ETSI TS 102 950-1 V1.7.1 (2018-11)

Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 1: Implementation Conformance Statement (ICS)

RTS/MTS-102950-1ed171T3Conf

General Information

• Status: Published
• Publication Date: 26-Nov-2018
• Technical Committee: MTS - Methods for Testing & Specification
• Current Stage: 12 - Completion
• Due Date: 16-Nov-2018
• Completion Date: 27-Nov-2018

Standards Content (Sample)

ETSI TS 102 950-1 V1.7.1 (2018-11)






TECHNICAL SPECIFICATION
Methods for Testing and Specification (MTS);
TTCN-3 Conformance Test Suite;
Part 1: Implementation Conformance Statement (ICS)

---------------------- Page: 1 ----------------------
2 ETSI TS 102 950-1 V1.7.1 (2018-11)



Reference
RTS/MTS-102950-1ed171T3Conf
Keywords
conformance, ICS, testing, TTCN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 950-1 V1.7.1 (2018-11)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definition of terms and abbreviations . 6
3.1 Terms . 6
3.2 Abbreviations . 6
4 Conformance requirement concerning ICS . 7
Annex A (normative): TTCN-3 conformance ICS pro forma . 8
A.1 Instructions for completing the ICS pro forma. 8
A.1.1 Other information . 8
A.1.2 Purposes and structure . 8
A.1.3 Conventions . 8
A.2 Identification of the implementation . 9
A.2.1 Date of the statement . 9
A.2.2 Implementation under Test (IUT) identification . 9
A.2.3 System under Test (SUT) identification . 10
A.2.4 Product supplier . 10
A.2.5 Client . 10
A.2.6 ICS contact person. 10
A.3 ICS pro forma tables. 10
A.3.1 Global statement of conformance . 10
A.4 Additional information for ICS . 10
History . 11

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 950-1 V1.7.1 (2018-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Methods for Testing and
Specification (MTS).
The present document is part 1 of a multi-part deliverable covering a TTCN-3 conformance test suite, as identified
below:
Part 1: "Implementation Conformance Statement (ICS)";
Part 2: "Test Suite Structure and Test Purposes (TSS & TP)";
Part 3: "Abstract Test Suite (ATS) and Implementation eXtra Information for Testing (IXIT)".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 950-1 V1.7.1 (2018-11)
1 Scope
The present document provides the Implementation Conformance Statement (ICS) pro forma for the conformance test
suite for TTCN-3 as defined in ETSI ES 201 873-1 [1] in compliance with the relevant guidance given in the pro forma
for TTCN-3 reference test suite ETSI TS 102 995 (multipart). In the present document only the core language features,
specified in ETSI ES 201 873-1 [1] have been considered but not the tool implementation (see [i.1] and [i.2]), language
mapping (see [i.3], [i.4] and [i.5]) and language extension (see e.g. [i.6], [i.7] and [i.8]) aspects.
The supplier of an implementation which is claimed to conform to ETSI ES 201 873-1 [1] is required to complete a
copy of the ICS pro forma provided in the annex A of the present document.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI ES 201 873-1 (V4.9.1): "Methods for Tes
...