ETSI TS 101 596-1 V6.1.1 (2018-01)

Core Network and Interoperability Testing (INT); Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Test Specification; (3GPPTM Release 12); Part 1: Protocol Implementation Conformance Statement (PICS)

RTS/INT-00141-1

General Information

• Status: Published
• Publication Date: 03-Jan-2018
• Technical Committee: INT - Core Network and Interoperability Testing
• Current Stage: 12 - Completion
• Due Date: 26-Dec-2017
• Completion Date: 04-Jan-2018

Standards Content (Sample)

ETSI TS 101 596-1 V6.1.1 (2018-01)






TECHNICAL SPECIFICATION
Core Network and Interoperability Testing (INT);
Terminating Identification Presentation (TIP) and
Terminating Identification Restriction (TIR) using
IP Multimedia (IM) Core Network (CN) subsystem;
Conformance Test Specification;
TM
(3GPP Release 12);
Part 1: Protocol Implementation Conformance
Statement (PICS)

---------------------- Page: 1 ----------------------
2 ETSI TS 101 596-1 V6.1.1 (2018-01)



Reference
RTS/INT-00141-1
Keywords
conformance, IMS, PICS, testing, TIP, TIR
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2018.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
GSM® and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 101 596-1 V6.1.1 (2018-01)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 6
4 Conformance to this PICS pro forma specification . 6
4.0 The right to copy . 6
4.1 Guidance for completing the PICS pro forma . 7
4.1.0 Introduction. 7
4.1.1 Purposes and structure . 7
4.1.2 Abbreviations and conventions . 7
4.1.3 Instructions for completing the PICS pro forma . 8
4.2 Introduction . 9
4.2.0 Identification of the implementation . 9
4.2.1 Date of the statement . 9
4.2.2 Implementation Under Test (IUT) identification . 9
4.2.3 System Under Test (SUT) identification . 9
4.2.4 Product supplier . 9
4.2.5 Client (if different from product supplier) . 10
4.2.6 PICS contact person . 10
4.3 Identification of the ETSI TS 124 608 . 11
4.3.0 Introduction. 11
4.4 Global statement of conformance . 11
4.5 Roles . 11
4.6 User role . 11
4.6.0 Introduction. 11
4.6.1 Major capabilities . 12
4.7 Network role . 12
4.7.0 Introduction. 12
4.7.1 Major capabilities . 12
History . 14


ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 101 596-1 V6.1.1 (2018-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability
Testing (INT).
The present document is part 1 of a multi-part deliverable covering the Terminating Identification Presentation (TIP)
and Terminating Identification Restriction (TIR) using IP Multimedia (IM) Core Network (CN) subsystem;
Conformance Test Specification, as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS)";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP)".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and
options have been implemented for a telecommunication specification. Such a statement is called a Protocol
Implementation Conformance Statement (PICS).

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 101 596-1 V6.1.1 (2018-01)
1 Scope
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for the Digital
cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE;
Terminating Identification Presentation (TIP) and Terminating Identification Restriction (TIR) using IP Multimedia
(IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.608 Release 12) defined in ETSI
TS 124 608 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in
ISO/IEC 9646-7 [4] and ETSI ETS 300 406 [2].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 124 608 (V12.0.0): "Digital cellular telecommunications system (Phase 2+); Universal
Mobile Telecommunications System (UMTS); LTE; Terminating Identification Presentation (TIP)
and Terminating Identification Restriction (TIR) using IP Multimedia (IM) Core Network (CN)
subsystem; Protocol specification (3GPP TS 24.608 version 12.0.0 Release 12)".
[2] ETSI ETS 300 406 (04-1995): "Methods for testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[3] ISO/IEC 9646-1: "Information technology -- Open systems interconnection -- Conformance
testing methodology and framework -- Part 1: General concepts".
[4] ISO/IEC 9646-7: "Information technology -- Open systems interconnection -- Conformance
testing methodology and framework -- Part 7: Implementation Conformance Statements".
[5] ETSI TS 124 604: "Digital cellular telecommunications system (Phase 2+) (GSM); Universal
Mobile Telecommunications System (UMTS); LTE; Communication Diversion (CDIV) using IP
Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.604)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
Not applicable.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 101 596-1 V6.1.1 (2018-01)
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI TS 124 608 [1], ISO/IEC 9646-1 [3],
ISO/IEC 9646-7 [4] and the following apply:
ICS pro forma: document, in the form of a questionnaire, which when completed for an implementation or system
becomes an ICS
Implementation Conformance Statement (ICS): statement made by the supplier of an implementation or system
claimed to conform to a given specification, stating which capabilities have been implemented
NOTE: The ICS can take several forms: protocol ICS, profile ICS, profile specific ICS, information object ICS,
etc.
Protocol ICS (PICS): ICS for an implementation or system claimed to conform to a given protocol specification
NOTE: This may contain additional information.
3.2 Symbols
For the purposes of the present document, the symbols given in ETSI TS 124 608 [1] apply.
3.3 Abbreviations
For the purposes of the present document, the abbreviations given in ETSI TS 124 608 [1] and the following apply:
CN Core Network
ICS Implementation Conformance Statement
IM IP Multimedia
IP Internet Protocol
IUT Implementation Under Test
PDU Protocol Data Unit
PICS Protocol ICS
SCS System Conformitation Statement
SUT System Under Test
TIP Terminating Identification Presentation
TIR Terminating Identification Restriction
UMTS Universal Mobile Telecommunications System
URI Universal Resource Identifier
4 Conformance to this PICS pro forma specification
4.0 The right to copy
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the ICS proforma in this clause so that it can be used for its
intended purposes and may further publish the completed ICS.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 101 596-1 V6.1.1 (2018-01)
4.1 Guidance for complet
...