ETSI TS 102 859-1 V1.2.1 (2014-04)

Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Transmission of IP packets over GeoNetworking; Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) proforma

RTS/ITS-0030029

General Information

• Status: Published
• Publication Date: 06-Apr-2014
• Technical Committee: ITS WG3 - Transport and Network
• Current Stage: 12 - Completion
• Due Date: 02-May-2014
• Completion Date: 07-Apr-2014

Standards Content (Sample)

ETSI TS 102 859-1 V1.2.1 (2014-04)






Technical Specification
Intelligent Transport Systems (ITS);
Testing;
Conformance test specifications for Transmission of
IP packets over GeoNetworking;
Part 1: Test requirements and Protocol Implementation
Conformance Statement (PICS) proforma

---------------------- Page: 1 ----------------------
2 ETSI TS 102 859-1 V1.2.1 (2014-04)



Reference
RTS/ITS-0030029
Keywords
IP, ITS, network, PICS, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 859-1 V1.2.1 (2014-04)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 5
3.1 Definitions . 5
3.2 Abbreviations . 6
4 Conformance requirement concerning PICS . 6
Annex A (normative): IPV6overGEONETW PICS Proforma . 7
A.1 Guidance for completing the ICS proforma . 7
A.1.1 Purposes and structure . 7
A.1.2 Abbreviations and conventions . 7
A.1.3 Instructions for completing the ICS proforma . 9
A.2 Identification of the implementation . 9
A.2.1 Date of the statement . 9
A.2.2 Implementation Under Test (IUT) identification . 9
A.2.3 System Under Test (SUT) identification . 10
A.2.4 Product supplier . 10
A.2.5 Client (if different from product supplier) . 11
A.2.6 ICS contact person. 11
A.3 Identification of the protocol . 12
A.4 Global statement of conformance . 12
A.5 Tables . 12
A.5.1 ITS Station type . 12
A.5.1.1 IPv6OverGeonetW sub layer . 12
A.5.1.2 Router type. 12
A.5.2 Virtual links . 13
A.5.3 Virtual network interfaces . 13
A.5.4 Primitives Associated . 13
A.5.5 Packet Delivery . 13
A.5.6 IPv6 . 14
A.5.6.1 IPv6 multicast . 14
A.5.7 IPv6 neighbour discovery support . 14
A.5.7.1 Address configuration . 14
A.5.7.2 Address resolution . 14
A.5.7.3 Constants . 15
A.5.8 Protocol parameters . 15
A.5.8.1 itsgn6aslVLEntry . 15
History . 16

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 859-1 V1.2.1 (2014-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Intelligent Transport Systems
(ITS).
The present document is part 1 of a multi-part deliverable covering Conformance test specifications for Transmission of
IP packets over GeoNetworking as identified below:
Part 1: "Test requirements and Protocol Implementation Conformance Statement (PICS) proforma";
Part 2: "Test Suite Structure and Test Purposes (TSS & TP)";
Part 3: "Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)".
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 859-1 V1.2.1 (2014-04)
1 Scope
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for
Conformance test specifications for Geonetworking Basic Transport Protocol as defined in EN 302 636-6-1 [1] in
compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [3].
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 302 636-6-1 (V1.2.0): "Intelligent Transport Systems (ITS); Vehicular Communications;
GeoNetworking; Part 6: Internet Integration; Sub-part 1: Transmission of IPv6 Packets over
GeoNetworking Protocols".
[2] ISO/IEC 9646-1 (1994): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 1: General concepts".
[3] ISO/IEC 9646-7 (1995): "Information technology - Open Systems Interconnection - Conformance
testing methodology and framework - Part 7: Implementation Conformance Statements".
™
[4] IEEE 802.3 -2008: "IEEE Standard for Information Technology - Telecommunications and
information exchange between systems-Local and metropolitan area networks - Specific
requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
Access Method and Physical Layer Specifications".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
Not applicable.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in EN 302 636-6-1 [1], ISO/IEC 9646-1 [2]
and in ISO/IEC 9646-7 [3] apply.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 859-1 V1.2.1 (2014-04)
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
DGVL Dynamic Geographical Virtual Link
ICS Implementation Conformance Statement
IP Internet Protocol
IPv6 Internet Protocol version 6
ITS Intelligent Transportation Systems
IUT Implementation Under Test
LAN Local Area Network
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
SGVL Static Geographical Virtual Link
SUT System Under Test
TVL Topological Virtual Link
4 Conformance requirement concerning PICS
If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be
technically equivalent to the text of the PICS proforma given in annex A, and shall preserve the numbering, naming and
ordering of the proforma items.
An ICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with
the instructions for completion given in clause A.1.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 859-1 V1.2.1 (2014-04)
Annex A (normative):
IPV6overGEONETW PICS Proforma
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the IPV6overGEONETW PICS proforma in this annex so that it
can be used for its intended purposes and may further publish the completed IPV6overGEONETW PICS.
A.1 Guidance for completing the ICS proforma
A.1.1 Purposes and structure
The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined in EN 302 636-6-1 [1] may provide information about the implementation in a standardized
manner.
The PICS proforma is subdivided into clauses for the following categories of information:
• guidance for completing the ICS proforma;
• identification of the implementation;
• identification of the EN 302 636-6-1 [1];
• global statement of conformance;
• PICS proforma tables.
A.1.2 Abbreviations and conventions
The ICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines
presented in ISO/IEC 9646-7 [3].
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
means "is supported by the implementation?".
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 102 859-1 V1.2.1 (2014-04)
Status column
The following notations, defined in ISO/IEC 9646-7 [3], are used for the status column:
m mandatory - the capability is required to be supported.
o optional - the capability may be supported or not.
n/a not applicable - in the given context, it is impossible to use the capability.
x prohibited (excluded) - there is a requirement not to use this capability in the given context.
o.i qualified optional - for mutually exclusive or selectable options from a set. "i" is an integer which
identifies an unique group of related optional items and the logic of their selection which is
defined immediately following the table.
ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on the support of
other optional or conditional items. "i" is an integer identifying an unique conditional status
expression which is defined immediately following the table.
i irrelevant (out-of-scope) - capability outside the scope of the reference specification. No answer is
requested from the supplier.
NOTE 1: This use of "i" status is not to be confused
...