ETSI EN 300 386 V1.3.2 (2003-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements
REN/ERM-EMC-224
Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Oprema za telekomunikacijsko omrežje - Zahteve za elektromagnetno združljivost (EMC)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Oprema za telekomunikacijsko omrežje - Zahteve za elektromagnetno združljivost (EMC)Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.050.01Telekomunikacijska terminalska oprema na splošnoTelecommunication terminal equipment in generalICS:Ta slovenski standard je istoveten z:EN 300 386 Version 1.3.2SIST EN 300 386 V1.3.2:2004en01-oktober-2004SIST EN 300 386 V1.3.2:2004SLOVENSKI
STANDARD
SIST EN 300 386 V1.3.2:2004
ETSI EN 300 386 V1.3.2 (2003-05)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Telecommunication network equipment;ElectroMagnetic Compatibility (EMC) requirements
SIST EN 300 386 V1.3.2:2004
ETSI ETSI EN 300 386 V1.3.2 (2003-05) 2
Reference REN/ERM-EMC-224 Keywords EMC, network, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 300 386 V1.3.2:2004
ETSI ETSI EN 300 386 V1.3.2 (2003-05) 3
Contents Intellectual Property Rights.6 Foreword.6 1 Scope.7 2 References.8 3 Definitions and abbreviations.11 3.1 Definitions.11 3.2 Abbreviations.12 4 Installation environment.13 5 Immunity: test methods.13 5.1 Electrostatic discharge.13 5.2 Electrical fast transients/burst.13 5.3 Surges.14 5.3.1 Outdoor signal line ports.14 5.3.2 Indoor signal line ports.14 5.3.3 AC power ports.14 5.4 Immunity to continuous conducted signals.14 5.4.1 Low frequency ( 150 kHz).14 5.4.2 Radio frequency (> 150 kHz).14 5.4.2.1 AC power port.14 5.4.2.2 DC power port.14 5.4.2.3 Signal line port.15 5.5 Immunity to radiated electromagnetic fields.15 5.6 Immunity to power supply disturbances: AC and DC power ports.15 5.6.1 Test of immunity to low frequency disturbances: AC power ports.15 6 Emission: test methods.15 6.1 AC power port.15 6.2 DC power port.15 6.3 Telecommunication Port.16 6.4 Radiated emission.16 7 Test levels and limits.17 7.1 Emission.17 7.1.1 Enclosure port, Radiated electromagnetic field emissions.17 7.1.2 AC ports.17 7.1.2.1 Conducted emissions.17 7.1.2.2 Current harmonics.17 7.1.2.3 Voltage fluctuations.17 7.1.3 DC ports; Conducted emissions.17 7.1.4 Telecommunication ports; Conducted emissions.17 7.2 Immunity.18 7.2.1 Equipment operating in telecommunication centres.18 7.2.1.1 Telecommunication centres, enclosure port.18 7.2.1.2 Telecommunication centres, ports for outdoor signal lines.19 7.2.1.3 Telecommunication centres, ports for indoor signal lines.20 7.2.1.4 Telecommunication centres, AC power ports.20 7.2.1.5 Telecommunication centres, DC power ports.21 7.2.2 Equipment operating in locations other than telecommunication centres.21 7.2.2.1 Other than telecommunication centres, enclosure port.21 7.2.2.2 Other than telecommunication centres, ports for outdoor signal lines.22 7.2.2.3 Other than telecommunication centres, ports for indoor signal lines.22 7.2.2.4 Other than telecommunication centres, AC power ports.23 7.2.2.5 Other than telecommunication centres, DC power ports.23 SIST EN 300 386 V1.3.2:2004
ETSI ETSI EN 300 386 V1.3.2 (2003-05) 4
8 General test configuration.24 9 General operational conditions during testing.24 9.1 Equipment configuration.24 9.2 Operation of multimedia network equipment.25 10 General immunity conditions.25 10.1 General performance criteria.25 11 Switching equipment specific requirements.26 11.1 Test configuration.26 11.2 Operational conditions.27 11.2.1 Emission.27 11.2.2 Immunity.27 11.3 Specific immunity performance criteria.27 11.3.1 Digital port performance criteria.27 11.3.1.1 Performance criterion A (continuous phenomena).27 11.3.1.2 Performance criterion B (transient phenomena).28 11.3.1.3 Performance criterion C (interruptions).28 11.3.2 Analogue port performance criteria.28 11.3.2.1 Performance criterion A (continuous phenomena).28 11.3.2.2 Performance criterion B (transient phenomena).28 11.3.2.3 Performance criterion C (interruptions).28 12 Transmission equipment specific requirements.28 12.1 Test configuration.28 12.2 Operational conditions.29 12.2.1 Emission.29 12.2.2 Immunity.29 12.3 Specific immunity performance criteria.29 12.3.1 Digital signal ports.29 12.3.1.1 Performance criterion A (continuous phenomena).30 12.3.1.2 Performance criterion B (transient phenomena).30 12.3.1.3 Performance criterion C (interruptions).30 12.3.2 Analogue voice frequency signal ports.30 12.3.2.1 Performance criterion A (continuous phenomena).30 12.3.2.2 Performance criterion B (transient phenomena).30 12.3.3 SDH and PDH interfaces.30 12.3.3.1 Tributary and aggregate interfaces.30 12.3.4 ISDN interfaces.31 12.3.4.1 Primary rate access ISDN interfaces.31 12.3.4.2 Network termination NT1 for ISDN "U" interfaces.31 12.3.4.3 Basic access ISDN interfaces.31 12.3.5 Analogue interfaces.31 12.3.5.1 Trunk interfaces and leased line interfaces.31 12.3.5.2 Subscriber interfaces.31 12.3.6 V.10, V.11, V.24, V.28, V.36, X.24 and similar V.- and X.- series interfaces.31 12.3.7 Ethernet and packet-data interfaces.31 12.3.7.1 Performance criterion A (continuous phenomena).31 12.3.7.2 Performance criterion B (transient phenomena).31 12.3.8 Service and maintenance interfaces.31 12.3.9 Synchronization interfaces.32 12.3.9.1 Performance criterion A (continuous phenomena).32 12.3.9.2 Performance criterion B (transient phenomena).32 12.3.10 Remote alarm interfaces.32 12.3.10.1 Performance criterion A (continuous phenomena).32 12.3.10.2 Performance criterion B (transient phenomena).32 13 Digital Subscriber Line (DSL) Access Systems.32 13.1 Test configuration.32 13.2 Operational conditions.33 13.2.1 Immunity.33 13.3 Specific Immunity performance criteria.33 SIST EN 300 386 V1.3.2:2004
ETSI ETSI EN 300 386 V1.3.2 (2003-05) 5
13.3.1 Performance Criteria A (continuous phenomena).33 13.3.2 Performance Criteria B (transient phenomena).34 13.3.3 Performance Criteria C (interruptions).34 14 Power supply equipment specific conditions.34 14.1 Test configuration.34 14.2 Operational conditions.35 14.2.1 Emission.35 14.2.2 Immunity.35 14.3 Specific immunity performance criteria.35 14.3.1 Alternating current secondary interface.36 14.3.1.1 Performance criterion A (continuous phenomena).36 14.3.1.2 Performance criterion B (transient phenomena).36 14.3.2 Direct current secondary interface.36 14.3.2.1 Performance criterion A (continuous phenomena).36 14.3.2.2 Performance criterion B (transient phenomena).37 14.3.3 Control/signal interface.37 14.3.4 Tertiary supply interface.37 15 Supervisory equipment specific conditions.37 15.1 Test configuration.37 15.2 Operational conditions.38 15.3 Specific immunity and resistibility performance criteria.38 15.3.1 Performance criterion A (continuous phenomena).38 15.3.2 Performance criterion B (transient phenomena).39 Annex A (normative): Surges: test method for ports of signal lines remaining within the building.40 A.1 Test set-up for ports with ISDN interface.40 Annex B (informative): Evaluation of test results.43 Annex C (informative): Guidance on EMC performance requirements and methods of measurement for RF ports (in the sense of EN 50083 series) of multimedia network equipment.45 Annex D (informative): The EN title in the official languages.46 History.47
SIST EN 300 386 V1.3.2:2004
ETSI ETSI EN 300 386 V1.3.2 (2003-05) 6
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [43] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Council Directive on the approximation of the laws of the Member States relating to electromagnetic compatibility ("the EMC Directive") (89/336/EEC [41] as amended).
National transposition dates Date of adoption of this EN: 25 April 2003 Date of latest announcement of this EN (doa): 31 July 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2004 Date of withdrawal of any conflicting National Standard (dow): 31 July 2006
SIST EN 300 386 V1.3.2:2004
ETSI ETSI EN 300 386 V1.3.2 (2003-05) 7
1 Scope The present document covers the EMC requirements for equipment intended to be used within a telecommunications network (as defined in clause 3). Examples of such equipment are: • Switching equipment. Such equipment includes: - local telephone exchanges; - remote switching concentrators; - international switches; - telex switches; - network packet switches. • General purpose equipment, which is used as a part of a switching system, may be covered by the scope of other standards. For such equipment, if those other standards fully cover all the requirements of the present document, no further requirements are necessary. Switching equipment can also contain transmission functions, and this has to be recognized during testing. • Non-radio transmission equipment and ancillary equipment. Such equipment includes: - multiplexers; - line equipment and repeaters, e.g. equipment for: - Synchronous Digital Hierarchy (SDH); - Plesiochronous Digital Hierarchy (PDH); - Asynchronous Transfer Mode (ATM); such as: - Digital Cross Connect systems; - network terminations; - transmission equipment used in the access network like XDSL. • Power supply equipment. Such equipment includes: - central power plant; - end of suite power supplies; - uninterruptible power supplies; - stabilized AC power supplies; - and other dedicated telecommunication network power supplies; but excludes equipment which is uniquely associated with or integrated in other equipment. SIST EN 300 386 V1.3.2:2004
ETSI ETSI EN 300 386 V1.3.2 (2003-05) 8
• Supervisory equipment. Such equipment includes: - network management equipment; - operator access maintenance equipment; - traffic measurement systems; - line test units; - functional test units. The function of supervision may either be performed by independent equipment or form part of other telecommunication equipment. If the function of supervision forms part of a telecommunication equipment, the performance may be evaluated simultaneously with other functions (such as switching and transmission) during EMC testing. The environmental classification used in the present document refers to TR 101 651 [42]. The requirements of the present document have been selected to ensure an adequate level of immunity for the apparatus covered by the scope of the present document. The levels do not, however, cover extreme cases which may occur at any location but with a low probability of occurrence. In special cases, situations may arise where the levels of disturbance may exceed the immunity test levels specified in the present document. In these instances, special mitigation measures may have to be employed. Equipment for cabled distribution systems intended only for television and sound signals as defined in EN 50083-2 [3] and optical amplifiers as defined in ITU-T Recommendations G.661 [23] and G.662 [24] are outside the scope of the present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. [1] CISPR 16-1: "Specification for radio disturbance and immunity measuring apparatus and methods; Part 1: Radio disturbance and immunity measuring apparatus". [2] EN 50082-1 (1997): "Electromagnetic compatibility - Generic immunity standard -
Part 1: Residential, commercial and light industry". [3] EN 50083-2 (1995): "Cable networks for television signals, sound signals and interactive
services - Part 2: Electromagnetic compatibility for equipment". [4] EN 55022 (1998): "Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement". [5] EN 61000-3-2 (2000): "Electromagnetic compatibility (EMC) - Part 3-2: Limits
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.