ETSI EN 301 033 V1.2.1 (2005-12)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands
Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands
REN/ERM-TG26-065
Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Tehnične karakteristike in merilne metode za ladijske stražne sprejemnike za sprejem digitalnega selektivnega klica (DSC) v pomorskih pasovih MF, MF/HF in VHF
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 033 V1.2.1:2006
01-april-2006
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&LQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50
7HKQLþQHNDUDNWHULVWLNHLQPHULOQHPHWRGH]DODGLMVNHVWUDåQHVSUHMHPQLNH]D
VSUHMHPGLJLWDOQHJDVHOHNWLYQHJDNOLFD'6&YSRPRUVNLKSDVRYLK0)0)+)LQ
9+)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical
characteristics and methods of measurement for shipborne watchkeeping receivers for
reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands
Ta slovenski standard je istoveten z: EN 301 033 Version 1.2.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
47.020.70 Navigacijska in krmilna Navigation and control
oprema equipment
SIST EN 301 033 V1.2.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 033 V1.2.1:2006
---------------------- Page: 2 ----------------------
SIST EN 301 033 V1.2.1:2006
ETSI EN 301 033 V1.2.1 (2005-12)
European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Technical characteristics and methods of measurement
for shipborne watchkeeping receivers
for reception of Digital Selective Calling (DSC)
in the maritime MF, MF/HF and VHF bands
---------------------- Page: 3 ----------------------
SIST EN 301 033 V1.2.1:2006
2 ETSI EN 301 033 V1.2.1 (2005-12)
Reference
REN/ERM-TG26-065
Keywords
DSC, maritime, radio, receiver
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2005.
All rights reserved.
TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 033 V1.2.1:2006
3 ETSI EN 301 033 V1.2.1 (2005-12)
Contents
Intellectual Property Rights.7
Foreword.7
1 Scope.8
2 References.8
3 Definitions and abbreviations.9
3.1 Definitions.9
3.2 Abbreviations.9
4 General and operational requirements.10
4.1 General.10
4.2 Construction.10
4.2.1 General.10
4.2.2 Design.10
4.2.3 Accessibility.10
4.2.4 Calibration and maintenance.10
4.2.5 Antenna static protection.10
4.2.6 Digital input panels.10
4.3 Controls and indicators.11
4.3.1 General.11
4.3.2 Identification.11
4.3.3 Protection against possible maladjustment .11
4.3.4 Light sources.11
4.3.5 Operation.11
4.4 Software.11
4.5 Memory.11
4.6 Interfaces.11
4.6.1 DSC signal output; analogue interface.12
4.6.2 DSC signal output; digital interface.12
4.6.3 Operational interfaces.12
4.7 Marking and identification .12
4.8 Instructions.13
4.9 Warming-up period.13
4.10 Safety precautions.13
4.10.1 Excessive current and voltage.13
4.10.2 Earthing.13
4.10.3 Protection.13
4.11 Compass safe distance.13
5 Technical requirements.14
5.1 Frequency bands and channels .14
5.2 Mode of reception .14
5.3 Scanning receivers.15
5.3.1 Scanning sequence.15
5.3.2 Scanning frequencies.15
5.3.2.1 DSC distress frequencies.15
5.3.2.2 DSC frequencies for general communication.15
5.3.3 Stop/start of scanning.15
5.3.4 Frequency information.15
6 General test conditions.15
6.1 General.15
6.2 Test power source.16
6.3 Normal test conditions.16
6.3.1 Normal temperature and humidity.16
6.3.2 Normal test power source .16
6.3.2.1 ac voltage and frequency.16
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 033 V1.2.1:2006
4 ETSI EN 301 033 V1.2.1 (2005-12)
6.3.2.2 Secondary battery power sources.16
6.3.2.3 Other power sources.16
6.4 Extreme test conditions .16
6.4.1 Extreme temperature tests.16
6.4.2 Extreme values of test power source .17
6.4.2.1 a.c. voltage and frequency.17
6.4.2.2 Secondary battery power sources.17
6.4.2.3 Other power sources.17
6.5 Connection of test signals to the receiver.17
6.5.1 Sources.17
6.5.2 Levels.17
6.6 Testing frequencies.17
6.6.1 General test frequencies.17
6.6.2 Additional test frequencies for HF equipment.18
6.7 Test signals.18
6.7.1 Standard test signal No. 1 .18
6.7.2 Standard test signal No. 2 .18
6.8 Measurement of bit error ratio.18
6.9 Measurement uncertainty and interpretation of the measuring results .19
6.9.1 Measurement uncertainty.19
6.9.2 Interpretation of measurement results.19
7 Environmental tests.19
7.1 Procedure.19
7.2 Performance check.20
7.3 Vibration test.20
7.3.1 Definition.20
7.3.2 Method of measurement.20
7.3.3 Requirement.20
7.4 Temperature tests.20
7.4.1 Dry heat.21
7.4.1.1 Definition.21
7.4.1.2 Method of measurement.21
7.4.1.3 Requirement.21
7.4.2 Damp heat.21
7.4.2.1 Definition.21
7.4.2.2 Method of measurement.21
7.4.2.3 Requirement.21
7.4.3 Low temperature.21
7.4.3.1 Definition.21
7.4.3.2 Method of measurement.22
7.4.3.3 Requirement.22
7.5 Corrosion test.22
7.5.1 General.22
7.5.2 Definition.22
7.5.3 Method of measurement.22
7.5.4 Requirements.22
8 MF/HF watchkeeping receiver.23
8.1 Calling sensitivity.23
8.1.1 Definition.23
8.1.2 Method of measurement.23
8.1.3 Limits.23
8.2 Adjacent channel selectivity.23
8.2.1 Definition.23
8.2.2 Method of measurement.23
8.2.3 Limits.24
8.3 Co-channel rejection.24
8.3.1 Definition.24
8.3.2 Method of measurements.24
8.3.3 Limits.24
8.4 RF intermodulation response.24
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 033 V1.2.1:2006
5 ETSI EN 301 033 V1.2.1 (2005-12)
8.4.1 Definition.24
8.4.2 Method of measurement.24
8.4.3 Limits.24
8.5 Spurious response rejection.25
8.5.1 Definition.25
8.5.2 Method of measurement.25
8.5.3 Limits.26
8.6 Dynamic range.26
8.6.1 Definition.26
8.6.2 Method of measurement.26
8.6.3 Limits.26
8.7 Conducted spurious emissions into the antenna .26
8.7.1 Definition.26
8.7.2 Method of measurement.26
8.7.3 Limits.27
8.8 Radiated spurious emissions.27
8.8.1 Definition.27
8.8.2 Method of measurements.27
8.8.3 Limit.28
8.9 Protection of receiver antenna input circuits .28
8.9.1 Definition.28
8.9.2 Method of measurement.28
8.9.3 Limits.28
8.10 Scanning efficiency.28
8.10.1 Definition.28
8.10.2 Method of measurement.28
8.10.3 Limits.28
8.11 Stop/start of scanning (Watchkeeping receiver without DSC decoder) .29
8.11.1 Definition.29
8.11.2 Method of measurement.29
8.11.3 Limits.29
9 VHF watchkeeping receiver.29
9.1 Calling sensitivity.29
9.1.1 Definition.29
9.1.2 Method of measurement.29
9.1.3 Limits.29
9.2 Adjacent channel selectivity.29
9.2.1 Definition.29
9.2.2 Method of measurement.30
9.2.3 Limits.30
9.3 Co-channel rejection.30
9.3.1 Definition.30
9.3.2 Method of measurement.30
9.3.3 Limits.30
9.4 Intermodulation response.30
9.4.1 Definition.30
9.4.2 Method of measurement.31
9.4.3 Limits.31
9.5 Spurious response and blocking immunity.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.