ETSI TS 103 666-2 V15.0.0 (2019-11)

Smart Secure Platform (SSP); Part 2: Integrated SSP (iSSP) characteristics (Release 15)

DTS/SCP-00TSSPvf00-2

General Information

• Status: Published
• Publication Date: 06-Nov-2019
• Technical Committee: SET - Secure Element Technologies
• Current Stage: 12 - Completion
• Due Date: 31-Oct-2019
• Completion Date: 07-Nov-2019

Standards Content (Sample)

ETSI TS 103 666-2 V15.0.0 (2019-11)






TECHNICAL SPECIFICATION
Smart Secure Platform (SSP);
Part 2: Integrated SSP (iSSP) characteristics
(Release 15)



---------------------- Page: 1 ----------------------
Release 15 2 ETSI TS 103 666-2 V15.0.0 (2019-11)



Reference
DTS/SCP-00TSSPvf00-2
Keywords
M2M, MFF

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
Release 15 3 ETSI TS 103 666-2 V15.0.0 (2019-11)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 11
3.1 Terms . 11
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Introduction . 13
4.1 Document Layout . 13
4.2 ASN.1 syntax . 13
4.2.1 Introduction. 13
4.2.2 Start of ASN.1 . 13
5 Overview . 13
5.1 Description . 13
5.2 Security requirements . 14
5.3 References to GlobalPlatform . 14
6 iSSP Architecture . 14
6.1 Overview . 14
6.2 Functional architecture . 15
6.3 Security perimeters . 15
6.4 Unprivileged execution model . 15
6.5 Unprivileged virtual address space . 15
6.6 Run time model . 15
7 Primary Platform . 16
7.1 Hardware Platform . 16
7.1.1 Architecture . 16
7.1.2 Form factor . 16
7.1.3 Security functions . 16
7.1.3.1 Hardware Platform isolation . 16
7.1.3.2 Memory Management Function . 16
7.1.3.3 Key protection function . 16
7.1.3.4 Data protection hardware function . 16
7.1.3.5 Memory transfer function . 17
7.1.3.6 Test functions . 17
7.1.3.7 Remote audit . 17
7.1.3.8 Security sensor function . 17
7.1.4 Memories . 17
7.1.4.1 Non Volatile Memories . 17
7.1.4.2 Volatile memory . 17
7.1.5 Communication functions . 17
7.1.6 Power . 17
7.1.7 Cryptographic functions . 17
7.1.8 Clock . 18
7.1.9 SSP internal interconnect . 18
7.1.10 Secure CPU . 18
7.1.11 Random Number Generator . 18
7.2 Low-level Operating System . 18
7.2.1 Introduction. 18
ETSI

---------------------- Page: 3 ----------------------
Release 15 4 ETSI TS 103 666-2 V15.0.0 (2019-11)
7.2.2 Kernel objects . 18
7.2.3 Global requirements and mandatory Access Control rules . 18
7.2.4 Process states diagram . 18
7.2.5 Definition of the process states . 18
7.2.6 Mandatory access control . 18
7.3 Services . 19
7.3.1 Secondary Platform Bundle Loader . 19
7.3.1.1 Overview . 19
7.3.1.2 Registries . 19
7.3.1.3 Commands . 20
7.3.1.4 Responses . 20
7.3.2 Communication service . 20
7.3.3 Management service . 20
7.4 Minimum level of interoperability . 20
7.5 Primary Platform identification . 21
7.6 Provisioning of Primary Platform software . 21
8 Primary Platform Interface . 21
8.1 Kernel functions ABI/API . 21
8.2 Communication service interface . 21
8.3 Secondary Platform Bundle management service interface . 21
9 Secondary Platform Bundle . 21
9.1 Introduction . 21
9.2 States . 21
9.3 Secondary Platform Bundle container format . 22
9.4 Secondary Platform . 22
9.4.1 High-level OS . 22
9.4.2 Execution framework . 22
9.4.3 UICC platform as a Secondary Platform . 23
9.4.4 Capability exchange . 23
9.5 SSP Application . 23
9.5.1 Overview . 23
9.5.2 Lifecycle management . 23
9.6 Lifecycle management of Secondary Platform Bundles. 24
9.7 Secondary Platform Bundle family identifier . 24
10 Communication interface . 24
10.1 Low level protocol layers . 24
10.1.1 Physical layer . 24
10.1.2 Link layer . 24
10.2 SSP Common Layer . 24
10.3 Communication layers above SCL . 24
11 Certification . 24
11.1 Introduction . 24
11.2 Primary Platform certification . 25
11.2.1 Overview . 25
11.2.2 Security Capabilities . 25
11.3 Secondary Platform Bundle certification . 26
12 iSSP ecosystem and interfaces . 27
12.1 General architecture . 27
12.1.1 Introduction. 27
12.1.2 Architecture overview . 27
12.1.3 Entities . 27
12.1.4 Interfaces. 28
12.2 Security overview . 28
12.2.1 Public key infrastructures . 28
12.2.1.1 Public key infrastructure for Si4 interface . 28
12.2.1.1.1 Certificate chains . 28
12.2.1.1.2 Certificate description . 29
12.2.1.1.3 Algorithm identifiers and parameters . 32
12.2.1.1.4 Certification path verification . 33
ETSI

---------------------- Page: 4 ----------------------
Release 15 5 ETSI TS 103 666-2 V15.0.0 (2019-11)
12.2.1.1.5 Certificate revocation status verification . 33
12.2.2 Cryptographic algorithms . 34
12.2.2.1 Elliptic curve domain parameter sets . 34
12.2.2.2 Digital signature algorithm . 34
12.2.2.3 Key agreement algorithm . 34
12.2.2.4 Block cipher algorithm . 34
12.3 Secondary Platform Bundle provisioning procedure . 35
12.3.1 Overview . 35
12.3.2 Preparation procedure . 36
12.3.2.1 Overview . 36
12.3.2.2 Secondary Platform Bundle selection process . 37
12.3.2.3 Service provider reference creation process . 37
12.3.2.4 Cancellation of the preparation procedure . 38
12.3.3 Download procedure . 38
12.3.3.1 Capability negotiation . 38
12.3.3.2 Bound SPB image download. 41
12.3.4 Installation procedure . 43
12.4 Secondary Platform Bundle management procedure. 44
12.4.1 Enable a Secondary Platform Bundle . 44
12.4.2 Disable a Secondary Platform Bundle . 45
12.4.3 Delete a Secondary Platform Bundle . 45
12.5 Notification procedure . 46
12.5.1 Overview . 46
12.5.2 Notification of the service provider . 46
12.6 Interfaces and functions . 47
12.6.1 Overview . 47
12.6.2 Common features . 48
12.6.2.1 Common data types . 48
12.6.2.2 SSP information . 48
12.6.2.2.1 Introduction . 48
12.6.2.2.2 Public SSP information . 48
12.6.2.2.3 Protected SSP information. 50
12.6.2.3 SPBM credential . 50
12.6.2.4 SSP credential . 51
12.6.2.5 Bound SPB image . 52
12.6.2.6 SPB metadata . 53
12.6.2.7 Terminal information . 54
12.6.3 Si1 interface . 54
12.6.3.1 Overview . 54
12.6.3.2 Si1 common headers . 55
12.6.3.2.1 Si1 command header . 55
12.6.3.2.2 Si1 response header . 55
12.6.3.3 Si1 error codes . 55
12.6.3.4 Si1.SelectSpb . 56
12.6.3.4.1 Command . 56
12.6.3.4.2 Procedure . 57
12.6.3.4.3 Response . 57
12.6.3.5 Si1.CreateSPReference . 58
12.6.3.5.1 Command . 58
12.6.3.5.2 Procedure . 59
12.6.3.5.3 Response . 59
12.6.3.6 Si1.FinalizePreparation . 60
12.6.3.6.1 Command . 60
12.6.3.6.2 Procedure . 61
12.6.3.6.3 Response . 61
12.6.3.7 Si1.CancelPreparation . 61
12.6.3.7.1 Command . 61
12.6.3.7.2 Procedure . 62
12.6.3.7.3 Response .
...