ETSI ETS 300 177 ed.2 (1995-01)
Terminal Equipment (TE); Videotex; Photographic Syntax
Terminal Equipment (TE); Videotex; Photographic Syntax
RE/TE-01055
Terminalska oprema (TE) – Videotex – Fotografska skladnja
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ETS 300 177 E2:2003
01-december-2003
Terminalska oprema (TE) – Videotex – Fotografska skladnja
Terminal Equipment (TE); Videotex; Photographic Syntax
Ta slovenski standard je istoveten z: ETS 300 177 Edition 2
ICS:
33.160.99 Druga avdio, video in Other audio, video and
avdiovizuelna oprema audiovisual equipment
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST ETS 300 177 E2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 177 E2:2003
---------------------- Page: 2 ----------------------
SIST ETS 300 177 E2:2003
EUROPEAN ETS 300 177
TELECOMMUNICATION January 1995
STANDARD Second Edition
Source: ETSI TC-TE Reference: RE/TE-01055
ICS: 33.040.40
Videotex, Photographic Syntax
Key words:
Terminal Equipment (TE);
Videotex;
Photographic Syntax
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1995. All rights reserved.
New presentation - see History box
---------------------- Page: 3 ----------------------
SIST ETS 300 177 E2:2003
Page 2
ETS 300 177: January 1995
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 177 E2:2003
Page 3
ETS 300 177: January 1995
Contents
Foreword .9
1 Scope .11
2 Normative references.11
3 Definitions, symbols and abbreviations.12
3.1 Definitions .12
3.2 Symbols and abbreviations.16
4 Overview .17
5 ISO/IEC 9281, Part 1, syntax and switching structure .17
5.1 Overall switching of coding environment .17
5.2 Switching into the photographic mode.19
5.3 ISO/IEC 9281, Part 1, syntax structure.19
5.3.1 General use of the Length Indicator (LI).20
5.3.2 Use of the Picture Identifier (PI) code .20
6 Coding of the Picture Data Entity (PDE) .21
6.1 Introduction .21
6.2 PDE data content identification mechanism .21
7 Photographic header.23
7.1 Introduction .23
7.2 Header structure .23
7.3 Header functionalities .26
7.3.1 Parameter Status Attribute .26
7.3.1.1 Reset To Default .26
7.3.2 Picture Display Attributes .26
7.3.2.1 Full Screen Display .28
7.3.2.2 Source spect Ratio .28
7.3.2.3 Photo-area LOCation .28
7.3.2.4 Photo-Area Size .28
7.3.2.5 Picture PLacement .29
7.3.2.6 Clear Photo-Area .31
7.3.3 Source Picture Attributes .31
7.3.3.1 Source Picture Comments .31
7.3.3.2 Source Picture Dimensions .33
7.3.3.3 Source PIxel Density .33
7.3.3.4 Source SWeep Direction .34
7.3.3.5 DC Images .34
7.3.4 Source Signal Attributes .35
7.3.4.1 Source Component Description .35
7.3.4.2 Source Component Data Precision .35
7.3.4.3 Source Component Order .36
7.3.4.4 Source Level Assignment .36
7.3.5 Source Coding Algorithm Attributes .37
7.3.5.1 JPEG Coding Mode .37
7.3.5.2 Encoding Table Management .39
7.3.5.3 Application Marker codes Assignment .40
7.3.5.4 T4 Coding Mode .41
7.3.5.5 T6 Coding Mode .41
7.3.6 Transmission Channel Attributes .41
7.3.6.1 Translation Mode Encoding .42
---------------------- Page: 5 ----------------------
SIST ETS 300 177 E2:2003
Page 4
ETS 300 177: January 1995
8 Coding rules. 42
8.1 Purpose. 42
8.2 General rules for coding the header. 42
8.3 Photographic header code assignment. 49
8.3.1 Attribute codes. 49
8.3.2 Parameter codes . 49
8.3.2.1 Parameter Status Attribute. 49
8.3.2.2 Picture display attributes . 49
8.3.2.3 Source picture attributes . 49
8.3.2.4 Source signal attributes. 50
8.3.2.5 Source coding algorithm attributes . 50
8.3.2.6 Transmission channel attributes . 50
8.3.3 Sub-parameter codes . 50
8.4 Encoding of photographic header parameters. 50
8.4.1 Parameter Status Attribute: . 50
8.4.1.1 Reset To Default . 50
8.4.2 Picture Display Attributes . 50
8.4.2.1 Full Screen Display . 50
8.4.2.2 Source ASpect Ratio . 51
8.4.2.3 Photo-area LOCation . 51
8.4.2.4 Photo-Area Size . 51
8.4.2.5 Picture PLacement . 51
8.4.2.6 Clear Photo-Area . 51
8.4.3 Source Picture Attributes . 52
8.4.3.1 Source Picture Comments . 52
8.4.3.2 Source Picture Dimensions . 52
8.4.3.3 Source PIxel Density . 53
8.4.3.4 Source SWeep Direction . 53
8.4.3.5 DC Images . 53
8.4.4 Source Signal Attributes . 54
8.4.4.1 Source Component Description . 54
8.4.4.2 Source Component Data Precision . 54
8.4.4.3 Source Component Order . 54
8.4.4.4 Source Level ASsignment . 54
8.4.5 Source Coding Algorithm Attributes . 55
8.4.5.1 JPEG Coding Mode . 55
8.4.5.2 Encoding Table Management . 55
8.4.5.3 Application Marker codes Assignment . 56
8.4.5.4 T4 Coding Mode . 56
8.4.5.5 T6 Coding Mode . 56
8.4.6 Transmission Channel Attributes . 57
8.4.6.1 Translation Mode Encoding . 57
9 Photographic data. 57
9.1 Introduction. 57
9.2 Translation modes. 57
10 Defaults. 58
10.1 Default values for photographic header attributes . 58
10.1.1 Default parameter status attribute . 58
10.1.2 Default picture display attributes. 58
10.1.3 Default source picture attributes. 58
10.1.4 Default source signal attributes . 59
10.1.5 Default source coding algorithm attributes . 59
10.1.6 Default transmission channel attributes. 60
10.1.7 Default application marker code assignment. 60
10.2 Default tables . 60
10.2.1 Default quantization tables. 60
10.2.1.1 Default quantization tables for CIF images . 60
10.2.1.2 Default quantization tables for 2:1:1 images. 60
10.2.1.3 Default quantization tables for 4:2:2 images. 61
10.2.2 Default Huffman tables . 61
10.2.2.1 Default Huffman table for luminance DC differences . 62
---------------------- Page: 6 ----------------------
SIST ETS 300 177 E2:2003
Page 5
ETS 300 177: January 1995
10.2.2.2 Default Huffman table for chrominance DC differences.62
10.2.2.3 Default Huffman table for luminance AC coefficients.63
10.2.2.4 Default Huffman table for chrominance AC coefficients.66
11 Photographic profiles.69
11.1 Compatible photographic profiles (P1 to P5) .71
11.1.1 Profile P1.71
11.1.2 Profile P2.72
11.1.3 Profile P3.72
11.1.4 Profile P4.73
11.1.5 Profile P5.73
11.2 Private choice of photographic profile (P ) .73
priv
Annex A (informative): Photovideotex tutorial .75
A.1 Introduction.75
A.2 The present state of photovideotex.75
A.3 Image representation .76
A.4 The JPEG compression technique.77
A.4.1 Lossy and lossless compression .77
A.4.2 Modes of encoding.78
A.4.3 The DCT-based coding.79
A.4.3.1 The discrete cosine transform.80
A.4.3.2 Quantization .81
A.4.3.3 Huffman coding [A8].82
A.4.3.3.1 PCM encoding of the DC coefficients.83
A.4.3.3.2 Zigzag Ordering of AC Coefficients .83
A.4.4 Lossless coding .84
A.4.5 Source images and data interleaving.84
A.4.6 Data organisation and signalling parameters .84
A.5 The baseline system .85
A.6 The extended system.85
A.6.1 Coding model for successive approximation .85
A.6.2 Coding model for spectral selection.85
A.6.3 Hierarchical encoding .86
A.7 Summary.86
A.8 Bibliography.86
Annex B (informative): Implementation guidelines on display rendering .87
B.1 Introduction.87
B.2 Rendering of resolution .87
B.2.1 Resolution independence .87
B.2.2 Display rendering guidelines for Data Syntax II profiles .89
B.2.2.1 Pixel alignment .89
B.2.2.1.1 CCIR Recommendation 601, Part 1 4:2:2 resolution .89
B.2.2.1.2 CCIR Recommendation 601, Part 1 2:1:1 resolution .89
B.2.2.1.3 CIF format.89
B.2.2.1.4 QCIF format.89
B.2.2.2 Adjustment of horizontal resolution .90
B.2.2.2.1 "Adding" pixels.90
B.2.2.2.2 "Removing" pixels.90
B.3 The concept of normalised colour space .91
---------------------- Page: 7 ----------------------
SIST ETS 300 177 E2:2003
Page 6
ETS 300 177: January 1995
Annex C (informative): Solutions for common compatible photovideotex databases serving different
resolution terminals. 92
C.1 Introduction. 92
C.2 Hierarchical mode. 92
C.2.1 Coding. 92
C.2.2 Decoding . 94
C.2.3 Example for a "resolution pyramid" for hierarchical build-up. 94
C.2.3.1 Advantages of the suggested technique. 95
C.2.3.1.1 Independence of transmission, decompression and
display . 95
C.2.3.1.2 Independence of image resolution from the terminal
resolution. 95
C.2.3.1.3 Storage gain in the database host through the pyramidal
database . 95
C.2.3.2 Disadvantages . 95
C.3 Special spectral selection . 96
C.3.1 Coding. 96
C.3.2 Decoding . 97
Annex D (informative): Coding examples . 99
D.1 Introduction. 99
D.1.1 Example 1 . 99
D.1.2 Example 2 . 100
D.1.3 Example 3 . 103
D.2 Image positioning examples . 104
D.2.1 Example 1: 640 X 480 picture inside DDA . 104
D.2.2 Example 2: 720 X 576 picture full screen. 105
D.2.3 Example 3: 720 X 346 picture covering upper 60% of full screen . 106
D.3 Example for Source Picture Comments (PCT). 106
D.3.1 An application scenario . 106
D.3.2 Sample logical record of a Source picture: . 107
Annex E (informative): ETSI/ITU-T-CCITT Cross-reference list . 109
Annex F (normative): Encoding parameters values for the 2:1:1. 110
F.1 Introduction. 110
F.2 Encoding parameters for 2:1:1 . 110
F.2.1 Main body of CCIR Recommendation 601, Part 1 . 110
F.2.2 Annex I of the CCIR Recommendation 601, Part 1 . 110
F.2.3 Annex II of the CCIR Recommendation 601, Part 1 . 110
F.2.3.1 Relationship of active line to analogue synchronisation reference . 110
F.2.3.2 Definition of the digital signals Y, C , C , from the primary (analogue)
B R
signals E' , E' and E' . 111
R G B
F.2.4 Annex III of the CCIR Recommendation 601. 111
Annex G (normative): Translation modes . 117
G.1 Mode 0 (No translation, full transparency). 117
G.2 Mode 2 (3-in-4 coding). 117
G.3 Mode 4 (Shift scheme - 7 bits). 118
Annex H (informative): Huffman tables for the "special spectral selection". 119
---------------------- Page: 8 ----------------------
SIST ETS 300 177 E2:2003
Page 7
ETS 300 177: January 1995
H.1 Introduction.119
H.2 Spectral bands .119
H.3 Luminance DC differences.119
H.3.1 List of codelengths.119
H.3.2 List of values.119
H.4 Chrominance DC differences.120
H.4.1 List of codelengths.120
H.4.2 List of values.120
H.5 Luminance AC coefficients.120
H.5.1 List of codelengths.120
H.5.2 List of values.121
H.6 Chrominance AC coefficients.124
H.6.1 List of codelengths.124
H.6.2 List of values.124
Annex J (informative): Examples of local presentation facilities with T4 and T6 encoded data.129
J.1 Local presentation facilities .129
J.2 Local presentation modes .129
J.2.1 Full View Mode .129
J.2.2 Full Width Mode.130
J.2.3 Full Height Mode.130
J.2.4 Original Size Mode.130
J.2.5 Terminal Dependant Mode .131
History.132
---------------------- Page: 9 ----------------------
SIST ETS 300 177 E2:2003
Page 8
ETS 300 177: January 1995
Blank page
---------------------- Page: 10 ----------------------
SIST ETS 300 177 E2:2003
Page 9
ETS 300 177: January 1995
Foreword
This second edition European Telecommunication Standard (ETS) has been prepared by the Terminal
Equipment (TE) Technical Committee of the European Telecommunications Standards Institute (ETSI) in
order to specify a new common data syntax for transmitting photographic images to be used by Videotex
terminal equipment. It is now submitted under the Unified Approval Procedure (UAP) of the ETSI
standards approval procedure.
This ETS is part of a series of ETSs which describe the Videotex presentation layer data syntax.
This ETS defines a data syntax to be used for conveying photographic data in a Videotex environment.
The necessary tools are provided for the transfer of photographic data, typically from a Videotex Host to a
Videotex terminal. This data syntax is equally applicable to either storage or communication applications
and is independent of physical device or transmission media.
This ETS does not deal with the visible appearance of the displayed pictures, however all the necessary
source image information is provided to make the proper physical adaptation at the receiving side. The
specification of post-processing techniques is left to the implementors and is, therefore, outside the scope
of this ETS.
More precisely, this ETS defines the syntax and semantics of image data and image attributes for
photographic Videotex interchange purpose
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.