ETSI ETS 300 087 ed.1 (1994-05)

Integrated Services Digital Network (ISDN); Facsimile group 4 class 1 equipment on the ISDN; Functional specification of the equipment

T/TE 05-09

Digitalno omrežje z integriranimi storitvami (ISDN) – Faksimilna skupina 4, razred 1, za ISDN – Funkcijska specifikacija za opremo

General Information

• Status: Published
• Publication Date: 28-Apr-1994
• Technical Committee: TE 2 - Telematics: Facsimile, Document Handling and Transfer
• Current Stage: 12 - Completion
• Due Date: 09-May-1994
• Completion Date: 29-Apr-1994
• Ref Project: SIST ETS 300 087 E1:2003 - Integrated Services Digital Network (ISDN); Facsimile group 4 class 1 equipment on the ISDN; Functional specification of the equipment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 087 E1:2003
01-december-2003
Digitalno omrežje z integriranimi storitvami (ISDN) – Faksimilna skupina 4, razred
1, za ISDN – Funkcijska specifikacija za opremo
Integrated Services Digital Network (ISDN); Facsimile group 4 class 1 equipment on the
ISDN; Functional specification of the equipment
Ta slovenski standard je istoveten z: ETS 300 087 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 087 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 087 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 087 E1:2003
EUROPEAN ETS 300 087
TELECOMMUNICATION May 1994
STANDARD
Source:ETSI TC-TE Reference: T/TE 05-09
ICS: 33.080
Key words: ISDN, facsimile, group 4
Integrated Services Digital Network (ISDN)
Facsimile group 4 class 1 on the ISDN;
Functional specification of the equipment
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1994. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 087 E1:2003
Page 2
ETS 300 087: May 1994
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 087 E1:2003
Page 3
ETS 300 087: May 1994
Contents
Foreword .5
1 Scope .7
1.1 Field of application.7
2 Normative references.8
3 Abbreviations.8
4 General requirements .9
5 Group 4 class 1 facsimile equipment general characteristics.9
5.1 Basic characteristics .9
5.2 Basic functions.9
5.2.1 Resolution .9
5.3 Scanning.9
5.4 Printer or display .9
5.5 Terminal identification.9
5.6 Call Identification Line (CIL).10
5.7 Default conditions .10
6 Reproducible area.10
6.1 Scanning track .10
6.2 Presentation.10
7 Maximum receiving time .10
8 Optional group 3 aspects .10
9 Use and management of the group 4 class 1 facsimile equipment .10
10 Extended features .11
Annex A (informative): Bibliography.12
History.13

---------------------- Page: 5 ----------------------

SIST ETS 300 087 E1:2003
Page 4
ETS 300 087: May 1994
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 087 E1:2003
Page 5
ETS 300 087: May 1994
Foreword
This European Telecommunication Standard (ETS) has been produced by the Terminal Equipment
Technical Committee of the European Telecommunications Standards Institute (ETSI).
Although based on CCITT Recommendations T.563 [1] and T.6 [2], this ETS is also related to other ETSI
standards covering group 4 class 1 facsimile. These are ETSs 300 080 [3], 300 112 [4], 300 155 and
300 280.
Details of the full titles and dates of the above-mentioned Recommendations and ETSs are given in
Clauses 1 and 2 of this ETS.
Annex A to this ETS is informative.
Transposition dates
Date of latest announcement of this ETS (doa): 9th May 1994
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 9th August 1994
Date of withdrawal of any conflicting National Standard (dow): 9th February 1995

---------------------- Page: 7 ----------------------

SIST ETS 300 087 E1:2003
Page 6
ETS 300 087: May 1994
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 087 E1:2003
Page 7
ETS 300 087: May 1994
1 Scope
This ETS specifies the technical characteristics of equipment offering group 4 class 1 facsimile functions
for attachment to the Integrated Services Digital Network (ISDN). It is based upon
CCITT Recommendation T.563 [1], and CCITT Recommendation T.6 [2].
A basic level of compatibility is provided between any two terminals, both nationally and internationally, so
that they may communicate image-coded information to each other. This is to be achieved by requiring
that terminals comply with ETSs 300 080 [3], 300 112 [4] and this ETS.
When there is a facsimile group 4 service, only facsimile equipment conforming to this specification may
participate in the service. Facsimile equipment complying only to NET 3 can be connected to the ISDN,
but may not participate in the service.
It is also permitted to connect group 4 class 1 facsimile equipment to the Telefax 4 Service via primary
rate access (according to ETS 300 156). In this case, compliance with the B-channel requirements of
ETS 300 080 [3] only (B-channel) is needed for group 4 class 1 facsimile equipment.
This ETS is related to 4 other ETSs on group 4 class 1 facsimile:
ETS 300 080 [3] "Integrated Services Digital Network (ISDN); ISDN lower layer protocols for
telematic terminals".
ETS 300 112 [4] "Integrated Services Digital Network (ISDN); Facsimile group 4 class 1
equipment on the ISDN; End-to-end protocols".
prETS 300 155 "Facsimile group 4 class 1 equipment on the ISDN; End-to-end protocols tests
(interconnection capability testing)".
ETS 300 280 "Integrated Services Digital Network (ISDN); Facsimile group 4 class 1
equipment on the ISDN, Terminal testing".
1.1 Field of application
This ETS covers group 4 class 1 facsimile equipment functionality only, as defined in
CCITT Recommendations T.563 [1] and T.6 [2] with the following restrictions:
a) only black and white image types are considered, i.e. foreground and background or set and unset
pels according to CCITT Recommendation T.417 [5];
b) only equipment connected to an ISDN in a circuit switched mode, at both basic and primary rate,
are considered (ISDN packet switched mode, Public Switched Telephone Network (PSTN), Circuit
Switched Public Data Networks (CSPDNs), and Packet Switched Public Data Networks (PSPDNs)
are not considered);
c) only the Transport layer procedure defined in CCITT Recommendation T.70 [6], Section 5, is
considered;
d) only the Session control procedures defined in CCITT Recommendation T.62 [7] or
CCITT Recommendation T.62bis [8] are considered;
e) only documents defined as Class B of the Formatted Document Architecture (FDA) of
CCITT Recommendation T.412 [9] are considered, i.e. facsimile documents;
f) Class A of Formatted Document Architecture (FDA) and basic Teletex documents are not
considered;
g) only centre line page referencing is considered, i.e. number of pels per line divided by 2 (any further
studies on this point may be reflected in a later edition of this ETS).

---------------------- Page: 9 ----------------------

SIST ETS 300 087 E1:2003
Page 8
ETS 300 087: May 1994
2 Normative references
This ETS incorporates by dated or undated reference, provisions from other publications
...