ETSI EN 300 373-3 V1.1.1 (2003-10)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 3: Harmonized EN covering essential requirements under article 3.3(e) of the R&TTE Directive

DEN/ERM-TG26-027-3

Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) – Pomorski mobilni oddajniki in sprejemniki za uporabo v radiofrekvenčnih pasovih MF in HF – 3. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.3(e) direktive R&TTE

General Information

• Status: Published
• Publication Date: 29-Apr-2004
• Technical Committee: ERM TGMARINE - ERM Maritime and radio amateur activities
• Current Stage: 12 - Completion
• Due Date: 02-Jan-2004
• Completion Date: 07-Jan-2004
• Mandate: M/357
• Ref Project: SIST EN 300 373-3 V.1.1.1:2004 - Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 3: Harmonized EN covering essential requirements under article 3.3(e) of the R&TTE Directive

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.NYHQþQLKElectromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 3: Harmonized EN covering essential requirements under article 3.3(e) of the R&TTE Directive47.020.70Navigacijska in krmilna opremaNavigation and control equipment33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 300 373-3 Version 1.1.1SIST EN 300 373-3 V.1.1.1:2004en01-julij-2004SIST EN 300 373-3 V.1.1.1:2004SLOVENSKI
STANDARD



SIST EN 300 373-3 V.1.1.1:2004



ETSI EN 300 373-3 V1.1.1 (2004-01)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Maritime mobile transmitters and receiversfor use in the MF and HF bands;Part 3: Harmonized EN covering essential requirementsunder article 3.3(e) of the R&TTE Directive
SIST EN 300 373-3 V.1.1.1:2004



ETSI ETSI EN 300 373-3 V1.1.1 (2004-01) 2
Reference DEN/ERM-TG26-027-3 Keywords maritime, mobile, radio, regulation, selcall, telephony ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone]
Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [e-mail] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 300 373-3 V.1.1.1:2004



ETSI ETSI EN 300 373-3 V1.1.1 (2004-01) 3
Contents Intellectual Property Rights.8 Foreword.8 Introduction.9 1 Scope.11 2 References.11 3 Definitions, symbols and abbreviations.12 3.1 Definitions.12 3.2 Symbols.13 3.3 Abbreviations.13 4 Technical requirements specifications.13 4.1 Environmental profile.13 4.2 General, operational and technical requirements.13 4.2.1 General.13 4.2.2 General requirements.14 4.2.2.1 Composition.14 4.2.2.1.1 Audio frequencies interfaces.14 4.2.2.1.2 Digital input panels.15 4.2.2.2 Construction.15 4.2.2.3 Controls and indicators.15 4.2.2.3.1 General.15 4.2.2.3.2 Illumination.15 4.2.2.4 Labelling.16 4.2.2.4.1 General.16 4.2.2.4.2 Distress frequencies.16 4.2.2.5 Protection against mishandling.16 4.2.3 Operational requirements.16 4.2.3.1 Frequency bands.16 4.2.3.1.1 MF band.16 4.2.3.1.2 HF bands.16 4.2.3.2 Classes of emission.17 4.2.4 Warming up period.17 4.2.4.1 Time.17 4.2.4.2 Heaters.17 4.2.4.3 Heating circuits.17 4.2.4.4 Delay.17 4.2.5 Technical requirements.17 4.2.5.1 Distress controls.17 4.2.5.2 Telephony transmit control.17 4.2.5.3 Misuse.17 4.2.5.4 Control panel priority.18 4.2.5.5 Manual gain control and Automatic Gain Control (AGC).18 4.2.5.6 Output indication.18 4.3 Environmental requirements.18 4.3.1 Vibration test.18 4.3.1.1 Definition.18 4.3.1.2 Requirement.18 4.3.1.3 Conformance.18 4.3.2 Temperature tests.18 4.3.2.1 Definition.18 4.3.2.2 Dry heat.18 4.3.2.2.1 Definition.18 4.3.2.2.2 Requirement.18 4.3.2.2.3 Conformance.19 4.3.2.3 Damp heat.19 4.3.2.3.1 Definition.19 SIST EN 300 373-3 V.1.1.1:2004



ETSI ETSI EN 300 373-3 V1.1.1 (2004-01) 4
4.3.2.3.2 Requirement.19 4.3.2.3.3 Conformance.19 4.3.2.4 Low temperature cycle.19 4.3.2.4.1 Definition.19 4.3.2.4.2 Requirement.19 4.3.2.4.3 Conformance.19 4.3.3 Corrosion test.19 4.3.3.1 Definition.19 4.3.3.2 Requirement.19 4.3.3.3 Conformance.20 4.3.4 Rain test.20 4.3.4.1 Definition.20 4.3.4.2 Requirement.20 4.3.4.3 Conformance.20 4.4 Conformance requirements.20 4.4.1 Unwanted frequency modulation.20 4.4.1.1 Definition.20 4.4.1.2 Limit.20 4.4.1.3 Conformance.20 4.4.2 Sensitivity of the microphone and the 600 Ω line inputs for SSB telephony.20 4.4.2.1 Definition.20 4.4.2.2 Limits.20 4.4.2.3 Conformance.20 4.4.3 Automatic level control and/or limiter for SSB telephony.21 4.4.3.1 Definition.21 4.4.3.2 Limits.21 4.4.3.3 Conformance.21 4.4.4 Audio frequency response of SSB telephony.21 4.4.4.1 Definition.21 4.4.4.2 Limits.21 4.4.4.3 Conformance.22 4.4.5 Residual hum and noise power for telephony.22 4.4.5.1 Definition.22 4.4.5.2 Limits.22 4.4.5.3 Conformance.22 4.4.6 Residual frequency modulation on DSC.22 4.4.6.1 Definition.22 4.4.6.2 Limits.23 4.4.6.3 Conformance.23 4.4.7 Continuous operation on telephony.23 4.4.7.1 Definition.23 4.4.7.2 Limits.23 4.4.7.3 Conformance.23 4.4.8 Protection of transmitter.23 4.4.8.1 Definition.23 4.4.8.2 Limits.23 4.4.8.3 Conformance.23 4.4.9 Receiver frequency error.23 4.4.9.1 Definition.23 4.4.9.2 Limits.24 4.4.9.3 Conformance.24 4.4.10 Unwanted frequency modulation.24 4.4.10.1 Definition.24 4.4.10.2 Limits.24 4.4.10.3 Conformance.24 4.4.11 Pass band.24 4.4.11.1 Definition.24 4.4.11.2 Limits.24 4.4.11.3 Conformance.24 4.4.12 Reciprocal mixing.24 4.4.12.1 Definition.24 4.4.12.2 Limits.24 SIST EN 300 373-3 V.1.1.1:2004



ETSI ETSI EN 300 373-3 V1.1.1 (2004-01) 5
4.4.12.3 Conformance.24 4.4.13 Harmonic content in output.25 4.4.13.1 Definition.25 4.4.13.2 Limits.25 4.4.13.3 Conformance.25 4.4.14 Audio frequency intermodulation.25 4.4.14.1 Definition.25 4.4.14.2 Limits.25 4.4.14.3 Conformance.25 4.4.15 Internally generated spurious signals.25 4.4.15.1 Definition.25 4.4.15.2 Limit.25 4.4.15.3 Conformance.25 4.4.16 AGC efficiency.25 4.4.16.1 Definition.25 4.4.16.2 Limits.26 4.4.16.3 Conformance.26 4.4.17 AGC time constants (attack and recovery time).26 4.4.17.1 Definitions.26 4.4.17.2 Limits.26 4.4.17.3 Conformance.26 4.4.18 Protection of input circuits.26 4.4.18.1 Definition.26 4.4.18.2 Limits.26 4.4.18.3 Conformance.26 5 Testing for compliance with technical requirements.27 5.1 Test conditions, power supply and ambient temperatures.27 5.1.1 General.27 5.1.2 Test power source.27 5.1.3 Normal test conditions.27 5.1.3.1 Normal temperature and humidity.27 5.1.3.2 Normal test power source.27 5.1.3.2.1 Mains voltage and frequency.27 5.1.3.2.2 Secondary battery power sources.27 5.1.3.2.3 Other power sources.27 5.1.4 Extreme test conditions.28 5.1.4.1 Extreme temperature tests.28 5.1.4.2 Extreme values of test power source.28 5.1.4.2.1 Mains voltage and mains frequency.28 5.1.4.2.2 Secondary battery power sources.28 5.1.4.2.3 Other power sources.28 5.1.5 Artificial antennas.28 5.1.5.1 Transmitters.28 5.1.5.2 Receivers.28 5.1.6 Standard test signals.29 5.1.6.1 Test signals applied to the receiver input.29 5.1.6.1.1 Sources.29 5.1.6.1.2 Levels.29 5.1.6.2 Normal test signals.29 5.1.6.2.1 Class of emission J3E.29 5.1.6.2.2 Class of emission F1B.29 5.1.6.3 Choice of testing frequencies.29 5.1.7 Warming up period.
...