ETSI EN 301 366 V1.1.2 (1999-05)

Universal Personal Telecommunication (UPT); UPT phase 2; Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CADs); UPT card accepting Dual Tone Multiple Frequency (DTMF) device; Conformance test specification

DEN/NA-064009

Svetovne osebne telekomunikacije (UPT) – UPT, faza 2 – Funkcijska specifikacija vmesnika čipovne kartice (ICC) sistema UPT in naprav, ki sprejemajo to kartico (CAD) – Dvotonska večfrekvenčna (DTMF) naprava, ki sprejema kartice UPT – Specifikacija za preskušanje skladnosti

General Information

• Status: Published
• Publication Date: 13-May-1999
• Technical Committee: NA 6 - Network Intelligence and Universal Mobility
• Current Stage: 12 - Completion
• Due Date: 30-Apr-1999
• Completion Date: 14-May-1999
• Ref Project: SIST EN 301 366 V1.1.2:2003 - Universal Personal Telecommunication (UPT); UPT phase 2; Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CADs); UPT card accepting Dual Tone Multiple Frequency (DTMF) device; Conformance test specification

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 366 V1.1.2:2003
01-december-2003
6YHWRYQHRVHEQHWHOHNRPXQLNDFLMH837±837ID]D±)XQNFLMVNDVSHFLILNDFLMD
YPHVQLNDþLSRYQHNDUWLFH,&&VLVWHPD837LQQDSUDYNLVSUHMHPDMRWRNDUWLFR
&$'±'YRWRQVNDYHþIUHNYHQþQD'70)QDSUDYDNLVSUHMHPDNDUWLFH837±
6SHFLILNDFLMD]DSUHVNXãDQMHVNODGQRVWL
Universal Personal Telecommunication (UPT); UPT phase 2; Functional specification of
the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices
(CADs); UPT card accepting Dual Tone Multiple Frequency (DTMF) device;
Conformance test specification
Ta slovenski standard je istoveten z: EN 301 366 Version 1.1.2
ICS:
33.040.35 Telefonska omrežja Telephone networks
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST EN 301 366 V1.1.2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 366 V1.1.2:2003

---------------------- Page: 2 ----------------------

SIST EN 301 366 V1.1.2:2003
EN 301 366 V1.1.2 (1999-05)
European Standard (Telecommunications series)
Universal Personal Telecommunication (UPT);
UPT phase 2;
Functional specification of the interface of a UPT Integrated
Circuit Card (ICC) and Card Accepting Devices (CADs);
UPT card accepting Dual Tone Multiple Frequency (DTMF)
device;
Conformance test specification

---------------------- Page: 3 ----------------------

SIST EN 301 366 V1.1.2:2003
2 ETSI EN 301 366 V1.1.2 (1999-05)
Reference
DEN/NA-064009 (cnc00idc.PDF)
Keywords
card, DTMF, UPT
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: [phone]  Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
Individual copies of this ETSI deliverable
can be downloaded from
http://www.etsi.org
If you find errors in the present document, send your
comment to: [e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1999.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 366 V1.1.2:2003
3 ETSI EN 301 366 V1.1.2 (1999-05)
Contents
Intellectual Property Rights . 17
Foreword. 17
1 Scope. 18
2 References . 18
3 Definitions, symbols and abbreviations. 19
3.1 Definitions . 19
3.2 Symbols . 19
3.3 Abbreviations. 19
4 UPT Integrated Circuit Card part . 19
4.1 Test environment . 19
4.1.1 Test equipment. 19
4.1.1.1 CAD simulator. 19
4.1.1.2 Signal generation device. 20
4.1.1.3 Precision force-inducing contacting device . 20
4.1.1.4 Temperature controllable environment. 20
4.1.1.5 Temperature measuring device. 20
4.1.1.6 Voltage Measuring Device . 20
4.1.1.7 Precision measuring device . 20
4.1.1.8 Current measuring device . 20
4.1.2 IUT default conditions . 20
4.1.3 Default data formatting . 21
4.1.4 Test procedure. 21
4.1.5 Test requirement. 22
4.2 Test group hierarchy . 22
4.2.1 Test groups under PIM. 22
4.2.2 Test groups under PHY. 23
4.2.3 Test groups under ELEC. 23
4.2.4 Test groups under LOG. 24
4.2.5 Test groups under SEC. 24
4.2.6 Test groups under CMD. 25
4.2.7 Test groups under CEF. 25
4.3 Test procedure . 26
4.3.1 Physical characteristics . 26
4.3.1.1 Format and layout. 26
4.3.1.1.1 ID-1 card. 26
4.3.1.1.1.1 Definition and applicability. 26
4.3.1.1.1.2 Conformance requirement . 26
4.3.1.1.1.3 Test purpose . 26
4.3.1.1.1.4 Method of test . 27
4.3.1.1.1.5 Test requirement. 27
4.3.1.1.2 Plug-in card. 27
4.3.1.1.2.1 Definition and applicability. 27
4.3.1.1.2.2 Conformance requirement . 27
4.3.1.1.2.3 Test purpose . 28
4.3.1.1.2.4 Method of test . 28
4.3.1.1.2.5 Test requirement. 28
4.3.1.2 Temperature range for card operation . 28
4.3.1.2.1 Definition and applicability. 28
4.3.1.2.2 Conformance requirement. 28
4.3.1.2.3 Test purpose. 29
4.3.1.2.4 Method of test . 29
4.3.1.2.5 Test requirement . 29
4.3.1.3 Contacts. 29
4.3.1.3.1 Definition and applicability. 29
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 366 V1.1.2:2003
4 ETSI EN 301 366 V1.1.2 (1999-05)
4.3.1.3.2 Conformance requirement. 30
4.3.1.3.3 Test purpose. 30
4.3.1.3.4 Method of test . 30
4.3.1.3.5 Test requirement . 30
4.3.2 Electronic signals and transmission protocols. 30
4.3.2.1 Supply voltage Vcc (contact C1). 30
4.3.2.1.1 Voltage limits. 30
4.3.2.1.1.1 Definition and applicability. 30
4.3.2.1.1.2 Conformance requirement . 31
4.3.2.1.1.3 Test purpose . 31
4.3.2.1.1.4 Method of test . 31
4.3.2.1.1.5 Test requirement. 31
4.3.2.1.2 Current limits . 31
4.3.2.1.2.1 Definition and applicability. 31
4.3.2.1.2.2 Conformance requirement . 31
4.3.2.1.2.3 Test purpose . 32
4.3.2.1.2.4 Method of test . 32
4.3.2.1.2.5 Test requirement. 32
4.3.2.1.3 Idle current limits. 32
4.3.2.1.3.1 Definition and applicability. 32
4.3.2.1.3.2 Conformance requirement . 33
4.3.2.1.3.3 Test purpose . 33
4.3.2.1.3.4 Method of test . 33
4.3.2.1.3.5 Test requirement. 33
4.3.2.2 Reset RST (contact C2) . 33
4.3.2.2.1 Static operation . 33
4.3.2.2.1.1 Definition and applicability. 33
4.3.2.2.1.2 Conformance requirement . 33
4.3.2.2.1.3 Test purpose . 34
4.3.2.2.1.4 Method of test . 34
4.3.2.2.1.5 Test requirement. 34
4.3.2.2.2 Dynamic operation. 34
4.3.2.2.2.1 Definition and applicability. 34
4.3.2.2.2.2 Conformance requirement . 34
4.3.2.2.2.3 Test purpose . 35
4.3.2.2.2.4 Method of test . 35
4.3.2.2.2.5 Test requirement. 35
4.3.2.3 Clock CLK (contact C3). 35
4.3.2.3.1 Frequency and duty cycle. 35
4.3.2.3.1.1 Definition and applicability. 35
4.3.2.3.1.2 Conformance requirement . 35
4.3.2.3.1.3 Test purpose . 35
4.3.2.3.1.4 Method of test . 36
4.3.2.3.1.5 Test requirement. 36
4.3.2.3.2 Voltage and current. 36
4.3.2.3.2.1 Definition and applicability. 36
4.3.2.3.2.2 Conformance requirement . 36
4.3.2.3.2.3 Test purpose . 36
4.3.2.3.2.4 Method of test . 37
4.3.2.3.2.5 Test requirement. 38
4.3.2.3.3 Dynamic operation. 38
4.3.2.3.3.1 Definition and applicability. 38
4.3.2.3.3.2 Conformance requirement . 38
4.3.2.3.3.3 Test purpose . 38
4.3.2.3.3.4 Method of test . 39
4.3.2.3.3.5 Test requirement. 39
4.3.2.4 I/O (contact C7). 39
4.3.2.4.1 Voltage and current. 39
4.3.2.4.1.1 Definition and applicability. 39
4.3.2.4.1.2 Conformance requirement . 39
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 366 V1.1.2:2003
5 ETSI EN 301 366 V1.1.2 (1999-05)
4.3.2.4.1.3 Test purpose . 39
4.3.2.4.1.4 Method of test . 40
4.3.2.4.1.5 Test requirement. 40
4.3.2.4.2 Dynamic operation. 40
4.3.2.4.2.1 Definition and applicability. 40
4.3.2.4.2.2 Conformance requirement . 40
4.3.2.4.2.3 Test purpose . 40
4.3.2.4.2.4 Method of test . 41
4.3.2.4.2.5 Test requirement. 41
4.3.2.5 States . 41
4.3.2.5.1 Definition and applicability. 41
4.3.2.5.2 Conformance requirement. 41
4.3.2.5.3 Test purpose. 41
4.3.2.5.4 Method of test . 42
4.3.2.5.5 Test requirement . 42
4.3.2.6 Answer To Reset (ATR). 42
4.3.2.6.1 ATR content. 42
4.3.2.6.1.1 Definition and applicability. 42
4.3.2.6.1.2 Conformance requirement . 42
4.3.2.6.1.3 Test purpose . 43
4.3.2.6.1.4 Method of test . 43
4.3.2.6.1.5 Test requirement. 43
4.3.2.6.2 PTS procedure . 44
4.3.2.6.2.1 Definition and applicability. 44
4.3.2.6.2.2 Conformance requirement . 44
4.3.2.6.2.3 Test purpose . 44
4.3.2.6.2.4 Method of test . 44
4.3.2.6.2.5 Test requirement. 44
4.3.2.7 Major Capabilities . 44
4.3.2.7.1 Definition and applicability. 44
4.3.2.7.2 Conformance requirement. 44
4.3.2.7.3 Test purpose. 45
4.3.2.7.4 Method of test . 45
4.3.2.7.5 Test requirement . 45
4.3.3 Logical model. 45
4.3.3.1 File identifier . 45
4.3.3.1.1 File-type identification. 45
4.3.3.1.1.1 Definition and applicability. 45
4.3.3.1.1.2 Conformance requirement . 45
4.3.3.1.1.3 Test purpose . 46
4.3.3.1.1.4 Method of test . 46
4.3.3.1.1.5 Test requirement. 46
4.3.3.1.2 File ID assignments. 46
4.3.3.1.2.1 Definition and applicability. 46
4.3.3.1.2.2 Conformance requirement . 46
4.3.3.1.2.3 Test purpose . 47
4.3.3.1.2.4 Method of test . 47
4.3.3.1.2.5 Test requirement. 47
4.3.3.2 Dedicated files. 47
4.3.3.2.1 Definition and applicability. 47
4.3.3.2.2 Conformance requirement. 47
4.3.3.2.3 Test purpose. 47
4.3.3.2.4 Method of test . 47
4.3.3.2.5 Test requirement . 48
4.3.3.3 Elementary files. 48
4.3.3.3.1 Definition and applicability. 48
4.3.3.3.2 Conformance requirement. 48
4.3.3.3.3 Test purpose. 48
4.3.3.3.4 Method of test . 49
4.3.3.3.5 Test requirement . 49
ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 366 V1.1.2:2003
6 ETSI EN 301 366 V1.1.2 (1999-05)
4.3.3.4 Methods for selecting a file . 49
4.3.3.4.1 Definition and applicability. 49
4.3.3
...