ETSI EN 301 489-52 V1.2.1 (2021-11)
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
DEN/ERM-EMC-354
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 52. del: Posebni pogoji za celično komunikacijsko uporabniško (UE) radijsko in pomožno opremo - Harmonizirani standard za elektromagnetno združljivost
Ta dokument določa veljavne preskusne pogoje, oceno zmogljivosti in kriterije zmogljivosti za celično komunikacijsko uporabniško opremo (UE), vključno z opremo v prostorih stranke (CPE), komunikatorji (STB), ki vsebujejo celično komunikacijsko tehnologijo, in povezano pomožno opremo v zvezi z elektromagnetno združljivostjo (EMC) za opremo, ki uporablja tehnologije, navedene v preglednici 1.
Ta dokument ne vključuje tehničnih specifikacij v zvezi z antenskim vhodom radijske opreme in sevanjem iz vhoda na ohišju radijske opreme ter kombinacijami radijske opreme in povezane pomožne opreme. Take tehnične specifikacije so običajno navedene v ustreznih standardih za izdelek na področju učinkovite uporabe radijskega spektra.
OPOMBA 1: Razmerje med tem dokumentom in bistvenimi zahtevami člena 3.1(b) Direktive 2014/53/EU [i.2] je podano v dodatku A.
OPOMBA 2: Ta dokument ne zajema radijskih baznih postaj, kot je navedeno v standardu ETSI EN 301 489-50 [i.13].
General Information
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 489-52 V1.2.1:2022
01-januar-2022
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 52.
del: Posebni pogoji za celično komunikacijsko uporabniško (UE) radijsko in
pomožno opremo - Harmonizirani standard za elektromagnetno združljivost
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part
52: Specific conditions for Cellular Communication User Equipment (UE) radio and
ancillary equipment - Harmonised Standard for ElectroMagnetic Compatibility
Ta slovenski standard je istoveten z: ETSI EN 301 489-52 V1.2.1 (2021-11)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 489-52 V1.2.1:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 489-52 V1.2.1:2022
---------------------- Page: 2 ----------------------
SIST EN 301 489-52 V1.2.1:2022
ETSI EN 301 489-52 V1.2.1 (2021-11)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication
User Equipment (UE) radio and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility
---------------------- Page: 3 ----------------------
SIST EN 301 489-52 V1.2.1:2022
2 ETSI EN 301 489-52 V1.2.1 (2021-11)
Reference
DEN/ERM-EMC-354
Keywords
EMC, GSM, harmonised standard, LTE, MSR, NR,
OFDMA, WCDMA, WMAN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 489-52 V1.2.1:2022
3 ETSI EN 301 489-52 V1.2.1 (2021-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Test conditions . 13
4.1 General . 13
4.2 Arrangements for test signals . 13
4.2.0 General . 13
4.2.1 Reference Sensitivity Level . 13
4.2.2 Arrangements for test signals for GSM . 13
4.2.3 Arrangements for test signals for UTRA and E-UTRA . 13
4.2.4 Arrangements for test signals for NR . 14
4.2.4.1 General for NR . 14
4.2.4.2 NR FR1 SA . 14
4.2.4.3 NR FR1 NSA . 14
4.2.5 Arrangements for test signals at the output of transmitters . 15
4.2.6 Arrangements for test signals at the input of receivers . 15
4.2.6.1 General . 15
4.2.6.2 Arrangements for test signals at the input of GSM receivers . 15
4.2.6.3 Arrangements for test signals at the input of UTRA and E-UTRA receivers . 15
4.2.6.4 Arrangements for test signals at the input of E-UTRA with LAA . 16
4.2.6.5 Arrangements for test signals at the input of E-UTRA with in band or guard band NB-IoT,
Standalone NB-IoT . 16
4.2.6.6 Arrangements for test signals at the input of NR receivers . 16
4.3 Exclusion bands . 16
4.3.1 GSM Transmitter exclusion band . 16
4.3.2 GSM Receiver exclusion band. 16
4.3.3 UTRA and E-UTRA Transmitter exclusion band . 16
4.3.3.1 UTRA . 16
4.3.3.2 E-UTRA . 16
4.3.4 UTRA and E-UTRA Receiver exclusion band . 17
4.3.5 NR SA and NSA Transmitter exclusion band. 17
4.3.6 NR SA and NSA Receiver exclusion band . 17
4.4 Narrow band responses of receivers and receivers of duplex transceivers . 17
4.4.1 GSM Narrow band responses on receivers . 17
4.4.2 UTRA and E-UTRA Narrow band responses on receivers. 18
4.4.2.1 UTRA . 18
4.4.2.2 E-UTRA . 18
4.4.3 NR Narrow band responses on receivers . 19
5 Ancillary equipment . 19
6 Performance criteria . 19
6.1 Performance criteria for Continuous phenomena . 19
6.1.1 GSM and voice call. 19
6.1.1.1 Performance criteria for Continuous phenomena applied to Transmitters (CT) . 19
6.1.1.2 Performance criteria for Continuous phenomena applied to Receivers (CR) . 19
6.1.2 UTRA . 20
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 489-52 V1.2.1:2022
4 ETSI EN 301 489-52 V1.2.1 (2021-11)
6.1.3 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 20
6.1.4 NR . 20
6.2 Performance criteria for Transient phenomena . 20
7 Requirements . 20
7.1 General . 20
7.2 Emission . 21
7.2.1 General . 21
7.2.2 Special conditions . 21
7.3 Immunity . 21
7.3.1 General . 21
7.3.2 Special conditions . 22
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 23
Annex B (normative): Performance assessment voice call, Audio breakthrough . 25
B.1 Calibration of audio levels . 25
B.2 Measurement of audio levels . 26
Annex C (normative): Performance assessment of data transfer call, Error Ratios . 27
C.1 Calibration of data transfer . 27
C.1.1 UTRA . 27
C.1.2 E-UTRA and NR . 27
C.2 Assessment of data transfer . 27
C.2.1 UTRA, Derivation of Error Ratios . 27
C.2.2 E-UTRA and NR, Derivation of Throughput Percentages . 28
C.3 EUT without data application ancillary . 28
C.4 EUT with data application ancillary . 28
Annex D (informative): Change history . 30
History . 31
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 489-52 V1.2.1:2022
5 ETSI EN 301 489-52 V1.2.1 (2021-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document is part 52 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates
Date of adoption of this EN: 19 November 2021
Date of latest announcement of this EN (doa): 28 February 2022
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2022
Date of withdrawal of any conflicting National Standard (dow): 31 August 2023
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 489-52 V1.2.1:2022
6 ETSI EN 301 489-52 V1.2.1 (2021-11)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 489-52 V1.2.1:2022
7 ETSI EN 301 489-52 V1.2.1 (2021-11)
1 Scope
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
Cellular Communication User Equipment (UE), including Customer Premise Equipment (CPE), Set Top Box (STB)
containing cellular communication technologies, and the associated ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC) for equipment utilizing the technologies in table 1.
Table 1: Technologies User Equipment (UE) radio and ancillary equipment Cellular Communication
Cellular Mobile Communication Technology
Standard Set ETSI Standard
Technology Generation
Global System for Mobile 2G/3G IMT-2000 SC single carrier ETSI EN 301 511 [i.9]
communications (GSM)
CDMA Multi-Carrier (cdma2000) 2G/3G IS-95/CDMA2000 - IMT-MC ETSI EN 301 908-4 [i.10]
multi carrier
CDMA Direct Spread (UTRA FDD) 3G IMT-2000 Direct Spread ETSI EN 301 908-2 [i.11]
Evolved Universal Terrestrial Radio 4G IMT-advanced ETSI EN 301 908-13 [i.12]
Access (E-UTRA)
New Radio (NR) 5G IMT-2020 ETSI TS 138 521-1 [15],
ETSI TS 138 521-3 [16]
Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port
of radio equipment and combinations of radio and associated ancillary equipment are not included in the present
document. Such technical specifications are normally found in the relevant product standards for the effective use of the
radio spectrum.
NOTE 1: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.2] is given in annex A.
NOTE 2: The present document does not cover the radio base stations as specified in ETSI EN 301 489-50 [i.13].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 134 108 (V15.2.0) (10-2019): "Universal Mobile Telecommunications System (UMTS);
LTE; Common test environments for User Equipment (UE); Conformance testing (3GPP
TS 34.108 version 15.2.0 Release 15)".
[3] ETSI TS 125 101 (V16.1.0) (11-2020): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 16.1.0
Release 16)".
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 489-52 V1.2.1:2022
8 ETSI EN 301 489-52 V1.2.1 (2021-11)
[4] ETSI TS 134 109 (V16.0.0) (07-2020): "Universal Mobile Telecommunications System (UMTS);
Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109
version 16.0.0 Release 16)".
[5] ETSI EN 300 296-1 (V1.4.1) (08-2013): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily
for analogue speech; Part 1: Technical characteristics and methods of measurement".
[6] Recommendation ITU-T P.64 (06/2019): "Determination of sensitivity/frequency characteristics of
local telephone systems".
[7] Recommendation ITU-T P.76 (11/1988): "Determination of loudness ratings; fundamental
principles".
[8] ETSI TS 125 102 (V16.0.0) (08-2020): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 16.0.0
Release 16)".
[9] ETSI TS 136 101 (V14.18.0) (05-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) radio transmission and reception (3GPP TS 36.101
version 14.18.0 Release 14)".
[10] ETSI TS 136 508 (V16.8.0) (06-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE)
conformance testing (3GPP TS 36.508 version 16.8.0 Release 16)".
[11] ETSI TS 136 509 (V16.0.0) (05-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User
Equipment (UE) (3GPP TS 36.509 version 16.0.0 Release 16)".
[12] ETSI TS 136 521-1 (V16.8.1) (06-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception;
Part 1: Conformance testing (3GPP TS 36.521-1 version 16.8.1 Release 16)".
[13] ETSI TS 138 508-1 (V16.7.0) (06-2021): "5G; 5GS; User Equipment (UE) conformance
specification; Part 1: Common test environment (3GPP TS 38.508-1 version 16.7.0 Release 16)".
[14] ETSI TS 138 101-1 (V16.7.0) (05-2021): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 1: Range 1 Standalone (3GPP TS 38.101-1 version 16.7.0 Release 16)".
[15] ETSI TS 138 521-1 (V16.6.0) (02-2021): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 1: Range 1 standalone (3GPP TS 38.521-1
version 16.6.0 Release 16)".
[16] ETSI TS 138 521-3 (V16.5.0) (11-2020): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 3: Range 1 and Range 2 Interworking
operation with other radios (3GPP TS 38.521-3 version 16.5.0 Release 16)".
[17] EN 55035:2017 + A11:2020: "Electromagnetic compatibility of multimedia equipment - Immunity
requirements" (produced by CENELEC).
[18] ETSI TS 100 910 (V8.20.0): "Digital cellular telecommunications system (Phase 2+); Radio
Transmission and Reception (3GPP TS 05.05 version 8.20.0 Release 1999)".
[19] Void.
ETSI
---------------------- Page: 10 ----------------------
SIST EN 301 489-52 V1.2.1:2022
9 ETSI EN 301 489-52 V1.2.1 (2021-11)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 121 905 (V15.1.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP
Specifications (3GPP TR 21.905 version 15.1.0 Release 15)".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI TR 125 990 (V3.0.0): "Universal Mobile Telecommunications System (UMTS); Vocabulary
(3G TR 25.990 version 3.0.0 Release 1999)".
[i.4] Commission Implementing Decision C (2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.5] ETSI GTS 05.08 (V3.8.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control (GSM 05.08)".
NOTE: The technical content of ETSI I-ETS 300 034-1 has been transferred into ETSI GTS 05.08 (V3.8.0).
[i.6] ETSI GTS 05.08-DCS (V3.0.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control; (GSM 05.08 - DCS-1800)".
NOTE: The technical content of ETSI I-ETS 300 034-2 has been transferred into ETSI GTS 05.08-DCS (V3.0.0).
[i.7] ETSI ETS 300 578 (Edition 13) (03-1999): "Digital cellular telecommunications system (Phase 2)
(GSM); Radio subsystem link control (GSM 05.08 version 4.22.1)".
[i.8] Void.
[i.9] ETSI EN 301 511 (V12.5.1) (03-2017): "Global System for Mobile communications (GSM);
Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU".
[i.10] ETSI EN 301 908-4 (V6.2.1) (06-2013): "IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier
(cdma2000) User Equipment (UE)".
[i.11] ETSI EN 301 908-2 (V11.1.2) (08-2017): "IMT cellular networks; Harmonised Sta
...
ETSI EN 301 489-52 V1.2.1 (2021-11)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication
User Equipment (UE) radio and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility
---------------------- Page: 1 ----------------------
2 ETSI EN 301 489-52 V1.2.1 (2021-11)
Reference
DEN/ERM-EMC-354
Keywords
EMC, GSM, harmonised standard, LTE, MSR, NR,
OFDMA, WCDMA, WMAN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 489-52 V1.2.1 (2021-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Test conditions . 13
4.1 General . 13
4.2 Arrangements for test signals . 13
4.2.0 General . 13
4.2.1 Reference Sensitivity Level . 13
4.2.2 Arrangements for test signals for GSM . 13
4.2.3 Arrangements for test signals for UTRA and E-UTRA . 13
4.2.4 Arrangements for test signals for NR . 14
4.2.4.1 General for NR . 14
4.2.4.2 NR FR1 SA . 14
4.2.4.3 NR FR1 NSA . 14
4.2.5 Arrangements for test signals at the output of transmitters . 15
4.2.6 Arrangements for test signals at the input of receivers . 15
4.2.6.1 General . 15
4.2.6.2 Arrangements for test signals at the input of GSM receivers . 15
4.2.6.3 Arrangements for test signals at the input of UTRA and E-UTRA receivers . 15
4.2.6.4 Arrangements for test signals at the input of E-UTRA with LAA . 16
4.2.6.5 Arrangements for test signals at the input of E-UTRA with in band or guard band NB-IoT,
Standalone NB-IoT . 16
4.2.6.6 Arrangements for test signals at the input of NR receivers . 16
4.3 Exclusion bands . 16
4.3.1 GSM Transmitter exclusion band . 16
4.3.2 GSM Receiver exclusion band. 16
4.3.3 UTRA and E-UTRA Transmitter exclusion band . 16
4.3.3.1 UTRA . 16
4.3.3.2 E-UTRA . 16
4.3.4 UTRA and E-UTRA Receiver exclusion band . 17
4.3.5 NR SA and NSA Transmitter exclusion band. 17
4.3.6 NR SA and NSA Receiver exclusion band . 17
4.4 Narrow band responses of receivers and receivers of duplex transceivers . 17
4.4.1 GSM Narrow band responses on receivers . 17
4.4.2 UTRA and E-UTRA Narrow band responses on receivers. 18
4.4.2.1 UTRA . 18
4.4.2.2 E-UTRA . 18
4.4.3 NR Narrow band responses on receivers . 19
5 Ancillary equipment . 19
6 Performance criteria . 19
6.1 Performance criteria for Continuous phenomena . 19
6.1.1 GSM and voice call. 19
6.1.1.1 Performance criteria for Continuous phenomena applied to Transmitters (CT) . 19
6.1.1.2 Performance criteria for Continuous phenomena applied to Receivers (CR) . 19
6.1.2 UTRA . 20
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 489-52 V1.2.1 (2021-11)
6.1.3 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 20
6.1.4 NR . 20
6.2 Performance criteria for Transient phenomena . 20
7 Requirements . 20
7.1 General . 20
7.2 Emission . 21
7.2.1 General . 21
7.2.2 Special conditions . 21
7.3 Immunity . 21
7.3.1 General . 21
7.3.2 Special conditions . 22
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 23
Annex B (normative): Performance assessment voice call, Audio breakthrough . 25
B.1 Calibration of audio levels . 25
B.2 Measurement of audio levels . 26
Annex C (normative): Performance assessment of data transfer call, Error Ratios . 27
C.1 Calibration of data transfer . 27
C.1.1 UTRA . 27
C.1.2 E-UTRA and NR . 27
C.2 Assessment of data transfer . 27
C.2.1 UTRA, Derivation of Error Ratios . 27
C.2.2 E-UTRA and NR, Derivation of Throughput Percentages . 28
C.3 EUT without data application ancillary . 28
C.4 EUT with data application ancillary . 28
Annex D (informative): Change history . 30
History . 31
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 489-52 V1.2.1 (2021-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document is part 52 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates
Date of adoption of this EN: 19 November 2021
Date of latest announcement of this EN (doa): 28 February 2022
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2022
Date of withdrawal of any conflicting National Standard (dow): 31 August 2023
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 489-52 V1.2.1 (2021-11)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 301 489-52 V1.2.1 (2021-11)
1 Scope
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
Cellular Communication User Equipment (UE), including Customer Premise Equipment (CPE), Set Top Box (STB)
containing cellular communication technologies, and the associated ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC) for equipment utilizing the technologies in table 1.
Table 1: Technologies User Equipment (UE) radio and ancillary equipment Cellular Communication
Cellular Mobile Communication Technology
Standard Set ETSI Standard
Technology Generation
Global System for Mobile 2G/3G IMT-2000 SC single carrier ETSI EN 301 511 [i.9]
communications (GSM)
CDMA Multi-Carrier (cdma2000) 2G/3G IS-95/CDMA2000 - IMT-MC ETSI EN 301 908-4 [i.10]
multi carrier
CDMA Direct Spread (UTRA FDD) 3G IMT-2000 Direct Spread ETSI EN 301 908-2 [i.11]
Evolved Universal Terrestrial Radio 4G IMT-advanced ETSI EN 301 908-13 [i.12]
Access (E-UTRA)
New Radio (NR) 5G IMT-2020 ETSI TS 138 521-1 [15],
ETSI TS 138 521-3 [16]
Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port
of radio equipment and combinations of radio and associated ancillary equipment are not included in the present
document. Such technical specifications are normally found in the relevant product standards for the effective use of the
radio spectrum.
NOTE 1: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.2] is given in annex A.
NOTE 2: The present document does not cover the radio base stations as specified in ETSI EN 301 489-50 [i.13].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 134 108 (V15.2.0) (10-2019): "Universal Mobile Telecommunications System (UMTS);
LTE; Common test environments for User Equipment (UE); Conformance testing (3GPP
TS 34.108 version 15.2.0 Release 15)".
[3] ETSI TS 125 101 (V16.1.0) (11-2020): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 16.1.0
Release 16)".
ETSI
---------------------- Page: 7 ----------------------
8 ETSI EN 301 489-52 V1.2.1 (2021-11)
[4] ETSI TS 134 109 (V16.0.0) (07-2020): "Universal Mobile Telecommunications System (UMTS);
Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109
version 16.0.0 Release 16)".
[5] ETSI EN 300 296-1 (V1.4.1) (08-2013): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily
for analogue speech; Part 1: Technical characteristics and methods of measurement".
[6] Recommendation ITU-T P.64 (06/2019): "Determination of sensitivity/frequency characteristics of
local telephone systems".
[7] Recommendation ITU-T P.76 (11/1988): "Determination of loudness ratings; fundamental
principles".
[8] ETSI TS 125 102 (V16.0.0) (08-2020): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 16.0.0
Release 16)".
[9] ETSI TS 136 101 (V14.18.0) (05-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) radio transmission and reception (3GPP TS 36.101
version 14.18.0 Release 14)".
[10] ETSI TS 136 508 (V16.8.0) (06-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE)
conformance testing (3GPP TS 36.508 version 16.8.0 Release 16)".
[11] ETSI TS 136 509 (V16.0.0) (05-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User
Equipment (UE) (3GPP TS 36.509 version 16.0.0 Release 16)".
[12] ETSI TS 136 521-1 (V16.8.1) (06-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception;
Part 1: Conformance testing (3GPP TS 36.521-1 version 16.8.1 Release 16)".
[13] ETSI TS 138 508-1 (V16.7.0) (06-2021): "5G; 5GS; User Equipment (UE) conformance
specification; Part 1: Common test environment (3GPP TS 38.508-1 version 16.7.0 Release 16)".
[14] ETSI TS 138 101-1 (V16.7.0) (05-2021): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 1: Range 1 Standalone (3GPP TS 38.101-1 version 16.7.0 Release 16)".
[15] ETSI TS 138 521-1 (V16.6.0) (02-2021): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 1: Range 1 standalone (3GPP TS 38.521-1
version 16.6.0 Release 16)".
[16] ETSI TS 138 521-3 (V16.5.0) (11-2020): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 3: Range 1 and Range 2 Interworking
operation with other radios (3GPP TS 38.521-3 version 16.5.0 Release 16)".
[17] EN 55035:2017 + A11:2020: "Electromagnetic compatibility of multimedia equipment - Immunity
requirements" (produced by CENELEC).
[18] ETSI TS 100 910 (V8.20.0): "Digital cellular telecommunications system (Phase 2+); Radio
Transmission and Reception (3GPP TS 05.05 version 8.20.0 Release 1999)".
[19] Void.
ETSI
---------------------- Page: 8 ----------------------
9 ETSI EN 301 489-52 V1.2.1 (2021-11)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 121 905 (V15.1.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP
Specifications (3GPP TR 21.905 version 15.1.0 Release 15)".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI TR 125 990 (V3.0.0): "Universal Mobile Telecommunications System (UMTS); Vocabulary
(3G TR 25.990 version 3.0.0 Release 1999)".
[i.4] Commission Implementing Decision C (2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.5] ETSI GTS 05.08 (V3.8.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control (GSM 05.08)".
NOTE: The technical content of ETSI I-ETS 300 034-1 has been transferred into ETSI GTS 05.08 (V3.8.0).
[i.6] ETSI GTS 05.08-DCS (V3.0.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control; (GSM 05.08 - DCS-1800)".
NOTE: The technical content of ETSI I-ETS 300 034-2 has been transferred into ETSI GTS 05.08-DCS (V3.0.0).
[i.7] ETSI ETS 300 578 (Edition 13) (03-1999): "Digital cellular telecommunications system (Phase 2)
(GSM); Radio subsystem link control (GSM 05.08 version 4.22.1)".
[i.8] Void.
[i.9] ETSI EN 301 511 (V12.5.1) (03-2017): "Global System for Mobile communications (GSM);
Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU".
[i.10] ETSI EN 301 908-4 (V6.2.1) (06-2013): "IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier
(cdma2000) User Equipment (UE)".
[i.11] ETSI EN 301 908-2 (V11.1.2) (08-2017): "IMT cellular networks; Harmonised Standard covering
the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread
(UTRA FDD) User Equipment (UE)".
[i.12] ETSI EN 301 908-13 (V11.1.2) (07-2017): "IMT cellular networks; Harmonised Standard
covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved
Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)".
[i.13] ETSI EN 301 489-50 (V2.2.1) (04-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 50: Specific conditions for Cellular Communication Base
Station (BS), repeater and ancillary equipment; Harmonised Standard covering the essential
requirements of article 3.1(b) of Directive 2014/53/EU".
ETSI
---------------------- Page: 9 ----------------------
10 ETSI EN 301 489-52 V1.2.1 (2021-11)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:
ancillary equipment: electrical or electronic equipment, that is intended to be used with a receiver or transmitter
NOTE 1: It is considered as an ancillary equipment if:
the equipment is intended for use with a receiver or transmitter to provide additional operational
and/or control features to the radio equipment (e.g. to extend control to another position or
l
...
Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication
User Equipment (UE) radio and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
Reference
DEN/ERM-EMC-354
Keywords
EMC, GSM, harmonised standard, LTE, MSR, NR,
OFDMA, WCDMA, WMAN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 9
3 Definition of terms, symbols and abbreviations . 10
3.1 Terms . 10
3.2 Symbols . 12
3.3 Abbreviations . 12
4 Test conditions . 13
4.1 General . 13
4.2 Arrangements for test signals . 13
4.2.0 General . 13
4.2.1 Reference Sensitivity Level . 13
4.2.2 Arrangements for test signals for GSM . 13
4.2.3 Arrangements for test signals for UTRA and E-UTRA . 13
4.2.4 Arrangements for test signals for NR . 14
4.2.4.1 General for NR . 14
4.2.4.2 NR FR1 SA . 14
4.2.4.3 NR FR1 NSA . 14
4.2.5 Arrangements for test signals at the output of transmitters . 15
4.2.6 Arrangements for test signals at the input of receivers . 15
4.2.6.1 General . 15
4.2.6.2 Arrangements for test signals at the input of GSM receivers . 15
4.2.6.3 Arrangements for test signals at the input of UTRA and E-UTRA receivers . 15
4.2.6.4 Arrangements for test signals at the input of E-UTRA with LAA . 16
4.2.6.5 Arrangements for test signals at the input of E-UTRA with in band or guard band NB-IoT,
Standalone NB-IoT . 16
4.2.6.6 Arrangements for test signals at the input of NR receivers . 16
4.3 Exclusion bands . 16
4.3.1 GSM Transmitter exclusion band . 16
4.3.2 GSM Receiver exclusion band. 16
4.3.3 UTRA and E-UTRA Transmitter exclusion band . 16
4.3.3.1 UTRA . 16
4.3.3.2 E-UTRA . 16
4.3.4 UTRA and E-UTRA Receiver exclusion band . 17
4.3.5 NR SA and NSA Transmitter exclusion band. 17
4.3.6 NR SA and NSA Receiver exclusion band . 17
4.4 Narrow band responses of receivers and receivers of duplex transceivers . 17
4.4.1 GSM Narrow band responses on receivers . 17
4.4.2 UTRA and E-UTRA Narrow band responses on receivers. 18
4.4.2.1 UTRA . 18
4.4.2.2 E-UTRA . 18
4.4.3 NR Narrow band responses on receivers . 19
5 Ancillary equipment . 19
6 Performance criteria . 19
6.1 Performance criteria for Continuous phenomena . 19
6.1.1 GSM and voice call. 19
6.1.1.1 Performance criteria for Continuous phenomena applied to Transmitters (CT) . 19
6.1.1.2 Performance criteria for Continuous phenomena applied to Receivers (CR) . 19
6.1.2 UTRA . 20
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
6.1.3 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 20
6.1.4 NR . 20
6.2 Performance criteria for Transient phenomena . 20
7 Requirements . 20
7.1 General . 20
7.2 Emission . 21
7.2.1 General . 21
7.2.2 Special conditions . 21
7.3 Immunity . 21
7.3.1 General . 21
7.3.2 Special conditions . 22
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 23
Annex B (normative): Performance assessment voice call, Audio breakthrough . 25
B.1 Calibration of audio levels . 25
B.2 Measurement of audio levels . 26
Annex C (normative): Performance assessment of data transfer call, Error Ratios . 27
C.1 Calibration of data transfer . 27
C.1.1 UTRA . 27
C.1.2 E-UTRA and NR . 27
C.2 Assessment of data transfer . 27
C.2.1 UTRA, Derivation of Error Ratios . 27
C.2.2 E-UTRA and NR, Derivation of Throughput Percentages . 28
C.3 EUT without data application ancillary . 28
C.4 EUT with data application ancillary . 28
Annex D (informative): Change history . 30
History . 31
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the
ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive and associated
EFTA regulations.
The present document is part 52 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
1 Scope
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
Cellular Communication User Equipment (UE), including Customer Premise Equipment (CPE), Set Top Box (STB)
containing cellular communication technologies, and the associated ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC) for equipment utilizing the technologies in table 1.
Table 1: Technologies User Equipment (UE) radio and ancillary equipment Cellular Communication
Cellular Mobile Communication Technology
Standard Set ETSI Standard
Technology Generation
Global System for Mobile 2G/3G IMT-2000 SC single carrier ETSI EN 301 511 [i.9]
communications (GSM)
CDMA Multi-Carrier (cdma2000) 2G/3G IS-95/CDMA2000 - IMT-MC ETSI EN 301 908-4 [i.10]
multi carrier
CDMA Direct Spread (UTRA FDD) 3G IMT-2000 Direct Spread ETSI EN 301 908-2 [i.11]
Evolved Universal Terrestrial Radio 4G IMT-advanced ETSI EN 301 908-13 [i.12]
Access (E-UTRA)
New Radio (NR) 5G IMT-2020 ETSI TS 138 521-1 [15],
ETSI TS 138 521-3 [16]
Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port
of radio equipment and combinations of radio and associated ancillary equipment are not included in the present
document. Such technical specifications are normally found in the relevant product standards for the effective use of the
radio spectrum.
NOTE 1: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.2] is given in annex A.
NOTE 2: The present document does not cover the radio base stations as specified in ETSI EN 301 489-50 [i.13].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 134 108 (V15.2.0) (10-2019): "Universal Mobile Telecommunications System (UMTS);
LTE; Common test environments for User Equipment (UE); Conformance testing (3GPP
TS 34.108 version 15.2.0 Release 15)".
[3] ETSI TS 125 101 (V16.1.0) (11-2020): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 16.1.0
Release 16)".
ETSI
---------------------- Page: 7 ----------------------
8 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
[4] ETSI TS 134 109 (V16.0.0) (07-2020): "Universal Mobile Telecommunications System (UMTS);
Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109
version 16.0.0 Release 16)".
[5] ETSI EN 300 296-1 (V1.4.1) (08-2013): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily
for analogue speech; Part 1: Technical characteristics and methods of measurement".
[6] Recommendation ITU-T P.64 (06/2019): "Determination of sensitivity/frequency characteristics of
local telephone systems".
[7] Recommendation ITU-T P.76 (11/1988): "Determination of loudness ratings; fundamental
principles".
[8] ETSI TS 125 102 (V16.0.0) (08-2020): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 16.0.0
Release 16)".
[9] ETSI TS 136 101 (V14.18.0) (05-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) radio transmission and reception (3GPP TS 36.101
version 14.18.0 Release 14)".
[10] ETSI TS 136 508 (V16.8.0) (06-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE)
conformance testing (3GPP TS 36.508 version 16.8.0 Release 16)".
[11] ETSI TS 136 509 (V16.0.0) (05-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User
Equipment (UE) (3GPP TS 36.509 version 16.0.0 Release 16)".
[12] ETSI TS 136 521-1 (V16.8.1) (06-2021): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception;
Part 1: Conformance testing (3GPP TS 36.521-1 version 16.8.1 Release 16)".
[13] ETSI TS 138 508-1 (V16.7.0) (06-2021): "5G; 5GS; User Equipment (UE) conformance
specification; Part 1: Common test environment (3GPP TS 38.508-1 version 16.7.0 Release 16)".
[14] ETSI TS 138 101-1 (V16.7.0) (05-2021): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 1: Range 1 Standalone (3GPP TS 38.101-1 version 16.7.0 Release 16)".
[15] ETSI TS 138 521-1 (V16.6.0) (02-2021): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 1: Range 1 standalone (3GPP TS 38.521-1
version 16.6.0 Release 16)".
[16] ETSI TS 138 521-3 (V16.5.0) (11-2020): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 3: Range 1 and Range 2 Interworking
operation with other radios (3GPP TS 38.521-3 version 16.5.0 Release 16)".
[17] EN 55035:2017 + A11:2020: "Electromagnetic compatibility of multimedia equipment - Immunity
requirements" (produced by CENELEC).
[18] ETSI TS 100 910 (V8.20.0): "Digital cellular telecommunications system (Phase 2+); Radio
Transmission and Reception (3GPP TS 05.05 version 8.20.0 Release 1999)".
[19] Void.
ETSI
---------------------- Page: 8 ----------------------
9 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 121 905 (V15.1.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP
Specifications (3GPP TR 21.905 version 15.1.0 Release 15)".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI TR 125 990 (V3.0.0): "Universal Mobile Telecommunications System (UMTS); Vocabulary
(3G TR 25.990 version 3.0.0 Release 1999)".
[i.4] Commission Implementing Decision C (2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.5] ETSI GTS 05.08 (V3.8.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control (GSM 05.08)".
NOTE: The technical content of ETSI I-ETS 300 034-1 has been transferred into ETSI GTS 05.08 (V3.8.0).
[i.6] ETSI GTS 05.08-DCS (V3.0.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control; (GSM 05.08 - DCS-1800)".
NOTE: The technical content of ETSI I-ETS 300 034-2 has been transferred into ETSI GTS 05.08-DCS (V3.0.0).
[i.7] ETSI ETS 300 578 (Edition 13) (03-1999): "Digital cellular telecommunications system (Phase 2)
(GSM); Radio subsystem link control (GSM 05.08 version 4.22.1)".
[i.8] Void.
[i.9] ETSI EN 301 511 (V12.5.1) (03-2017): "Global System for Mobile communications (GSM);
Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU".
[i.10] ETSI EN 301 908-4 (V6.2.1) (06-2013): "IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier
(cdma2000) User Equipment (UE)".
[i.11] ETSI EN 301 908-2 (V11.1.2) (08-2017): "IMT cellular networks; Harmonised Standard covering
the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread
(UTRA FDD) User Equipment (UE)".
[i.12] ETSI EN 301 908-13 (V11.1.2) (07-2017): "IMT cellular networks; Harmonised Standard
covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved
Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)".
[i.13] ETSI EN 301 489-50 (V2.2.1) (04-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 50: Specific conditions for Cellular Communication Base
Station (BS), repeater and ancillary equipment; Harmonised Standard covering the essential
requirements of article 3.1(b) of Directive 2014/53/EU".
ETSI
---------------------- Page: 9 ----------------------
10 Final draft ETSI EN 301 489-52 V1.2.0 (2021-09)
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:
ancillary equipment: electrical or electronic equipment, that is intended to be used with a receiver or transmitter
NOTE 1: It is considered as an ancillar
...
Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication
User Equipment (UE) radio and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
Reference
DEN/ERM-EMC-354
Keywords
EMC, GSM, harmonised standard, LTE, MSR,
NR, OFDMA, WCDMA, WMAN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Test conditions . 12
4.1 General . 12
4.2 Arrangements for test signals . 12
4.2.0 General . 12
4.2.1 Arrangements for test signals for GSM . 12
4.2.2 Arrangements for test signals for UTRA and E-UTRA . 12
4.2.3 Arrangements for test signals for NR . 13
4.2.3.1 General for NR . 13
4.2.3.2 NR FR1 SA . 13
4.2.3.3 NR FR1 NSA . 14
4.2.4 Arrangements for test signals at the output of transmitters . 14
4.2.5 Arrangements for test signals at the input of receivers . 14
4.2.5.1 General . 14
4.2.5.2 Arrangements for test signals at the input of GSM receivers . 14
4.2.5.3 Arrangements for test signals at the input of UTRA and E-UTRA receivers . 15
4.2.5.4 Arrangements for test signals at the input of E-UTRA with LAA . 15
4.2.5.5 Arrangements for test signals at the input of NR receivers . 15
4.3 Exclusion bands . 15
4.3.1 GSM Transmitter exclusion band . 15
4.3.2 GSM Receiver exclusion band. 15
4.3.3 UTRA and E-UTRA Transmitter exclusion band . 16
4.3.3.1 UTRA . 16
4.3.3.2 E-UTRA . 16
4.3.4 UTRA and E-UTRA Receiver exclusion band . 16
4.3.5 NR SA and NSA Transmitter exclusion band. 16
4.3.6 NR SA and NSA Receiver exclusion band . 16
4.4 Narrow band responses of receivers and receivers of duplex transceivers . 16
4.4.1 GSM Narrow band responses on receivers . 16
4.4.2 UTRA and E-UTRA Narrow band responses on receivers. 17
4.4.2.1 UTRA . 17
4.4.2.2 E-UTRA . 17
4.4.3 NR Narrow band responses on receivers . 18
5 Ancillary equipment . 18
6 Performance criteria . 18
6.1 Performance criteria for Continuous phenomena . 18
6.1.1 GSM. 18
6.1.1.1 Performance criteria for Continuous phenomena applied to Transmitters (CT) . 18
6.1.1.2 Performance criteria for Continuous phenomena applied to Receivers (CR) . 18
6.1.2 UTRA . 19
6.1.3 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 19
6.1.4 NR . 19
6.2 Performance criteria for Transient phenomena . 19
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
7 Requirements . 19
7.1 General . 19
7.2 Emission . 20
7.2.1 General . 20
7.2.2 Special conditions . 20
7.3 Immunity . 20
7.3.1 General . 20
7.3.2 Special conditions . 21
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 22
Annex B (normative): Performance assessment voice call, Audio breakthrough . 24
B.1 Calibration of audio levels . 24
B.2 Measurement of audio levels . 25
Annex C (normative): Performance assessment of data transfer call, Error Ratios . 26
C.1 Calibration of data transfer . 26
C.1.1 UTRA . 26
C.1.2 E-UTRA and NR . 26
C.2 Assessment of data transfer . 26
C.2.1 UTRA, Derivation of Error Ratios . 26
C.2.2 E-UTRA and NR, Derivation of Throughput Percentages . 27
C.3 EUT without data application ancillary . 27
C.4 EUT with data application ancillary . 27
Annex D (informative): Change history . 29
History . 30
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 52 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
1 Scope
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
Cellular Communication User Equipment (UE), including Customer Premise Equipment (CPE), Set Top Box (STB)
containing cellular communication technologies, and the associated ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC) for equipment utilizing the technologies in table 1.
Table 1: Technologies User Equipment (UE) radio and ancillary equipment Cellular Communication
Cellular Mobile Communication Technology
Standard Set ETSI Standard
Technology Generation
Global System for Mobile IMT-2000 SC single
2G/3G ETSI EN 301 511 [i.9]
communications (GSM) carrier
IS-95/CDMA2000 -
CDMA Multi-Carrier (cdma2000) 2G/3G ETSI EN 301 908-4 [i.10]
IMT-MC multi carrier
CDMA Direct Spread (UTRA FDD) 3G IMT-2000 Direct Spread ETSI EN 301 908-2 [i.11]
Evolved Universal Terrestrial Radio
4G IMT-advanced ETSI EN 301 908-13 [i.12]
Access (E-UTRA)
ETSI TS 138 521-1 [15],
New Radio (NR) 5G IMT-2020
ETSI TS 138 521-3 [16]
Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port
of radio equipment and combinations of radio and associated ancillary equipment are not included in the present
document. Such technical specifications are normally found in the relevant product standards for the effective use of the
radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE 1: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.2] is given in annex A.
NOTE 2: The present document does not cover the radio base stations as specified in ETSI EN 301 489-50 [i.13].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 134 108 (V15.2.0) (10-2019): "Universal Mobile Telecommunications System (UMTS);
LTE; Common test environments for User Equipment (UE); Conformance testing (3GPP
TS 34.108 version 15.2.0 Release 15)".
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
[3] ETSI TS 125 101 (V15.3.0) (05-2019): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 15.3.0
Release 15)".
[4] ETSI TS 134 109 (V15.0.0) (07-2018): "Universal Mobile Telecommunications System (UMTS);
Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109
version 15.0.0 Release 15)".
[5] ETSI EN 300 296-1 (V1.4.1) (08-2013): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily
for analogue speech; Part 1: Technical characteristics and methods of measurement".
[6] Recommendation ITU-T P.64 (2019): "Determination of sensitivity/frequency characteristics of
local telephone systems".
[7] Recommendation ITU-T P.76 (1988): "Determination of loudness ratings; fundamental
principles".
[8] ETSI TS 125 102 (V15.0.0) (10-2018): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 15.0.0
Release 15)".
[9] ETSI TS 136 101 (V15.10.0) (04-2020): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) radio transmission and reception (3GPP TS 36.101
version 15.10.0 Release 15)".
[10] ETSI TS 136 508 (V15.6.0) (04-2020): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE)
conformance testing (3GPP TS 36.508 version 15.6.0 Release 15)".
[11] ETSI TS 136 509 (V15.3.0) (01-2020): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User
Equipment (UE) (3GPP TS 36.509 version 15.3.0 Release 15)".
[12] ETSI TS 136 521-1 (V15.5.0) (07-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception;
Part 1: Conformance testing (3GPP TS 36.521-1 version 15.5.0 Release 15)".
[13] ETSI TS 138 508-1 (V15.4.0) (07-2019): "5G; 5GS; User Equipment (UE) conformance
specification; Part 1: Common test environment (3GPP TS 38.508-1 version 15.4.0 Release 15)".
[14] ETSI TS 138 101-1 (V15.9.0) (04-2020): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 1: Range 1 Standalone (3GPP TS 38.101-1 version 15.9.0 Release 15)".
[15] ETSI TS 138 521-1 (V15.3.0) (07-2019): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 1: Range 1 standalone (3GPP TS 38.521-1
version 15.3.0 Release 15)".
[16] ETSI TS 138 521-3 (V15.4.1) (05-2020): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 3: Range 1 and Range 2 Interworking
operation with other radios (3GPP TS 38.521-3 version 15.4.1 Release 15)".
[17] CISPR 16-1-4:2019 + AMD1:2020: "Specification for radio disturbance and immunity measuring
apparatus and methods -Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas
and test sites for radiated disturbance measurements".
[18] CISPR 32:2015 + AMD1:2019: "Electromagnetic compatibility of multimedia equipment -
Emission requirements".
[19] EN 55035:2017: "Electromagnetic compatibility of multimedia equipment - Immunity
requirements" (produced by CENELEC).
[20] ETSI TS 100 910 (V8.20.0): "Digital cellular telecommunications system (Phase 2+); Radio
Transmission and Reception (3GPP TS 05.05 version 8.20.0 Release 1999)".
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
[21] EN 61000-3-3:2013/A1:2019: "Electromagnetic compatibility (EMC) - Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional
connection" (produced by CENELEC).
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 121 905 (V15.1.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP
Specifications (3GPP TR 21.905 version 15.1.0 Release 15)".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI TR 125 990 (V3.0.0): "Universal Mobile Telecommunications System (UMTS); Vocabulary
(3G TR 25.990 version 3.0.0 Release 1999)".
[i.4] Commission Implementing Decision C (2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.5] ETSI GTS 05.08 (V3.8.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control (GSM 05.08)".
NOTE: The technical content of ETSI I-ETS 300 034-1 has been transferred into ETSI GTS 05.08 (V3.8.0).
[i.6] ETSI GTS 05.08-DCS (V3.0.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control; (GSM 05.08 - DCS-1800)".
NOTE: The technical content of ETSI I-ETS 300 034-2 has been transferred into ETSI GTS 05.08-DCS (V3.0.0).
[i.7] ETSI ETS 300 578 (Edition 13) (03-1999): "Digital cellular telecommunications system (Phase 2)
(GSM); Radio subsystem link control (GSM 05.08 version 4.22.0)".
[i.8] Void.
[i.9] ETSI EN 301 511 (V12.5.1) (03-2017): "Global System for Mobile communications (GSM);
Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU".
[i.10] ETSI EN 301 908-4 (V6.2.1) (06-2013): "IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier
(cdma2000) User Equipment (UE)".
[i.11] ETSI EN 301 908-2 (V11.1.2) (08-2017): "IMT cellular networks; Harmonised Standard covering
the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread
(UTRA FDD) User Equipment (UE)".
[i.12] ETSI EN 301 908-13 (V11.1.2) (07-2017): "IMT cellular networks; Harmonised Standard
covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved
Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)".
ETSI
---------------------- Page: 8 ----------------------
9 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
[i.13] ETSI EN 301 489-50 (V2.2.1) (04-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 50: Specific conditions for Cellular Communication Base
Station (BS), repeater and ancillary equipment; Harmonised Standard covering the essential
requirements of article 3.1(b) of Directive 2014/53/EU".
3 Definition of terms, symbols and abbreviations
3.1 Terms
For the purposes of the present document, the terms given in ETSI EN 301 489-1 [1] and the following apply:
ancillary equipment: electrical or electronic equipment, that is intended to be used with a receiver or transmitter
NOTE 1: It is considered as an ancillary equipment if:
the equipment is intended for use with a receiver or transmitter to provide additional operational
and/or control features to the radio equipment, (e.g. to extend control to another position or
location); and
the ancillary equipment cannot be used without being connected to radio equipment to provide user
functions independently of a receiver or transmitter; and
the receiver or transmitter, to which it is connected, is capable of providing some intended
operation such as transmitting and/or receiving without the ancillary equipment (i.e. it is not a sub-
unit of the main equipment essential to the main equipment basic functions).
NOTE 2: An example of ancillary equipment would be a docking station for radio equipment whose interface is
dedicated to a particular product or range of pr
...
Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
HARMONISED EUROPEAN STANDARD
Electromagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication
Mobile and portable (UE) radio and ancillary equipment;
Harmonised Standard covering the essential requirements
of article 3.1(b) of Directive 2014/53/EU
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
Reference
DEN/ERM-EMC-354
Keywords
EMC, GSM, Harmonised standard, LTE, MSR,
OFDMA, WCDMA, WMAN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions and abbreviations . 9
3.1 Definitions . 9
3.2 Abbreviations . 10
4 Test conditions . 11
4.1 General . 11
4.2 Arrangements for test signals . 11
4.2.1 Arrangements for test signals for GSM and DCS . 11
4.2.1.1 General for GSM and DCS . 11
4.2.1.2 GSM and DCS Arrangements for establishing a communications link . 11
4.2.1.3 GSM and DCS Calibration of the overall audio link performance . 11
4.2.1.4 GSM and DCS Measurement of the audio level at the speech output of the EUT . 13
4.2.2 Arrangements for test signals for CDMA Direct Spread (UTRA and E-UTRA) . 13
4.2.3 Arrangements for test signals at the input of transmitters . 14
4.2.4 Arrangements for test signals at the output of transmitters . 14
4.2.5 Arrangements for test signals at the input of receivers . 15
4.2.5.1 General . 15
4.2.5.2 Arrangements for test signals at the input of GSM and DCS receivers . 15
4.2.5.3 Arrangements for test signals at the input of CDMA Direct Spread (UTRA and E-UTRA)
receivers . 15
4.2.6 Arrangements for test signals at the output of receivers . 15
4.2.6.1 Arrangements for test signals at the output of GSM and DCS receivers . 15
4.2.6.2 Arrangements for test signals at the output of CDMA Direct Spread (UTRA and E-UTRA)
receivers . 15
4.3 Exclusion bands . 15
4.3.1 GSM and DCS Receiver and receivers of duplex transceivers exclusion band . 15
4.3.2 GSM and DCS Transmitter exclusion band . 16
4.3.3 CDMA Direct Spread (UTRA and E-UTRA) Transmitter exclusion band . 16
4.3.3.1 UTRA . 16
4.3.3.2 E-UTRA . 16
4.3.4 CDMA Direct Spread (UTRA and E-UTRA) Receiver exclusion band . 16
4.4 Narrow band responses of receivers and receivers of duplex transceivers . 16
4.4.1 GSM and DCS Narrow band responses of receivers and receivers of duplex transceivers . 16
4.4.2 CDMA Direct Spread (UTRA and E-UTRA) Narrow band responses on receivers . 17
4.4.2.1 UTRA . 17
4.4.2.2 E-UTRA . 17
4.5 Normal test modulation . 18
4.5.1 GSM and DCS Normal test modulation . 18
4.5.2 CDMA Direct Spread (UTRA and E-UTRA) Normal test modulation . 18
5 Performance assessment . 18
5.1 General . 18
5.2 Equipment which can provide a continuous communications link . 18
5.2.1 GSM and DCS Equipment with analogue speech circuits . 18
5.2.2 GSM and DCS Equipment without analogue speech circuits . 18
5.3 Equipment which does not provide a continuous communications link . 18
5.4 Ancillary equipment . 19
5.4.1 GSM and DCS Ancillary equipment . 19
5.4.2 CDMA Direct Spread (UTRA and E-UTRA) Ancillary equipment . 19
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
5.5 Equipment classification . 19
6 Performance criteria . 19
6.1 GSM and DCS Performance Criteria . 19
6.1.1 General . 19
6.1.2 Performance criteria for Continuous phenomena applied to Transmitters (CT) . 20
6.1.3 Performance criteria for Transient phenomena applied to Transmitters (TT) . 20
6.1.4 Performance criteria for Continuous phenomena applied to Receivers (CR) . 20
6.1.5 Performance criteria for Transient phenomena applied to Receivers (TR) . 20
6.1.6 Performance criteria for ancillary equipment tested on a stand alone basis . 21
6.2 CDMA Direct Spread (UTRA and E-UTRA) Performance Criteria . 21
6.2.1 General . 21
6.2.2 Performance criteria for continuous phenomena . 21
6.2.2.1 General . 21
6.2.2.2 UTRA . 21
6.2.2.3 E-UTRA . 21
6.2.3 Performance criteria for Transient phenomena . 22
7 Applicability overview . 22
7.1 GSM and DCS Applicability overview . 22
7.1.1 Emission . 22
7.1.1.1 General . 22
7.1.1.2 Special conditions . 22
7.1.2 Immunity . 22
7.1.2.1 General . 22
7.1.2.2 Special conditions . 23
7.2 CDMA Direct Spread (UTRA and E-UTRA) Applicability overview tables . 23
7.2.1 Emission . 23
7.2.1.1 General . 23
7.2.1.2 Special conditions . 23
7.2.2 Immunity . 23
7.2.2.1 General . 23
7.2.2.2 Special conditions . 24
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 25
Annex B (normative): CDMA Direct Spread Performance assessment voice call. Audio
breakthrough . 27
B.1 Calibration of audio levels . 27
B.2 Measurement of audio levels . 28
Annex C (normative): CDMA Direct Spread Performance assessment of data transfer call.
Error Ratios . 29
C.1 Calibration of data transfer . 29
C.1.1 UTRA . 29
C.1.2 E-UTRA . 29
C.2 Assessment of data transfer . 29
C.2.1 UTRA. Derivation of Error Ratios . 29
C.2.2 E-UTRA. Derivation of Throughput Percentages . 30
C.3 EUT without data application ancillary . 30
C.4 EUT with data application ancillary . 31
Annex D (informative): Examples of cellular mobile and portable radio and ancillary
equipment for digital cellular radio telecommunications systems
within the scope of the present document . 32
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
D.1 Mobile and portable radio equipment, and ancillary equipment meeting Phase 1, Phase 2, and
Phase 2+ requirements of GSM 450 MHz, 900 MHz or DCS 1 800 MHz digital cellular
telecommunications system . 32
D.2 Mobile and portable radio equipment, and ancillary equipment for the IMT-2000 CDMA Direct
Spread (UTRA) . 32
D.3 Mobile and portable radio equipment, and ancillary equipment for the Evolved Universal
Terrestrial Radio Access (E-UTRA) . 33
Annex E (informative): Change History . 34
History . 35
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 52 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
1 Scope
The present document specifies technical characteristics and methods of measurements for equipment the following
equipment types:
1) digital cellular User Equipment (UE);
2) associated ancillary equipment.
Including individually and combinations of:
• UTRA, WCDMA (IMT-2000 Direct Spread, W-CDMA, UMTS)
• E-UTRA, LTE (IMT-2000 and IMT advanced) (see annex D)
• GSM (IMT-2000 SC, Technology GSM/EDGE) (see annex D)
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and ETSI EN 301 489-1 [1], the provisions of the present document take precedence.
Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment are not
included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
Base station (BS) equipment operating within network infrastructure is outside the scope of the present document.
However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed
location while connected to the AC mains (see clause 5.5).
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU under the conditions
identified in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.1.1) (11-2016): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements: Harmonised Standard
covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU and Harmonised
Standard covering the essential requirements of article 6 of the Directive 2014/30/EU".
[2] ETSI TS 134 108 (V6.4.0) (10-2006): "Universal Mobile Telecommunications System (UMTS);
Common test environments for User Equipment (UE); Conformance testing (3GPP TS 34.108
version 6.4.0 Release 6)".
[3] ETSI TS 125 101(V7.5.0) (10-2006): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 7.5.0
Release 7)".
ETSI
---------------------- Page: 7 ----------------------
8 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
[4] ETSI TS 134 109 (V6.2.0) (09-2006): "Universal Mobile Telecommunications System (UMTS);
Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109
version 6.2.0 Release 6)".
[5] ETSI EN 300 296-1 (V1.4.1) (2013): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for
analogue speech; Part 1: Technical characteristics and methods of measurement".
[6] Recommendation ITU-T P.64 (1999): "Determination of sensitivity/frequency characteristics of
local telephone systems".
[7] Recommendation ITU-T P.76 (1988): "Determination of loudness ratings; fundamental
principles".
[8] ETSI TS 125 102 (V7.4.0) (10-2006): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 7.4.0
Release 7)".
[9] ETSI TS 136 101 (V8.4.0) (01-2009): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) radio transmission and reception (3GPP TS 36.101
version 8.4.0 Release 8)".
[10] ETSI TS 136 508 (V8.1.0) (04-2009): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE)
conformance testing (3GPP TS 36.508 version 8.1.0 Release 8)".
[11] ETSI TS 136 509 (V8.0.1) (01-2009): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Special conformance testing function for User Equipment (UE) (3GPP TS 36.509
version 8.0.1 Release 8)".
[12] ETSI I-ETS 300 034-1 (Edition 1) (10-1993): "European digital cellular telecommunications
system (Phase 1); Radio subsystem link control (GSM 05.08)".
[13] ETSI I-ETS 300 034-2 (Edition 1) (09-1993): "European digital cellular telecommunications
system (Phase 1); Radio subsystem link control; Part 2: DCS extension (GSM 05.08-DCS)".
[14] ETSI ETS 300 578 (Edition 13) (03-1999): "Digital cellular telecommunications system (Phase 2)
(GSM); Radio subsystem link control (GSM 05.08 V4.22.0)".
[15] ETSI TS 100 911 (V8.23.0) (11-2005): "Digital cellular telecommunications system (Phase 2+);
Radio subsystem link control (3GPP TS 05.08 version 8.23.0 Release 1999)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 121 905 (V8.7.0): "Digital cellular telecommunications system (Phase 2+); Universal
Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP Specifications
(3GPP TR 21.905 version 8.7.0 Release 8)".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI TR 125 990 (V3.0.0): "Universal Mobile Telecommunications System (UMTS); Vocabulary
(3G TR 25.990 version 3.0.0 Release 1999)".
ETSI
---------------------- Page: 8 ----------------------
9 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
[i.4] Commission Implementing Decision C(2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI EN 301 489-1 [1] and the following
apply:
bearer: information transmission path of defined characteristics for transfer of user data or predefined test data
camped on a cell: UE is in idle mode and has completed the cell selection/reselection process and has chosen a cell
NOTE 1: The UE monitors system information and (in most cases) paging information.
NOTE 2: The services may be limited, and the PLMN may not be aware of the existence of the UE within the
chosen cell.
channel bandwidth: RF bandwidth supporting a single E-UTRA RF carrier with the transmission bandwidth
configured in the uplink or downlink of a cell
NOTE: The channel bandwidth is measured in MHz and is used as a reference for transmitter and receiver RF
requirements.
data application ancillary: ancillary which provides send and/or receive data
...
SLOVENSKI STANDARD
oSIST prEN 301 489-52 V1.1.2:2021
01-februar-2021
Standard elektromagnetne združljivosti (EMC) za radijsko opremo in storitve - 52.
del: Posebni pogoji za celično komunikacijsko uporabniško (UE) radijsko in
pomožno opremo - Harmonizirani standard za elektromagnetno združljivost
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part
52: Specific conditions for Cellular Communication User Equipment (UE) radio and
ancillary equipment - Harmonised Standard for ElectroMagnetic Compatibility
Ta slovenski standard je istoveten z: ETSI EN 301 489-52 V1.1.2 (2020-12)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN 301 489-52 V1.1.2:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
---------------------- Page: 2 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
HARMONISED EUROPEAN STANDARD
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication
User Equipment (UE) radio and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility
---------------------- Page: 3 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
2 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
Reference
DEN/ERM-EMC-354
Keywords
EMC, GSM, harmonised standard, LTE, MSR,
NR, OFDMA, WCDMA, WMAN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2020.
All rights reserved.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.
3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
3 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 8
3 Definition of terms, symbols and abbreviations . 9
3.1 Terms . 9
3.2 Symbols . 10
3.3 Abbreviations . 11
4 Test conditions . 12
4.1 General . 12
4.2 Arrangements for test signals . 12
4.2.0 General . 12
4.2.1 Arrangements for test signals for GSM . 12
4.2.2 Arrangements for test signals for UTRA and E-UTRA . 12
4.2.3 Arrangements for test signals for NR . 13
4.2.3.1 General for NR . 13
4.2.3.2 NR FR1 SA . 13
4.2.3.3 NR FR1 NSA . 14
4.2.4 Arrangements for test signals at the output of transmitters . 14
4.2.5 Arrangements for test signals at the input of receivers . 14
4.2.5.1 General . 14
4.2.5.2 Arrangements for test signals at the input of GSM receivers . 14
4.2.5.3 Arrangements for test signals at the input of UTRA and E-UTRA receivers . 15
4.2.5.4 Arrangements for test signals at the input of E-UTRA with LAA . 15
4.2.5.5 Arrangements for test signals at the input of NR receivers . 15
4.3 Exclusion bands . 15
4.3.1 GSM Transmitter exclusion band . 15
4.3.2 GSM Receiver exclusion band. 15
4.3.3 UTRA and E-UTRA Transmitter exclusion band . 16
4.3.3.1 UTRA . 16
4.3.3.2 E-UTRA . 16
4.3.4 UTRA and E-UTRA Receiver exclusion band . 16
4.3.5 NR SA and NSA Transmitter exclusion band. 16
4.3.6 NR SA and NSA Receiver exclusion band . 16
4.4 Narrow band responses of receivers and receivers of duplex transceivers . 16
4.4.1 GSM Narrow band responses on receivers . 16
4.4.2 UTRA and E-UTRA Narrow band responses on receivers. 17
4.4.2.1 UTRA . 17
4.4.2.2 E-UTRA . 17
4.4.3 NR Narrow band responses on receivers . 18
5 Ancillary equipment . 18
6 Performance criteria . 18
6.1 Performance criteria for Continuous phenomena . 18
6.1.1 GSM. 18
6.1.1.1 Performance criteria for Continuous phenomena applied to Transmitters (CT) . 18
6.1.1.2 Performance criteria for Continuous phenomena applied to Receivers (CR) . 18
6.1.2 UTRA . 19
6.1.3 E-UTRA, E-UTRA with LAA, inband or guard band NB-IoT, Standalone NB-IoT . 19
6.1.4 NR . 19
6.2 Performance criteria for Transient phenomena . 19
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
4 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
7 Requirements . 19
7.1 General . 19
7.2 Emission . 20
7.2.1 General . 20
7.2.2 Special conditions . 20
7.3 Immunity . 20
7.3.1 General . 20
7.3.2 Special conditions . 21
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 22
Annex B (normative): Performance assessment voice call, Audio breakthrough . 24
B.1 Calibration of audio levels . 24
B.2 Measurement of audio levels . 25
Annex C (normative): Performance assessment of data transfer call, Error Ratios . 26
C.1 Calibration of data transfer . 26
C.1.1 UTRA . 26
C.1.2 E-UTRA and NR . 26
C.2 Assessment of data transfer . 26
C.2.1 UTRA, Derivation of Error Ratios . 26
C.2.2 E-UTRA and NR, Derivation of Throughput Percentages . 27
C.3 EUT without data application ancillary . 27
C.4 EUT with data application ancillary . 27
Annex D (informative): Change history . 29
History . 30
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
5 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 52 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
6 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
1 Scope
The present document specifies the applicable test conditions, performance assessment, and performance criteria for
Cellular Communication User Equipment (UE), including Customer Premise Equipment (CPE), Set Top Box (STB)
containing cellular communication technologies, and the associated ancillary equipment in respect of ElectroMagnetic
Compatibility (EMC) for equipment utilizing the technologies in table 1.
Table 1: Technologies User Equipment (UE) radio and ancillary equipment Cellular Communication
Cellular Mobile Communication Technology
Standard Set ETSI Standard
Technology Generation
Global System for Mobile IMT-2000 SC single
2G/3G ETSI EN 301 511 [i.9]
communications (GSM) carrier
IS-95/CDMA2000 -
CDMA Multi-Carrier (cdma2000) 2G/3G ETSI EN 301 908-4 [i.10]
IMT-MC multi carrier
CDMA Direct Spread (UTRA FDD) 3G IMT-2000 Direct Spread ETSI EN 301 908-2 [i.11]
Evolved Universal Terrestrial Radio
4G IMT-advanced ETSI EN 301 908-13 [i.12]
Access (E-UTRA)
ETSI TS 138 521-1 [15],
New Radio (NR) 5G IMT-2020
ETSI TS 138 521-3 [16]
Technical specifications related to the antenna port of radio equipment and radiated emissions from the enclosure port
of radio equipment and combinations of radio and associated ancillary equipment are not included in the present
document. Such technical specifications are normally found in the relevant product standards for the effective use of the
radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
NOTE 1: The relationship between the present document and essential requirements of article 3.1(b) of Directive
2014/53/EU [i.2] is given in annex A.
NOTE 2: The present document does not cover the radio base stations as specified in ETSI EN 301 489-50 [i.13].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.2.3) (11-2019): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for
ElectroMagnetic Compatibility".
[2] ETSI TS 134 108 (V15.2.0) (10-2019): "Universal Mobile Telecommunications System (UMTS);
LTE; Common test environments for User Equipment (UE); Conformance testing (3GPP
TS 34.108 version 15.2.0 Release 15)".
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
7 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
[3] ETSI TS 125 101 (V15.3.0) (05-2019): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 15.3.0
Release 15)".
[4] ETSI TS 134 109 (V15.0.0) (07-2018): "Universal Mobile Telecommunications System (UMTS);
Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109
version 15.0.0 Release 15)".
[5] ETSI EN 300 296-1 (V1.4.1) (08-2013): "Electromagnetic compatibility and Radio spectrum
Matters (ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily
for analogue speech; Part 1: Technical characteristics and methods of measurement".
[6] Recommendation ITU-T P.64 (2019): "Determination of sensitivity/frequency characteristics of
local telephone systems".
[7] Recommendation ITU-T P.76 (1988): "Determination of loudness ratings; fundamental
principles".
[8] ETSI TS 125 102 (V15.0.0) (10-2018): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 15.0.0
Release 15)".
[9] ETSI TS 136 101 (V15.10.0) (04-2020): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) radio transmission and reception (3GPP TS 36.101
version 15.10.0 Release 15)".
[10] ETSI TS 136 508 (V15.6.0) (04-2020): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE)
conformance testing (3GPP TS 36.508 version 15.6.0 Release 15)".
[11] ETSI TS 136 509 (V15.3.0) (01-2020): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Special conformance testing functions for User
Equipment (UE) (3GPP TS 36.509 version 15.3.0 Release 15)".
[12] ETSI TS 136 521-1 (V15.5.0) (07-2019): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception;
Part 1: Conformance testing (3GPP TS 36.521-1 version 15.5.0 Release 15)".
[13] ETSI TS 138 508-1 (V15.4.0) (07-2019): "5G; 5GS; User Equipment (UE) conformance
specification; Part 1: Common test environment (3GPP TS 38.508-1 version 15.4.0 Release 15)".
[14] ETSI TS 138 101-1 (V15.9.0) (04-2020): "5G; NR; User Equipment (UE) radio transmission and
reception; Part 1: Range 1 Standalone (3GPP TS 38.101-1 version 15.9.0 Release 15)".
[15] ETSI TS 138 521-1 (V15.3.0) (07-2019): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 1: Range 1 standalone (3GPP TS 38.521-1
version 15.3.0 Release 15)".
[16] ETSI TS 138 521-3 (V15.4.1) (05-2020): "5G; NR; User Equipment (UE) conformance
specification; Radio transmission and reception; Part 3: Range 1 and Range 2 Interworking
operation with other radios (3GPP TS 38.521-3 version 15.4.1 Release 15)".
[17] CISPR 16-1-4:2019 + AMD1:2020: "Specification for radio disturbance and immunity measuring
apparatus and methods -Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas
and test sites for radiated disturbance measurements".
[18] CISPR 32:2015 + AMD1:2019: "Electromagnetic compatibility of multimedia equipment -
Emission requirements".
[19] EN 55035:2017: "Electromagnetic compatibility of multimedia equipment - Immunity
requirements" (produced by CENELEC).
[20] ETSI TS 100 910 (V8.20.0): "Digital cellular telecommunications system (Phase 2+); Radio
Transmission and Reception (3GPP TS 05.05 version 8.20.0 Release 1999)".
ETSI
---------------------- Page: 9 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
8 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
[21] EN 61000-3-3:2013/A1:2019: "Electromagnetic compatibility (EMC) - Part 3-3: Limits -
Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply
systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional
connection" (produced by CENELEC).
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 121 905 (V15.1.0): "Digital cellular telecommunications system (Phase 2+) (GSM);
Universal Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP
Specifications (3GPP TR 21.905 version 15.1.0 Release 15)".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI TR 125 990 (V3.0.0): "Universal Mobile Telecommunications System (UMTS); Vocabulary
(3G TR 25.990 version 3.0.0 Release 1999)".
[i.4] Commission Implementing Decision C (2015) 5376 final of 4.8.2015 on a standardisation request
to the European Committee for Electrotechnical Standardisation and to the European
Telecommunications Standards Institute as regards radio equipment in support of Directive
2014/53/EU of the European Parliament and of the Council.
[i.5] ETSI GTS 05.08 (V3.8.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control (GSM 05.08)".
NOTE: The technical content of ETSI I-ETS 300 034-1 has been transferred into ETSI GTS 05.08 (V3.8.0).
[i.6] ETSI GTS 05.08-DCS (V3.0.0) (01-1995): "European digital cellular telecommunications system
(Phase 1); Radio Subsystem Link Control; (GSM 05.08 - DCS-1800)".
NOTE: The technical content of ETSI I-ETS 300 034-2 has been transferred into ETSI GTS 05.08-DCS (V3.0.0).
[i.7] ETSI ETS 300 578 (Edition 13) (03-1999): "Digital cellular telecommunications system (Phase 2)
(GSM); Radio subsystem link control (GSM 05.08 version 4.22.0)".
[i.8] Void.
[i.9] ETSI EN 301 511 (V12.5.1) (03-2017): "Global System for Mobile communications (GSM);
Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU".
[i.10] ETSI EN 301 908-4 (V6.2.1) (06-2013): "IMT cellular networks; Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier
(cdma2000) User Equipment (UE)".
[i.11] ETSI EN 301 908-2 (V11.1.2) (08-2017): "IMT cellular networks; Harmonised Standard covering
the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread
(UTRA FDD) User Equipment (UE)".
[i.12] ETSI EN 301 908-13 (V11.1.2) (07-2017): "IMT cellular networks; Harmonised Standard
covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved
Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)".
ETSI
---------------------- Page: 10 ----------------------
oSIST prEN 301 489-52 V1.1.2:2021
9 Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
[i.13] ETSI EN 301 489-50 (V2.2.1) (04-2019): "ElectroMagnetic Compatibility (EMC
...
SLOVENSKI STANDARD
oSIST prEN 301 489-52 V1.1.0:2017
01-februar-2017
6WDQGDUGHOHNWURPDJQHWQH]GUXåOMLYRVWL (0& ]DUDGLMVNRRSUHPRLQVWRULWYH
GHO 3RVHEQLSRJRML]DFHOLþQRNRPXQLNDFLMVNRPRELOQRLQSUHQRVQR 8( UDGLMVNR
LQSRPRåQRRSUHPR+DUPRQL]LUDQLVWDQGDUGNL]DMHPDELVWYHQH]DKWHYHþOHQD
EGLUHNWLYH(8
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part
52: Specific conditions for Cellular Communication Mobile and portable (UE) radio and
ancillary equipment - Harmonised Standard covering the essential requirements of article
3.1b of Directive 2014/53/EU
Ta slovenski standard je istoveten z: ETSI EN 301 489-52 V1.1.0 (2016-11)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
oSIST prEN 301 489-52 V1.1.0:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
---------------------- Page: 2 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
HARMONISED EUROPEAN STANDARD
Electromagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication
Mobile and portable (UE) radio and ancillary equipment;
Harmonised Standard covering the essential requirements
of article 3.1(b) of Directive 2014/53/EU
---------------------- Page: 3 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
2 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
Reference
DEN/ERM-EMC-354
Keywords
EMC, GSM, Harmonised standard, LTE, MSR,
OFDMA, WCDMA, WMAN
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
3 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
Contents
Intellectual Property Rights . 6
Foreword . 6
Modal verbs terminology . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 8
3 Definitions and abbreviations . 9
3.1 Definitions . 9
3.2 Abbreviations . 10
4 Test conditions . 11
4.1 General . 11
4.2 Arrangements for test signals . 11
4.2.1 Arrangements for test signals for GSM and DCS . 11
4.2.1.1 General for GSM and DCS . 11
4.2.1.2 GSM and DCS Arrangements for establishing a communications link . 11
4.2.1.3 GSM and DCS Calibration of the overall audio link performance . 11
4.2.1.4 GSM and DCS Measurement of the audio level at the speech output of the EUT . 13
4.2.2 Arrangements for test signals for CDMA Direct Spread (UTRA and E-UTRA) . 13
4.2.3 Arrangements for test signals at the input of transmitters . 14
4.2.4 Arrangements for test signals at the output of transmitters . 14
4.2.5 Arrangements for test signals at the input of receivers . 15
4.2.5.1 General . 15
4.2.5.2 Arrangements for test signals at the input of GSM and DCS receivers . 15
4.2.5.3 Arrangements for test signals at the input of CDMA Direct Spread (UTRA and E-UTRA)
receivers . 15
4.2.6 Arrangements for test signals at the output of receivers . 15
4.2.6.1 Arrangements for test signals at the output of GSM and DCS receivers . 15
4.2.6.2 Arrangements for test signals at the output of CDMA Direct Spread (UTRA and E-UTRA)
receivers . 15
4.3 Exclusion bands . 15
4.3.1 GSM and DCS Receiver and receivers of duplex transceivers exclusion band . 15
4.3.2 GSM and DCS Transmitter exclusion band . 16
4.3.3 CDMA Direct Spread (UTRA and E-UTRA) Transmitter exclusion band . 16
4.3.3.1 UTRA . 16
4.3.3.2 E-UTRA . 16
4.3.4 CDMA Direct Spread (UTRA and E-UTRA) Receiver exclusion band . 16
4.4 Narrow band responses of receivers and receivers of duplex transceivers . 16
4.4.1 GSM and DCS Narrow band responses of receivers and receivers of duplex transceivers . 16
4.4.2 CDMA Direct Spread (UTRA and E-UTRA) Narrow band responses on receivers . 17
4.4.2.1 UTRA . 17
4.4.2.2 E-UTRA . 17
4.5 Normal test modulation . 18
4.5.1 GSM and DCS Normal test modulation . 18
4.5.2 CDMA Direct Spread (UTRA and E-UTRA) Normal test modulation . 18
5 Performance assessment . 18
5.1 General . 18
5.2 Equipment which can provide a continuous communications link . 18
5.2.1 GSM and DCS Equipment with analogue speech circuits . 18
5.2.2 GSM and DCS Equipment without analogue speech circuits . 18
5.3 Equipment which does not provide a continuous communications link . 18
5.4 Ancillary equipment . 19
5.4.1 GSM and DCS Ancillary equipment . 19
5.4.2 CDMA Direct Spread (UTRA and E-UTRA) Ancillary equipment . 19
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
4 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
5.5 Equipment classification . 19
6 Performance criteria . 19
6.1 GSM and DCS Performance Criteria . 19
6.1.1 General . 19
6.1.2 Performance criteria for Continuous phenomena applied to Transmitters (CT) . 20
6.1.3 Performance criteria for Transient phenomena applied to Transmitters (TT) . 20
6.1.4 Performance criteria for Continuous phenomena applied to Receivers (CR) . 20
6.1.5 Performance criteria for Transient phenomena applied to Receivers (TR) . 20
6.1.6 Performance criteria for ancillary equipment tested on a stand alone basis . 21
6.2 CDMA Direct Spread (UTRA and E-UTRA) Performance Criteria . 21
6.2.1 General . 21
6.2.2 Performance criteria for continuous phenomena . 21
6.2.2.1 General . 21
6.2.2.2 UTRA . 21
6.2.2.3 E-UTRA . 21
6.2.3 Performance criteria for Transient phenomena . 22
7 Applicability overview . 22
7.1 GSM and DCS Applicability overview . 22
7.1.1 Emission . 22
7.1.1.1 General . 22
7.1.1.2 Special conditions . 22
7.1.2 Immunity . 22
7.1.2.1 General . 22
7.1.2.2 Special conditions . 23
7.2 CDMA Direct Spread (UTRA and E-UTRA) Applicability overview tables . 23
7.2.1 Emission . 23
7.2.1.1 General . 23
7.2.1.2 Special conditions . 23
7.2.2 Immunity . 23
7.2.2.1 General . 23
7.2.2.2 Special conditions . 24
Annex A (informative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 25
Annex B (normative): CDMA Direct Spread Performance assessment voice call. Audio
breakthrough . 27
B.1 Calibration of audio levels . 27
B.2 Measurement of audio levels . 28
Annex C (normative): CDMA Direct Spread Performance assessment of data transfer call.
Error Ratios . 29
C.1 Calibration of data transfer . 29
C.1.1 UTRA . 29
C.1.2 E-UTRA . 29
C.2 Assessment of data transfer . 29
C.2.1 UTRA. Derivation of Error Ratios . 29
C.2.2 E-UTRA. Derivation of Throughput Percentages . 30
C.3 EUT without data application ancillary . 30
C.4 EUT with data application ancillary . 31
Annex D (informative): Examples of cellular mobile and portable radio and ancillary
equipment for digital cellular radio telecommunications systems
within the scope of the present document . 32
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
5 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
D.1 Mobile and portable radio equipment, and ancillary equipment meeting Phase 1, Phase 2, and
Phase 2+ requirements of GSM 450 MHz, 900 MHz or DCS 1 800 MHz digital cellular
telecommunications system . 32
D.2 Mobile and portable radio equipment, and ancillary equipment for the IMT-2000 CDMA Direct
Spread (UTRA) . 32
D.3 Mobile and portable radio equipment, and ancillary equipment for the Evolved Universal
Terrestrial Radio Access (E-UTRA) . 33
Annex E (informative): Change History . 34
History . 35
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
6 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to
provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation
of the laws of the Member States relating to the making available on the market of radio equipment and repealing
Directive 1999/5/EC [i.2].
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 52 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
7 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
1 Scope
The present document specifies technical characteristics and methods of measurements for equipment the following
equipment types:
1) digital cellular User Equipment (UE);
2) associated ancillary equipment.
Including individually and combinations of:
• UTRA, WCDMA (IMT-2000 Direct Spread, W-CDMA, UMTS)
• E-UTRA, LTE (IMT-2000 and IMT advanced) (see annex D)
• GSM (IMT-2000 SC, Technology GSM/EDGE) (see annex D)
In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and ETSI EN 301 489-1 [1], the provisions of the present document take precedence.
Technical specifications related to the antenna port and emissions from the enclosure port of radio equipment are not
included in the present document. Such technical specifications are found in the relevant product standards for the
effective use of the radio spectrum.
The environmental classification and the emission and immunity requirements used in the present document are as
stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.
Base station (BS) equipment operating within network infrastructure is outside the scope of the present document.
However, the present document does cover mobile and portable equipment that is intended to be operated in a fixed
location while connected to the AC mains (see clause 5.5).
The present document covers the essential requirements of article 3.1(b) of Directive 2014/53/EU under the conditions
identified in annex A.
2 References
2.1 Normative references
References are specific, identified by date of publication and/or edition number or version number. Only the cited
version applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 489-1 (V2.1.1) (11-2016): "ElectroMagnetic Compatibility (EMC) standard for
radio equipment and services; Part 1: Common technical requirements: Harmonised Standard
covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU and Harmonised
Standard covering the essential requirements of article 6 of the Directive 2014/30/EU".
[2] ETSI TS 134 108 (V6.4.0) (10-2006): "Universal Mobile Telecommunications System (UMTS);
Common test environments for User Equipment (UE); Conformance testing (3GPP TS 34.108
version 6.4.0 Release 6)".
[3] ETSI TS 125 101(V7.5.0) (10-2006): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (FDD) (3GPP TS 25.101 version 7.5.0
Release 7)".
ETSI
---------------------- Page: 9 ----------------------
oSIST prEN 301 489-52 V1.1.0:2017
8 Draft ETSI EN 301 489-52 V1.1.0 (2016-11)
[4] ETSI TS 134 109 (V6.2.0) (09-2006): "Universal Mobile Telecommunications System (UMTS);
Terminal logical test interface; Special conformance testing functions (3GPP TS 34.109
version 6.2.0 Release 6)".
[5] ETSI EN 300 296-1 (V1.4.1) (2013): "Electromagnetic compatibility and Radio spectrum Matters
(ERM); Land Mobile Service; Radio equipment using integral antennas intended primarily for
analogue speech; Part 1: Technical characteristics and methods of measurement".
[6] Recommendation ITU-T P.64 (1999): "Determination of sensitivity/frequency characteristics of
local telephone systems".
[7] Recommendation ITU-T P.76 (1988): "Determination of loudness ratings; fundamental
principles".
[8] ETSI TS 125 102 (V7.4.0) (10-2006): "Universal Mobile Telecommunications System (UMTS);
User Equipment (UE) radio transmission and reception (TDD) (3GPP TS 25.102 version 7.4.0
Release 7)".
[9] ETSI TS 136 101 (V8.4.0) (01-2009): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); User Equipment (UE) radio transmission and reception (3GPP TS 36.101
version 8.4.0 Release 8)".
[10] ETSI TS 136 508 (V8.1.0) (04-2009): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA) and Evolved Packet Core (EPC); Common test environments for User Equipment (UE)
conformance testing (3GPP TS 36.508 version 8.1.0 Release 8)".
[11] ETSI TS 136 509 (V8.0.1) (01-2009): "LTE; Evolved Universal Terrestrial Radio Access
(E-UTRA); Special conformance testing function for User Equipment (UE) (3GPP TS 36.509
version 8.0.1 Release 8)".
[12] ETSI I-ETS 300 034-1 (Edition 1) (10-1993): "European digital cellular telecommunications
system (Phase 1); Radio subsystem link control (GSM 05.08)".
[13] ETSI I-ETS 300 034-2 (Edition 1) (09-1993): "European digital cellular telecommunications
system (Phase 1); Radio subsystem link control; Part 2: DCS extension (GSM 05.08-DCS)".
[14] ETSI ETS 300 578 (Edition 13) (03-1999): "Digital cellular telecommunications system (Phase 2)
(GSM); Radio subsystem link control (GSM 05.08 V4.22.0)".
[15] ETSI TS 100 911 (V8.23.0) (11-2005): "Digital cellular telecommunications system (Phase 2+);
Radio subsystem link control (3GPP TS 05.08 version 8.23.0 Release 1999)".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 121 905 (V8.7.0): "Digital cellular telecommunications system (Phase 2+); Universal
Mobile Telecommunications System (UMTS); LTE; Vocabulary for 3GPP Specifications
(3GPP TR 21.905 version 8.7.0 Release 8)".
[i.2] Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment and repealing Directive 1999/5/EC.
[i.3] ETSI TR 125 990 (V3.0.0): "Universal Mobile Telecommunications System (UMTS); Vocabulary
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.