Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for the Network Layer of HiperMAN/WiMAX terminal devices; Part 1: Protocol Implementation Conformance Statement (PICS) proforma

DTS/BRAN-004T009-1

General Information

Status
Published
Publication Date
30-Oct-2008
Current Stage
12 - Completion
Due Date
10-Nov-2008
Completion Date
31-Oct-2008
Ref Project

Buy Standard

Standard
ETSI TS 102 624-1 V1.1.1 (2008-10) - Broadband Radio Access Networks (BRAN); HiperMAN; Conformance Testing for the Network Layer of HiperMAN/WiMAX terminal devices; Part 1: Protocol Implementation Conformance Statement (PICS) proforma
English language
20 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 102 624-1 V1.1.1 (2008-10)
Technical Specification

Broadband Radio Access Networks (BRAN);
HiperMAN;
Conformance Testing for the Network layer of
the HiperMAN/WiMAX terminal devices;
Part 1: Protocol Implementation Conformance
Statement (PICS) proforma

---------------------- Page: 1 ----------------------
2 ETSI TS 102 624-1 V1.1.1 (2008-10)



Reference
DTS/BRAN-004T009-1
Keywords
HiperMAN, layer 3, PICS, terminal, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
© WIMAX Forum 2008.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 624-1 V1.1.1 (2008-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 7
4 Conformance to this PICS Proforma Specification . 7
Annex A (normative): Protocol ICS (PICS) for HiperMAN/WiMAX terminal devices
Network layer . 8
A.1 Guidance for completing PICS Proforma. 8
A.1.1 Purposes and structure . 8
A.1.2 Abbreviations and conventions . 8
A.1.3 Instructions for completing the PICS Proforma . 10
A.2 Identification of the implementation . 10
A.2.1 Date of statement . 10
A.2.2 Implementation Under Test (IUT) identification . 10
A.2.3 System Under Test (SUT) identification . 10
A.2.4 Product supplier . 10
A.2.5 Client (if different from product supplier) . 11
A.2.6 PICS contact person . 11
A.3 Identification of the standard . 11
A.4 Global statement of conformance . 11
A.5 Mobile Station in WiMAX Network Architecture . 12
A.5.1 MS capabilities . 12
A.5.2 MS Network Discovery and Selection . 12
A.5.3 MS CSN anchored Mobility Management . 12
A.5.4 Authentication . 14
A.5.5 IPv6 over CS . 15
A.5.6 Messages . 15
Annex B (informative): Bibliography . 19
History . 20

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 624-1 V1.1.1 (2008-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Broadband Radio Access
Networks (BRAN).
The present document specifies the Protocol Implementation Conformance Statement (PICS) of the Network layer
Release 1 for High Performance radio Metropolitan Area Network (HiperMAN) and WiMAX terminal devices.
The present document is part 1 of a multi-part deliverable covering Broadband Radio Access Networks (BRAN);
HiperMAN; Conformance Testing for the Network Layer of HiperMAN/WiMAX terminal devices, as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS) proforma";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP)";
Part 3: "Abstract Test Suite (ATS)".
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 624-1 V1.1.1 (2008-10)
1 Scope
The present document specifies the Protocol Implementation Conformance Statement (PICS) proforma for WiMAX
Network Layer Release 1 per ISO/IEC 9646-7 [24], ITU-T Recommendation X.296 [25] and EG 201 058 [26] for
conformance of HiperMAN1.3.1/WiMAX compliant terminals.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] WiMAX Forum (V1.2.2): "WiMAX Forum Network Architecture; Stage 2: Architecture Tenets,
Reference Model and Reference Points, Part 1", Release 1.
NOTE: Available at
http://www.wimaxforum.org/technology/documents/WiMAX_Forum_Network_Architecture_Stage_2-
3_Rel_1v1.2.zip.
[2] WiMAX Forum (V1.2.2): "WiMAX Forum Network Architecture, Stage 2: Architecture Tenets,
Reference Model and Reference Points, Part 2", Release 1.
NOTE: Available at
http://www.wimaxforum.org/technology/documents/WiMAX_Forum_Network_Architecture_Stage_2-
3_Rel_1v1.2.zip.
[3] WiMAX Forum (V1.2.2): "WiMAX Forum Network Architecture, Stage 3: Detailed Protocols and
Procedures", Release 1.
NOTE: Available at
http://www.wimaxforum.org/technology/documents/WiMAX_Forum_Network_Architecture_Stag
e_2-3_Rel_1v1.2.zip.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 624-1 V1.1.1 (2008-10)
[4] Void.
[5] IETF RFC 5281: "Extensible Authentication Protocol Tunneled Transport Layer Security
Authenticated Protocol Version 0 (EAP-TTLSv0)".
[6] IETF RFC 2131 (March 1997): "Dynamic Host Configuration Protocol".
[7] IETF RFC 3748: "Extensible Authentication Protocol (EAP)".
[8] Void.
[9] IETF RFC 2464 (December 1998): "Transmission of IPv6 Packets over Ethernet Networks".
[10] IETF RFC 2759 (January 2000): "Microsoft PPP CHAP Extensions, Version 2".
[11] IETF RFC 5216: "The EAP-TLS Authentication Protocol".
[12] IETF RFC 3024 (January 2001): "Reverse Tunneling for Mobile IP, revised".
[13] IETF RFC 3315 (July 2003): "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)".
[14] IETF RFC 3344 (August 2002): "IP Mobility Support for IPv4".
[15] IETF RFC 3775 (June 2004): "Mobility Support in IPv6".
[16] IETF RFC 3776 (June 2004): "Using IPsec to Protect Mobile IPv6 Signaling Between Mobile
Nodes and Home Agents".
[17] IETF RFC 4187 (January 2006): "Extensible Authentication Protocol Method for 3rd Generation
Authentication and Key Agreement (EAP-AKA)".
[18] IETF RFC 4282 (December 2005): "The Network Access Identifier".
[19] Void.
[20] IETF RFC 4285 (January 2006): "Authentication Protocol for Mobile IPv6".
[21] IETF RFC 4294 (April 2006): "IPv6 Node Requirements".
[22] Void
[23] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
[24] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[25] ITU-T Recommendation X.296: "OSI conformance testing methodology and framework for
protocol Recommendations for ITU-T applications - Implementation conformance statements".
[26] ETSI EG 201 058: "Methods for Testing and Specification (MTS); Implementation Conformance
Statement (ICS) proforma style guide".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] IETF draft-ietf-mip6-hiopt-17 (May 2008): "DHCP Options for Home Information Discovery in
MIPv6".
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 624-1 V1.1.1 (2008-10)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-1 [23], WiMAX Forum
Network Architecture Stage 2 [1] and [2], WiMAX Forum Network Architecture Stage 3 [3], and ISO/IEC 9646-7 [24]
apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in WiMAX Forum Network Architecture Stage 2 [1]
and [2], WiMAX Forum Network Architecture Stage 3 [3], ISO/IEC 9646-1 [23] and the following apply:
BS Base Station
CS Common Sublayer
DAD Duplicate Address Detection
IUT Implementation Under Test
MAC Medium Access Control
MS Mobile Station
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
SUT System Under Test
4 Conformance to this PICS Proforma Specification
If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be
technically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering, naming,
and ordering of the proforma items.
A PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with
the guidance for completion given in clause A.1.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 102 624-1 V1.1.1 (2008-10)
Annex A (normative):
Protocol ICS (PICS) for HiperMAN/WiMAX terminal devices
Network layer
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Guidance for completing PICS Proforma
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined in defined in references [1], [2] and [3] may provide information about the implementation in a
standardized manner.
The PICS proforma is subdivided into subclauses for the following categories of information:
• guidance for completing the PICS proforma;
• identification and implementation;
• identification of the standard;
• global statement of conformance;
• Mobile Station (MS);
• List of messages;
• Message Fields.
A.1.2 Abbreviations and conventions
Item column
• The Item column contains a number which identifies the item in the table.
Capability column
• The capability column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
means "Is supported by the implementation?".
Reference column
• The reference column indicates the section of [1], [2] and [3] from which the requirement for the capability is
derived and in some cases also the referenced IETF RFCs referenced in the base standard.
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 102 624-1 V1.1.1 (2008-10)
Status column
• The following notations, defined in ISO/IEC 9646-1 [23], are used in the status column.
m Explicitly shown as mandatory in the standard. It is required to implement.
o Explicitly mentioned as optional in the standard or is not explicitly mentioned but has capability
negotiations. It may or may not be implemented.
oi Qualified option - for mutually exclusive or selectable options from a set. One or more of the opti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.