ETSI ETS 300 770-2 ed.1 (1998-05)

Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Closed User Group (CUG) supplementary service; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

DE/SPS-05100-2

Širokopasovno digitalno omrežje z integriranimi storitvami (B-ISDN) - Protokol digitalne naročniške signalizacije št. 2 (DSS2) - Dopolnilna storitev: zaprta skupina uporabnikov (CUG) - 2. del: Izjava o skladnosti izvedbe protokola (PICS) - Proforma specifikacije

General Information

• Status: Published
• Publication Date: 19-May-1998
• Technical Committee: SPS 5 5 - Broadband ISDN, Layer 3
• Current Stage: 12 - Completion
• Due Date: 05-Jun-1998
• Completion Date: 20-May-1998
• Ref Project: SIST ETS 300 770-2:1998 - Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Closed User Group (CUG) supplementary service; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Closed User Group (CUG) supplementary service; Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 770-2 E13SIST ETS 300 770-2:1998en01-DSULO19983SIST ETS 300 770-2:1998SLOVENSKI
STANDARD



SIST ETS 300 770-2:1998



DRAFTEUROPEANprETS 300 770-2TELECOMMUNICATIONOctober 1996STANDARDSource: ETSI TC-SPSReference: DE/SPS-05100-2ICS:33.080Key words:B-ISDN, DSS2, supplementary service, CUG, PICSBroadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol;Closed User Group (CUG) supplementary service;Part 2: Protocol Implementation Conformance Statement (PICS)proforma specificationETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 770-2:1998



Page 2Draft prETS 300 770-2: October 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 770-2:1998



Page 3Draft prETS 300 770-2: October 1996ContentsForeword.51Scope.72Normative references.73Definitions.84Abbreviations.85Conformance.8Annex A (normative):PICS proforma.9A.1Instructions for completing the PICS proforma.9A.1.1Identification of the implementation.9A.1.2Global statement of conformance.9A.1.3Explanation of PICS proforma subclauses.9A.1.4Symbols, abbreviations and terms.10A.2Identification of the implementation.10A.2.1Date of the statement.10A.2.2Implementation Under Test (IUT) identification.10A.2.3System Under Test (SUT) identification.10A.2.4Product supplier.11A.2.5Client.11A.2.6PICS contact person.12A.3PICS/System Conformance Statement (SCS).12A.4Identification of the protocol.12A.5Global statement of conformance.13A.6Roles.13A.7User.14A.7.1Major capabilities.14A.7.2Subsidiary capabilities.14A.7.3Protocol data units.14A.7.4Protocol data unit parameters.14A.7.5Timers.15A.7.6Call states.15A.8Network.16A.8.1Type of implementation.16A.8.2Major capabilities.16A.8.3Subsidiary capabilities.16A.8.4Protocol data units.17A.8.5Protocol data unit parameters.17A.8.6Timers.18A.8.7Call states.18SIST ETS 300 770-2:1998



Page 4Draft prETS 300 770-2: October 1996Annex B (normative):Requirements list.19B.1User.19B.1.1Requirements on items used in the basic call PICS.19B.2Network.19B.2.1Requirements on items used in the basic call PICS.19History.20SIST ETS 300 770-2:1998



Page 5Draft prETS 300 770-2: October 1996ForewordThis draft European Telecommunication Standard (ETS) has been produced by the Signalling Protocolsand Switching (SPS) Technical Committee of the European Telecommunications Standards Institute(ETSI), and is now submitted for the Public Enquiry phase of the ETSI standards approval procedure.This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. two(DSS2) protocol specification for the Broadband Integrated Services Digital Network (B-ISDN) ClosedUser Group (CUG) supplementary service, as described below:Part 1:"Protocol specification";Part 2:"Protocol Implementation Conformance Statement (PICS) proforma specification";Part 3:"Test Suite Structure and Test Purposes (TSS&TP) specification for the user";Part 4:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing(PIXIT) proforma specification for the user";Part 5:"TSS&TP specification for the network";Part 6:"ATS and partial PIXIT proforma specification for the network".NOTE:The final structure of the parts containing the test specifications is currently understudy.To evaluate conformance of a particular implementation, it is necessary to have a statement of whichcapabilities and options have been implemented for a given Open Systems Interconnection (OSI)protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).Proposed transposition datesDate of latest announcement of this ETS (doa):3 months after ETSI publicationDate of latest publication of new National Standardor endorsement of this ETS (dop/e):6 months after doaDate of withdrawal of any conflicting National Standard (dow):6 months after doaSIST ETS 300 770-2:1998



Page 6Draft prETS 300 770-2: October 1996Blank pageSIST ETS 300 770-2:1998



Page 7Draft prETS 300 770-2: October 19961ScopeThis second part of ETS 300 770 is applicable to the stage three of the Closed User Group (CUG)supplementary service for the pan-European Broadband Integrated Services Digital Network (B-ISDN) asprovided by European public telecommunications operators at the TB reference point or coincident SB andTB reference point (as defined in ITU-T Recommendation I.413 [7]) by means of the Digital SubscriberSignalling System No. two (DSS2) protocol. Stage three identifies the protocol procedures and switchingfunctions needed to support a telecommunications service (see CCITT Recommendation I.130 [6]).This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the B-ISDNDSS2 CUG supplementary service protocol as specified in ETS 300 770-1 [3] in compliance with therelevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [5].The supplier of a protocol implementation which is claimed to conform to ETS 300 770-1 [3] is required tocomplete a copy of the PICS proforma provided in annex A of this ETS and is required to provide theinformation necessary to identify both the supplier and the implementation.2Normative referencesThis ETS incorporates by dated and undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 443-1: "Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol, B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 1:Protocol specification [ITU-T Recommendation Q.2931 (1995), modified]".[2]ETS 300 443-2: "Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-network interface layer 3 specification for basic call/bearer control; Part 2:Protocol Implementation Conformance Statement (PICS) proformaspecification".[3]ETS 300 770-1: "Broadband Integrated Services Digital Network (B-ISDN);Digital Subscriber Signalling System No. two (DSS2) protocol; Closed UserGroup (CUG) supplementary service; Part 1: Protocol specification [ITU-TRecommendation Q.2955.1, modified]".[4]ISO/IEC 9646-1: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 1: General concepts".[5]ISO/IEC 9646-7: "Information technology - Open systems interconnection -Conformance testing methodology and framework - Part 7: ImplementationConformance Statements".[6]CCITT Recommendation I.130 (1988): "Method for the characterization oftelecommunication services supported by an ISDN and network capabilities ofan ISDN".[7]ITU-T Recommendation I.413 (1993): "B-ISDN user-network interfaces".SIST ETS 300 770-2:1998



Page 8Draft prETS 300 770-2: October 19963DefinitionsFor the purposes of this ETS, the following definitions apply, in addition to those given inETS 300 770-1 [3]:Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of anOpen Systems Interconnection (OSI) implementation or system, stating which capabilities have beenimplemented for a given OSI protocol (see ISO/IEC 9646-1 [4]).PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier orconformance test suite specifier, which, when completed for an OSI implementation or system becomesthe PICS (see ISO/IEC 9646-1 [4]).static conformance review: A review of the extent to which the static conformance requirements are metby the Implementation Under Test (IUT), accomplished by comparing the PICS with the staticconformance requirements expressed in the relevant standard(s) (see ISO/IEC 9646-1 [4]).4AbbreviationsFor the purposes of this ETS, the following abbreviations apply:ANDBoolean "and"B-ISDNBroadband Integrated Services Digital NetworkCConditional requirement (to be observed if the relevant conditions apply)CUGClosed User GroupDSS2Digital Subscriber Signalling System No. twoIERInformation Elements ReceivedIETInformation Elements TransmittedIUTImplementation Under TestMMandatory requirement (to be observed in all cases)MCMajor CapabilitiesN/ANot applicable, not supported or the conditions for status are not metNonot supportedNOTBoolean "not"OOption (may be selected to suit the implementation, provided that anyrequirements applicable to the option are observed)O.nOptions, but support required for either at least one or only one of the options inthe group labelled with the same numeral "n"ORBoolean "or"OSIOpen Systems InterconnectionPParametersPICSProtocol Implementation Conformance StatementRRoleSCSubsidiary CapabilitiesSCSSystem Conformance StatementSUTSystem Under TestTIType of ImplementationYessupported5ConformanceA PICS proforma which conforms to this PICS proforma specification shall be technically equivalent toannex A, and shall preserve the numbering and ordering of the items in annex A.A PICS which conforms to this PICS proforma specification shall:a)describe an implementation which claims to conform to ETS 300 770-1 [3];b)be a conforming ICS proforma which has been completed in accordance with the instructions forcompletion given in clause A.1;c)include the information necessary to uniquely identify both the supplier and the
implementation.SIST ETS 300 770-2:1998



Page 9Draft prETS 300 770-2: October 1996Annex A (normative):PICS proformaNotwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants thatusers of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for itsintended purposes and may further publish the completed PICS.A.1Instructions for completing the PICS proformaA.1.1Identification of the implementationIdentification of the Implementation Under Test (IUT) and the system in which it resides (the SystemUnder Test (SUT)) should be filled in so as to provide as much detail as possible regarding versionnumbers and configuration options.The product supplier information and client information should both be filled in if they are different.A person who can answer queries regarding information supplied in the PICS should be named as thecontact person.The SCS as defined in ISO/IEC 9646-1 [4] is a document supplied by the client or product supplier thatsummarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or otherstandards are implemented and to which conformance is claimed. The PICS/SCS subclause shoulddescribe the relationship of the PICS to the SCS.A.1.2Global statement of conformanceIf the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completedto facilitate selection of test cases for optional functions.If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed,and all non-supported mandatory capabilities should be identified and explained. Explanations may beentered in the comments field at the bottom of each table or on attached sheets of paper.A.1.3Explanation of PICS proforma subclausesThe PICS proforma contains a Roles clause and thereafter is presented in two parts (for user andnetwork) with the following subclauses, as required:-major capabilities;-subsidiary capabilities;-protocol data unit support;-protocol data unit parameters;-timers;-call states.The User clause shall only be completed for user implementations (including private networkimplementations) while the Network clause shall only be completed for network implementations. TheRoles subclause shall be completed for all implementations.The relationship between this PICS proforma and other related PICS proforma
...

SLOVENSKI STANDARD
SIST ETS 300 770-2:1998
01-september-1998
âLURNRSDVRYQRGLJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL%,6'13URWRNRO
GLJLWDOQHQDURþQLãNHVLJQDOL]DFLMHãW'66'RSROQLOQDVWRULWHY]DSUWDVNXSLQD
XSRUDEQLNRY&8*GHO,]MDYDRVNODGQRVWLL]YHGEHSURWRNROD3,&6
3URIRUPDVSHFLILNDFLMH
Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling
System No. two (DSS2) protocol; Closed User Group (CUG) supplementary service; Part
2: Protocol Implementation Conformance Statement (PICS) proforma specification
Ta slovenski standard je istoveten z: ETS 300 770-2 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 770-2:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 770-2:1998

---------------------- Page: 2 ----------------------

SIST ETS 300 770-2:1998
EUROPEAN ETS 300 770-2
TELECOMMUNICATION May 1998
STANDARD
Source: SPS Reference: DE/SPS-05100-2
ICS: 33.020
Key words: B-ISDN, DSS2, supplementary service, CUG, PICS
Broadband Integrated Services Digital Network (B-ISDN);
Digital Subscriber Signalling System No. two (DSS2) protocol;
Closed User Group (CUG) supplementary service;
Part 2: Protocol Implementation Conformance Statement (PICS)
proforma specification
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Internet: [e-mail] - http://www.etsi.fr - http://www.etsi.org
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 770-2:1998
Page 2
ETS 300 770-2: May 1998
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Standards Making Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 770-2:1998
Page 3
ETS 300 770-2: May 1998
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions.8
4 Abbreviations.8
5 Conformance.8
Annex A (normative): PICS proforma.9
A.1 Instructions for completing the PICS proforma .9
A.1.1 Identification of the implementation .9
A.1.2 Global statement of conformance.9
A.1.3 Explanation of PICS proforma subclauses .9
A.1.4 Symbols, abbreviations and terms.10
A.2 Identification of the implementation.10
A.2.1 Date of the statement .10
A.2.2 Implementation Under Test (IUT) identification .10
A.2.3 System Under Test (SUT) identification .10
A.2.4 Product supplier.11
A.2.5 Client.11
A.2.6 PICS contact person.12
A.3 PICS/System Conformance Statement (SCS).12
A.4 Identification of the protocol .12
A.5 Global statement of conformance .13
A.6 Roles .13
A.7 User.14
A.7.1 Major capabilities .14
A.7.2 Subsidiary capabilities.14
A.7.3 Protocol data units .14
A.7.4 Protocol data unit parameters.14
A.7.5 Timers.15
A.7.6 Call states .15
A.8 Network .16
A.8.1 Type of implementation .16
A.8.2 Major capabilities .16
A.8.3 Subsidiary capabilities.16
A.8.4 Protocol data units .17
A.8.5 Protocol data unit parameters.17
A.8.6 Timers.18
A.8.7 Call states .18
Annex B (normative): Requirements list.19
B.1 User.19

---------------------- Page: 5 ----------------------

SIST ETS 300 770-2:1998
Page 4
ETS 300 770-2: May 1998
B.1.1 Requirements on items used in the basic call PICS . 19
B.2 Network. 19
B.2.1 Requirements on items used in the basic call PICS . 19
History. 20

---------------------- Page: 6 ----------------------

SIST ETS 300 770-2:1998
Page 5
ETS 300 770-2: May 1998
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols and
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI).
This ETS is part 2 of a multi-part standard covering the Digital Subscriber Signalling System No. two
(DSS2) protocol specification for the Broadband Integrated Services Digital Network (B-ISDN) Closed
User Group (CUG) supplementary service, as described below:
Part 1: "Protocol specification";
Part 2: "Protocol Implementation Conformance Statement (PICS) proforma specification";
Part 3: "Test Suite Structure and Test Purposes (TSS&TP) specification for the user";
Part 4: "Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing
(PIXIT) proforma specification for the user";
Part 5: "TSS&TP specification for the network";
Part 6: "ATS and partial PIXIT proforma specification for the network".
NOTE: The final structure of the parts containing the test specifications is currently under
study.
To evaluate conformance of a particular implementation, it is necessary to have a statement of which
capabilities and options have been implemented for a given Open Systems Interconnection (OSI)
protocol. Such a statement is called a Protocol Implementation Conformance Statement (PICS).
Transposition dates
Date of adoption of this ETS: 22 May 1998
Date of latest announcement of this ETS (doa): 31 August 1998
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 28 February 1999
Date of withdrawal of any conflicting National Standard (dow): 28 February 1999

---------------------- Page: 7 ----------------------

SIST ETS 300 770-2:1998
Page 6
ETS 300 770-2: May 1998
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 770-2:1998
Page 7
ETS 300 770-2: May 1998
1 Scope
This second part of ETS 300 770 is applicable to the stage three of the Closed User Group (CUG)
supplementary service for the pan-European Broadband Integrated Services Digital Network (B-ISDN) as
provided by European public telecommunications operators at the T reference point or coincident S and
B B
T reference point (as defined in ITU-T Recommendation I.413 [7]) by means of the Digital Subscriber
B
Signalling System No. two (DSS2) protocol. Stage three identifies the protocol procedures and switching
functions needed to support a telecommunications service (see CCITT Recommendation I.130 [6]).
This ETS provides the Protocol Implementation Conformance Statement (PICS) proforma for the B-ISDN
DSS2 CUG supplementary service protocol as specified in ETS 300 770-1 [3] in compliance with the
relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [5].
The supplier of a protocol implementation which is claimed to conform to ETS 300 770-1 [3] is required to
complete a copy of the PICS proforma provided in annex A of this ETS and is required to provide the
information necessary to identify both the supplier and the implementation.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 443-1: "Broadband Integrated Services Digital Network (B-ISDN);
Digital Subscriber Signalling System No. two (DSS2) protocol, B-ISDN user-
network interface layer 3 specification for basic call/bearer control; Part 1:
Protocol specification [ITU-T Recommendation Q.2931 (1995), modified]".
[2] ETS 300 443-2: "Broadband Integrated Services Digital Network (B-ISDN);
Digital Subscriber Signalling System No. two (DSS2) protocol; B-ISDN user-
network interface layer 3 specification for basic call/bearer control; Part 2:
Protocol Implementation Conformance Statement (PICS) proforma
specification".
[3] ETS 300 770-1: "Broadband Integrated Services Digital Network (B-ISDN);
Digital Subscriber Signalling System No. two (DSS2) protocol; Closed User
Group (CUG) supplementary service; Part 1: Protocol specification [ITU-T
Recommendation Q.2955.1 (1996), modified]".
[4] ISO/IEC 9646-1: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 1: General concepts".
[5] ISO/IEC 9646-7: "Information technology - Open systems interconnection -
Conformance testing methodology and framework - Part 7: Implementation
Conformance Statements".
[6] CCITT Recommendation I.130 (1988): "Method for the characterization of
telecommunication services supported by an ISDN and network capabilities of
an ISDN".
[7] ITU-T Recommendation I.413 (1993): "B-ISDN user-network interfaces".

---------------------- Page: 9 ----------------------

SIST ETS 300 770-2:1998
Page 8
ETS 300 770-2: May 1998
3 Definitions
For the purposes of this ETS, the following definitions apply, in addition to those given in
ETS 300 770-1 [3]:
Protocol Implementation Conformance Statement (PICS): A statement made by the supplier of an
Open Systems Interconnection (OSI) implementation or system, stating which capabilities have been
implemented for a given OSI protocol (see ISO/IEC 9646-1 [4]).
PICS proforma: A document, in the form of a questionnaire, designed by the protocol specifier or
conformance test suite specifier, which, when completed for an OSI implementation or system becomes
the PICS (see ISO/IEC 9646-1 [4]).
static conformance review: A review of the extent to which the static conformance requirements are met
by the Implementation Under Test (IUT), accomplished by comparing the PICS with the static
conformance requirements expressed in the relevant standard(s) (see ISO/IEC 9646-1 [4]).
4 Abbreviations
For the purposes of this ETS, the following abbreviations apply:
AND Boolean "and"
B-ISDN Broadband Integrated Services Digital Network
C Conditional requirement (to be observed if the relevant conditions apply)
CUG Closed User Group
DSS2 Digital Subscriber Signalling System No. two
IER Information Elements Received
IET Information Elements Transmitted
IUT Implementation Under Test
M Mandatory requirement (to be observed in all cases)
MC Major Capabilities
N/A Not applicable, not supported or the conditions for status are not met
No not supported
NOT Boolean "not"
O Option (may be selected to suit the implementation, provided that any
requirements applicable to the option are observed)
O.n Options, but support required for either at least one or only one of the options in
the group labelled with the same numeral "n"
OR Boolean "or"
OSI Open Systems Interconnection
P Parameters
PICS Protocol Implementation Conformance Statement
R Role
SC Subsidiary Capabilities
SCS System Conformance Statement
SUT System Under Test
TI Type of Implementation
Yes supported
5 Conformance
A PICS proforma which conforms to this PICS proforma specification shall be technically equivalent to
annex A, and shall preserve the numbering and ordering of the items in annex A.
A PICS which conforms to this PICS proforma specification shall:
a) describe an implementation which claims to conform to ETS 300 770-1 [3];
b) be a conforming ICS proforma which has been completed in accordance with the instructions for
completion given in clause A.1;
c) include the information necessary to uniquely identify both the supplier and the implementation.

---------------------- Page: 10 ----------------------

SIST ETS 300 770-2:1998
Page 9
ETS 300 770-2: May 1998
Annex A (normative): PICS proforma
Notwithstanding the provisions of the copyright clause related to the text of this ETS, ETSI grants that
users of this ETS may freely reproduce the PICS proforma in this annex so that it can be used for its
intended purposes and may further publish the completed PICS.
A.1 Instructions for completing the PICS proforma
A.1.1 Identification of the implementation
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System
Under Test (SUT)) should be filled in so as to provide as much detail as possible regarding version
numbers and configuration options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the PICS should be named as the
contact person.
The SCS as defined in ISO/IEC 9646-1 [4] is a document supplied by the client or product supplier that
summarizes which OSI International Standards, ITU-T (CCITT) Recommendations, ETSs or other
standards are implemented and to which conformance is claimed. The PICS/SCS subclause should
describe the relationship of the PICS to the SCS.
A.1.2 Global statement of conformance
If the answer to the statement in this subclause is "Yes", all subsequent subclauses should be completed
to facilitate selection of test cases for optional functions.
If the answer to the statement in this subclause is "No", all subsequent subclauses should be completed,
and all non-supported mandatory capabilities should be identified and explained. Explanations may be
entered in the comments field at the bottom of each table or on attached sheets of paper.
A.1.3 Explanation of PICS proforma subclauses
The PICS proforma contains a Roles clause and thereafter is presented in two parts (for user and
network) with the following subclauses, as required:
- major capabilities;
- subsidiary capabilities;
- protocol data unit support;
- protocol data unit parameters;
- timers;
- call states.
The User clause shall only be completed for user implementations (including private network
implementations) while the Network clause shall only be completed for network implementations. The
Roles subclause shall be completed for all implementations.
The relationship between this PICS proforma and other related PICS proforma (e.g. the basic call PICS
proforma) is expressed in the requirements list contained in annex B. This provides the additional
restrictions placed o
...