ETSI ETS 300 607-1 ed.3 (1997-01)
Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1)
Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS) conformance specification; Part 1: Conformance specification (GSM 11.10-1)
RE/SMG-071110PR-1
Digitalni celični telekomunikacijski sistem (faza 2) - Specifikacija skladnosti mobilne postaje (MS) - 1. del: Specifikacija skladnosti (GSM 11.10-1)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ETS 300 607-1 E3:2005
01-februar-2005
'LJLWDOQLFHOLþQLWHOHNRPXQLNDFLMVNLVLVWHPID]D6SHFLILNDFLMDVNODGQRVWL
PRELOQHSRVWDMH06GHO6SHFLILNDFLMDVNODGQRVWL*60
Digital cellular telecommunications system (Phase 2) (GSM); Mobile Station (MS)
conformance specification; Part 1: Conformance specification (GSM 11.10-1)
Ta slovenski standard je istoveten z: ETS 300 607-1 Edition 3
ICS:
33.070.50 Globalni sistem za mobilno Global System for Mobile
telekomunikacijo (GSM) Communication (GSM)
SIST ETS 300 607-1 E3:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 607-1 E3:2005
---------------------- Page: 2 ----------------------
SIST ETS 300 607-1 E3:2005
EUROPEAN ETS 300 607-1
TELECOMMUNICATION January 1997
STANDARD Third edition
Source: ETSI TC-SMG Reference: RE/SMG-07111OPR-1
ICS: 33.020
Key words: Digital cellular telecommunications system, Global System for Mobile Communication (GSM)
R
GLOBAL SYSTEM FOR
MOBILE COMMUNICATIONS
Digital cellular telecommunication system (Phase 2);
Mobile Station (MS) conformance specification;
Part 1: Conformance specification
(GSM 11.10-1)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.
---------------------- Page: 3 ----------------------
SIST ETS 300 607-1 E3:2005
Page 2
ETS 300 607-1 (GSM 11.10-1 version 4.16.1): January 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 607-1 E3:2005
Page 3
ETS 300 607-1 (GSM 11.10-1 version 4.16.1): January 1997
Contents
Foreword .29
1 Scope .30
2 Normative references.30
3 Definitions, conventions, and applicability.36
3.1 Mobile station definition and configurations.36
3.2 Applicability .37
3.2.1 Applicability of this specification .37
3.2.2 Applicability of the individual tests .37
3.2.3 Applicability to terminal equipment.57
3.3 Definitions .57
3.4 Conventions for mathematical notations.58
3.4.1 Mathematical signs.58
3.4.2 Powers to the base 10.58
3.5 Conventions on electrical terms.58
3.5.1 Radio Frequency (RF) input signal level .58
3.5.2 Reference sensitivity level.59
3.5.3 Power level of fading signal.59
3.6 Terms on test conditions.59
3.6.1 Radio test conditions .59
4 Test Equipment .60
4.1 Terms used to describe test equipment in this ETS.60
4.2 Functional requirements of test equipment.60
5 Testing methodology in general (layers 1, 2, and 3) .60
5.1 Testing of optional functions and procedures.60
5.2 Test interfaces and facilities .60
5.3 Different protocol layers.61
5.4 Information to be provided by the apparatus supplier.61
5.5 Definitions of transmit and receive times.61
6 Reference test methods.61
6.1 General .61
6.2 Choice of frequencies in the frequency hopping mode.62
6.3 "Ideal" radio conditions .62
6.4 Standard test signals. .62
6.5 Power (control) levels. .62
7 Implicit testing.62
8 Measurement uncertainty.63
9 Format of tests. .63
10 Generic call set up procedures .63
10.1 Generic call set-up procedure for mobile terminating speech calls.63
10.1.1 Initial conditions.63
10.1.2 Definition of system information messages.64
10.1.3 Procedure.66
10.1.4 Specific message contents .67
10.2 Generic call set-up procedure for mobile originating speech calls .68
10.2.1 Initial conditions.68
10.2.2 Definition of system information messages.68
---------------------- Page: 5 ----------------------
SIST ETS 300 607-1 E3:2005
Page 4
ETS 300 607-1 (GSM 11.10-1 version 4.16.1): January 1997
10.2.3 Procedure . 69
10.2.4 Specific message contents. 69
10.3 Generic call set-up procedure for mobile terminating data calls . 71
10.3.1 Initial conditions . 71
10.3.2 Definition of system information messages. 71
10.3.3 Procedure . 72
10.3.4 Specific message contents. 72
10.4 Generic call set-up procedure for mobile originating data calls . 74
10.4.1 Initial conditions . 74
10.4.2 Definition of system information messages. 74
10.4.3 Procedure . 75
10.4.4 Specific message contents. 75
11 General tests . 78
11.1 Verification of support and non-support of services (multiple numbering scheme or
ISDN). 78
11.1.1 Mobile Terminated (MT) calls . 78
11.1.2 Mobile Originated (MO) calls . 79
11.2 Verification of support of the single numbering scheme . 80
11.3 Verification of non-support of services (Advice of Charge Charging (AOCC)) . 81
11.4 Verification of non-support of services (call hold) . 82
11.5 Verification of non-support of services (multiparty). 83
11.6 Verification of non-support of feature (Fixed Dialling Number (FDN)) . 84
11.7 IMEI Security . 85
11.8 Coding of the Bearer Capability information element. 86
11.8.1 Network to MS Direction. 86
11.8.1.1 BS 21 to 26 - Asynchronous Service . 86
11.8.1.1.1 BS 21. 86
11.8.1.1.2 BS 22. 90
11.8.1.1.3 BS 23. 90
11.8.1.1.4 BS 24. 90
11.8.1.1.5 BS 25. 90
11.8.1.1.6 BS 26. 90
11.8.1.2 BS 31 to 34 - Synchronous Service . 91
11.8.1.2.1 BS 32. 91
11.8.1.2.2 BS 31. 95
11.8.1.2.3 BS 33. 96
11.8.1.2.4 BS 34. 96
11.8.1.3 BS 61 - Alternate Speech / Data. 96
11.8.1.3.1 Speech/Asynchronous Data,
Transparent. 97
11.8.1.3.2 Speech/Asynchronous Data, Non
Transparent. 99
11.8.1.3.3 Speech/Synchronous Data. 101
11.8.1.4 BS 81 - Speech followed by Data . 102
11.8.1.4.1 Speech followed by Asynchronous
Data. 102
11.8.1.4.2 Speech followed by Synchronous
Data. 102
11.8.1.5 TS 61 - Alternate Speech / Facsimile group 3 . 102
11.8.1.6 TS 62 - Automatic Facsimile group 3. 104
11.8.2 MS to SS direction . 104
11.8.2.1 BS 21 to 26 - Asynchronous Service . 104
11.8.2.1.1 BS 21. 105
11.8.2.1.2 BS 22. 109
11.8.2.1.3 BS 23. 109
11.8.2.1.4 BS 24. 109
11.8.2.1.5 BS 25. 109
11.8.2.1.6 BS 26. 109
11.8.2.2 BS 31 to 34 - Synchronous Service . 110
11.8.2.2.1 BS 32. 110
11.8.2.2.2 BS 31. 114
11.8.2.2.3 BS 33. 115
---------------------- Page: 6 ----------------------
SIST ETS 300 607-1 E3:2005
Page 5
ETS 300 607-1 (GSM 11.10-1 version 4.16.1): January 1997
11.8.2.2.4 BS 34 .115
11.8.2.3 BS 41 to 46 - PAD Access Asynchronous.116
2)
11.8.2.3.1 BS 41 .116
11.8.2.3.2 BS 42 .117
11.8.2.3.3 BS 43 .118
11.8.2.3.4 BS 44 .118
11.8.2.3.5 BS 45 .118
11.8.2.3.6 BS 46 .118
11.8.2.4 BS 51 to 53 - Packet Service Synchronous.119
2)
11.8.2.4.1 BS 51 .119
11.8.2.4.2 BS 52 .119
11.8.2.4.3 BS 53 .119
11.8.2.5 BS 61 - Alternate Speech / Data.120
11.8.2.5.1 Speech/Asynchronous Data,
Transparent .120
11.8.2.5.2 Speech/Asynchronous Data, Non
Transparent .122
11.8.2.5.3 Speech/Synchronous Data .124
11.8.2.6 BS 81 - Speech followed by Data .125
11.8.2.6.1 Speech followed by Asynchronous
Data .125
11.8.2.6.2 Speech followed by Synchronous
Data .125
11.8.2.7 TS 61 - Alternate Speech / Facsimile group 3.125
11.8.2.8 TS 62 - Automatic Facsimile group 3 .127
12 Transceiver.128
12.1 Conducted spurious emissions.128
12.1.1 MS allocated a channel .128
12.1.2 MS in idle mode.130
12.2 Radiated spurious emissions.131
12.2.1 MS allocated a channel .132
12.2.2 MS in idle mode.134
13 Transmitter .136
13.1 Frequency error and phase error.136
13.2 Frequency error under multipath and interference conditions .139
13.3 Transmitter output power and burst timing .141
13.4 Output RF spectrum .148
13.5 Intermodulation attenuation .154
14 Receiver .156
14.1 Bad frame indication .161
14.1.1 Bad frame indication - TCH/FS .161
14.1.1.1 Bad frame indication - TCH/FS - Random RF input .161
14.1.1.2 Bad frame indication - TCH/FS - Frequency hopping and
downlink DTX .162
14.1.2 Bad frame indication - TCH/HS.164
14.1.2.1 Bad frame indication - TCH/HS - Random RF input.164
14.1.2.2 Bad frame indication - TCH/HS - Frequency hopping and
downlink DTX .165
14.1.3 Bad frame indication - TCH/FS - Frequency hopping and downlink DTX -
Phase 2 MS in a phase 1 network.166
14.1.4 Bad frame indication - TCH/HS - Frequency hopping and downlink DTX -
Phase 2 MS in a phase 1 network.168
14.2 Reference sensitivity.170
14.2.1 Reference sensitivity - TCH/FS.170
14.2.2 Reference sensitivity - TCH/HS (Speech frames).172
14.2.3 Reference sensitivity - FACCH/F .175
14.2.4 Reference sensitivity - FACCH/H .176
14.2.5 Reference sensitivity - full rate data channels.177
14.2.6 Reference sensitivity - half rate data channels.178
14.3 Usable receiver input level range.179
---------------------- Page: 7 ----------------------
SIST ETS 300 607-1 E3:2005
Page 6
ETS 300 607-1 (GSM 11.10-1 version 4.16.1): January 1997
14.4 Co-channel rejection . 180
14.4.1 Co-channel rejection - TCH/FS . 180
14.4.2 Co-channel rejection - TCH/HS . 182
14.4.3 Co-channel rejection - TCH/HS (SID frames) . 184
14.4.4 Co-channel rejection - FACCH/F. 186
14.4.5 Co-channel rejection - FACCH/H. 187
14.5 Adjacent channel rejection . 188
14.5.1 Adjacent channel rejection - speech channels . 188
14.5.2 Adjacent channel rejection - control channels . 190
14.6 Intermodulation rejection. 192
14.6.1 Intermodulation rejection - speech channels . 192
14.6.2 Intermodulation rejection - control channels. 194
14.7 Blocking and spurious response . 196
14.7.1 Blocking and spurious response - speech channels . 196
14.7.2 Blocking and spurious response - control channels . 199
14.8 AM suppression. 202
14.8.1 AM suppression - speech channels. 202
14.8.2 AM suppression - control channels. 203
15 Timing advance and absolute delay . 206
16 Reception time tracking speed . 208
17 Access times during handover . 210
17.1 Intra cell channel change . 210
17.2 Inter cell handover. 212
18 Temporary reception gaps. 215
19 Channel release after unrecoverable errors . 217
19.1 Channel release after unrecoverable errors -1 . 217
19.2 Channel release after unrecoverable errors - 2 . 218
19.3 Channel release after unrecoverable errors - 3 . 219
20 Cell selection and reselection. 221
20.1 Cell selection. 222
20.2 Cell selection with varying signal strength values . 224
20.3 Basic cell reselection. 226
20.4 Cell reselection using TEMPORARY_OFFSET, CELL_RESELECT_OFFSET,
POWER_OFFSET and PENALTY_TIME parameters. 228
20.5 Cell reselection using parameters transmitted in the System Information type 2bis, type
7 and type 8 messages . 230
20.5.5 Test Requirements . 231
20.6 Cell reselection timings . 231
20.6.1 Definition and applicability . 231
20.6.2 Conformance requirement. 231
20.6.3 Test purpose. 231
20.6.4 Method of test. 232
20.6.4.1 Initial conditions. 232
20.6.4.2 Procedure. 232
20.6.5 Test requirements. 232
20.7 Priority of cells . 233
20.7.4.2 Procedure. 234
20.7.5 Test requirements. 234
20.8 Cell reselection when C1 (serving cell) < 0 for 5 seconds . 234
20.8.1 Definition and applicability . 234
20.8.2 Conformance requirement. 234
20.8.3 Test purpose. 234
20.8.4 Method of test. 235
20.8.4.1 Initial conditions. 235
20.8.4.2 Procedure. 235
20.8.5 Test requirements. 235
20.9 Running average of the surrounding cell BCCH carrier signal levels . 235
---------------------- Page: 8 ----------------------
SIST ETS 300 607-1 E3:2005
Page 7
ETS 300 607-1 (GSM 11.10-1 version 4.16.1): January 1997
20.9.1 Definition and applicability .235
20.9.2 Conformance requirement .235
20.9.3 Test purpose .236
20.9.4 Method of test.236
20.9.4.1 Initial conditions .236
20.9.4.2 Procedure .236
20.9.5 Test requirements .236
20.10 Running average of the serving cell BCCH carrier signal level .237
20.10.1 Definition and applicability .237
20.10.2 Conformance requirement .237
20.10.3 Test purpose .237
20.10.4 Method of test.237
20.10.4.1 Initial conditions .237
20.10.4.2 Procedure .237
20.10.5 Test requirement .237
20.11 Updating the list of six strongest neighbour carriers and decoding the BCCH
information of a new carrier on the list.238
20.11.1 Definition and applicability .238
20.11.2 Conformance requirement .238
20.11.3 Test purpose .238
20.11.4 Method of test.238
20.11.4.1 Initial conditions .238
20.11.4.2 Procedure .238
20.11.5 Test requirements .238
20.12 Decoding the BCCH information of the neighbour carriers on the list of six strongest
neighbour carriers.239
20.12.1 Definition and applicability .239
20.12.2 Conformance requirement .239
20.12.3 Test purpose .239
20.12.4 Method of test.239
20.12.4.1 Initial conditions .239
20.12.4.2 Procedure .239
20.12.5 Test requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.