ETSI TS 104 014 V1.1.1 (2024-07)

Emergency Communications (EMTEL); PEMEA File Exchange Extension

DTS/EMTEL-00074

General Information

• Status: Not Published
• Technical Committee: EMTEL - Emergency Communications
• Current Stage: 12 - Citation in the OJ (auto-insert)
• Due Date: 09-Aug-2024
• Completion Date: 25-Jul-2024

Standards Content (Sample)

TECHNICAL SPECIFICATION
Emergency Communications (EMTEL);
PEMEA File Exchange Extension
2 ETSI TS 104 014 V1.1.1 (2024-07)

Reference
DTS/EMTEL-00074
Keywords
application, emergency
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI TS 104 014 V1.1.1 (2024-07)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Executive summary . 5
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 8
3.3 Abbreviations . 8
4 PEMEA capability extensions . 9
4.1 Overview of extension in PEMEA . 9
4.2 Service support indication and response . 9
4.2.1 Service definition . 9
4.2.2 Service support indication . 9
4.2.3 Service support response . 10
5 Architecture . 10
5.1 Overview . 10
5.2 Architecture and high-level flows . 10
6 Security. 12
6.1 Transport security . 12
6.2 Security token usage . 12
7 Procedures and signalling . 12
7.1 Overview . 12
7.2 Service invocation . 13
7.2.1 Service invocation procedures . 13
7.2.2 Service invocation object . 14
7.2.3 File Exchange session creation and deletion . 14
7.3 File Exchange operations . 14
7.3.1 Overview . 14
7.3.2 List files . 14
7.3.2.1 Description . 14
7.3.2.2 Example . 16
7.3.3 Upload file . 16
7.3.3.1 Description . 16
7.3.3.2 Example . 18
7.3.4 Download file . 18
7.3.4.1 Description . 18
7.3.4.2 Example . 19
7.4 Notifications channel . 20
7.4.1 Overview . 20
7.4.2 Subscribe to the File Exchange session . 20
7.4.2.1 Description . 20
7.4.2.2 Example . 21
7.4.3 Receive notification events . 22
7.4.3.1 Overview . 22
7.4.3.2 File uploaded to the File Exchange session . 22
7.4.3.2.1 Description . 22
ETSI
4 ETSI TS 104 014 V1.1.1 (2024-07)
7.4.3.2.2 Example . 23
7.4.3.3 File Exchange session closed by the File Exchange Server . 23
7.4.3.3.1 Description . 23
7.4.3.3.2 Example . 23
7.4.4 Unsubscribe from the File Exchange session . 23
7.5 Errors . 24
7.5.1 Description . 24
7.5.2 Example . 24
8 Add participants to the File Exchange session . 24
9 File Exchange session closure . 24
10 PEMEA File Exchange type definitions . 25
10.1 Overview . 25
10.2 Data types . 25
10.2.1 FileMetadata . 25
10.2.2 EventType . 25
10.2.3 Error . 25
10.3 File uploaded event . 26
10.4 File Exchange session closed event . 26
Annex A (normative): PEMEA File Exchange JSON schema . 27
A.1 General .
...