ETSI TS 103 191-1 V1.1.1 (2015-09)

Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Signal Phase And Timing (SPAT) and Map (MAP); Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma

DTS/ITS-00139

General Information

• Status: Published
• Publication Date: 09-Sep-2015
• Technical Committee: ITS WG1 - Application Requirements and Services
• Current Stage: 12 - Completion
• Due Date: 05-Oct-2015
• Completion Date: 10-Sep-2015

Standards Content (Sample)

ETSI TS 103 191-1 V1.1.1 (2015-09)






TECHNICAL SPECIFICATION
Intelligent Transport Systems (ITS);
Testing;
Conformance test specifications for
Signal Phase And Timing (SPAT) and Map (MAP);
Part 1: Test requirements and Protocol Implementation
Conformance Statement (PICS) pro forma

---------------------- Page: 1 ----------------------
2 ETSI TS 103 191-1 V1.1.1 (2015-09)



Reference
DTS/ITS-00139
Keywords
ITS, PICS, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 103 191-1 V1.1.1 (2015-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Conformance requirement concerning PICS . 6
Annex A (normative): MAP-SPAT PICS pro forma . 7
A.1 Partial cancellation of copyright . 7
A.2 Guidance for completing the ICS pro forma . 7
A.2.1 Purposes and structure . 7
A.2.2 Abbreviations and conventions . 7
A.2.3 Instructions for completing the ICS pro forma . 9
A.3 Identification of the implementation . 9
A.3.1 Introduction . 9
A.3.2 Date of the statement . 9
A.3.3 Implementation Under Test (IUT) identification . 9
A.3.4 System Under Test (SUT) identification . 9
A.3.5 Product supplier . 10
A.3.6 Client (if different from product supplier) . 10
A.3.7 ICS contact person. 11
A.4 Identification of the protocol . 11
A.5 Global statement of conformance . 11
A.6 Tables . 11
A.6.1 Introduction . 11
A.6.2 Station type . 11
A.6.3 RSU EU profile . 12
Annex B (informative): Bibliography . 13
History . 14

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 103 191-1 V1.1.1 (2015-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems
(ITS).
The present document is part 1 of a multi-part deliverable covering Conformance test specification for Signal Phase
And Timing (SPAT) and Map (MAP), as identified below:
Part 1: "Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma";
Part 2: "Test Suite Structure and Test Purposes (TSS & TP)";
Part 3: "Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)".
The development of ITS test specifications follows the guidance provided in the ETSI EG 202 798 [i.1]. Therefore, the
ATS documentation outlined in the present document is also based on the guidance provided in ETSI EG 202 798 [i.1].
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 103 191-1 V1.1.1 (2015-09)
1 Scope
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for
Conformance test specification for MAP-SPAT Messages (MAP-SPAT) as defined in SAE J2735 [1] in compliance
with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4].
The objective of the present document is to provide a basis for conformance tests for MAP-SPAT Messages
(MAP-SPAT) equipment giving a high probability of interoperability between different manufacturers' equipment.
The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [2] and ISO/IEC 9646-2 [3]) as well as
the ETSI rules for conformance testing (ETSI ETS 300 406 [5]) are used as a basis for the test methodology.
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] SAE J2735 (2015-04-30): "Dedicated Short Range Communications (DSRC) Message Set
Dictionary".
[2] ISO/IEC 9646-1 (1994): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 1: General concepts".
[3] ISO/IEC 9646-2 (1994): "Information technology -- Open Systems Interconnection --
Conformance testing methodology and framework -- Part 2: Abstract Test Suite specification".
[4] ISO/IEC 9646-7 (1995): "Information technology -- Open Systems Interconnection --
Conformance testing methodology and framework -- Part 7: Implementation Conformance
Statements".
[5] ETSI ETS 300 406 (1995): "Methods for testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[6] ETSI TS 102 894-2 (V1.2.1): "Intelligent Transport Systems (ITS); Users and applications
requirements; Part 2: Applications and facilities layer common data dictionary".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI EG 202 798 (V1.1.1): "Intelligent Transport Systems (ITS); Testing; Framework for
conformance and interoperability testing".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 103 191-1 V1.1.1 (2015-09)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in SAE J2735 [1], ISO/IEC 9646-1 [2] and
ISO/IEC 9646-7 [4] apply.
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
ATS Abstract Test Suite
DSRC Dedicated Short Range Communications
EU European Union
ICS Implementation Conformance Statement
ISO International Organization for Standardization
ITS Intelligent Transport Systems
IUT Implementation Under Test
MAP MapData Messages
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
RSU Road Side Unit
SAE Society of Automotive Engineers
SPAT Signal Phase And Timing Messages
SUT System Under Test
TP Test Purpose
TS Technical Specification
TSS Test Suite Structure
4 Conformance requirement concerning PICS
If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be
technically equivalent to the text of the PICS pro forma given in annex A, and shall preserve the numbering, naming
and ordering of the pro forma items.
An ICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with
the instructions for completion given in clause A.2.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 103 191-1 V1.1.1 (2015-09)
Annex A (normative):
MAP-SPAT PICS pro forma
A.1 Partial cancellation of copyright
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the MAP-SPAT PICS pro forma in this annex so that it can be used
for its intended purposes and may further publish the completed MAP-SPAT PICS.

A.2 Guidance for completing the ICS pro forma
A.2.1 Purposes and structure
The purpose of this PICS pro forma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined in SAE J2735 [1] may provide information about the implementation in a standardized manner.
The PICS pro forma is subdivided into clauses for the following categories of information:
• guidance for completing the ICS pro forma;
• identification of the implementation;
• identification of the SAE J2735 [1];
• global statement of conformance;
• PICS pro forma tables.
A.2.2 Abbreviations and conventions
The ICS pro forma contained in this annex is comprised of information in tabular form in accordance with the
guidelines presented in ISO/IEC 9646-7 [4].
The
...