by either the client or the test laboratory on any of the contents of the PCTR, forexample, to note disagreement between the two parties.A.2IUT Conformance statusThis IUT has or has not been shown by conformance assessment to be non-conforming to the specified protocolspecification.Strike the appropriate words in this sentence. If the PICS for this IUT is consistent with the static conformancerequirements (as specified in clause A.3 of this report) and there are no "FAIL" verdicts to be recorded (in clause A.6)strike the words "has or", otherwise strike the words "or has not".A.3Static conformance summaryThe PICS for this IUT is or is not consistent with the static conformance requirements in the specified protocol.Strike the appropriate words in this sentence.SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)12A.4Dynamic conformance summaryThe test campaign did or did not reveal errors in the IUT.Strike the appropriate words in this sentence. If there are no "FAIL" verdicts to be recorded (in clause A.6 of thisreport) strike the words "did or", otherwise strike the words "or did not".Summary of the results of groups of tests:.A.5Static conformance review reportIf clause A.3 indicates non-conformance, this subclause itemizes the mismatches between the PICS and the staticconformance requirements of the specified protocol specification.A.6Test campaign reportATS ReferenceSelected ?(Y/N)Run ?(Y/N)VerdictObservationsL3BU_01_01L3BU_01_02L3BU_01_03L3BU_01_04L3BU_02_01L3BU_03_01L3BU_03_02L3BU_03_03L3BU_04_01L3BU_04_02L3BU_05_01L3BU_06_01L3BU_06_02L3BU_07_01L3BU_07_02L3BU_07_03L3BU_07_04L3BU_08_01L3BU_08_02L3BU_08_03L3BU_08_04L3BU_09_01SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)13ATS ReferenceSelected ?(Y/N)Run ?(Y/N)VerdictObservationsL3BU_09_02L3BU_09_03L3BU_09_04L3BU_10_01L3BU_10_02L3BU_10_03L3BU_10_04L3BU_10_05L3BU_10_06L3BU_10_07L3BU_10_08L3BU_11_01L3BU_11_02L3BU_12_01L3BU_12_02L3BU_13_01L3BU_13_02L3BU_14_01L3BU_15_01L3BU_15_02L3BU_15_03L3BU_15_04L3BU_15_05L3BU_15_06L3BU_15_07L3BU_15_08L3BU_15_09L3BU_15_10L3BU_15_11L3BU_16_01L3BU_16_02L3BU_16_03L3BU_16_04L3BU_16_05L3BU_16_06L3BU_16_07L3BU_16_08L3BU_17_01L3BU_17_02L3BU_18_01L3BU_18_02L3BU_18_03L3BU_18_04L3BU_19_01L3BU_19_02L3BU_19_03L3BU_19_04L3BU_19_05L3BU_19_06L3BU_19_07L3BU_19_08L3BU_19_09L3BU_19_10L3BU_19_11L3BU_19_12L3BU_19_13L3BU_19_14L3BU_19_15L3BU_19_16L3BU_19_17L3BU_19_18L3BU_19_19L3BU_19_20SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)14ATS ReferenceSelected ?(Y/N)Run ?(Y/N)VerdictObservationsL3BU_20_01L3BU_20_02L3BU_20_03L3BU_20_04L3BU_20_05L3BU_20_06L3BU_20_07L3BU_20_08L3BU_20_09L3BU_20_10L3BU_20_11L3BU_20_12L3BU_20_13L3BU_20_14L3BU_20_15L3BU_20_16L3BU_20_17L3BU_20_18L3BU_20_19L3BU_20_20L3BU_20_21L3BU_20_22L3BU_20_23L3BU_20_24L3BU_20_25L3BU_20_26L3BU_20_27L3BU_20_28L3BU_20_29L3BU_20_30L3BU_20_31L3BU_20_32L3BU_20_33L3BU_20_34L3BU_20_35L3BU_20_36L3BU_20_37L3BU_20_38L3BU_20_39L3BU_20_40L3BU_20_41L3BU_20_42L3BU_20_43L3BU_20_44L3BU_20_45L3BU_21_01L3BU_21_02L3BU_21_03L3BU_21_04L3BU_21_05L3BU_21_06L3BU_21_07L3BU_21_08L3BU_21_09L3BU_21_10L3BU_21_11L3BU_21_12L3BU_21_13L3BU_21_14L3BU_21_15L3BU_21_16L3BU_21_17L3BU_21_18SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)15ATS ReferenceSelected ?(Y/N)Run ?(Y/N)VerdictObservationsL3BU_21_19L3BU_21_20L3BU_21_21L3BU_21_22L3BU_21_23L3BU_21_24L3BU_21_25L3BU_21_26L3BU_21_27L3BU_21_28L3BU_21_29L3BU_21_30L3BU_21_31L3BU_21_32L3BU_21_33L3BU_21_34L3BU_21_35L3BU_21_36L3BU_21_37L3BU_21_38L3BU_22_01L3BU_22_02L3BU_22_03L3BU_22_04L3BU_22_05L3BU_22_06L3BU_22_07L3BU_22_08L3BU_22_09L3BU_22_10L3BU_22_11L3BU_22_12L3BU_22_13L3BU_22_14L3BU_22_15L3BU_22_16L3BU_22_17L3BU_22_18L3BU_22_19L3BU_22_20L3BU_22_21L3BU_22_22L3BU_22_23L3BU_22_24L3BU_22_25L3BU_22_26L3BU_22_27L3BU_22_28L3BU_22_29L3BU_22_30L3BU_22_31L3BU_22_32L3BU_23_01L3BU_23_02L3BU_23_03L3BU_23_04L3BU_23_05L3BU_23_06L3BU_23_07L3BU_23_08L3BU_23_09L3BU_23_10L3BU_23_11SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)16ATS ReferenceSelected ?(Y/N)Run ?(Y/N)VerdictObservationsL3BU_23_12L3BU_23_13L3BU_23_14L3BU_23_15L3BU_23_16L3BU_23_17L3BU_23_18L3BU_23_19L3BU_23_20L3BU_23_21L3BU_23_22L3BU_23_23L3BU_23_24L3BU_23_25L3BU_23_26L3BU_23_27L3BU_23_28L3BU_23_29L3BU_23_30L3BU_23_31L3BU_23_32L3BU_24_01L3BU_24_02L3BU_24_03L3BU_24_04L3BU_24_05L3BU_24_06L3BU_24_07L3BU_24_08L3BU_24_09L3BU_24_10L3BU_24_11L3BU_24_12L3BU_24_13L3BU_24_14L3BU_24_15L3BU_24_16L3BU_24_17L3BU_24_18L3BU_24_19L3BU_24_20L3BU_24_21L3BU_24_22L3BU_24_23L3BU_25_01L3BU_25_02L3BU_25_03L3BU_25_04L3BU_25_05L3BU_25_06L3BU_25_07L3BU_25_08L3BU_25_09L3BU_25_10L3BU_25_11L3BU_25_12L3BU_25_13L3BU_25_14L3BU_25_15L3BU_25_16L3BU_25_17L3BU_25_18L3BU_25_19SIST EN 300 443-4:2003



ETSIETSI Draft EN 300 443-4 V1.1.1 (1999-07)17ATS ReferenceSelected ?(Y/N)Run ?(Y/N)VerdictObservationsL3BU_25_20L3BU_25_21L3BU_25_22L3BU_25_23L3BU_25_24L3BU_25_25L3BU_25_26L3BU_25_27L3BU_25_28L3BU_25_29L3BU_25_30L3BU_25_31L3BU_25_32L3BU_25_33L3BU_25_34L3BU_25_35L3BU_25_36L3BU_25_37L3BU_26_01L3BU_26_02L3BU_26_03L3BU_26_04L3BU_26_05L3BU_26_06L3BU_26_07L3BU_26_08L3BU_26_09L3BU_26_10L3BU_26_11L3BU_26_12L3BU_26_13L3BU_
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHVNXãDQMHBroadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 443-4 Version 1.1.2SIST EN 300 443-4:2003en01-december-2003SIST EN 300 443-4:2003SLOVENSKI
STANDARD



SIST EN 300 443-4:2003



ETSIEN300443-4V1.1.2(2000-06)EuropeanStandard(Telecommunicationsseries)BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part4:AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationfortheuserSIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)2ReferenceDEN/SPS-05149-4KeywordsATS,basic,B-ISDN,broadband,DSS2,ISDN,layer3,PIXIT,UNI,userETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)3ContentsIntellectualPropertyRights.5Foreword.51Scope.62References.63Definitionsandabbreviations.73.1Definitions.73.2Abbreviations.74AbstractTestMethod.85Untestabletestpurposes.86ATStoTPmap.87PCTRconformance.88PIXITconformance.99ATSConformance.9AnnexA(normative):ProtocolConformanceTestReport(PCTR)proforma.10A.1Identificationsummary.10A.1.1Protocolconformancetestreport.10A.1.2IUTidentification.10A.1.3Testingenvironment.10A.1.4Limitsandreservations.11A.1.5Comments.11A.2IUTConformancestatus.11A.3Staticconformancesummary.11A.4Dynamicconformancesummary.12A.5Staticconformancereviewreport.12A.6Testcampaignreport.12A.7Observations.21AnnexB(normative):PartialPIXITproforma.22B.1Identificationsummary.22B.2Abstracttestsuitesummary.22B.3Testlaboratory.22B.4Client(oftheTestLaboratory).23B.5SUT.23B.6Protocolinformation.24B.6.1Protocolidentification.24B.6.2Configurationtobetested.24B.6.3StimulifortheIUT.25B.6.4Testmanagementtimers.26B.6.5ParameterValues.26SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)4AnnexC(normative):AbstractTestSuite(ATS).28C.1TheTTCNGraphicalform(TTCN.GR).28C.2TheTTCNMachineProcessableform(TTCN.MP).28History.29SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeServicesandProtocolforAdvancedNetworks(SPAN).Thepresentdocumentispart4ofamulti-partENcoveringtheBroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol,asidentifiedbelow:Part1:"Protocolspecification[ITU-TRecommendationQ.2931(1995),modified]";Part2:"ProtocolImplementationConformanceStatement(PICS)proformaspecification";Part3:"TestSuiteStructureandTestPurposes(TSS&TP)specificationfortheuser";Part4:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationfortheuser";Part5:"TestSuiteStructureandTestPurposes(TSS&TP)specificationforthenetwork";Part6:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecificationforthenetwork".NationaltranspositiondatesDateofadoptionofthisEN:19May2000DateoflatestannouncementofthisEN(doa):31August2000DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):28February2001DateofwithdrawalofanyconflictingNationalStandard(dow):28February2001SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)61ScopeThepresentdocumentspecifiesthenetworkAbstractTestSuite(ATS)fortheTBreferencepointorcoincidentSBandTBreferencepoint(asdefinedinITU-TRecommendationI.413[9])ofimplementationsconformingtothestandardsforthesignallinguser-networklayer3specificationforbasiccall/bearercontroloftheDigitalSubscriberSignallingSystemNo.two(DSS2)protocolforthepan-EuropeanBroadbandIntegratedServicesDigitalNetwork(B-ISDN),EN300443-1[1].AfurtherpartofthepresentdocumentspecifiestheTestSuiteStructureandTestPurposes(TSS&TP)relatedtothisATSandpartialPIXITproforma.OtherpartsspecifytheTSS&TPandtheATSandpartialPIXITproformafortheUsersideoftheTBreferencepointorcoincidentSBandTBreferencepointofimplementationsconformingtoEN300443-1[1].2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN300443-1(V1.3):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part1:Protocolspecification[ITU-TRecommendationQ.2931(1995),modified]".[2]ETSIEN300443-2(V1.2):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part2:ProtocolImplementationConformanceStatement(PICS)proformaspecification".[3]ETSIEN300443-3(V1.1):"BroadbandIntegratedServicesDigitalNetwork(B-ISDN);DigitalSubscriberSignallingSystemNo.two(DSS2)protocol;B-ISDNuser-networkinterfacelayer3specificationforbasiccall/bearercontrol;Part3:TestSuiteStructureandTestPurposes(TSS&TP)specificationfortheuser".[4]ISO/IEC9646-1(1994):"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part1:Generalconcepts".[5]ISO/IEC9646-2(1994):"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part2:AbstractTestSuitespecification".[6]ISO/IEC9646-3(1998):"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part3:TheTreeandTabularCombinedNotation(TTCN)".[7]ISO/IEC9646-4(1994):"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part4:Testrealization".[8]ISO/IEC9646-5(1994):"Informationtechnology;OpenSystemsInterconnection;Conformancetestingmethodologyandframework;Part5:Requirementsontestlaboratoriesandclientsfortheconformanceassessmentprocess".[9]ITU-TRecommendationI.413(1993):"B-ISDNuser-networkinterface".SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)73Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:ImplementationUnderTest(IUT):seeISO/IEC9646-1[4]SystemUnderTest(SUT):seeISO/IEC9646-1[4]AbstractTestSuite(ATS):seeISO/IEC9646-1[4]ProtocolImplementationConformanceStatement(PICS):seeISO/IEC9646-1[4]PICSproforma:seeISO/IEC9646-1[4]ProtocolImplementationeXtraInformationforTesting(PIXIT):seeISO/IEC9646-1[4]PIXITproforma:seeISO/IEC9646-1[4]LowerTester(LT):seeISO/IEC9646-1[4]UpperTester(UT):seeISO/IEC9646-1[4]PointofControlandObservation(PCO):seeISO/IEC9646-1[4]3.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ATMAbstractTestMethodATSAbstractTestSuiteExTSExecutableTestSuiteIUTImplementationUnderTestLTLowerTesterMOTMeansOfTestingPCOPointofControlandObservationPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingPTCParallelTestComponentSUTSystemUnderTestTCPTestCo-ordinationProceduresTPTestPurposeTTCNTreeandTabularCombinedNotationUTUpperTesterSIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)84AbstractTestMethodTheremotetestmethodisappliedfortheuserATS.ThePointofControlandObservation(PCO)residesattheserviceaccesspointbetweenlayers2and3.ThisPCOisnamed"L0"(forLower).TheL0PCOisusedtocontrolandobservethebehaviouroftheImplementationUnderTest(IUT)andtestcaseverdictsareassigneddependingonthebehaviourobservedatthisPCO.TesterSUTLTIUTPCOLayer2Layer2Layer1Layer1ServiceproviderFigure1:RemotetestmethodISO/IEC9646-2[5]allowstheinformalexpressionofTestCo-ordinationProcedures(TCP)betweentheSystemUnderTest(SUT)upperlayer(s)andtheLowerTester(LT).IntheATScontainedinannexC,TCPisachievedbyuseofasecond"informal"PCO,called"O"(forOperator).ThisPCOisusedtospecifycontrolbutnotobservationabovetheIUTandconsequently,eventsatthisPCOareneverusedtogeneratetestcaseverdicts.TheuseofthisOPCOisregardedasapreferredalternativetotheuseoftheimplicitsendevent,inthatitallowstheATStospecifyinaclearandmeaningfulwaywhatactionsarerequiredtobeperformedontheIUT.5UntestabletestpurposesTherearenountestabletestpurposesassociatedwiththisATS.6ATStoTPmapTheidentifiersusedfortheTPs(seeEN300443-3[3])arereusedastestcasenames.Thusthereisastraightforwardone-to-onemapping.7PCTRconformanceAtestlaboratory,whenrequestedbyaclienttoproduceaPCTR,isrequired,asspecifiedinISO/IEC9646-5[8],toproduceaPCTRconformantwiththePCTRtemplategiveninannexBofISO/IEC9646-5[8].Furthermore,atestlaboratory,offeringtestingfortheATSspecificationcontainedinannexC,whenrequestedbyaclienttoproduceaPCTR,isrequiredtoproduceaPCTRconformantwiththePCTRproformacontainedinannexAofthepresentdocument.APCTRwhichconformstothisPCTRproformaspecificationshallpreservethecontentandorderingoftheclausescontainedinannexA.ClauseA.6ofthePCTRmaycontainadditionalcolumns.Ifincluded,theseshallbeplacedtotherightoftheexistingcolumns.Textinitalicsmayberetainedbythetestlaboratory.SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)98PIXITconformanceAtestrealizer,producinganexecutabletestsuitefortheAbstractTestSuite(ATS)specificationcontainedinannexC,isrequired,asspecifiedinISO/IEC9646-4[7],toproduceanaugmentedpartialPIXITproformaconformantwiththispartialPIXITproformaspecification.AnaugmentedpartialPIXITproformawhichconformstothispartialPIXITproformaspecificationshall,asaminimum,havecontentswhicharetechnicallyequivalenttoannexB.TheaugmentedpartialPIXITproformamaycontainadditionalquestionsthatneedtobeansweredinordertopreparetheMeansOfTesting(MOT)foraparticularImplementationUnderTest(IUT).Atestlaboratory,offeringtestingfortheATSspecificationcontainedinannexC,isrequired,asspecifiedinISO/IEC9646-5[8],tofurtheraugmenttheaugmentedpartialPIXITproformatoproduceaPIXITproformaconformantwiththispartialPIXITproformaspecification.APIXITproformawhichconformstothispartialPIXITproformaspecificationshall,asaminimum,havecontentswhicharetechnicallyequivalenttoannexB.ThePIXITproformamaycontainadditionalquestionsthatneedtobeansweredinordertopreparethetestlaboratoryforaparticularIUT.9ATSConformanceThetestrealizer,producingaMeansOfTesting(MOT)andExecutableTestSuite(ExTS)forthisAbstractTestSuite(ATS)specification,shallcomplywiththerequirementsofISO/IEC9646-4[7].Inparticular,theseconcerntherealizationofanExecutableTestSuite(ExTS)basedoneachATS.ThetestrealizershallprovideastatementofconformanceoftheMOTtothisATSspecification.AnExTSwhichconformstothisATSspecificationshallcontaintestgroupsandtestcaseswhicharetechnicallyequivalenttothosecontainedintheATSinannexC.Allsequencesoftesteventscomprisinganabstracttestcaseshallbecapableofbeingrealizedintheexecutabletestcase.AnyfurthercheckingwhichthetestsystemmightbecapableofperformingisoutsidethescopeofthisATSspecificationandshallnotcontributetotheverdictassignmentforeachtestcase.TestlaboratoriesrunningconformancetestservicesusingthisATSshallcomplywithISO/IEC9646-5[8].AtestlaboratorywhichclaimstoconformtothisATSspecificationshalluseanMOTwhichconformstothisATS.SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)10AnnexA(normative):ProtocolConformanceTestReport(PCTR)proformaNotwithstandingtheprovisionsofthecopyrightclauserelatedtothetextofthepresentdocument,ETSIgrantsthatusersofthepresentdocumentmayfreelyreproducethePCTRproformainthisannexsothatitcanbeusedforitsintendedpurposesandmayfurtherpublishthecompletedPCTR.A.1IdentificationsummaryA.1.1ProtocolconformancetestreportPCTRnumber:PCTRDate:CorrespondingSCTRnumber:CorrespondingSCTRdate:TestLaboratoryidentification:TestLaboratoryManager:Signature:A.1.2IUTidentificationName:Version:Protocolspecification:EN300443PICS:PreviousPCTRs(ifany)A.1.3TestingenvironmentPIXITReferencenumber:ATSSpecification:EN300443-4AbstractTestMethod:Remotetestmethod(seeISO/IEC9646-2)MeansofTestingidentification:Datesoftesting:ConformanceLogreference(s):RetentionDateforLogreference(s):SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)11A.1.4LimitsandreservationsAdditionalinformationrelevanttothetechnicalcontentsorfurtheruseofthetestreport,ortotherightsandobligationsofthetestlaboratoryandtheclient,maybegivenhere.Suchinformationmayincluderestrictiononthepublicationofthereport.A.1.5CommentsAdditionalcommentsmaybegivenbyeithertheclientorthetestlaboratoryonanyofthecontentsofthePCTR,forexample,tonotedisagreementbetweenthetwoparties.A.2IUTConformancestatusThisIUThasorhasnotbeenshownbyconformanceassessmenttobenon-conformingtothespecifiedprotocolspecification.Striketheappropriatewordsinthissentence.IfthePICSforthisIUTisconsistentwiththestaticconformancerequirements(asspecifiedinclauseA.3ofthisreport)andthereareno"FAIL"verdictstoberecorded(inclauseA.6)strikethewords"hasor",otherwisestrikethewords"orhasnot".A.3StaticconformancesummaryThePICSforthisIUTisorisnotconsistentwiththestaticconformancerequirementsinthespecifiedprotocol.Striketheappropriatewordsinthissentence.SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)12A.4DynamicconformancesummaryThetestcampaigndidordidnotrevealerrorsintheIUT.Striketheappropriatewordsinthissentence.Ifthereareno"FAIL"verdictstoberecorded(inclauseA.6ofthisreport)strikethewords"didor",otherwisestrikethewords"ordidnot".Summaryoftheresultsofgroupsoftests:.A.5StaticconformancereviewreportIfclauseA.3indicatesnon-conformance,thissubclauseitemizesthemismatchesbetweenthePICSandthestaticconformancerequirementsofthespecifiedprotocolspecification.A.6TestcampaignreportATSReferenceSelected?(Y/N)Run?(Y/N)VerdictObservationsL3BU_01_01L3BU_01_02L3BU_01_03L3BU_01_04L3BU_02_01L3BU_03_01L3BU_03_02L3BU_03_03L3BU_04_01L3BU_04_02L3BU_05_01L3BU_06_01L3BU_06_02L3BU_07_01L3BU_07_02L3BU_07_03L3BU_07_04L3BU_08_01L3BU_08_02L3BU_08_03L3BU_08_04L3BU_09_01SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)13ATSReferenceSelected?(Y/N)Run?(Y/N)VerdictObservationsL3BU_09_02L3BU_09_03L3BU_09_04L3BU_10_01L3BU_10_02L3BU_10_03L3BU_10_04L3BU_10_05L3BU_10_06L3BU_10_07L3BU_10_08L3BU_11_01L3BU_11_02L3BU_11_03L3BU_12_01L3BU_12_02L3BU_12_03L3BU_13_01L3BU_13_02L3BU_14_01L3BU_15_01L3BU_15_02L3BU_15_03L3BU_15_04L3BU_15_05L3BU_15_06L3BU_15_07L3BU_15_08L3BU_15_09L3BU_15_10L3BU_15_11L3BU_16_01L3BU_16_02L3BU_16_03L3BU_16_04L3BU_16_05L3BU_16_06L3BU_16_07L3BU_16_08L3BU_17_01L3BU_17_02L3BU_18_01L3BU_18_02L3BU_18_03L3BU_18_04L3BU_19_01L3BU_19_02L3BU_19_03L3BU_19_04L3BU_19_05L3BU_19_06L3BU_19_07L3BU_19_08L3BU_19_09L3BU_19_10L3BU_19_11L3BU_19_12L3BU_19_13L3BU_19_14L3BU_19_15L3BU_19_16L3BU_19_17L3BU_19_18SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)14ATSReferenceSelected?(Y/N)Run?(Y/N)VerdictObservationsL3BU_19_19L3BU_19_20L3BU_20_01L3BU_20_02L3BU_20_03L3BU_20_04L3BU_20_05L3BU_20_06L3BU_20_07L3BU_20_08L3BU_20_09L3BU_20_10L3BU_20_11L3BU_20_12L3BU_20_13L3BU_20_14L3BU_20_15L3BU_20_16L3BU_20_17L3BU_20_18L3BU_20_19L3BU_20_20L3BU_20_21L3BU_20_22L3BU_20_23L3BU_20_24L3BU_20_25L3BU_20_26L3BU_20_27L3BU_20_28L3BU_20_29L3BU_20_30L3BU_20_31L3BU_20_32L3BU_20_33L3BU_20_34L3BU_20_35L3BU_20_36L3BU_20_37L3BU_20_38L3BU_20_39L3BU_20_40L3BU_20_41L3BU_20_42L3BU_20_43L3BU_20_44L3BU_20_45L3BU_21_01L3BU_21_02L3BU_21_03L3BU_21_04L3BU_21_05L3BU_21_06L3BU_21_07L3BU_21_08L3BU_21_09L3BU_21_10L3BU_21_11L3BU_21_12L3BU_21_13L3BU_21_14L3BU_21_15L3BU_21_16SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)15ATSReferenceSelected?(Y/N)Run?(Y/N)VerdictObservationsL3BU_21_17L3BU_21_18L3BU_21_19L3BU_21_20L3BU_21_21L3BU_21_22L3BU_21_23L3BU_21_24L3BU_21_25L3BU_21_26L3BU_21_27L3BU_21_28L3BU_21_29L3BU_21_30L3BU_21_31L3BU_21_32L3BU_21_33L3BU_21_34L3BU_21_35L3BU_21_36L3BU_21_37L3BU_22_01L3BU_22_02L3BU_22_03L3BU_22_04L3BU_22_05L3BU_22_06L3BU_22_07L3BU_22_08L3BU_22_09L3BU_22_10L3BU_22_11L3BU_22_12L3BU_22_13L3BU_22_14L3BU_22_15L3BU_22_16L3BU_22_17L3BU_22_18L3BU_22_19L3BU_22_20L3BU_22_21L3BU_22_22L3BU_22_23L3BU_22_24L3BU_22_25L3BU_22_26L3BU_22_27L3BU_22_28L3BU_22_29L3BU_22_30L3BU_22_31L3BU_22_32L3BU_23_01L3BU_23_02L3BU_23_03L3BU_23_04L3BU_23_05L3BU_23_06L3BU_23_07L3BU_23_08L3BU_23_09L3BU_23_10SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)16ATSReferenceSelected?(Y/N)Run?(Y/N)VerdictObservationsL3BU_23_11L3BU_23_12L3BU_23_13L3BU_23_14L3BU_23_15L3BU_23_16L3BU_23_17L3BU_23_18L3BU_23_19L3BU_23_20L3BU_23_21L3BU_23_22L3BU_23_23L3BU_23_24L3BU_23_25L3BU_23_26L3BU_23_27L3BU_23_28L3BU_23_29L3BU_23_30L3BU_23_31L3BU_23_32L3BU_24_01L3BU_24_02L3BU_24_03L3BU_24_04L3BU_24_05L3BU_24_06L3BU_24_07L3BU_24_08L3BU_24_09L3BU_24_10L3BU_24_11L3BU_24_12L3BU_24_13L3BU_24_14L3BU_24_15L3BU_24_16L3BU_24_17L3BU_24_18L3BU_24_19L3BU_24_20L3BU_24_21L3BU_24_22L3BU_24_23L3BU_25_01L3BU_25_02L3BU_25_03L3BU_25_04L3BU_25_05L3BU_25_06L3BU_25_07L3BU_25_08L3BU_25_09L3BU_25_10L3BU_25_11L3BU_25_12L3BU_25_13L3BU_25_14L3BU_25_15L3BU_25_16L3BU_25_17L3BU_25_18SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)17ATSReferenceSelected?(Y/N)Run?(Y/N)VerdictObservationsL3BU_25_19L3BU_25_20L3BU_25_21L3BU_25_22L3BU_25_23L3BU_25_24L3BU_25_25L3BU_25_26L3BU_25_27L3BU_25_28L3BU_25_29L3BU_25_30L3BU_25_31L3BU_25_32L3BU_25_33L3BU_25_34L3BU_25_35L3BU_25_36L3BU_25_37L3BU_26_01L3BU_26_02L3BU_26_03L3BU_26_04L3BU_26_05L3BU_26_06L3BU_26_07L3BU_26_08L3BU_26_09L3BU_26_10L3BU_26_11L3BU_26_12L3BU_26_13L3BU_26_14L3BU_26_15L3BU_26_16L3BU_26_17L3BU_26_18L3BU_26_19L3BU_26_20L3BU_26_21L3BU_26_22L3BU_26_23L3BU_27_01L3BU_27_02L3BU_27_03L3BU_27_04L3BU_27_05L3BU_27_06L3BU_27_07L3BU_27_08L3BU_27_09L3BU_27_10L3BU_27_11L3BU_27_12L3BU_27_13L3BU_27_14L3BU_27_15L3BU_27_16L3BU_27_17L3BU_27_18L3BU_27_19L3BU_27_20L3BU_27_21SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)18ATSReferenceSelected?(Y/N)Run?(Y/N)VerdictObservationsL3BU_27_22L3BU_27_23L3BU_27_24L3BU_27_25L3BU_27_26L3BU_27_27L3BU_27_28L3BU_27_29L3BU_27_30L3BU_27_31L3BU_27_32L3BU_27_33L3BU_27_34L3BU_27_35L3BU_27_36L3BU_27_37L3BU_27_38L3BU_27_39L3BU_28_01L3BU_28_02L3BU_28_03L3BU_28_04L3BU_28_05L3BU_28_06L3BU_28_07L3BU_28_08L3BU_28_09L3BU_28_10L3BU_28_11L3BU_28_12L3BU_28_13L3BU_28_14L3BU_28_15L3BU_28_16L3BU_28_17L3BU_28_18L3BU_28_19L3BU_28_20L3BU_28_21L3BU_28_22L3BU_28_23L3BU_28_24L3BU_28_25L3BU_28_26L3BU_28_27L3BU_28_28L3BU_28_29L3BU_28_30L3BU_28_31L3BU_28_32L3BU_28_33L3BU_28_34L3BU_28_35L3BU_28_36L3BU_28_37L3BU_28_38L3BU_29_01L3BU_29_02L3BU_29_03L3BU_29_04L3BU_29_05L3BU_29_06L3BU_29_07SIST EN 300 443-4:2003



ETSIETSIEN300443-4V1.1.2(2000-06)19ATSReferenceSelected?(Y/N)Run?(Y/N)VerdictObservationsL3BU_29_08L3BU_29_09L3BU_29_10L3BU_29_11L3BU_29_12L3BU_29_13L3BU_29_14L3BU_29_15L3BU_29_16L3BU_29_17L3BU_29_18L3BU_29_19L3BU_29_20L3BU_29_21L3BU_29_22L3BU_29_23L3BU_29_24L3BU_29_25L3BU_29_26L3BU_29_27L3BU_29_28L3BU_29_29L3BU_29_30L3BU_29_31L3BU_29_32L3BU_30_01L3BU_30_02L3BU_30_03L3BU_30_04L3BU_30_05L3BU_30_06L3BU_30_07L3BU_30_08L3BU_30_09L3BU_30_10L3BU_30_11L3BU_30_12L3BU_30_13L3BU_30_14L3BU_30_15L3BU_30_16L3BU_30_17L3BU_30_18L3BU_30_19L3BU_30_20L3BU_30_21L3BU_30_22L3BU_30_23L3BU_30_24L3BU_30_25L3BU_30_26L3BU_30_27L3BU_30_28L3BU_30_29L3BU_30_30L3BU_30_31L3BU_31_01L3BU_3
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.