ETSI TS 102 843 V1.1.1 (2014-01)

Digital Enhanced Cordless Telecommunications (DECT); New Generation DECT; Additional feature set nr.1 for extended wideband speech services; Profile Test Specification (PTS) and Test Case Library (TCL)

DTS/DECT-NG0264

General Information

• Status: Published
• Publication Date: 14-Jan-2014
• Technical Committee: DECT NewGen - DECT NewGeneration
• Current Stage: 12 - Completion
• Due Date: 20-Jan-2014
• Completion Date: 15-Jan-2014

Standards Content (Sample)

Technical Specification
Digital Enhanced Cordless Telecommunications (DECT);
New Generation DECT;
Additional feature set nr.1
for extended wideband speech services;
Profile Test Specification (PTS) and Test Case Library (TCL)

2 ETSI TS 102 843 V1.1.1 (2014-01)

Reference
DTS/DECT-NG0264
Keywords
DECT, codec, GAP, IMT-2000, interoperability,
IP, profile, speech, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI TS 102 843 V1.1.1 (2014-01)
Contents
Intellectual Property Rights . 7
Foreword . 7
1 Scope . 8
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 9
3 Definitions, symbols and abbreviations . 11
3.1 Definitions . 11
3.2 Symbols . 11
3.3 Abbreviations . 12
4 Test method . 13
4.1 Test platform . 13
4.1.1 PP test platform . 13
4.1.1.1 List content for tests . 13
4.1.1.1.1 List of Supported Lists . 13
4.1.1.1.2 Missed Calls List . 13
4.1.1.1.3 Outgoing Calls List . 13
4.1.1.1.4 Incoming Accepted Calls List . 13
4.1.1.1.5 All Calls List . 13
4.1.1.1.6 Contact List . 14
4.1.1.1.7 Internal Names List . 16
4.1.1.1.8 DECT System Settings List . 16
4.1.1.1.9 Line Settings List . 16
4.1.1.1.10 All Incoming Calls List . 16
4.1.1.2 List Content for SMS Tests . 16
4.1.1.2.1 Incoming SMS List. 16
4.1.1.2.2 Sent SMS List . 17
4.1.1.2.3 Outgoing SMS List . 17
4.1.1.2.4 Draft SMS List . 17
4.1.1.2.5 SMS Settings List . 18
4.1.1.3 List Content for DTAM and Call Screening Tests . 18
4.1.1.3.1 DTAM Settings List . 18
4.1.1.3.2 DTAM Incoming Messages List . 18
4.1.1.3.3 DTAM Welcome Messages List . 19
4.1.2 FP test platform . 19
4.1.3 NG DECT Part 1 backward compatibility test platform . 19
4.2 Hypothesis . 20
4.3 Test groups . 20
4.3.1 Network features . 20
4.3.2 Application features . 20
5 Test Cases (TCs) . 20
5.1 TC definition conventions . 20
5.1.1 Test equipment implementation requirements . 21
5.2 TC naming conventions . 23
5.3 Portable Part TC purposes . 23
5.3.1 List of New Generation DECT Part 1 PT tests cases . 23
5.3.2 List of New Generation DECT Part 3 PT tests cases . 24
5.3.3 List of New Generation DECT Part 5 PT tests cases . 32
5.4 Fixed Part TC purposes . 35
5.4.1 List of New Generation DECT Part 1 FT tests cases . 35
5.4.2 List of New Generation DECT Part 3 FT tests cases . 35
5.4.3 List of New Generation DECT Part 5 FT tests cases . 44
6 Portable Part Test specification . 46
ETSI
4 ETSI TS 102 843 V1.1.1 (2014-01)
6.1 TC_PT_NG1.N.1 Codec negotiation tests cases . 47
6.2 TC_PT_NG1.N.2 Codec switching tests cases. 47
6.3 TC_PT_NG1.N.3 Missed call notification tests cases . 48
6.4 TC_PT_NG1.N.4 Voice message waiting notification tests cases . 48
6.5 TC_PT_NG1.N.5 Date and time synchronization tests cases . 48
6.6 TC_PT_NG1.N.6 Parallel calls tests cases . 49
6.7 TC_PT_NG1.N.7 Common parallel call procedures tests cases . 49
6.8 TC_PT_NG1.N.8 Call transfer tests cases . 52
6.9 TC_PT_NG1.N.9 3-party conference with established external and/or internal calls tests cases . 52
6.10 TC_PT_NG1.N.10 Intrusion call tests cases . 52
6.11 TC_PT_NG1.N.11 Call deflection (external or internal) tests cases . 52
6.12 TC_PT_NG1.N.12 Line identification tests cases . 52
6.13 TC_PT_NG1.N.13 Call identification tests cases . 52
6.14 TC_PT_NG1.N.14 Multiple lines tests cases . 52
6.15 TC_PT_NG1.N.15 Multiple calls tests cases . 52
6.16 TC_PT_NG1.N.16 List access service tests cases . 52
6.17 TC_PT_NG1.N.17 Calling line identity restriction tests cases . 107
6.18 TC_PT_NG1.N.18 Call forwarding (external calls) tests cases . 107
6.19 TC_PT_NG1.N.19 DTMF handling tests cases . 107
6.20 TC_PT_NG1.N.20 Tones provision tests cases . 107
6.21 TC_PT_NG1.N.21 Headset management tests cases . 107
6.22 TC_PT_NG1.N.22 Handling of lines where second calls are signalled in-band tests cases . 107
6.23 TC_PT_GAP.N.30 Calling Line Identification Presentation tests cases . 107
6.24 TC_PT_GAP.N.31 Internal call tests cases . 107
6.25 TC_PT_GAP.N.34 Calling Name Identification Presentation tests cases . 108
6.26 TC_PT_GAP.N.35 Enhanced security tests cases . 108
6.27 TC_PT_NG1.A.1 Easy PIN code registration tests cases . 109
6.28 TC_PT_NG1.A.2 Easy pairing registration tests cases . 109
6.29 TC_PT_NG1.A.3 Handset locator tests cases . 110
6.30 Void . 110
6.31 Void . 110
6.32 Void . 110
6.33 Void . 110
6.34 Void . 110
6.35 Void . 110
6.36 Void . 110
6.37 Void . 111
6.38 Void . 111
6.39 Void . 111
6.40 TC_PT_GAP.N.1 Outgoing call . 111
6.41 TC_PT_GAP.N.8 Incoming call . 115
6.42 TC_PT_NG1.N.23 Line and Diagnostic Test Cases . 115
6.43 TC_PT_NG1.N.24 Short Messaging Services (SMS) Test Cases . 126
6.44 TC_PT_NG1.N.25 Digital Telephone Answering Machine (DTAM) Test Cases . 132
6.45 TC_PT_NG1.N.26 DTAM Screening Test Cases . 142
6.46 TC_PT_NG1.A.4 Base manual transmit power control Test Cases . 145
6.47 TC_PT_NG1.A.5 Handset adaptive transmit power control Test Cases . 146
7 Fixed Part Test specification . 147
7.1 TC_FT_NG1.N.1 Codec negotiation tests cases . 147
7.2 TC_FT_NG1.N.2 Codec switching tests cases. 147
7.3 TC_FT_NG1.N.3 Missed call notification tests cases . 147
7.4 TC_FT_NG1.N.4 Voice message waiting notification tests cases . 147
7.5 TC_FT_NG1.N.5 Date and time synchronization tests cases . 147
7.6 TC_FT_NG1.N.6 Parallel calls tests cases . 149
7.7 TC_FT_NG1.N.7 Common parallel call procedures tests cases . 149
7.8 TC_FT_NG1.N.8 Call transfer tests cases . 149
7.9 TC_FT_NG1.N.9 3-party conference with established external and/or internal calls tests cases . 152
7.10 TC_FT_NG1.N.10 Intrusion call tests cases . 153
7.11 TC_FT_NG1.N.11 Call deflection (external or internal) tests cases . 153
7.12 TC_FT_NG1.N.12 Line identification tests cases . 153
7.13 TC_FT_NG1.N.13 Call identification tests cases . 153
ETSI
5 ETSI TS 102 843 V1.1.1 (2014-01)
7.14 TC_FT_NG1.N.14 Multiple lines tests cases . 153
7.15 TC_FT_NG1.N.15 Multiple calls tests cases . 153
7.16 TC_FT_NG1.N.16 List access service tests cases . 153
7.17 TC_FT_NG1.N.17 Calling line identity restriction tests cases . 187
7.18 TC_FT_NG1.N.18 Call forwarding (external calls) tests cases . 187
7.19 TC_FT_NG1.N.19 DTMF handling tests cases . 187
7.20 TC_FT_NG1.N.20 Tones provision tests cases . 187
7.21 TC_FT_NG1.N.21 Headset management tests cases . 187
7.22 TC_FT_NG1.N.22 Handling of lines where second calls are signalled in-band tests cases . 187
7.23 TC_FT_GAP.N.30 Calling Line Identification Presentation tests cases . 187
7.24 TC_FT_GAP.N.31 Internal call tests cases . 187
7.25 TC_FT_GAP.N.34 Calling Name Identification Presentation tests cases . 187
7.26 TC_FT_GAP.N.35 Enhanced security tests cases . 188
7.27 TC_FT_NG1.A.1 Easy PIN code registration tests cases . 190
7.28 TC_FT_NG1.A.2 Easy pairing registration tests cases . 190
7.29 TC_FT_NG1.A.3 Handset locator tests cases . 190
7.30 Void . 191
7.31 Void . 191
7.32 Void . 191
7.33 Void . 191
7.34 Void . 191
7.35 Void . 191
7.36 Void . 191
7.37 Void . 191
7.38 Void . 192
7.39 Void . 192
7.40 TC_FT_GAP.N.1 Outgoing call . 192
7.41 TC_FT_GAP.N.8 Incoming call . 194
7.42 TC_FT_NG1.N.23 Line and Diagnostic Test Cases . 196
7.43 TC_FT_NG1.N.24 Short Messaging Services (SMS) Test Cases . 206
7.44 TC_FT_NG1.N.25 Digital Telephone Answering Machine (DTAM) Test Cases . 242
7.45 TC_FT_NG1.N.26 DTAM Screening Test Cases . 253
7.46 TC_FT_NG1.A.4 Base manual transmit power control Test Cases . 259
7.47 TC_FT_NG1.A.5 Handset adaptive transmit power control Test Cases . 260
Annex A (normative): Declarations on features and procedures supported . 261
A.1 Declarations for portable part . 261
A.1.1 Optional or conditional PT features. 261
A.1.2 Extra information for PT testing . 262
A.1.3 Optional or conditional PT procedures . 264
A.1.4 PT relevant test cases list . 267
A.1.4.1 PT is a normal PT (not a headset portable part) . 267
A.1.4.2 PT is a headset portable part . 267
A.2 Declarations for fixed part . 268
A.2.1 Optional and conditional FT features . 268
A.2.2 Extra information for FT testing . 269
A.2.3 Optional or conditional FT procedures . 271
A.2.4 FT relevant test cases list . 271
A.2.4.1 FT handling only 'Common parallel call procedures' lines . 271
A.2.4.2 FT handling only 'double call with in-band signalling' lines . 271
A.2.4.3 FT handling 'Common parallel call procedures' lines and 'double call with in-band signalling' lines . 271
Annex B (informative): List of NG DECT Part 5 procedures . 272
Annex C (normative): Configuration for testing . 274
C.1 Portable part configuration to be declared by supplier . 274
C.2 Fixed part internal configuration to be declared by supplier . 274
C.3 Test environment configuration to be declared by test house or supplier . 274
ETSI
6 ETSI TS 102 843 V1.1.1 (2014-01)
Annex D (normative): Amendments to other DECT specifications . 275
D.1 Amendments to the Technical Basis for Regulation TBR 022 amended by TBR 022/A1
applicable to equipment compliant with TS 102 527-5 . 275
D.1.1 Additional testing requirements for PP side . 275
D.1.2 Additional testing requirements for FP side . 275
D.1.3 Additional Test Cases applicable to equipment compliant with TS 102 527-5 [15] . 275
Annex E (informative): Test case status modifications from TS 102 841 . 276
E.1 PT test cases . 276
E.1.1 Modified statuses for DECT Part 1 PT features and tests cases . 276
E.1.2 Modified statuses for DECT Part 3 PT features and tests cases . 276
E.2 FT test cases . 277
E.2.1 Modified statuses for DECT Part 1 FT features and tests cases . 277
E.2.2 Modified statuses for DECT Part 3 FT features and tests cases . 277
History . 278

ETSI
7 ETSI TS 102 843 V1.1.1 (2014-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Digital Enhanced Cordless
Telecommunications (DECT).
The present document is based on EN 300 175 parts 1 [1] to 8 [8], EN 300 444 [12], TS 102 527-1 [13],
TS 102 527-3 [14] and TS 102 527-5 [15]. General attachment requirements and speech attachment requirements are
based on EN 300 176-1 [9], EN 301 406 [11] (replacing TBR 006 [i.2]) and EN 300 176-2 [10] (previously covered by
TBR 010 [i.3]). Further details of the DECT system may be found in TR 101 178 [i.1].
The information in the present document is believed to be correct at the time of publication. However, DECT
standardization is a rapidly changing area, and it is possible that some of the information contained in the present
document may become outdated or incomplete within relatively short time-scales.
ETSI
8 ETSI TS 102 843 V1.1.1 (2014-01)
1 Scope
The present document contains the Profile Test Specification (PTS) and the Test Case Library (TCL) for "New
Generation DECT; Part 5: Additional feature set nr. 1 for extended wideband speech" (TS 102 527-5 [15]). The present
document covers both the Portable (PT) and the Fixed (FT) Radio terminations.
The present document is defined as an extension of TS 102 841 [16], so the numbering and order of figures and tables
in the present document is aligned with the corresponding numbering and order of figures and tables in
TS 102 841 [16].This also applies to the numbering of tables in the annexes (and especially in annex A).
The Test Case Library (TCL) covers also some test cases for "DECT New Generation; part 1; Wideband speech"
(TS 102 527-1 [13]), "DECT New Generation; part 3; Extended wideband speech" (TS 102 527-3 [14]) and for the
"Generic Access Profile" (EN 300 444 [12]). This is done because such test cases are mandatory or especially relevant
for New Generation DECT part 5 (see TS 102 527-5 [15]), and are not covered by existing GAP test specifications.
Due to the ascending compatibility of DECT profiles, all New Generation DECT part 5 devices (see
TS 102 527-5 [15]), are required to be also compliant with "DECT New Generation; part 3; Extended wideband speech"
(see TS 102 527-3 [14]), "DECT New Generation; part 1; Wideband speech" (TS 102 527-1 [13]) and with the "Generic
Access Profile" (GAP, EN 300 444 [12]). Annex E of the present document specifies the modifications to GAP test
cases for requirements and tests that are optional in GAP test specifications (see note), but that become mandatory to
support the corresponding GAP features in New Generation DECT Part 5.
NOTE: The industry de-facto standard practice for ensuring the compliance to GAP [12] is the use of
TBR 022 [i.4] amended by TBR 022/A1 [i.5], even although these two documents no longer have their
initial regulatory significance. TBR 022 [i.4] relies on the GAP Profile Test Specification
(EN 300 494 parts 1 [i.6] to 3 [i.8]) and on the DECT Test Case Library (EN 300 497 parts 1 [i.9]
to 9 [i.17]). The GAP test suite also includes the GAP Profile Implementation Conformance Statement
(PICS) (EN 300 474 parts 1 [i.25] and 2 [i.26]) and the DECT Common Interface (CI) Profile
Implementation Conformance Statement (PICS) (EN 300 476 parts 1 [i.18] to 7 [i.24]).
The objective of the present document is to provide a basis for approval tests of NG DECT Part 5 equipment giving a
high probability of air interface inter-operability between different manufacturer's DECT equipment.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 1: Overview".
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) layer".
ETSI
9 ETSI TS 102 843 V1.1.1 (2014-01)
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) layer".
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security features".
[8] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 8: Speech and audio coding and transmission".
[9] ETSI EN 300 176-1: "Digital Enhanced Cordless Telecommunications (DECT); Test
specification; Part 1: Radio".
[10] ETSI EN 300 176-2: "Digital Enhanced Cordless Telecommunications (DECT); Test
specification; Part 2: Audio and speech".
[11] ETSI EN 301 406: "Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for
Digital Enhanced Cordless Telecommunications (DECT) covering the essential requirements
under article 3.2 of the R&TTE Directive; Generic radio".
[12] ETSI EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP)".
[13] ETSI TS 102 527-1: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 1: Wideband Speech".
[14] ETSI TS 102 527-3: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 3: Extended wideband speech services".
[15] ETSI TS 102 527-5: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Part 5: Additional feature set nr. 1 for extended wideband speech services".
[16] ETSI TS 102 841: "Digital Enhanced Cordless Telecommunications (DECT); New Generation
DECT; Extended wideband speech services; Profile Test Specification (PTS) and Test Case
Library (TCL)".
[17] ETSI TS 123 038 (V11.0.0) (2012-10):"Digital cellular telecommunications system
(Phase 2+);Universal Mobile Telecommunications System (UMTS); LTE;Alphabets and
language-specific information (3GPP TS 23.038 version 11.0.0 Release 11)".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 101 178: "Digital Enhanced Cordless Telecommunications (DECT); A high Level Guide
to the DECT Standardization".
[i.2] ETSI TBR 006: "Digital Enhanced Cordless Telecommunications (DECT); General terminal
attachment requirements".
[i.3] ETSI TBR 010: "Digital Enhanced Cordless Telecommunications (DECT); General terminal
attachment requirements: Telephony applications".
[i.4] ETSI TBR 022: "Radio Equipment and Systems (RES); Attachment requirements for terminal
equipment for Digital Enhanced Cordless Telecommunications (DECT) Generic Access Profile
(GAP) applications".
ETSI
10 ETSI TS 102 843 V1.1.1 (2014-01)
[i.5] ETSI TBR 022/A1: Amendment to: "Radio Equipment and Systems (RES); Attachment
requirements for terminal equipment for Digital Enhanced Cordless Telecommunications (DECT)
Generic Access Profile (GAP) applications".
[i.6] ETSI EN 300 494-1: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 1: Summary".
[i.7] ETSI EN 300 494-2: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS)
- Portable radio Termination (PT)".
[i.8] ETSI EN 300 494-3: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS)
- Fixed radio Termination (FT)".
[i.9] ETSI EN 300 497-1: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Test Case Library (TCL); Part 1: Test Suite Structure (TSS) and Test Purposes (TP) for
Medium Access Control (MAC) layer".
[i.10] ETSI EN 300 497-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 2: Abstract Test Suite (ATS) for Medium Access
Control (MAC) layer - Portable radio Termination (PT)".
[i.11] ETSI EN 300 497-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 3: Abstract Test Suite (ATS) for Medium Access
Control (MAC) layer - Fixed radio Termination (FT)".
[i.12] ETSI EN 300 497-4: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Test Case Library (TCL); Part 4: Test Suite Structure (TSS) and Test Purposes (TP) - Data
Link Control (DLC) layer".
[i.13] ETSI EN 300 497-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 5: Abstract Test Suite (ATS) - Data Link Control
(DLC) layer".
[i.14] ETSI EN 300 497-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 6: Test Suite Structure (TSS) and Test Purposes (TP)
- Network (NWK) layer - Portable radio Termination (PT)".
[i.15] ETSI EN 300 497-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 7: Abstract Test Suite (ATS) for Network (NWK)
layer - Portable radio Termination (PT)".
[i.16] ETSI EN 300 497-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Test Case Library (TCL); Part 8: Test Suite Structure (TSS) and Test Purposes (TP)
- Network (NWK) layer - Fixed radio Termination (FT)".
[i.17] ETSI EN 300 497-9: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI);Test Case Library (TCL); Part 9: Abstract Test Suite (ATS) for Network (NWK)
layer - Fixed radio Termination (FT)".
[i.18] ETSI EN 300 476-1: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 1: Network (NWK)
layer - Portable radio Termination (PT)".
[i.19] ETSI EN 300 476-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 2: Data
Link Control (DLC) layer - Portable radio Termination (PT)".
[i.20] ETSI EN 300 476-3: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Medium Access
Control (MAC) layer - Portable radio Termination (PT)".
ETSI
11 ETSI TS 102 843 V1.1.1 (2014-01)
[i.21] ETSI EN 300 476-4: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 4: Network (NWK)
layer - Fixed radio Termination (FT)".
[i.22] ETSI EN 300 476-5: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 5: Data Link
Control (DLC) layer - Fixed radio Termination (FT)".
[i.23] ETSI EN 300 476-6: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 6: Medium Access
Control (MAC) layer - Fixed radio Termination (FT)".
[i.24] ETSI EN 300 476-7: "Digital Enhanced Cordless Telecommunications (DECT);Common Interface
(CI); Protocol Implementation Conformance Statement (PICS) proforma; Part 7: Physical layer".
[i.25] ETSI EN 300 474-1: "Digital Enhanced Cordless Telecommunications (DECT);Generic Access
Profile (GAP); Profile requirement list and profile specific Implementation Conformance
Statement (ICS) proforma; Part 1: Portable radio Termination (PT)".
[i.26] ETSI EN 300 474-2: "Digital Enhanced Cordless Telecommunications (DECT);Generic Access
Profile (GAP); Profile requirement list and profile specific Implementation Conformance
Statement (ICS) proforma; Part 2: Fixed radio Termination (FT)".
[i.27] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in TS 102 527-5 [15], TS 102 527-3 [14],
TS 102 527-1 [13], EN 300 444 [12] and the following apply:
GAP (PP, FP, device or equipment): PP, FP or any of them compliant with EN 300 444 [12]
Golden device: ideal example of a device used as reference device for compliance testing and against which later
devices are tested and judged
NG DECT Part 1 Golden Device: golden device, such as the one administered by the DECT Forum, used for
compliance testing of NG DECT Part 1 [13] equipment
NG DECT Part 1 (PP, FP, device o
...