Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 17.0.0 Release 17)

RTS/TSGR-0425104vh00

General Information

Status
Not Published
Current Stage
12 - Completion
Completion Date
27-Apr-2022
Ref Project

Buy Standard

Standard
ETSI TS 125 104 V17.0.0 (2022-04) - Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 17.0.0 Release 17)
English language
134 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 125 104 V17.0.0 (2022-04)






TECHNICAL SPECIFICATION
Universal Mobile Telecommunications System (UMTS);
Base Station (BS) radio transmission and reception (FDD)
(3GPP TS 25.104 version 17.0.0 Release 17)

---------------------- Page: 1 ----------------------
3GPP TS 25.104 version 17.0.0 Release 17 1 ETSI TS 125 104 V17.0.0 (2022-04)

Reference
RTS/TSGR-0425104vh00
Keywords
UMTS
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure Program:
https://www.etsi.org/standards/coordinated-vulnerability-disclosure
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
and/or governmental
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2022.
All rights reserved.

ETSI

---------------------- Page: 2 ----------------------
3GPP TS 25.104 version 17.0.0 Release 17 2 ETSI TS 125 104 V17.0.0 (2022-04)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its

Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 25.104 version 17.0.0 Release 17 3 ETSI TS 125 104 V17.0.0 (2022-04)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 7
1 Scope . 8
2 References . 8
3 Definitions and abbreviations . 8
3.1 Definitions . 8
3.2 Abbreviations . 11
3.3 Symbols . 11
4 General . 12
4.1 Relationship between Minimum Requirements and Test Requirements . 12
4.2 Base station classes . 12
4.3 Regional requirements . 13
4.4 Environmental requirements for the BS equipment . 15
4.5 Applicability of requirements . 15
4.6 Requirements for contiguous and non-contiguous spectrum . 15
4.7 Requirements for BS capable of multi-band operation . 16
5 Frequency bands and channel arrangement . 16
5.1 General . 16
5.2 Frequency bands . 17
5.3 Tx-Rx frequency separation . 19
5.4 Channel arrangement . 20
5.4.1 Channel spacing . 20
5.4.2 Channel raster . 20
5.4.3 Channel number . 20
6 Transmitter characteristics . 22
6.1 General . 22
6.2 Base station output power . 23
6.2.1 Base station maximum output power . 23
6.2.1.1 Minimum requirement . 23
6.3 Frequency error . 24
6.3.1 Minimum requirement . 24
6.4 Output power dynamics . 24
6.4.1 Inner loop power control in the downlink . 24
6.4.1.1 Power control steps . 24
6.4.1.1.1 Minimum requirement . 24
6.4.2 Power control dynamic range . 25
6.4.2.1 Minimum requirements . 25
6.4.3 Total power dynamic range . 25
6.4.3.1 Minimum requirement . 25
6.4.4 Primary CPICH power . 25
6.4.4.1 Minimum requirement . 25
6.4.4A Secondary CPICH power . 25
6.4.4A.1 Minimum Requirement for MIMO mode . 26
6.4.4A.2 Minimum Requirement for MIMO mode with four transmit antennas . 26
6.4.4B Demodulation CPICH power for MIMO mode with four transmit antennas . 26
6.4.4B.1 Minimum Requirement . 26
6.4.5 IPDL time mask . 26
6.4.5.1 Minimum Requirement . 26
6.4.6 Home base station output power for adjacent channel protection . 27
6.4.6.1 Minimum requirement . 28
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 25.104 version 17.0.0 Release 17 4 ETSI TS 125 104 V17.0.0 (2022-04)
6.5 (void) . 28
6.6 Output RF spectrum emissions . 28
6.6.1 Occupied bandwidth . 28
6.6.1.1 Minimum requirement . 28
6.6.2 Out of band emission . 28
6.6.2.1 Spectrum emission mask . 28
6.6.2.2 Adjacent Channel Leakage power Ratio (ACLR) . 34
6.6.2.2.1 Minimum requirement . 35
6.6.2.2.2 Cumulative ACLR requirement in non-contiguous spectrum . 35
6.6.3 Spurious emissions . 36
6.6.3.1 Mandatory Requirements . 37
6.6.3.1.1 Spurious emissions (Category A) . 37
6.6.3.1.2 Spurious emissions (Category B) . 37
6.6.3.2 Protection of the BS receiver of own or different BS . 39
6.6.3.2.1 Minimum Requirement . 39
6.6.3.3 Co-existence with other systems in the same geographical area . 41
6.6.3.3.1 Minimum Requirements . 41
6.6.3.4 Co-existence with co-located and co-sited base stations . 47
6.6.3.4.1 Minimum Requirements . 47
6.6.3.5 Co-existence with PHS . 57
6.6.3.5.1 Minimum Requirement . 57
6.6.3.6 Co-existence with services in adjacent frequency bands. 57
6.6.3.6.1 Minimum requirement . 57
6.6.3.7 (Void) . 57
6.6.3.8 Protection of Public Safety Operations . 57
6.6.3.8.1 Minimum Requirement . 57
6.6.3.9 Co-existence with Home BS operating in other bands . 58
6.6.3.9.1 Minimum Requirements . 59
6.7 Transmitter intermodulation . 61
6.7.1 Minimum requirement . 61
6.8 Transmit modulation . 61
6.8.1 Transmit pulse shape filter . 62
6.8.2 Error Vector Magnitude . 62
6.8.2.1 Minimum requirement . 62
6.8.3 Peak code Domain error . 62
6.8.3.1 Minimum requirement . 62
6.8.4 Time alignment error . 62
6.8.4.1 Minimum Requirements . 63
6.8.5 Relative Code Domain Error for 64QAM modulation. 63
6.8.5.1 Minimum requirement . 63
7 Receiver characteristics . 63
7.1 General . 63
7.2 Reference sensitivity level . 64
7.2.1 Minimum requirement . 64
7.2.2 Maximum Frequency Deviation for Receiver Performance . 64
7.3 Dynamic range . 64
7.3.1 Minimum requirement . 65
7.4 Adjacent Channel Selectivity (ACS) . 65
7.4.1 Minimum requirement . 65
7.4.2 Minimum requirement - Co-location with UTRA-TDD . 65
7.5 Blocking characteristics . 66
7.5.1 Minimum requirement . 66
7.5.2 Minimum Requirement - Co-location with GSM, DCS, PCS, CDMA, UTRA and/or E-UTRA,
UTRA TDD, E-UTRA TDD and/or NR . 77
7.5.3 Void . 88
7.6 Intermodulation characteristics . 88
7.6.1 Minimum requirement . 88
7.7 Spurious emissions . 90
7.7.1 Minimum requirement . 90
8 Performance requirement . 91
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 25.104 version 17.0.0 Release 17 5 ETSI TS 125 104 V17.0.0 (2022-04)
8.1 General . 91
8.2 Demodulation in static propagation conditions . 92
8.2.1 Demodulation of DCH . 92
8.2.1.1 Minimum requirement . 92
8.3 Demodulation of DCH in multipath fading conditions . 92
8.3.1 Multipath fading Case 1 . 92
8.3.1.1 Minimum requirement . 92
8.3.2 Multipath fading Case 2 . 93
8.3.2.1 Minimum requirement . 93
8.3.3 Multipath fading Case 3 . 93
8.3.3.1 Minimum requirement . 94
8.3.4 Multipath fading Case 4 . 94
8.3.4.1 Minimum requirement . 94
8.4 Demodulation of DCH in moving propagation conditions . 94
8.4.1 Minimum requirement . 95
8.5 Demodulation of DCH in birth/death propagation conditions . 95
8.5.1 Minimum requirement . 95
8.5A Demodulation of DCH in high speed train conditions . 95
8.5A.1 General . 95
8.5A.2 Minimum requirement . 96
8.6 (void) . 96
8.7 Performance requirement for RACH . 96
8.7.1 Performance requirement for RACH preamble detection . 96
8.7.2 Demodulation of RACH message . 97
8.7.2.1 Minimum requirements for Static Propagation Condition . 97
8.7.2.2 Minimum requirements for Multipath Fading Case 3 . 97
8.7.2.3 Minimum requirements for high speed train conditions . 97
8.8 (void) . 98
8.9 (void) . 98
8.10 Performance of ACK/NACK detection for HS-DPCCH . 98
8.10.1 ACK false alarm . 98
8.10.2 ACK mis-detection . 98
8.10A Performance of ACK/NACK detection for 4C-HSDPA HS-DPCCH . 98
8.10A.1 Performance requirements . 99
8.10A.1.1 ACK false alarm . 99
8.10A.1.2 ACK mis-detection. 99
8.10A.2 Applicability of requirements . 100
8.10B Performance of ACK/NACK detection for 8C-HSDPA HS-DPCCH . 100
8.11 Demodulation of E-DPDCH in multipath fading condition . 101
8.11A Demodulation of E-DPDCH and S-E-DPDCH in multipath fading condition for UL MIMO. 102
8.12 Performance of signaling detection for E-DPCCH in multipath fading condition . 102
Annex A (normative): Measurement channels . 104
A.1 Summary of UL reference measurement channels . 104
A.2 UL reference measurement channel for 12.2 kbps . 105
A.3 UL reference measurement channel for 64 kbps . 106
A.4 UL reference measurement channel for 144 kbps . 107
A.5 UL reference measurement channel for 384 kbps . 108
A.6 (void) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.