LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements for support of radio resource management (3GPP TS 36.133 version 13.17.0 Release 13)

RTS/TSGR-0436133vdh0

General Information

Status
Published
Publication Date
17-Oct-2019
Current Stage
12 - Completion
Completion Date
18-Oct-2019
Ref Project

Buy Standard

Standard
ETSI TS 136 133 V13.17.0 (2019-10) - LTE; Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements for support of radio resource management (3GPP TS 36.133 version 13.17.0 Release 13)
English language
2393 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 136 133 V13.17.0 (2019-10)






TECHNICAL SPECIFICATION
LTE;
Evolved Universal Terrestrial Radio Access (E-UTRA);
Requirements for support of radio resource management
(3GPP TS 36.133 version 13.17.0 Release 13)

---------------------- Page: 1 ----------------------
3GPP TS 36.133 version 13.17.0 Release 13 1 ETSI TS 136 133 V13.17.0 (2019-10)



Reference
RTS/TSGR-0436133vdh0
Keywords
LTE

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 36.133 version 13.17.0 Release 13 2 ETSI TS 136 133 V13.17.0 (2019-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Legal notice
rd
This Technical Specification (TS) has been produced by the ETSI 3 Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 36.133 version 13.17.0 Release 13 3 ETSI TS 136 133 V13.17.0 (2019-10)
Contents
Intellectual Property Rights . 2
Legal notice . 2
Modal verbs terminology . 2
Foreword . 65
1 Scope . 66
2 References . 66
3 Definitions, symbols and abbreviations . 67
3.1 Definitions . 67
3.2 Symbols . 69
3.3 Abbreviations . 70
3.4 Test tolerances . 72
3.5 Additional notation . 72
3.5.1 Groups of bands . 72
3.6 General . 74
3.6.1 Applicability of requirements in this specification version . 74
4 E-UTRAN RRC_IDLE state mobility. 78
4.1 Cell Selection . 78
4.2 Cell Re-selection . 78
4.2.1 Introduction. 78
4.2.2 Requirements . 78
4.2.2.1 Measurement and evaluation of serving cell . 79
4.2.2.2 Void. 80
4.2.2.3 Measurements of intra-frequency E-UTRAN cells . 80
4.2.2.4 Measurements of inter-frequency E-UTRAN cells . 81
4.2.2.5 Measurements of inter-RAT cells . 83
4.2.2.5.1 Measurements of UTRAN FDD cells. 84
4.2.2.5.2 Measurements of UTRAN TDD cells . 85
4.2.2.5.3 Measurements of GSM cells . 87
4.2.2.5.4 Measurements of HRPD cells . 87
4.2.2.5.5 Measurements of cdma2000 1X . 88
4.2.2.6 Evaluation of cell re-selection criteria. 89
4.2.2.7 Maximum interruption in paging reception . 90
4.2.2.8 void . 90
4.2.2.9 UE measurement capability . 90
4.2.2.9a UE measurement capability (Increased UE carrier monitoring) . 91
4.2.2.10 Reselection to CSG cells . 91
4.2.2.10.1 Reselection from a non CSG to an inter-frequency CSG cell. 91
4.2.2.10.2 Reselection from a non CSG to an inter-RAT UTRAN FDD CSG cell . 92
4.2.2.11 Void . 93
4.3 Minimization of Drive Tests (MDT) . 93
4.3.1 Introduction. 94
4.3.2 Measurements . 94
4.3.2.1 Requirements . 94
4.3.3 Relative Time Stamp Accuracy . 94
4.3.3.1 Requirements . 94
4.3.4 Relative Time Stamp Accuracy for RRC Connection Establishment Failure Log Reporting . 94
4.3.4.1 Requirements . 94
4.3.5 Relative Time Stamp Accuracy for Radio Link Failure and Handover Failure Log Reporting . 95
4.3.5.1 Requirements for timeSinceFailure. 95
4.4 MBSFN Measurements . 95
4.4.1 Introduction. 95
4.4.2 MBSFN RSRP measurements . 95
4.4.3 MBSFN RSRQ measurements . 95
4.4.4 MCH BLER measurements . 96
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 36.133 version 13.17.0 Release 13 4 ETSI TS 136 133 V13.17.0 (2019-10)
4.5 Proximity-based Services . 96
4.5.1 Introduction. 96
4.5.2 Requirements . 96
4.5.2.1 Interruptions with ProSe Direct Discovery . 96
4.5.2.2 Interruptions with ProSe Direct Communication . 96
4.5.2.3 Initiation/Cease of SLSS transmissions with ProSe Direct Discovery . 96
4.5.2.4 Initiation/Cease of SLSS transmissions with ProSe Direct Communication . 97
4.6 Cell Selection and Re-selection Requirements for UE category NB1 . 97
4.6.1 Cell Selection . 97
4.6.2 Cell Re-selection . 97
4.6.2.1 Measurement and evaluation of serving NB-IoT cell for UE category NB1 in normal coverage . 98
4.6.2.2 Measurements of intra-frequency NB-IoT cells for UE category NB1 in normal coverage . 99
4.6.2.3 Measurement and evaluation of serving NB-IoT cell for UE category NB1 in enhanced coverage . 100
4.6.2.4 Measurements of intra-frequency NB-IoT cells for UE category NB1 in enhanced coverage . 100
4.6.2.5 Measurements of inter-frequency NB cells for UE category NB1 in normal coverage . 102
4.6.2.6 Measurements of inter-frequency NB-IoT cells for UE category NB1 in enhanced coverage . 103
4.6.2.7 Maximum interruption in paging reception in normal coverage . 104
4.6.2.7A Maximum interruption in paging reception in enhanced coverage . 104
4.6.2.8 UE measurement capability . 105
4.7 Cell Selection and Re-selection Requirements for UE category M1 . 105
4.7.1 Cell Selection . 105
4.7.2 Cell Re-selection . 105
4.7.2.1 Cell Re-selection requirements for UE category M1 in normal coverage . 105
4.7.2.1.1 Measurement and evaluation of serving cell for UE category M1 in normal coverage . 105
4.7.2.1.2 Measurements of intra-frequency cells for UE category M1 in normal coverage . 105
4.7.2.2 Cell Re-selection requirements for UE category M1 in enhanced coverage . 107
4.7.2.2.1 Measurement and evaluation of serving cell for UE category M1 in enhanced coverage . 107
4.7.2.2.2 Measurements of intra-frequency cells for UE category M1 in enhanced coverage . 108
5 E-UTRAN RRC_CONNECTED state mobility . 109
5.1 E-UTRAN Handover . 110
5.1.1 Introduction. 110
5.1.2 Requirements . 110
5.1.2.1 E-UTRAN FDD – FDD . 110
5.1.2.1.1 Handover delay . 110
5.1.2.1.2 Interruption time . 110
5.2.2.2 E-UTRAN FDD – TDD . 110
5.2.2.2.1 (Void) . 111
5.2.2.2.2 (Void) . 111
5.2.2.3 E-UTRAN TDD – FDD . 111
5.2.2.3.1 (Void) . 111
5.2.2.3.2 (Void) . 111
5.2.2.4 E-UTRAN TDD – TDD . 111
5.2.2.4.1 Handover delay . 111
5.2.2.4.2 Interruption time . 111
5.2.2.5 E-UTRAN HD–FDD . 111
5.2.2.5.1 Handover delay . 112
5.2.2.5.2 Interruption time . 112
5.3 Handover to other RATs . 112
5.3.1 E-UTRAN - UTRAN FDD Handover . 112
5.3.1.1 Introduction . 112
5.3.1.1.1 Handover delay . 112
5.3.1.1.2 Interruption time . 113
5.3.2 E-UTRAN - UTRAN TDD Handover . 113
5.3.2.1 Introduction . 113
5.3.2.2 Requirements . 113
5.3.2.2.1 Handover delay . 113
5.3.2.2.2 Interruption time . 114
5.3.3 E-UTRAN - GSM Handover . 114
5.3.3.1 Introduction . 114
5.3.3.2 Requirements . 114
5.3.3.2.1 Handover delay . 114
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 36.133 version 13.17.0 Release 13 5 ETSI TS 136 133 V13.17.0 (2019-10)
5.3.3.2.2 Interruption time . 115
5.4 Handover to Non-3GPP RATs . 115
5.4.1 E-UTRAN – HRPD Handover. 115
5.4.1.1 Introduction . 115
5.4.1.1.1 Handover delay . 115
5.4.1.1.2 Interruption time . 115
5.4.2 E-UTRAN – cdma2000 1X Handover . 116
5.4.2.1 Introduction . 116
5.4.2.1.1 Handover delay . 116
5.4.2.1.2 Interruption time . 116
5.5 E-UTRAN Handover for Cat-M1 UEs . 117
5.5.1 Introduction. 117
5.5.2 Requirements in CEModeA . 117
5.5.2.1 E-UTRAN FDD – FDD for Cat-M1 FDD UEs . 117
5.5.2.1.1 Handover delay . 117
5.5.2.1.2 Interruption time . 117
5.5.2.2 E-UTRAN FDD – FDD for Cat-M1 HD – FDD UEs . 117
5.5.2.3 E-UTRAN TDD – TDD for Cat-M1 TDD UEs . 118
5.5.2.3.1 Void . 118
5.5.2.3.2 Vlid . 118
5.5.3 Requirements in CEModeB . 118
5.5.3.1 E-UTRAN FDD – FDD for Cat-M1 FDD UEs . 118
5.5.3.1.1 Handover delay . 118
5.5.3.1.2 Interruption time . 118
5.5.3.2 E-UTRAN FDD – FDD for Cat-M1 HD – FDD UEs . 119
5.5.3.3 E-UTRAN TDD – TDD for Cat-M1 TDD UEs . 119
5.6 Void . 119
6 RRC Connection Mobility Control . 119
6.1 RRC Re-establishment . 119
6.1.1 Introduction. 119
6.1.2 Requirements . 119
6.1.2.1 UE Re-establishment delay requirement . 119
6.2 Random Access . 120
6.2.1 Introduction. 120
6.2.2 Requirements . 120
6.2.2.1 Contention based random access . 120
6.2.2.1.1 Correct behaviour when receiving Random Access Response reception . 120
6.2.2.1.2 Correct behaviour when not receiving Random Access Response reception . 120
6.2.2.1.3 Correct behaviour when receiving a NACK on msg3 . 120
6.2.2.1.4 Void . 120
6.2.2.1.5 Correct behaviour when receiving a message over Temporary C-RNTI . 120
6.2.2.1.6 Correct behaviour when contention Resolution timer expires . 121
6.2.2.2 Non-Contention based random access . 121
6.2.2.2.1 Correct behaviour when receiving Random Access Response . 121
6.2.2.2.2 Correct behaviour when not receiving Random Access Response . 121
6.2.3 Requirements for Cat-M1 UEs . 121
6.3 RRC Connection Release with Redirection . 121
6.3.1 Introduction. 121
6.3.2 Requirements . 121
6.3.2.1 RRC connection release with redirection to UTRAN FDD .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.