ETSI TS 131 124 V14.6.0 (2018-10)
Universal Mobile Telecommunications System (UMTS); LTE; Mobile Equipment (ME) conformance test specification; Universal Subscriber Identity Module Application Toolkit (USAT) conformance test specification (3GPP TS 31.124 version 14.6.0 Release 14)
Universal Mobile Telecommunications System (UMTS); LTE; Mobile Equipment (ME) conformance test specification; Universal Subscriber Identity Module Application Toolkit (USAT) conformance test specification (3GPP TS 31.124 version 14.6.0 Release 14)
RTS/TSGC-0631124ve60
General Information
Buy Standard
Standards Content (Sample)
ETSI TS 131 124 V14.6.0 (2018-10)
TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
LTE;
Mobile Equipment (ME) conformance test specification;
Universal Subscriber Identity Module
Application Toolkit (USAT) conformance test specification
(3GPP TS 31.124 version 14.6.0 Release 14)
---------------------- Page: 1 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 1 ETSI TS 131 124 V14.6.0 (2018-10)
Reference
RTS/TSGC-0631124ve60
Keywords
LTE,UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2018.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
TM TM
3GPP and LTE are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M logo is protected for the benefit of its Members.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 2 ETSI TS 131 124 V14.6.0 (2018-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 3 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 3 ETSI TS 131 124 V14.6.0 (2018-10)
Contents
Intellectual Property Rights . 2
Foreword . 2
Modal verbs terminology . 2
Foreword . 4
1 Scope . 5
2 References . 6
3 Definitions and abbreviations . 7
4 Requirement . 7
Annex C (informative): Change history . 8
History . 16
ETSI
---------------------- Page: 4 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 4 ETSI TS 131 124 V14.6.0 (2018-10)
Foreword
rd
This Technical Specification has been produced by the 3 Generation Partnership Project (3GPP).
The contents of the present document are subject to continuing work within the TSG and may change following formal
TSG approval. Should the TSG modify the contents of the present document, it will be re-released by the TSG with an
identifying change of release date and an increase in version number as follows:
Version x.y.z
where:
x the first digit:
1 presented to TSG for information;
2 presented to TSG for approval;
3 or greater indicates TSG approved document under change control.
y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections,
updates, etc.
z the third digit is incremented when editorial only changes have been incorporated in the document.
ETSI
---------------------- Page: 5 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 5 ETSI TS 131 124 V14.6.0 (2018-10)
1 Scope
The present document describes the technical characteristics and methods of test for testing the USIM Application
rd
Toolkit implemented in 3 Generation Mobile Equipments (ME) or Mobile Station (MS) for the LTE-Advanced, LTE,
3G and 2G digital cellular communications systems within the 3GPP digital cellular telecommunications system, in
compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [19]
and ETSI ETS 300 406 [20].
The present document is valid for ME implemented according to 3GPP Release 99, or Release 4, or any later Release.
The present document covers the minimum characteristics considered necessary in order to provide sufficient
performance for mobile equipment and to prevent interference to other services or to other users, and to the PLMNs.
It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it
necessarily represent the optimum performance achievable.
The present document is part of the 3GPP-series of technical specifications. The present document neither replaces any
of the other 3GPP technical specifications or 3GPP related ETSs or ENs, nor is it created to provide full understanding
of (or parts of) the UMTS. The present document lists the requirements, and provides the methods of test for testing the
USIM Application Toolkit implemented in a ME for conformance to the 3GPP standard.
For a full description of the system, reference should be made to all the 3GPP technical specifications or 3GPP related
ETSIs, ETSs or ENs. Clause 2 provides a complete list of the 3GPP technical specifications, 3GPP related ETSI's EtSs,
ENs, and ETRs, on which this conformance test specifications is based.
If there is a difference between this present conformance document, and any other 3GPP technical specification or
3GPP related ETSI, ETS, EN, or 3GPP TS, then the other 3GPP technical specification or 3GPP related ETSI ETS, EN
or 3GPP TS shall prevail.
Within the context of this document, the term "terminal" used in ETSI TS 102 384 [26] refers to the Mobile Equipment
(ME).
Within the context of this document, the term "UICC" used in ETSI TS 102 384 [26] refers to the USIM card.
Within the context of this document, the term "NAA" used in ETSI TS 102 384 [26] refers to the USIM application.
For the avoidance of doubt, references to clauses of ETSI TS 102 384 [26] or ETSI TS 102 221 [13] include all the
subclauses of that clause, unless specifically mentioned.
The target test specification ETSI TS 102 384 [26] contains material that is outside of the scope of 3GPP requirements
and the present document indicates which parts are in the scope and which are not.
A 3GPP ME may support functionality that is not required by 3GPP, but the requirements to do so are outside of the
scope of 3GPP. Thus the present document does not contain tests or references to ETSI TS 102 384 [26] tests for
features which are out of scope of 3GPP.
In the present document, unless explicitly stated otherwise, for Rel-13 onwards the term E-UTRAN implicitly refers to
the E-UTRAN in WB-S1 mode. E-UTRAN in NB-S1 mode is always explicitly referred to as NB-IoT.
ETSI
---------------------- Page: 6 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 6 ETSI TS 131 124 V14.6.0 (2018-10)
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including
a GSM document), a non-specific reference implicitly refers to the latest version of that document in the relevant
Release.
• References to 3GPP Technical Specifications and Technical Reports throughout the present document shall be
interpreted according to the Release shown in the formal reference in this clause, based upon the Release of the
implementation under test.
[1] - [12] Void.[13] If the device under test is a
• R99 ME: ETSI TS 102 221 v3.18.0: "UICC-Terminal interface; Physical and
logical characteristics",
• Rel-4 ME: ETSI TS 102 221 v4.16.0: "UICC-Terminal interface; Physical
and logical characteristics",
• Rel-5 ME: ETSI TS 102 221 v5.10.0: "UICC-Terminal interface; Physical
and logical characteristics",
• Rel-6 ME: ETSI TS 102 221 v6.15.0: "UICC-Terminal interface; Physical
and logical characteristics",
• Rel-7 ME: ETSI TS 102 221 v7.17.0: "UICC-Terminal interface; Physical
and logical characteristics",
• Rel-8 ME: ETSI TS 102 221 v8.5.0: "UICC-Terminal interface; Physical and
logical characteristics",
• Rel-9 ME: ETSI TS 102 221 v9.2.0: "UICC-Terminal interface; Physical and
logical characteristics"",
• Rel-10 ME: ETSI TS 102 221 v10.0.0: "UICC-Terminal interface; Physical
and logical characteristics",
• Rel-11 ME: ETSI TS 102 221 v11.1.0: "UICC-Terminal interface; Physical
and logical characteristics",
• Rel-12 ME: ETSI TS 102 221 v12.1.0: "UICC-Terminal interface; Physical
and logical characteristics".
• Rel-13 ME: ETSI TS 102 221 v13.2.0: "UICC-Terminal interface; Physical
and logical characteristics".
• Rel-14 ME: ETSI TS 102 221 v14.1.0: "UICC-Terminal interface; Physical
and logical characteristics".
[14] - [18] Void.[19] ISO/IEC 9646-7 (1995): "Information technology - Open Systems Interconnection -
Conformance testing methodology and framework - Part 7: Implementation Conformance
Statements".
[20] ETSI ETS 300 406 (1995): "Methods for Testing and Specification (MTS); Protocol and profile
conformance testing specifications; Standardization methodology".
[21] - [25] Void.[26] ETSI TS 102 384: "Smart cards; UICC-Terminal interface; Card Application Toolkit
(CAT) conformance specification".
[27] - [38] Void.[39] 3GPP TS 31.124, Rel-15: "Mobile Equipment (ME) conformance test specification;
Universal Subscriber Identity Module Application Toolkit (USAT) conformance test
specification".
ETSI
---------------------- Page: 7 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 7 ETSI TS 131 124 V14.6.0 (2018-10)
3 Definitions and abbreviations
Void.
4 Requirement
The requirements of the present document are provided in 3GPP TS 31.124 [39].
ETSI
---------------------- Page: 8 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 8 ETSI TS 131 124 V14.6.0 (2018-10)
Annex C (informative):
Change history
ETSI
---------------------- Page: 9 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 9 ETSI TS 131 124 V14.6.0 (2018-10)
CP-doc CR REV Meeting SUBJECT CAT NEW_VERS
TP-050016 - - 2.0.0 Approved TP-27, March 2005 6.0.0
CP-050144 0001 - CT-28 Correction of coding in MT Call Event F 6.1.0
CP-050144 0002 - CT-28 Correction of applicability table F 6.1.0
CP-050144 0003 - CT-28 Essential Corrections F 6.1.0
CP-050144 0004 - CT-28 Correction of coding in MT Call Event F 6.1.0
CP-050144 0005 - CT-28 Removal of GET RESPONSE references F 6.1.0
CP-050447 0006 - CT-29 Rel-6: Correction of release dependent EF values F 6.2.0
CP-050447 0007 - CT-29 Correction of applicability and terminal profile support tables F 6.2.0
CP-050447 0008 - CT-29 Correction of EF_BDN coding F 6.2.0
CP-050447 0009 - CT-29 Incorrect Dialling Number string in clause 27.22.4.13.1 SEQ 1.9 for PCS F 6.2.0
1900
CP-050447 0010 - CT-29 Essential corrections in display icons Setup Menu and Select Item f 6.2.0
CP-050447 0011 - CT-29 Incorrect Ti Flag value for SET UP 1.4.1 in clause 27.22.4.16.1 F 6.2.0
CP-050447 0012 - CT-29 Correction of TP-MR (TP Message Reference) of the SMS SUBMIT F 6.2.0
TPDU submitted to the USS (Network)
CP-050447 0013 - CT-29 Corrections in the Logical description and BER encoding in clause F 6.2.0
27.22.6.2 and 27.22.4.11
CP-050447 0014 - CT-29 Incorrect DCS in SMS-CB data download tests F 6.2.0
CP-050447 0015 - CT-29 Essential Corrections in clause 27.22.8 MO SHORT MESSAGE F 6.2.0
CONTROL BY USIM
CP-050447 0016 - CT-29 Introduction of BDN tests for terminals not supporting BDN B 6.2.0
CP-050447 0017 - CT-29 Essential Corrections F 6.2.0
CP-050447 0018 - CT-29 Incorrect SMS-PP 1.4.1 TPDU in clause 27.22.4.22.1 F 6.2.0
CP-050447 0019 - CT-29 Missing interactions in Bearer Independent Protocol test cases F 6.2.0
CP-050447 0020 - CT-29 Correction of Refresh tests F 6.2.0
CP-050447 0022 - CT-29 Applicability of TC 27.22.4.7.1 and TCs related to FDN and BDN F 6.2.0
CP-050447 0023 - CT-29 Essential correction to Terminal Profile table E.1 F 6.2.0
CP-050447 0024 - CT-29 Correction of CB message identifier F 6.2.0
CP-050447 0025 - CT-29 Rel-6: Addition of new UCS2 Tests B 6.2.0
CP-050447 0027 - CT-29 Incorrect Coding of SMS-PP (Data download) Message in clause F 6.2.0
27.22.4.7.1 and 27.22.5.1
- - - - 2005-10: Editorial corrections due to the CRs approved at CP-29 - 6.2.1
CP-050495 0028 - CT-30 Correction of Send SS (UCS2) tests F 6.3.0
CP-050495 0029 - CT-30 Essential Corrections in clause 27.22.4.11 F 6.3.0
CP-050495 0030 - CT-30 Corrections to Select Item (icons support) F 6.3.0
CP-050495 0031 - CT-30 27.22.7.4.1 Location Status Event (normal) F 6.3.0
CP-050495 0032 - CT-30 Essential Corrections of Set Up Menu test F 6.3.0
CP-050495 0033 - CT-30 Correction of applicability table and related addition of missing test F 6.3.0
sequences
CP-050495 0034 - CT-30 Correction in SMS-PP 1.4.1 TPDU of clause 27.22.4.22.1 F 6.3.0
CP-050495 0035 - CT-30 Essential Corrections of SMS-PP download message in Refresh test F 6.3.0
case
CP-050495 0036 - CT-30 Essential Correction in MO SHORT MESSAGE CONTROL BY USIM F 6.3.0
Deletion of sequence 1.9
CP-050495 0037 - CT-30 Deletion of SEQ 1.3 in clause 27.22.4.13.1 F 6.3.0
CP-060013 0041 - CT-31 Deletion of Send Data test sequence F 6.4.0
CP-060013 0042 - CT-31 Essential correction of Provide Local Information (IMEI) test F 6.4.0
CP-060013 0044 - CT-31 Essential Correction in SEQ 1.8 of clause 27.22.8 F 6.4.0
CP-060013 0045 - CT-31 Essential correction on 27.22.7.3.1 Call Disconnected Event F 6.4.0
CP-060013 0050 - CT-31 Essential correction of Channel Data length in clause 27.22.4.30 F 6.4.0
CP-060014 0048 - CT-31 Essential Corrections in clause 27.22.4.11 F 6.4.0
CP-060014 0052 - CT-31 Essential Corrections in clause 27.22.8 MO SHORT MESSAGE F 6.4.0
CONTROL BY SIM
CP-060014 0049 - CT-31 Essential correction in SEQ 1.4 of clause 27.22.4.11.1 SEND SS F 6.4.0
(normal)
CP-060014 0047 - CT-31 Essential corrections of Run AT Command tests F 6.4.0
CP-060014 0053 - CT-31 Essential corrections to SET UP CALL test sequences F 6.4.0
CP-060015 0055 - CT-31 Essential Correction in TERMINAL RESPONSE coding of clause F 6.4.0
27.22.4.31
CP-060015 0056 - CT-31 Essential corrections to Timer Expiration tests F 6.4.0
CP-060015 0054 - CT-31 BER-TLV suppressions F 6.4.0
CP-060157 0059 - CT-31 Add SMS PP Data Download RP-ERROR Test Case B 6.4.0
CP-060022 0043 - CT-31 Essential Correction in SEQ 1.7 of clause 27.22.4.13.1 F 6.4.0
CP-060022 0046 - CT-31 Essential correction of Refresh test F 6.4.0
CP-060022 0051 - CT-31 Essential correction of Channel Data length in Result TLV of clause F 6.4.0
27.22.4.30
CP-060022 0060 - CT-31 CR 31.124 Rel-6: Insertion of missing REFRESH (IMSI changing F 6.4.0
procedure) test cases
CP-060022 0057 - CT-31 Essential corrections of references F 6.4.0
CP-060241 0061 - CT-32 Proposal to the TS 31.124 Split by referencing the relevant USAT Test 6.5.0
procedures to TS 102 384
ETSI
---------------------- Page: 10 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 10 ETSI TS 131 124 V14.6.0 (2018-10)
CP-doc CR REV Meeting SUBJECT CAT NEW_VERS
CP-060241 0062 - CT-32 Essential corrections on test cases 27.22.6.3 and 27.22.6.4 using record 6.5.0
2 in EF FDN
CP-060241 0063 - CT-32 Essential corrections on TC 27.22.6.4 sequence 4.1 6.5.0
CP-060241 0064 - CT-32 Essential corrections on SEND SHORT MESSAGE test cases 6.5.0
CP-060241 0065 - CT-32 Essential correction of text attributes tests 6.5.0
CP-060241 0066 - CT-32 Definition of appropriate QoS in BIP test cases related to GPRS for 3G 6.5.0
CP-060241 0071 - CT-32 Essential correction of Refresh test in 27.22.7.4.2, seq. 2.4 6.5.0
CP-060241 0074 - CT-32 Essential corrections of RUN AT Command tests 6.5.0
CP-060241 0067 - CT-32 Essential correction of tables B.1 and E.1 6.5.0
CP-060242 0068 - CT-32 Essential Correction in REGISTER 1.2B message coding of clause F 6.5.0
27.22.4.11.1 SEND SS (normal)
CP-060242 0069 - CT-32 Essential correction of 27.22.4.13.1 SET UP CALL, seq 1.4 F 6.5.0
CP-060242 0070 - CT-32 Essential correction of second card reader test applicability F 6.5.0
CP-060242 0072 - CT-32 Correction of TON/NPI coding for Call Control Test case F 6.5.0
CP-060242 0073 - CT-32 Essential corrections on 27.22.4.11.1 sequence. 1.2 F 6.5.0
CP-060242 0075 - CT-32 Essential correction of BIP tests F 6.5.0
CP-060389 0082 1 CT-33 Wrong reference inside test requirement of TC 27.22.7.2.2 F 6.6.0
CP-060389 0087 1 CT-33 Essential corrections of applicability table F 6.6.0
CP-060389 0088 1 CT-33 Essential correction of IMEISV coding for Provide Local Information F 6.6.0
CP-060389 0089 1 CT-33 Essential corrections of text attribute tests for Send USSD and Close F 6.6.0
channel
CP-060389 0090 1 CT-33 Proposal to the TS 31.124 Split by referencing the relevant USAT Test F 6.6.0
procedures to TS 102 384
CP-060389 0091 1 CT-33 Correction to the UCS2 coding in Setup Call test F 6.6.0
CP-060389 0092 1 CT-33 Essential correction of RUN AT Command for text attribute tests F 6.6.0
CP-060389 0095 1 CT-33 Correction of RECEIVE DATA tests F 6.6.0
CP-060389 0096 1 CT-33 Correction of terminology for USIM Service Table F 6.6.0
nd
CP-060389 0097 1 CT-33 Correction of 2 alpha identifier usages in SET UP CALL tests F 6.6.0
CP-060389 0098 1 CT-33 Correction of various typographical errors F 6.6.0
CP-060389 0101 1 CT-33 Essential corrections to OPEN CHANNEL text attribute test sequences F 6.6.0
CP-060389 0078 1 CT-33 Correction of ‘Precedence class’ values in Bearer Independent Protocol F 6.6.0
test cases
CP-060389 0076 1 CT-33 Essential corrections on PROVIDE LOCAL INFORMATION test F 6.6.0
sequences
CP-060389 0080 2 CT-33 Essential corrections on test sequences using the TLV data object F 6.6.0
Location Information
CP-060389 0100 2 CT-33 Essential corrections to SET UP CALL (UCS2 Display) test sequences F 6.6.0
CP-060389 0081 3 CT-33 Essential corrections to REFRESH(normal) test sequence F 6.6.0
CP-060389 0102 1 CT-33 Essential corrections to SEND SS display tests concerning F 6.6.0
longForwardedToNumber
CP-060475 0086 1 CT-33 Essential corrections of MMI entries in table E.1 F 6.6.0
CP-060475 0077 2 CT-33 Corrections to SET UP CALL test case 27.22.4.13.1 F 6.6.0
CP-060475 0099 1 CT-33 Essential corrections to SEND SS concerning longForwardedToNumber F 6.6.0
CP-060475 0094 2 CT-33 Corrections to MO SHORT MESSAGE CONTROL BY USIM tests F 6.6.0
CP-060517 0084 1 CT-33 Essential corrections Set Up Call, seq. 1.9 F 6.6.0
CP-060540 0103 - CT-34 Correction of APN Coding in Open Channel test case F 6.7.0
CP-060540 0085 2 CT-34 Essential corrections of BIP entries in table E.1 F 6.7.0
CP-060540 0110 2 CT-34 Essential correction of Result TLV handling F 6.7.0
CP-060540 0111 - CT-34 Essential correction of expected sequence in OPEN CHANNEL test case F 6.7.0
CP-060727 0105 - CT-34 Some of the Applicability table content is missing when printed or in Print F 6.7.0
Layout mode
CP-060727 0106 1 CT-34 Correction to SET UP CALL F 6.7.0
CP-060727 0107 - CT-34 Correction to SEND SS F 6.7.0
CP-060727 0058 1 CT-34 Addition of REFRESH USIM Application Reset B 6.7.0
CP-060727 0108 - CT-34 Essential corrections on SEND SS (UCS2 display) test cases F 6.7.0
CP-060727 0109 - CT-34 Essential corrections on REFRESH TC 27.22.4.7.1 F 6.7.0
CP-060727 0104 1 CT-34 Corrections in the interpretation of Katakana Character F 6.7.0
CP-070063 0115 - CT-35 Essential correction of 27.22.5.2 F 6.8.0
CP-070063 0113 1 CT-35 Essential correction of Terminal Profile Support table F 6.8.0
CP-070063 0112 1 CT-35 Essential correction of 27.22.4.13.1 Expected Sequence 1.7 F 6.8.0
CP-070065 0116 - CT-35 Essential correction of 27.22.4.7, seq. 1.7 F 6.8.0
CP-070065 0119 - CT-35 Essential correction of TC 27.22.7.4.1 F 6.8.0
CP-070065 0120 - CT-35 CR implementation error correction for 27.22.6.2 SEQ 2.2 F 6.8.0
CP-070065 0121 - CT-35 CR implementation error correction for 27.22.4.11.1 SEQ 1.4A F 6.8.0
CP-070065 0117 1 CT-35 Essential clarification of Network Simulator selection F 6.8.0
CP-070065 0122 1 CT-35 Essential correction of 27.22.4.7.2 SEQ 2.2 F 6.8.0
CP-070065 0124 2 CT-35 Addition of new expected sequence to the SMS-PP Data Download test C 6.8.0
case
CP-070065 0125 2 CT-35 Addition of a new expected sequence to the SMS-CB Data Download F 6.8.0
test case
CP-070297 0127 2 CT-36 Essential correction of test case applicability F 6.9.0
CP-070297 0128 - CT-36 Correction of 27.22.4.2 applicability F 6.9.0
ETSI
---------------------- Page: 11 ----------------------
3GPP TS 31.124 version 14.6.0 Release 14 11 ETSI TS 131 124 V14.6.0 (2018-10)
CP-doc CR REV Meeting SUBJECT CAT NEW_VERS
CP-070297 0129 1 CT-36 Essential correction of test case applicability for 27.22.6.1 A 6.9.0
CP-070297 0130 1 CT-36 Essential correction on 27.22.8 A 6.9.0
CP-070297 0131 - CT-36 Essential correction on 27.22.5.1 F 6.9.0
CP-070297 0132 - CT-36 Essential correction on 27.22.4.11.1 sequence. 1.4 B F 6.9.0
CP-070297 0133 - CT-36 Correction of reference to ISO/IEC 7816-3 A 6.9.0
- - - 2007-06 Update to Rel-7 version (MCC) - 7.0.0
CP-070610 0136 1 CT-37 Essential Correction to 27.22.6.2 F 7.1.0
CP-070619 0137 - CT-37 Essential correction of variable timeout test case applicability F 7.1.0
CP-070610 0138 - CT-37 Essential correction to 27.22.4.13.1, seq. 1.9 F 7.1.0
CP-070619 0139 - CT-37 Essential Correction to 27.22.6.1, Seq. 1.1 F 7.1.0
CP-070619 0140 - CT-37 Essential correction of references F 7.1.0
CP-070619 0141 1 CT-37 Essential correction of 27.22.4.13.1, sequence 1.7 F 7.1.0
CP-070619 0142 1 CT-37 Test Cases dependant on Radio Access Clarification F 7.1.0
CP-070619 0143 - CT-37 Essential correction of 27.22.4.7.1, sequence 1.6 F 7.1.0
CP-070843 0145 1 CT-38 Essential correction of 27.22.8, sequence 1.3 in order to remove A 7.2.0
verification of the Alpha Identifier
CP-070843 0154 1 CT-38 Essential correction of 27.22.4.7.1, sequence 1.6 caring of the missing A 7.2.0
requirements in TS 31.111
CP-070843 0146 1 CT-38 Essential correction of 27.22.4.26.2.4.2, seq. 2.2 in order to remove the A 7.2.0
possibility of retrieving a deleted previously visited URL
CP-070843 0155 - CT-38 Correction to add optional support of Call Hold Supplementary Service A 7.2.0
CP-070847 0147 - CT-38 Essential correction terminal profile indication for Local Connection Event F 7.2.0
CP-070847 0149 - CT-38 Essential correction on test case 27.22.4.5.1 F 7.2.0
CP-070847 0150 - CT-38 Definition of test sequence 1.7 in test case 27.22.4.15 F 7.2.0
CP-070847 0151 - CT-38 Definition of test sequence 1.12 and 1.13 in test case 27.22.4.15 F 7.2.0
CP-070847 0152 - CT-38 Essential correction on test case 27.22.4.28.2.1 correcting wrong F 7.2.0
implementation of CR 0078 rev1 in C6-060547
CP-070847 0148 1 CT-38 Introduction of Rel-7 test case applicability F 7.2.0
CP-080172 0156 - CT-39 Essential correction to 27.22.4.15 F 7.3.0
CP-080172 0157 - CT-39 Essential correction of 27.22.8, seq. 1.3 F 7.3.0
CP-080172 0158 1 CT-39 Essential correction regarding terminal capabilities F 7.3.0
CP-080172 0159 - CT-39 Essential correction to network dependency of several tests F 7.3.0
CP-080388 0160 1 CT-40 Essential correction of icon test case applicability F 7.4.0
CP-080388 0161 2 CT-40 Essential correction to 27.22.6.4 F 7.4.0
CP-080388 0163 3 CT-40 Essential correction of test case applicability of 27.22.6.2 and 27.22.4.11 F 7.4.0
CP-080588 0164 - CT-41 Essential correction of TC 27.22.4.12.1 Seq. 1.6 F 7.5.0
CP-080588 0165 - CT-41 Essential correction of test case applicability F 7.5.0
CP-080588 0166 - CT-41 Essential correction of TC 27.22.7.8.1 F 7.5.0
CP-080906 0168 - CT-42 Essential correction of TC 27.22.6.5 seq. 5.1 applicability F 7.6.0
CP-080906 0169 - CT-42 Essential correction of bearer parameters in browser tests F 7.6.0
CP-080948 0170 3 CT-42 Pre-conditions for Launch browser A 7.6.0
CP-080948 0171 - CT-42 Essential correction of 27.22.4.26.2 Seq. 2.2 A 7.6.0
--------------- - - SP-42 Upgrade to Rel-8 - 8.0.0
CP-090194 0173 1 CT-43 Inclusion of Rel-8 test case applicability and Rel-8 feature indication in F 8.1.0
the terminal profile content
CP-090194 0174 - CT-43 Essential correction of tables B.1 and E.1 F 8.1.0
CP-090194 0176 1 CT-43 Essential correction to BIP tests - usage of ME's default channel A 8.1.0
identifier
CP-090459 0175 3 CT-44 Introduction of steering of roaming test cases B 8.2.0
CP-090460 0177 1 CT-44 Test case and test case applicability changes for terminals with reduced F 8.2.0
USAT capabilities
CP-090718 0178 3 CT-45 Essential correction to icon test applicability F 8.3.0
CP-090718 0179 1 CT-45 Update of table E.1 regarding E-UTRAN support indication F 8.3.0
CP-090718 0180 1 CT-45 Essential correction of 27.22.6.1 sequence 1.9 F 8.3.0
CP-090718 0181 - CT-45 Essential correction of 27.22.4.7.3, Seq. 3.2 F 8.3.0
CP-090718 0182 - CT-45 Essential correction of applicability and terminal profile table F 8.3.0
--------------- - - - Correction of inconsistency spotted at implementation - 8.3.1
CP-090999 0186 1 CT-46 Essential correction of 27.22.4.7.3 F 8.4.0
CP-091000 0187 1 CT-46 Update of TS 31.124 for terminals supporting E-UTRAN F 8.4.0
CP-091000 0188 2 CT-46 Introduction of OPEN CHANNEL tests for E-UTRAN F 8.4.0
---------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.