ETSI GS mWT 029-3 V1.1.1 (2024-12)

millimetre Wave Transmission (mWT); Conformance Test Specification for Wireless Transport Profile for Standard SDN Northbound Interfaces; Part 3: Abstract Test Suite (ATS) and Partial Implementation eXtra Information for Testing (PIXIT)

DGS/mWT-0029-3

General Information

• Status: Not Published
• Technical Committee: mWT - millimetre Wave Transmission
• Current Stage: 12 - Citation in the OJ (auto-insert)
• Due Date: 31-Dec-2024
• Completion Date: 23-Dec-2024

Standards Content (Sample)

GROUP SPECIFICATION
millimetre Wave Transmission (mWT);
Conformance Test Specification for Wireless Transport Profile
for Standard SDN Northbound Interfaces;
Part 3: Abstract Test Suite (ATS) and Partial Implementation
eXtra Information for Testing (PIXIT)
Disclaimer
The present document has been produced and approved by the millimetre Wave Transmission (mWT) ETSI Industry
Specification Group (ISG) and represents the views of those members who participated in this ISG.
It does not necessarily represent the views of the entire ETSI membership.

2 ETSI GS mWT 029-3 V1.1.1 (2024-12)

Reference
DGS/mWT-0029-3
Keywords
mWT, NBI, SDN, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2024.
All rights reserved.
ETSI
3 ETSI GS mWT 029-3 V1.1.1 (2024-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 7
3.1 Terms . 7
3.2 Symbols . 7
3.3 Abbreviations . 7
4 Conformance testing configurations. 8
4.1 Introduction . 8
4.2 Physical configuration . 8
4.3 Test Configuration . 9
4.3.1 Introduction. 9
4.3.2 Config_mWT_1 . 9
4.3.4 Config_mWT_2 . 9
5 Verification functions . 10
6 ATS conventions . 11
6.1 Introduction . 11
6.2 Naming conventions . 11 ®
Annex A (informative): ATS in Postman . 12 ®
A.1 Postman collection files and other related modules . 12
Annex B (normative): Partial PIXIT pro forma for Security . 13
B.1 The right to copy . 13
B.2 Introduction . 13
B.3 Identification summary. 13
B.4 ATS summary . 13
B.5 Test laboratory . 14
B.6 Client identification . 14
B.7 SUT . 14
B.8 Protocol layer information. 15
B.8.1 Protocol identification . 15
B.8.2 IUT information . 15
Annex C (normative): PCTR pro forma for Security . 18
C.1 The right to copy . 18
C.2 Introduction . 18
C.3 Identification summary. 18
C.3.1 Protocol conformance test report . 18
C.3.2 IUT identification . 18
C.3.3 Testing environment . 19
C.3.4 Limits and reservation . 19
ETSI
4 ETSI GS mWT 029-3 V1.1.1 (2024-12)
C.3.5 Comments. 19
C.4 IUT Conformance status . 19
C.5 Static conformance summary . 20
C.6 Dynamic conformance summary . 20
C.7 Static conformance review report . 20
C.8 Test campaign report . 20
C.9 Observations . 20
History . 21

ETSI
5 ETSI GS mWT 029-3 V1.1.1 (2024-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI IPR online database.
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™, LTE™ and 5G™ logo are trademarks of ETSI registered for the benefit of its Members and of the
3GPP Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of ®
the oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Group Specification (GS) has been produced by ETSI Industry Specification Group (ISG) millimeter Wave
Transmission (mWT).
The present document is part 3 of a multi-part deliverable covering Conformance Test Specification for Standard SDN
northbound APIs, as identified below:
Part 1: "Implementation Conformance Statement (ICS)";
Part 2: "Test Suite Structure (TSS) and Test Purposes (TP)";
Part 3: "Abstract Test Suite (ATS) and partial Implementation eXtra Information for Testing (PIXIT)".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
6 ETSI GS mWT 029-3 V1.1.1 (2024-12)
1 Scope ®
The present document provides parts of the Abstract Test Suite (ATS) for ETSI GS mWT 024 [1], based on Postman
runtime based Scripts [i.1].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found in the
ETSI docbox.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI GS mWT 024 (V1.2.1): "millimetre Wave Transmission (mWT); Definition of a Wireless
Transport Profile for Standard SDN Northbound Interfaces".
[2] IETF RFC 8453: "Framework for Abstraction and Control of TE Networks (ACTN)".
[3] ETSI GS mWT 029-1: "millimetre Wave Transmission (mWT); Conformance Test Specification
for Wireless Transport Profile for Standard SDN Northbound Interfaces; Part 1: Implementation
Conformance Statement (ICS)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] Single platform for collaborative API development.
NOTE 1: Available at www.postman.com. ®
NOTE 2: ETSI is not affiliated or sponsored by the Postman API repository.
[i.2] ISO/IEC 9646-6 (1994): "Information technology — Open Systems Interconnection —
Conformance testing methodology and framework — Part 6: Protocol profile test specification".
ETSI
7 ETSI GS mWT 029-3 V1.1.1 (2024-12)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the following terms apply:
access ethernet link: external ethernet link that is connected to a final user (e.g. NodeB), usually of UNI-C type
domain: (by default) entirety of the domain controlled by the PNC implementing the MPI under consideration
edge ethernet LTP: ethernet LTP that is connected to an external ethernet link
ethernet connection: bi-directional construct comprising two uni-directional ethernet links connecting a couple of
ethernet LTPs
external ethernet link: ethernet link that has one termination inside and the other one outside of the domain managed
by the PNC
full ethernet connectivity: complete reachability of all ethernet edge LTPs with one another
homogeneous region: subset of microwave network elements within a domain, that have full ethernet connectivity, and
provide the same VLAN functionality on all edge LTPs
inter-domain ethernet link: external ethernet link that is connected to a transport domain (e.g. router, DWDM, etc.) or
to another MW domain, usually of NNI type
internal ethernet link: ethernet link connecting Ethernet LTPs belonging the TE Ethernet topology of the domain
managed by the PNC
multi-region domain: microwave domain that is composed internally by more than one homogeneous region, lacking
full ethernet connectivity amongst them
partial ethernet connectivity: incomplete reachability of some ethernet edge LTPs with one another
VLAN isolation: capability of a homogeneous region to isolate the internal VLAN addressing space for path selection
from any external one
VLAN transparency: lack of VLAN isolation capability by a homogeneous region
3.2 Symbols
Void.
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
API Application Programming Interface
ATS Abstract Test Suite
BO Invalid Behaviour
BV Valid Behaviour
CBS Committed Burst Size
CIR Committed Information Rate
DWDM Dense Wavelength Division Multiplexing
EBS Excess Burst Size
EIR Excess Information Rate
ETH ETHernet
ICS Implementation Conformance Statement
IP Internet Protocol
LTP Link termination point
MDSC Multi-Domain Service Coordinator
ETSI
8 ETSI GS mWT 029-3 V1.1.1 (2024-12)
MPI MDSC-PNC Interface
MW Microwave
mWT millimetre Wave Transmission
NNI Network Network Interface
PCTR Protocol Conformance Test Report
PIXIT Partial Implementation eXtra Information for Testing
PNC Provisioning Network Controller
RFC Request for Comments
SAP Service Access Point
SCS System Conformance Statements
SCTR System Conformance Test Report
SDN Software Defined Networking
SUT System Under Test
TC Test case
...