Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.2.1; Part 2: Test Suite Structure and Test Purposes (TSS&TP)

RTS/BRAN-004T002-2R5

General Information

Status
Published
Publication Date
10-Dec-2008
Current Stage
12 - Completion
Due Date
20-Nov-2008
Completion Date
11-Dec-2008
Ref Project

Buy Standard

Standard
ETSI TS 102 385-2 V2.5.1 (2008-12) - Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.2.1; Part 2: Test Suite Structure and Test Purposes (TSS&TP)
English language
300 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 102 385-2 V2.5.1 (2008-12)
Technical Specification


Broadband Radio Access Networks (BRAN);
HiperMAN;
Conformance Testing for WiMAX/HiperMAN 1.2.1;
Part 2: Test Suite Structure and
Test Purposes (TSS&TP)

---------------------- Page: 1 ----------------------
2 ETSI TS 102 385-2 V2.5.1 (2008-12)



Reference
RTS/BRAN-004T002-2R5
Keywords
broadband, FWA, DLC, MAC, HiperMAN, radio,
testing, TSS&TP
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
© WIMAX Forum 2008.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 385-2 V2.5.1 (2008-12)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope.7
2 References.7
2.1 Normative references.7
2.2 Informative references.8
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Test Suite Structure (TSS).10
4.1 Structure.10
4.2 Test groups.11
4.2.1 Protocol services.11
4.2.1.1 Channel descriptors and maps.11
4.2.1.2 Radio Link Control (RLC) .11
4.2.1.3 Registration, IP connectivity, and TFTP.11
4.2.1.4 Privacy and key management.11
4.2.1.5 Dynamic services.11
4.2.1.6 Bandwidth allocation and polling .11
4.2.1.7 Reset and re-registration .12
4.2.1.8 Clock comparison.12
4.2.1.9 MAC PDU Construction .12
4.2.1.10 Packet convergence sublayer .12
4.2.1.11 DLC MAC Sublayer.12
4.2.2 Main test types.12
4.2.2.1 Valid Behaviour (BV) tests.12
4.2.2.2 Invalid Behaviour (BI) tests .12
4.2.2.3 inOpportune Behaviour (BO) tests.12
4.2.2.4 TImer and counter (TI) tests.12
5 Test Purposes (TP).13
5.1 Introduction.13
5.1.1 TP definition conventions.13
5.1.2 TP Identifier naming conventions.13
5.1.3 Sources of TP definitions.14
5.2 Test purposes for BS (BS).15
5.2.1 Channel Descriptors and Maps (CDM) .15
5.2.1.1 Map and Frame Structure (MAP).15
5.2.1.2 Channel Descriptors (CD).17
5.2.1.3 Channel Descriptor Change (CDC).19
5.2.1.3.1 UpLink (UL).19
5.2.1.3.2 DownLink (DL).20
5.2.2 Radio Link Control (RLC).21
5.2.2.1 Initial Ranging (IRNG) .21
5.2.2.2 Periodic Ranging (PRNG).26
5.2.2.3 Downlink Burst Profile Management (DBPC).29
5.2.2.3.1 To a Less Robust Profile (LRP) .29
5.2.2.3.2 To a More Robust Profile (MRP) .30
5.2.2.4 Negotiate Basic Capabilities (SBC) .30
5.2.3 Registration, IP Connectivity, and Parameter Transfer (INI) .31
5.2.3.1 Registration (REG).31
5.2.3.2 IP Connectivity (IPC).33
5.2.4 Privacy and Key Management (PKM).35
5.2.4.1 Authentication/Authorization (AUTH).35
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 385-2 V2.5.1 (2008-12)
5.2.4.1.1 Initialization (INIT).35
5.2.4.1.2 OPeratioNal (OPN).40
5.2.4.2 Encryption Key Transfer (TEK) .42
5.2.4.2.1 Initialization (INIT).42
5.2.4.2.2 Operational (OPN).44
5.2.4.3 Security Association Management (SAM).46
5.2.4.4 Encryption and Key Scheduling (EKS).47
5.2.4.4.1 Key Usage (KU).49
5.2.4.4.2 Encryption (ENC).50
5.2.4.4.3 Decryption (DEC).52
5.2.4.5 Certificates (CERT).54
5.2.5 Dynamic Services (DS).54
5.2.5.1 Dynamic Services Addition (DSA).54
5.2.5.2 Dynamic Services Change (DSC) .67
5.2.5.3 Dynamic Services Deletion (DSD) .83
5.2.5.4 QoS Parameter Sets (QPS).88
5.2.6 Bandwidth Allocation and Polling (BWA).94
5.2.6.1 Request/Grant (REQ).96
5.2.6.2 MultiCast Polling (MCP) .102
5.2.7 Reset and Re-Registration (RER) .105
5.2.8 CloCk Comparison (CCC).106
5.2.9 MAC PDU Construction (MAC).107
5.2.9.1 PACKing (PACK).109
5.2.9.2 Fragmentation (FRAG).111
5.2.9.3 PDU Concatenation (CAT) .113
5.2.9.4 Cyclic Redundancy Check (CRC).114
5.2.9.5 ARQ (ARQ).115
5.2.9.5.1 Setup (SET).115
5.2.9.5.2 Reset (RE).117
5.2.9.5.3 Receive Data (RXD).120
5.2.9.5.4 Transmit Data (TXD) .124
5.2.10 Packet Convergence Sublayer (PCS).129
5.2.10.1 Packet CS Usage (PCU).129
5.2.10.2 Classifier DSx Signaling (CDS).130
5.2.10.3 Classification (CLS).131
5.2.10.3.1 IPv4 and IPv6 (IP).133
5.2.10.3.2 Ethernet (ENET).135
5.2.10.3.3 VLAN (VLAN).136
5.2.10.3.4 IP over Ethernet (IPoE) .137
5.2.10.3.5 IP over VLAN (IPoV) .140
5.2.10.4 Payload Header Suppression (PHS).142
5.2.11 Service Flow Control (SF).145
5.2.12 Adaptive Antenna Support (AAS) .149
5.3 Test purposes for SS (SS).151
5.3.1 Channel Descriptors and Maps (CDM) .151
5.3.1.1 Map and Frame Structure (MAP).151
5.3.1.1.1 Initialization (INIT).151
5.3.1.1.2 Operational (OPN).153
5.3.1.1.3 Relevance (RLV).154
5.3.1.2 Channel Descriptors (CD).155
5.3.1.3 Channel Descriptor Change (CDC).156
5.3.1.3.1 Uplink (UL).156
5.3.1.3.2 Downlink (DL).158
5.3.2 Radio Link Control (RLC).159
5.3.2.1 Initial Ranging (IRNG) .159
5.3.2.2 Periodic Ranging (PRNG).163
5.3.2.3 Downlink Burst Profile Management (DBPC).174
5.3.2.3.1 To a Less Robust Profile (LRP) .174
5.3.2.3.2 To a More Robust Profile (MRP) .176
5.3.2.4 Negotiate Basic Capabilities (SBC) .180
5.3.3 Registration, IP Connectivity, and Parameter Transfer (INI) .181
5.3.3.1 Registration (REG).181
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 385-2 V2.5.1 (2008-12)
5.3.3.2 IP Connectivity (IPC).184
5.3.4 Privacy and Key Management (PKM).186
5.3.4.1 Authentication/Authorization (AUTH).186
5.3.4.1.1 Initialization (INIT).186
5.3.4.1.2 Operational (OPN).191
5.3.4.2 Encryption Key Transfer (TEK) .195
5.3.4.2.1 Initialization (INIT).195
5.3.4.2.2 Operational (OPN).198
5.3.4.3 Security Association Management (SAM).206
5.3.4.4 Encryption and Key Scheduling (EKS).206
5.3.4.4.1 Key Usage (KU).207
5.3.4.4.2 Encryption (ENC).208
5.3.4.4.3 Decryption (DEC).212
5.3.4.5 Certificates (CERT).215
5.3.5 Dynamic Services (DS).220
5.3.5.1 Dynamic Services Addition (DSA).220
5.3.5.2 Dynamic Services Change (DSC) .232
5.3.5.3 Dynamic Services Deletion (DSD) .246
5.3.5.4 Qos Parameter Sets (QPS) .249
5.3.6 Bandwidth Allocation and Polling (BWA).251
5.3.6.1 Request/Grant (REQ).251
5.3.6.2 Multicast Polling (MCP).256
5.3.7 Reset and Re-registration (RER) .258
5.3.8 Clock Comparison (CCC).260
5.3.9 MAC PDU Construction (MAC).260
5.3.9.1 Packing (PACK).263
5.3.9.2 Fragmentation (FRAG).264
5.3.9.3 PDU Concatenation (CAT) .266
5.3.9.4 Cyclic Redundancy Check (CRC).266
5.3.9.5 ARQ (ARQ).267
5.3.9.5.1 Setup (SET).267
5.3.9.5.2 Reset (RE).270
5.3.9.5.3 Receive Data (RXD).273
5.3.9.5.4 Transmit Data (TXD) .275
5.3.10 Packet Convergence Sublayer (PCS).280
5.3.10.1 Packet CS Usage (PCU).280
5.3.10.2 Classifier DSx Signaling (CDS).281
5.3.10.3 Classification (CLS).282
5.3.10.3.1 IPv4 and IPv6 (IP).282
5.3.10.3.2 Ethernet (ENET).284
5.3.10.3.3 VLAN (VLAN).285
5.3.10.3.4 IP over Ethernet (IPoE) .286
5.3.10.3.5 IP over VLAN (IPoV) .289
5.3.10.4 Payload Header Suppression (PHS).291
5.3.11 Service Flow Control (SF).293
5.3.12 Adaptive Antenna Support (AAS) .297
Annex A (informative): Bibliography.299
History .300

ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 385-2 V2.5.1 (2008-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Broadband Radio Access
Networks (BRAN).
The present document is part 2 of a multi-part deliverable covering Broadband Radio Access Networks (BRAN);
HiperMAN; Conformance Testing for WiMAX/HiperMAN 1.2.1, as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS) proforma";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP)";
Part 3: "Abstract Test Suite (ATS)".
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 385-2 V2.5.1 (2008-12)
1 Scope
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN
HiperMAN 1.2.1 Data Link Control (DLC) layer.
The objective of this test specification is to provide a basis for conformance tests for HiperMAN equipment giving a
high probability of air interface inter-operability between different manufacturers' HiperMAN equipment.
The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as
the ETSI rules for conformance testing (ETS 300 406 [4]) are used as a basis for the test methodology.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the purposes
of the referring document;
- for informative references.
Referenced documents which are
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.