ETSI ES 201 468 V1.7.1 (2023-01)
Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applications
Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility requirements for telecommunications equipment for enhanced availability of service in specific applications
RES/ERM-EMC-411
Dodatne zahteve za elektromagnetno združljivost (EMC) in odpornost telekomunikacijske opreme za povečano razpoložljivost storitve v posebnih oblikah uporabe
Ta dokument obravnava zahteve glede sevanja in odpornosti za telekomunikacijsko opremo, kadar se zahteva večja učinkovitost, da lahko operaterji zagotovijo povečano razpoložljivost storitve v posebnih oblikah uporabe. Okolja, zajeta v tem dokumentu, so opredeljena v standardu ETSI TR 101 651 [i.5] in vključujejo: • telekomunikacijske centre (razredi 1 in 2 standarda ETSI TR 101 651 [i.5]); • lokacije, ki niso telekomunikacijski centri (razredi 3 in 4 standarda ETSI TR 101 651 [i.5]). Podatkovni centri in podobni objekti se prav tako smatrajo kot telekomunikacijski centri, pri čemer se nahajajo v namenskem prostoru skupaj s strežniki, napravami za shranjevanje in povezano telekomunikacijsko opremo. Upoštevajoč dejstvo, da vse vrste opreme niso enako pomembne, so dve kategoriji opreme in povezane zahteve za elektromagnetno združljivost predstavljene z oznako: • raven 1 (glej preglednice v točkah 9.1.1.1 do 9.1.1.5 in 9.2.1.1 do 9.2.1.5); • raven 2 (glej preglednice v točkah 9.1.2.1 do 9.1.2.5 in 9.2.2.1 do 9.2.2.5); pri čemer slednja vsebuje kompleksnejše zahteve. Ustrezno raven naj izbere operater ob upoštevanju posledic odpovedi opreme, ki lahko povzročijo zmanjšano delovanje, izgubo storitve, neizpolnjevanje pogodbenih obveznosti ali slabo reklamo in izgubo ugleda. Ta dokument se uporablja za vse vrste opreme, navedene v nadaljevanju: • stikalna oprema, ki vključuje medkrajevne in krajevne telefonske centrale, daljinske stikalne koncentratorje, mednarodna stikala, teleks stikala in omrežna paketna stikala, krmilnike baznih postaj, krmilnike radijskih omrežij, omrežne strežnike in prehode; • oprema za prenos, ki vključuje multiplekserje, linijsko opremo in ponavljalnike, sinhrono digitalno hierarhijo (SDH), digitalno prevezovanje (DXC), asinhroni prenosni način (ATM) in omrežne zaključke, opremo za prenos, ki se uporablja v dostopovnem omrežju, kot je xDSL; • napajalna oprema, ki vključuje centralno elektrarno, električno napajanje na koncu niza, sisteme za upravljanje porabe in druge namenske telekomunikacijske omrežne napajalnike; • nadzorna oprema ter namenska oprema za delovanje in vzdrževanje (OAM); • oprema za določanje tarif in zaračunavanje; • oprema za podatkovne centre, ki vključuje: prostor za shranjevanje, procesor in strežnik za uporabo znotraj infrastrukture telekomunikacijskega omrežja.
General Information
Buy Standard
Standards Content (Sample)
ETSI ES 201 468 V1.7.1 (2023-01)
ETSI STANDARD
Additional ElectroMagnetic Compatibility (EMC)
requirements and resistibility requirements for
telecommunications equipment for enhanced availability
of service in specific applications
---------------------- Page: 1 ----------------------
2 ETSI ES 201 468 V1.7.1 (2023-01)
Reference
RES/ERM-EMC-411
Keywords
EMC, management, network, power supply,
switching, testing, transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
arranty is made of merchantability or fitness
and/or governmental rule and/or regulation and further, no representation or w
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI ES 201 468 V1.7.1 (2023-01)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 10
3.3 Abbreviations . 10
4 General operational conditions . 11
4.0 General requirements . 11
4.1 Equipment configuration . 11
4.2 Exercising equipment . 12
4.3 Laboratory environment . 12
5 General performance criteria for immunity tests . 12
5.0 General requirements . 12
5.1 Performance criterion A . 12
5.2 Performance criterion B . 12
5.3 Performance criterion C . 12
6 Immunity: test methods . 13
6.1 General . 13
6.2 Electrostatic discharge . 13
6.3 Electrical fast transients/burst . 13
6.4 Surges . 13
6.4.1 Outdoor signal line ports . 13
6.4.2 Indoor signal line ports . 13
6.4.3 AC power line ports . 13
6.5 Immunity to continuous conducted signals . 13
6.5.1 AC power supply port . 13
6.5.2 DC power supply interface port . 13
6.5.3 Signal line port . 14
6.6 Immunity to radiated electromagnetic fields . 14
6.7 Immunity to power supply disturbances: AC and DC ports . 14
6.7.1 Test of immunity to low frequency disturbances: AC ports . 14
6.7.2 Test of immunity to low frequency disturbances: DC ports . 14
6.8 Immunity to interference from permanent power induction . 14
6.9 Power frequency magnetic fields . 14
7 Resistibility: test methods . 15
7.1 Electrostatic discharge . 15
7.2 Lightning . 15
7.3 Power induction and earth potential rise . 15
7.4 Mains power contact . 15
8 Emission: test methods and limits . 15
9 Immunity requirements . 15
9.0 General requirements . 15
9.1 Equipment operating in telecommunication centres . 17
9.1.1 Telecommunication centres, level 1. 17
9.1.1.1 Telecommunication centres, enclosure port, level 1 . 17
ETSI
---------------------- Page: 3 ----------------------
4 ETSI ES 201 468 V1.7.1 (2023-01)
9.1.1.2 Telecommunication centres, ports for outdoor signal lines, level 1 . 17
9.1.1.3 Telecommunication centres, ports for indoor signal lines, level 1 . 18
9.1.1.4 Telecommunication centres, AC power ports, level 1 . 18
9.1.1.5 Telecommunication centres, DC power ports, level 1 . 18
9.1.2 Telecommunication centres, level 2. 18
9.1.2.1 Telecommunication centres, enclosure port, level 2 . 18
9.1.2.2 Telecommunication centres, ports for outdoor signal lines, level 2 . 19
9.1.2.3 Telecommunication centres, ports for indoor signal lines, level 2 . 19
9.1.2.4 Telecommunication centres, AC power ports, level 2 . 20
9.1.2.5 Telecommunication centres, DC power ports, level 2 . 21
9.2 Equipment operating in locations other than telecommunication centres . 21
9.2.1 Equipment operating in locations other than telecommunication centres, level 1 . 21
9.2.1.1 Other than telecommunication centres, enclosure port, level 1 . 21
9.2.1.2 Other than telecommunication centres, ports for outdoor signal lines, level 1 . 22
9.2.1.3 Other than telecommunication centres, ports for indoor signal lines, level 1 . 22
9.2.1.4 Other than telecommunication centres, AC power ports, level 1 . 22
9.2.1.5 Other than telecommunication centres, DC power ports, level 1 . 22
9.2.2 Equipment operating in locations other than telecommunication centres, level 2 . 23
9.2.2.1 Other than telecommunication centres, enclosure port, level 2 . 23
9.2.2.2 Other than telecommunication centres, ports for outdoor signal lines, level 2 . 24
9.2.2.3 Other than telecommunication centres, ports for indoor signal lines, level 2 . 25
9.2.2.4 Other than telecommunication centres, AC power ports, level 2 . 26
9.2.2.5 Other than telecommunication centres, DC power ports, level 2 . 26
10 Resistibility requirements . 27
Annex A (informative): Evaluation of test results . 28
Annex B (informative): Guidance for the product specific operational conditions and
performance criteria . 30
B.1 General . 30
B.2 Operational conditions and performance criteria during EMC tests . 30
B.2.1 General considerations . 30
B.2.2 Operational conditions during EMC tests . 31
B.2.3 Performance criteria during EMC tests . 31
B.2.4 Examples of specific performance criteria . 32
B.2.5 Example of additional performance criteria (and further details of requirements) for "primary rate
multiple access" equipment . 32
Annex C (informative): Bibliography . 33
History . 34
ETSI
---------------------- Page: 4 ----------------------
5 ETSI ES 201 468 V1.7.1 (2023-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio
spectrum Matters (ERM).
The present document defines the EMC requirements of telecommunication network equipment for an increased
reliability and the resistibility requirements.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document defines EMC requirements for telecommunications equipment to guarantee enhanced availability
of service in specific applications. Resistibility requirements are also defined with reference to ITU-T K series
recommendations.
ETSI
---------------------- Page: 5 ----------------------
6 ETSI ES 201 468 V1.7.1 (2023-01)
1 Scope
The present document covers the emission, immunity and resistibility requirements for telecommunications equipment
where higher performance is required by operators to guarantee enhanced availability of service in specific applications.
The environments considered in the present document are defined in ETSI TR 101 651 [i.5] and are:
• telecommunication centres (classes 1 and 2 of ETSI TR 101 651 [i.5]);
• locations other than telecommunication centres (classes 3 and 4 of ETSI TR 101 651 [i.5]).
Data centres and similar facilities are also considered telecommunication centres, where they are within a dedicated
room with servers, storage devices and associated telecommunication equipment.
Considering that all kinds of equipment are not equally important, two equipment categories and associated EMC
requirements are introduced and are designated as:
• level 1 (see tables in clauses 9.1.1.1 to 9.1.1.5 and 9.2.1.1 to 9.2.1.5);
• level 2 (see tables in clauses 9.1.2.1 to 9.1.2.5 and 9.2.2.1 to 9.2.2.5);
the latter containing the more demanding requirements.
The appropriate level should be chosen by the operator considering the consequences of failure of the equipment which
may lead to impaired function, loss of service, failure to meet contractual obligations or bad publicity and loss of
reputation.
The present document is applicable to all equipment types, examples of which are listed below:
• switching equipment which includes trunk and local telephone exchanges, remote switching concentrators,
international switches, telex switches and network packet switches, base station controllers, radio network
controllers, network servers and gateways;
• non-radio transmission equipment which includes multiplexers, line equipment and repeaters, Synchronous
Digital Hierarchy (SDH), Digital Cross Connect (DXC), Asynchronous Transfer Mode (ATM) and network
terminations, transmission equipment used in the access network like xDSL;
• power supply equipment which includes central power plant, end of suite power supplies, power management
systems and other dedicated telecommunications network power supplies;
• supervisory equipment and dedicated Operation And Maintenance (OAM) equipment;
• tariff and billing equipment;
• data centre equipment which includes: Storage, Processor, Server intended to be used within
telecommunication network infrastructure.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI ES 201 468 V1.7.1 (2023-01)
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 386 (V2.2.1): "Telecommunication network equipment; Harmonised Standard for
ElectroMagnetic Compatibility (EMC) requirements".
[2] EN 61000-4-2 (2009): "Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test" (produced by CENELEC).
[3] EN 61000-4-3 (2020): "Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test" (produced by
CENELEC).
[4] EN 61000-4-4 (2012): "Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test" (produced by CENELEC).
[5] EN 61000-4-5 (2014 + Amendment 1: 2017): "Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test" (produced by CENELEC).
[6] EN 61000-4-6 (2014): "Electromagnetic compatibility (EMC); Part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency fields" (produced by
CENELEC).
[7] EN 61000-4-8 (2010): "Electromagnetic compatibility (EMC); Part 4-8: Testing and measurement
techniques - Power frequency magnetic field immunity test" (produced by CENELEC).
[8] EN 61000-4-11 (2020): "Electromagnetic compatibility (EMC); Part 4-11: Testing and
measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
for equipment with input current up to 16 A per phase" (produced by CENELEC).
[9] Recommendation ITU-T K.54 (12/2004): "Conducted immunity test method and level at
fundamental power frequencies".
[10] Recommendation ITU-T K.20 (06/2021): "Resistibility of telecommunication equipment installed
in a telecommunications centre to overvoltages and overcurrents".
[11] Recommendation ITU-T K.21 (08/2022): "Resistibility of telecommunication equipment installed
in customer premises to overvoltages and overcurrents".
[12] Recommendation ITU-T K.45 (10/2019): "Resistibility of telecommunication equipment installed
in the access and trunk networks to overvoltages and overcurrents".
[13] EN 61000-4-34 (2007 + Amendment A1: 2009): "Electromagnetic compatibility (EMC) -
Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage
variations immunity tests for equipment with mains current more than 16 A per phase" (produced
by CENELEC).
[14] IEC 60050-714 (1992): "International Electrotechnical Vocabulary (IEV) - Part 714: Switching
and signalling in telecommunications".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-T K.44 (10-2019): "Resistibility tests for telecommunication equipment
exposed to overvoltages and overcurrents - Basic Recommendation".
ETSI
---------------------- Page: 7 ----------------------
8 ETSI ES 201 468 V1.7.1 (2023-01)
[i.2] ETSI EN 300 132-1 (V.2.1.1) (03-2019): "Environmental Engineering (EE); Power supply
interface at the input to Information and Communication Technology (ICT) equipment;
Part 1: Alternating Current (AC)".
[i.3] ETSI EN 300 132-2 (V2.7.1) (09-2022): "Environmental Engineering (EE); Power supply
interface at the input of Information and Communication Technology (ICT) equipment;
Part 2: -48 V Direct Current (DC)".
[i.4] IEC 60050-161 (1990): "International Electrotechnical Vocabulary (IEV); Part 161:
Electromagnetic compatibility".
[i.5] ETSI TR 101 651 (V2.1.1): "Classification of the electromagnetic environment conditions for
equipment in telecommunication networks".
[i.6] ETSI EN 300 132-3 (V2.2.1): "Environmental Engineering (EE); Power supply interface at the
input of Information and Communication Technology (ICT) equipment; Part 3: Up to 400 V
Direct Current (DC)".
[i.7] IEEE 1284™ (2000): "IEEE Standard Signalling Method for a Bidirectional Parallel Peripheral
Interface for Personal Computers".
[i.8] IEEE 1394™ (2008): "IEEE Standard for High Performance Serial Bus Bridges".
[i.9] Void.
[i.10] EN 55032 (2015 + Amendment A11: 2020 + Amendment A1: 2020): "Electromagnetic
compatibility of multimedia equipment - Emission requirements" (produced by CENELEC).
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in IEC 60050-161 [i.4] and the following apply:
NOTE: Where applicable, the clause number of IEC 60050-161 [i.4] is in parenthesis.
Audio (low) Frequency (AF): frequency interval from 0 Hz to 20 kHz
NOTE: It may sometimes be convenient to extend the use of this term to include the range of frequencies up to
150 kHz.
burst (161-02-07): sequence of a limited number of distinct pulses or an oscillation of limited duration
characteristic severity: characteristic severity for a certain detail parameter in an environmental class states a severity
which has only a low probability (generally less than 1 %) of being exceeded
NOTE: The term relates to duration, rate of occurrence or location. It applies to requirements on the environment
and to immunity requirements.
connection: temporary association of transmission channels or telecommunication circuits, switching or other
functional units set up to provide for the transfer of information between two or more points in a telecommunication
network (IEC 60050-714 [14])
continuous disturbance (161-02-11): electromagnetic disturbance the effects of which on a particular device or
equipment cannot be resolved into a succession of distinct effects
data centre: structure, or group of structures, dedicated to the centralized accommodation, interconnection and
operation of information technology and network telecommunications equipment providing data storage, processing and
transport services together with all the facilities and infrastructures for power distribution and environmental control
together with the necessary levels of resilience and security required to provide the desired service availability
discontinuous interference (161-02-13): electromagnetic interference occur
...
Final draft ETSI ES 201 468 V1.7.0 (2022-11)
ETSI STANDARD
Additional ElectroMagnetic Compatibility (EMC)
requirements and resistibility requirements for
telecommunications equipment for enhanced availability
of service in specific applications
---------------------- Page: 1 ----------------------
2 Final draft ETSI ES 201 468 V1.7.0 (2022-11)
Reference
RES/ERM-EMC-411
Keywords
EMC, management, network, power supply,
switching, testing, transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
ntation or warranty is made of merchantability or fitness
and/or governmental rule and/or regulation and further, no represe
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2022.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI ES 201 468 V1.7.0 (2022-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 11
3.3 Abbreviations . 11
4 General operational conditions . 11
4.0 General requirements . 11
4.1 Equipment configuration . 12
4.2 Exercising equipment . 12
4.3 Laboratory environment . 12
5 General performance criteria for immunity tests . 12
5.0 General requirements . 12
5.1 Performance criterion A . 13
5.2 Performance criterion B . 13
5.3 Performance criterion C . 13
6 Immunity: test methods . 13
6.1 General . 13
6.2 Electrostatic discharge . 13
6.3 Electrical fast transients/burst . 13
6.4 Surges . 13
6.4.1 Outdoor signal line ports . 13
6.4.2 Indoor signal line ports . 13
6.4.3 AC power line ports . 14
6.5 Immunity to continuous conducted signals . 14
6.5.1 AC power supply port . 14
6.5.2 DC power supply interface port . 14
6.5.3 Signal line port . 14
6.6 Immunity to radiated electromagnetic fields . 14
6.7 Immunity to power supply disturbances: AC and DC ports . 14
6.7.1 Test of immunity to low frequency disturbances: AC ports . 14
6.7.2 Test of immunity to low frequency disturbances: DC ports . 15
6.8 Immunity to interference from permanent power induction . 15
6.9 Power frequency magnetic fields . 15
7 Resistibility: test methods . 15
7.1 Electrostatic discharge . 15
7.2 Lightning . 15
7.3 Power induction and earth potential rise . 15
7.4 Mains power contact . 15
8 Emission: test methods and limits . 15
9 Immunity requirements . 15
9.0 General requirements . 15
9.1 Equipment operating in telecommunication centres . 17
9.1.1 Telecommunication centres, level 1. 17
9.1.1.1 Telecommunication centres, enclosure port, level 1 . 17
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI ES 201 468 V1.7.0 (2022-11)
9.1.1.2 Telecommunication centres, ports for outdoor signal lines, level 1 . 17
9.1.1.3 Telecommunication centres, ports for indoor signal lines, level 1 . 18
9.1.1.4 Telecommunication centres, AC power ports, level 1 . 18
9.1.1.5 Telecommunication centres, DC power ports, level 1 . 18
9.1.2 Telecommunication centres, level 2. 18
9.1.2.1 Telecommunication centres, enclosure port, level 2 . 18
9.1.2.2 Telecommunication centres, ports for outdoor signal lines, level 2 . 19
9.1.2.3 Telecommunication centres, ports for indoor signal lines, level 2 . 19
9.1.2.4 Telecommunication centres, AC power ports, level 2 . 20
9.1.2.5 Telecommunication centres, DC power ports, level 2 . 21
9.2 Equipment operating in locations other than telecommunication centres . 21
9.2.1 Equipment operating in locations other than telecommunication centres, level 1 . 21
9.2.1.1 Other than telecommunication centres, enclosure port, level 1 . 21
9.2.1.2 Other than telecommunication centres, ports for outdoor signal lines, level 1 . 22
9.2.1.3 Other than telecommunication centres, ports for indoor signal lines, level 1 . 22
9.2.1.4 Other than telecommunication centres, AC power ports, level 1 . 22
9.2.1.5 Other than telecommunication centres, DC power ports, level 1 . 22
9.2.2 Equipment operating in locations other than telecommunication centres, level 2 . 23
9.2.2.1 Other than telecommunication centres, enclosure port, level 2 . 23
9.2.2.2 Other than telecommunication centres, ports for outdoor signal lines, level 2 . 24
9.2.2.3 Other than telecommunication centres, ports for indoor signal lines, level 2 . 25
9.2.2.4 Other than telecommunication centres, AC power ports, level 2 . 26
9.2.2.5 Other than telecommunication centres, DC power ports, level 2 . 26
10 Resistibility requirements . 27
Annex A (informative): Evaluation of test results . 28
Annex B (informative): Guidance for the product specific operational conditions and
performance criteria . 30
B.1 General . 30
B.2 Operational conditions and performance criteria during EMC tests . 30
B.2.1 General considerations . 30
B.2.2 Operational conditions during EMC tests . 31
B.2.3 Performance criteria during EMC tests . 31
B.2.4 Examples of specific performance criteria . 32
B.2.5 Example of additional performance criteria (and further details of requirements) for "primary rate
multiple access" equipment . 32
Annex C (informative): Bibliography . 33
History . 34
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI ES 201 468 V1.7.0 (2022-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This final draft ETSI Standard (ES) has been produced by ETSI Technical Committee Electromagnetic compatibility
and Radio spectrum Matters (ERM), and is now submitted for the ETSI standards Membership Approval Procedure.
The present document defines the EMC requirements of telecommunication network equipment for an increased
reliability and the resistibility requirements.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document defines EMC requirements for telecommunications equipment to guarantee enhanced availability
of service in specific applications. Resistibility requirements are also defined with reference to ITU-T K series
recommendations.
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI ES 201 468 V1.7.0 (2022-11)
1 Scope
The present document covers the emission, immunity and resistibility requirements for telecommunications equipment
where higher performance is required by operators to guarantee enhanced availability of service in specific applications.
The environments considered in the present document are defined in ETSI TR 101 651 [i.5] and are:
• telecommunication centres (classes 1 and 2 of ETSI TR 101 651 [i.5]);
• locations other than telecommunication centres (classes 3 and 4 of ETSI TR 101 651 [i.5]).
Data centres and similar facilities are also considered telecommunication centres, where they are within a dedicated
room with servers, storage devices and associated telecommunication equipment.
Considering that all kinds of equipment are not equally important, two equipment categories and associated EMC
requirements are introduced and are designated as:
• level 1 (see tables in clauses 9.1.1.1 to 9.1.1.5 and 9.2.1.1 to 9.2.1.5);
• level 2 (see tables in clauses 9.1.2.1 to 9.1.2.5 and 9.2.2.1 to 9.2.2.5);
the latter containing the more demanding requirements.
The appropriate level should be chosen by the operator considering the consequences of failure of the equipment which
may lead to impaired function, loss of service, failure to meet contractual obligations or bad publicity and loss of
reputation.
The present document is applicable to all equipment types, examples of which are listed below:
• switching equipment which includes trunk and local telephone exchanges, remote switching concentrators,
international switches, telex switches and network packet switches, base station controllers, radio network
controllers, network servers and gateways;
• non-radio transmission equipment which includes multiplexers, line equipment and repeaters, Synchronous
Digital Hierarchy (SDH), Digital Cross Connect (DXC), Asynchronous Transfer Mode (ATM) and network
terminations, transmission equipment used in the access network like xDSL;
• power supply equipment which includes central power plant, end of suite power supplies, power management
systems and other dedicated telecommunications network power supplies;
• supervisory equipment and dedicated Operation And Maintenance (OAM) equipment;
• tariff and billing equipment;
• data centre equipment which includes: Storage, Processor, Server intended to be used within
telecommunication network infrastructure.
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI ES 201 468 V1.7.0 (2022-11)
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 386 (V2.2.1): "Telecommunication network equipment; Harmonised Standard for
ElectroMagnetic Compatibility (EMC) requirements".
[2] EN 61000-4-2 (2009): "Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test" (produced by CENELEC).
[3] EN 61000-4-3 (2020): "Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test" (produced by
CENELEC).
[4] EN 61000-4-4 (2012): "Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test" (produced by CENELEC).
[5] EN 61000-4-5 (2014 + Amendment 1: 2017): "Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test" (produced by CENELEC).
[6] EN 61000-4-6 (2014): "Electromagnetic compatibility (EMC); Part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency fields" (produced by
CENELEC).
[7] EN 61000-4-8 (2010): "Electromagnetic compatibility (EMC); Part 4-8: Testing and measurement
techniques - Power frequency magnetic field immunity test" (produced by CENELEC).
[8] EN 61000-4-11 (2020): "Electromagnetic compatibility (EMC); Part 4-11: Testing and
measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
for equipment with input current up to 16 A per phase" (produced by CENELEC).
[9] Recommendation ITU-T K.54 (12/2004): "Conducted immunity test method and level at
fundamental power frequencies".
[10] Recommendation ITU-T K.20 (06/2021): "Resistibility of telecommunication equipment installed
in a telecommunications centre to overvoltages and overcurrents".
[11] Recommendation ITU-T K.21 (08/2022): "Resistibility of telecommunication equipment installed
in customer premises to overvoltages and overcurrents".
[12] Recommendation ITU-T K.45 (10/2019): "Resistibility of telecommunication equipment installed
in the access and trunk networks to overvoltages and overcurrents".
[13] EN 61000-4-34 (2007 + Amendment A1: 2009): "Electromagnetic compatibility (EMC) -
Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage
variations immunity tests for equipment with mains current more than 16 A per phase" (produced
by CENELEC).
[14] IEC 60050-714 (1992): "International Electrotechnical Vocabulary (IEV) - Part 714: Switching
and signalling in telecommunications".
ETSI
---------------------- Page: 7 ----------------------
8 Final draft ETSI ES 201 468 V1.7.0 (2022-11)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-T K.44 (10-2019): "Resistibility tests for telecommunication equipment
exposed to overvoltages and overcurrents - Basic Recommendation".
[i.2] ETSI EN 300 132-1 (V.2.1.1) (03-2019): "Environmental Engineering (EE); Power supply
interface at the input to Information and Communication Technology (ICT) equipment;
Part 1: Alternating Current (AC)".
[i.3] ETSI EN 300 132-2 (V2.7.1) (09-2022): "Environmental Engineering (EE); Power supply
interface at the input of Information and Communication Technology (ICT) equipment;
Part 2: -48 V Direct Current (DC)".
[i.4] IEC 60050-161 (1990): "International Electrotechnical Vocabulary (IEV); Part 161:
Electromagnetic compatibility".
[i.5] ETSI TR 101 651 (V2.1.1): "Classification of the electromagnetic environment conditions for
equipment in telecommunication networks".
[i.6] ETSI EN 300 132-3 (V2.2.1): "Environmental Engineering (EE); Power supply interface at the
input of Information and Communication Technology (ICT) equipment; Part 3: Up to 400 V
Direct Current (DC)".
[i.7] IEEE 1284™ (2000): "IEEE Standard Signalling Method for a Bidirectional Parallel Peripheral
Interface for Personal Computers".
[i.8] IEEE 1394™ (2008): "IEEE Standard for High Performance Serial Bus Bridges".
[i.9] Void.
[i.10] EN 55032 (2015 + Amendment A11: 2020 + Amendment A1: 2020): "Electromagnetic
compatibility of multimedia equipment - Emission requirements" (produced by CENELEC).
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in IEC 60050-161 [i.4] and the following apply:
NOTE: Where applicable, the clause number of IEC 60050-161 [i.4] is in parenthesis.
Audio (low) Frequency (AF): frequency interval from 0 Hz to 20 kHz
NOTE: It may sometimes be convenient to extend the use of this term to include the range of frequencies up to
150 kHz.
burst (161-02-07): sequence of a limited number of distinct pulses or an oscillation of limited duration
ETSI
---------------------- Page: 8 ----------------------
9 Final draft ETSI ES 201 468 V1.7.0 (2022-11)
characteristic severity: characteristic severity for a certain detail parameter in an environmental class states a severity
which has only a low probability (generally less than 1 %) of being exceeded
NOTE: The term relates to duration, rate of occurrence or location. It applies to requirements on the environment
and to immunity requirements.
connection: temporary association of transmission channels or telecommunication circuits, switching or other
functional units set up to provide for the transfer of information between two or more points in a telecommunication
network (IEC 60050-714 [14])
continuous disturbance (161-02-11): electromagnetic disturbance the effects of which on a particular device or
equipment cannot be resolved into a succession of distinct effects
data centre: structure, or group of structures, dedicated to the centralized accommodation, interconnection and
operation of information technology and network telecommunications equipment providing data storage, processing and
transport services togeth
...
SLOVENSKI STANDARD
SIST ES 201 468 V1.7.1:2023
01-marec-2023
Dodatne zahteve za elektromagnetno združljivost (EMC) in odpornost
telekomunikacijske opreme za povečano razpoložljivost storitve v posebnih
oblikah uporabe
Additional ElectroMagnetic Compatibility (EMC) requirements and resistibility
requirements for telecommunications equipment for enhanced availability of service in
specific applications
Ta slovenski standard je istoveten z: ETSI ES 201 468 V1.7.1 (2023-01)
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST ES 201 468 V1.7.1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ES 201 468 V1.7.1:2023
---------------------- Page: 2 ----------------------
SIST ES 201 468 V1.7.1:2023
ETSI ES 201 468 V1.7.1 (2023-01)
ETSI STANDARD
Additional ElectroMagnetic Compatibility (EMC)
requirements and resistibility requirements for
telecommunications equipment for enhanced availability
of service in specific applications
---------------------- Page: 3 ----------------------
SIST ES 201 468 V1.7.1:2023
2 ETSI ES 201 468 V1.7.1 (2023-01)
Reference
RES/ERM-EMC-411
Keywords
EMC, management, network, power supply,
switching, testing, transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
arranty is made of merchantability or fitness
and/or governmental rule and/or regulation and further, no representation or w
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2023.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST ES 201 468 V1.7.1:2023
3 ETSI ES 201 468 V1.7.1 (2023-01)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 10
3.3 Abbreviations . 10
4 General operational conditions . 11
4.0 General requirements . 11
4.1 Equipment configuration . 11
4.2 Exercising equipment . 12
4.3 Laboratory environment . 12
5 General performance criteria for immunity tests . 12
5.0 General requirements . 12
5.1 Performance criterion A . 12
5.2 Performance criterion B . 12
5.3 Performance criterion C . 12
6 Immunity: test methods . 13
6.1 General . 13
6.2 Electrostatic discharge . 13
6.3 Electrical fast transients/burst . 13
6.4 Surges . 13
6.4.1 Outdoor signal line ports . 13
6.4.2 Indoor signal line ports . 13
6.4.3 AC power line ports . 13
6.5 Immunity to continuous conducted signals . 13
6.5.1 AC power supply port . 13
6.5.2 DC power supply interface port . 13
6.5.3 Signal line port . 14
6.6 Immunity to radiated electromagnetic fields . 14
6.7 Immunity to power supply disturbances: AC and DC ports . 14
6.7.1 Test of immunity to low frequency disturbances: AC ports . 14
6.7.2 Test of immunity to low frequency disturbances: DC ports . 14
6.8 Immunity to interference from permanent power induction . 14
6.9 Power frequency magnetic fields . 14
7 Resistibility: test methods . 15
7.1 Electrostatic discharge . 15
7.2 Lightning . 15
7.3 Power induction and earth potential rise . 15
7.4 Mains power contact . 15
8 Emission: test methods and limits . 15
9 Immunity requirements . 15
9.0 General requirements . 15
9.1 Equipment operating in telecommunication centres . 17
9.1.1 Telecommunication centres, level 1. 17
9.1.1.1 Telecommunication centres, enclosure port, level 1 . 17
ETSI
---------------------- Page: 5 ----------------------
SIST ES 201 468 V1.7.1:2023
4 ETSI ES 201 468 V1.7.1 (2023-01)
9.1.1.2 Telecommunication centres, ports for outdoor signal lines, level 1 . 17
9.1.1.3 Telecommunication centres, ports for indoor signal lines, level 1 . 18
9.1.1.4 Telecommunication centres, AC power ports, level 1 . 18
9.1.1.5 Telecommunication centres, DC power ports, level 1 . 18
9.1.2 Telecommunication centres, level 2. 18
9.1.2.1 Telecommunication centres, enclosure port, level 2 . 18
9.1.2.2 Telecommunication centres, ports for outdoor signal lines, level 2 . 19
9.1.2.3 Telecommunication centres, ports for indoor signal lines, level 2 . 19
9.1.2.4 Telecommunication centres, AC power ports, level 2 . 20
9.1.2.5 Telecommunication centres, DC power ports, level 2 . 21
9.2 Equipment operating in locations other than telecommunication centres . 21
9.2.1 Equipment operating in locations other than telecommunication centres, level 1 . 21
9.2.1.1 Other than telecommunication centres, enclosure port, level 1 . 21
9.2.1.2 Other than telecommunication centres, ports for outdoor signal lines, level 1 . 22
9.2.1.3 Other than telecommunication centres, ports for indoor signal lines, level 1 . 22
9.2.1.4 Other than telecommunication centres, AC power ports, level 1 . 22
9.2.1.5 Other than telecommunication centres, DC power ports, level 1 . 22
9.2.2 Equipment operating in locations other than telecommunication centres, level 2 . 23
9.2.2.1 Other than telecommunication centres, enclosure port, level 2 . 23
9.2.2.2 Other than telecommunication centres, ports for outdoor signal lines, level 2 . 24
9.2.2.3 Other than telecommunication centres, ports for indoor signal lines, level 2 . 25
9.2.2.4 Other than telecommunication centres, AC power ports, level 2 . 26
9.2.2.5 Other than telecommunication centres, DC power ports, level 2 . 26
10 Resistibility requirements . 27
Annex A (informative): Evaluation of test results . 28
Annex B (informative): Guidance for the product specific operational conditions and
performance criteria . 30
B.1 General . 30
B.2 Operational conditions and performance criteria during EMC tests . 30
B.2.1 General considerations . 30
B.2.2 Operational conditions during EMC tests . 31
B.2.3 Performance criteria during EMC tests . 31
B.2.4 Examples of specific performance criteria . 32
B.2.5 Example of additional performance criteria (and further details of requirements) for "primary rate
multiple access" equipment . 32
Annex C (informative): Bibliography . 33
History . 34
ETSI
---------------------- Page: 6 ----------------------
SIST ES 201 468 V1.7.1:2023
5 ETSI ES 201 468 V1.7.1 (2023-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio
spectrum Matters (ERM).
The present document defines the EMC requirements of telecommunication network equipment for an increased
reliability and the resistibility requirements.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
The present document defines EMC requirements for telecommunications equipment to guarantee enhanced availability
of service in specific applications. Resistibility requirements are also defined with reference to ITU-T K series
recommendations.
ETSI
---------------------- Page: 7 ----------------------
SIST ES 201 468 V1.7.1:2023
6 ETSI ES 201 468 V1.7.1 (2023-01)
1 Scope
The present document covers the emission, immunity and resistibility requirements for telecommunications equipment
where higher performance is required by operators to guarantee enhanced availability of service in specific applications.
The environments considered in the present document are defined in ETSI TR 101 651 [i.5] and are:
• telecommunication centres (classes 1 and 2 of ETSI TR 101 651 [i.5]);
• locations other than telecommunication centres (classes 3 and 4 of ETSI TR 101 651 [i.5]).
Data centres and similar facilities are also considered telecommunication centres, where they are within a dedicated
room with servers, storage devices and associated telecommunication equipment.
Considering that all kinds of equipment are not equally important, two equipment categories and associated EMC
requirements are introduced and are designated as:
• level 1 (see tables in clauses 9.1.1.1 to 9.1.1.5 and 9.2.1.1 to 9.2.1.5);
• level 2 (see tables in clauses 9.1.2.1 to 9.1.2.5 and 9.2.2.1 to 9.2.2.5);
the latter containing the more demanding requirements.
The appropriate level should be chosen by the operator considering the consequences of failure of the equipment which
may lead to impaired function, loss of service, failure to meet contractual obligations or bad publicity and loss of
reputation.
The present document is applicable to all equipment types, examples of which are listed below:
• switching equipment which includes trunk and local telephone exchanges, remote switching concentrators,
international switches, telex switches and network packet switches, base station controllers, radio network
controllers, network servers and gateways;
• non-radio transmission equipment which includes multiplexers, line equipment and repeaters, Synchronous
Digital Hierarchy (SDH), Digital Cross Connect (DXC), Asynchronous Transfer Mode (ATM) and network
terminations, transmission equipment used in the access network like xDSL;
• power supply equipment which includes central power plant, end of suite power supplies, power management
systems and other dedicated telecommunications network power supplies;
• supervisory equipment and dedicated Operation And Maintenance (OAM) equipment;
• tariff and billing equipment;
• data centre equipment which includes: Storage, Processor, Server intended to be used within
telecommunication network infrastructure.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
ETSI
---------------------- Page: 8 ----------------------
SIST ES 201 468 V1.7.1:2023
7 ETSI ES 201 468 V1.7.1 (2023-01)
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 386 (V2.2.1): "Telecommunication network equipment; Harmonised Standard for
ElectroMagnetic Compatibility (EMC) requirements".
[2] EN 61000-4-2 (2009): "Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test" (produced by CENELEC).
[3] EN 61000-4-3 (2020): "Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test" (produced by
CENELEC).
[4] EN 61000-4-4 (2012): "Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test" (produced by CENELEC).
[5] EN 61000-4-5 (2014 + Amendment 1: 2017): "Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test" (produced by CENELEC).
[6] EN 61000-4-6 (2014): "Electromagnetic compatibility (EMC); Part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency fields" (produced by
CENELEC).
[7] EN 61000-4-8 (2010): "Electromagnetic compatibility (EMC); Part 4-8: Testing and measurement
techniques - Power frequency magnetic field immunity test" (produced by CENELEC).
[8] EN 61000-4-11 (2020): "Electromagnetic compatibility (EMC); Part 4-11: Testing and
measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
for equipment with input current up to 16 A per phase" (produced by CENELEC).
[9] Recommendation ITU-T K.54 (12/2004): "Conducted immunity test method and level at
fundamental power frequencies".
[10] Recommendation ITU-T K.20 (06/2021): "Resistibility of telecommunication equipment installed
in a telecommunications centre to overvoltages and overcurrents".
[11] Recommendation ITU-T K.21 (08/2022): "Resistibility of telecommunication equipment installed
in customer premises to overvoltages and overcurrents".
[12] Recommendation ITU-T K.45 (10/2019): "Resistibility of telecommunication equipment installed
in the access and trunk networks to overvoltages and overcurrents".
[13] EN 61000-4-34 (2007 + Amendment A1: 2009): "Electromagnetic compatibility (EMC) -
Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage
variations immunity tests for equipment with mains current more than 16 A per phase" (produced
by CENELEC).
[14] IEC 60050-714 (1992): "International Electrotechnical Vocabulary (IEV) - Part 714: Switching
and signalling in telecommunications".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Recommendation ITU-T K.44 (10-2019): "Resistibility tests for telecommunication equipment
exposed to overvoltages and overcurrents - Basic Recommendation".
ETSI
---------------------- Page: 9 ----------------------
SIST ES 201 468 V1.7.1:2023
8 ETSI ES 201 468 V1.7.1 (2023-01)
[i.2] ETSI EN 300 132-1 (V.2.1.1) (03-2019): "Environmental Engineering (EE); Power supply
interface at the input to Information and Communication Technology (ICT) equipment;
Part 1: Alternating Current (AC)".
[i.3] ETSI EN 300 132-2 (V2.7.1) (09-2022): "Environmental Engineering (EE); Power supply
interface at the input of Information and Communication Technology (ICT) equipment;
Part 2: -48 V Direct Current (DC)".
[i.4] IEC 60050-161 (1990): "International Electrotechnical Vocabulary (IEV); Part 161:
Electromagnetic compatibility".
[i.5] ETSI TR 101 651 (V2.1.1): "Classification of the electromagnetic environment conditions for
equipment in telecommunication networks".
[i.6] ETSI EN 300 132-3 (V2.2.1): "Environmental Engineering (EE); Power supply interface at the
input of Information and Communication Technology (ICT) equipment; Part 3: Up to 400 V
Direct Current (DC)".
[i.7] IEEE 1284™ (2000): "IEEE Standard Signalling Method for a Bidirectional Parallel Peripheral
Interface for Personal Computers".
[i.8] IEEE 1394™ (2008): "IEEE Standard for High Performance Serial Bus Bridges".
[i.9] Void.
[i.10] EN 55032 (2015 + Amendment A11: 2020 + Amendment A1: 2020): "Electromagnetic
compatibility of multimedia equipment - Emission requirements" (produced by CENELEC).
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in IEC 60050-161 [i.4] and the following apply:
NOTE: Where applicable, the clause number of IEC 60050-161 [i.4] is in parenthesis.
Audio (low) Frequency (AF): frequency interval from 0 Hz to 20 kHz
NOTE: It may sometimes be convenient to extend the use of this term to include the range of frequencies up to
150 kHz.
burst (161-02-07): sequence of a limited number of distinct pulses or an oscillation of limited duration
characteristic severity: characteristic severity for a certain detail parameter in an environmental class states a severity
which has
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.