ETSI TS 102 384 V10.3.0 (2015-08)

Smart Cards; UICC-Terminal interface; Card Application Toolkit (CAT) conformance specification (Release 10)

RTS/SCP-00014va30

General Information

• Status: Published
• Publication Date: 25-Aug-2015
• Technical Committee: SET TEST - SET TEST
• Current Stage: 12 - Completion
• Due Date: 15-Aug-2015
• Completion Date: 26-Aug-2015

Standards Content (Sample)

ETSI TS 102 384 V10.3.0 (2015-08)






TECHNICAL SPECIFICATION
Smart Cards;
UICC-Terminal interface;
Card Application Toolkit (CAT) conformance specification
(Release 10)

---------------------- Page: 1 ----------------------
Release 10 2 ETSI TS 102 384 V10.3.0 (2015-08)



Reference
RTS/SCP-00014va30
Keywords
smart card

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
Release 10 3 ETSI TS 102 384 V10.3.0 (2015-08)
Contents
Intellectual Property Rights . 8
Foreword . 8
Modal verbs terminology . 8
Introduction . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 10
3 Definitions and abbreviations . 10
3.1 Terminal definition and configurations . 10
3.2 Applicability . 10
3.2.1 Applicability of the present document . 10
3.2.2 Applicability of the individual tests . 10
3.2.3 Applicability to terminal equipment . 11
3.2.4 Definitions . 11
3.2.4.1 Format of the table of optional features . 11
3.2.4.2 Format of the applicability table . 11
3.2.4.3 Status and notations. 12
3.3 Table of optional features . 12
3.4 Applicability table . 15
3.5 Conventions for mathematical notations . 56
3.5.1 Mathematical signs . 56
3.6 Abbreviations . 56
4 Test equipment . 56
5 Testing methodology in general . 57
5.1 Testing of optional functions and procedures . 57
5.2 Test interfaces and facilities . 57
5.3 Information to be provided by the apparatus supplier . 57
6 Void . 58
7 Measurement uncertainty . 58
8 Format of tests . 58
9 Generic call set up procedures . 60
10 to 26 Void . 60
27 Testing of the UICC/Terminal interface . 60
27.0 General . 60
27.1 to 27.21 Void . 60
27.22 Card Application Toolkit . 61
27.22.1a General Test purpose . 61
27.22.1b Definition of default values for Card Application Toolkit testing . 61
27.22.1 Initialization of Card Application Toolkit Enabled UICC by Card Application Toolkit Enabled
Terminal (Profile Download) . 64
27.22.1.1 Definition and applicability . 64
27.22.1.2 Conformance requirement . 64
27.22.1.3 Test purpose . 64
27.22.1.4 Method of test . 64
27.22.1.4.1 Initial conditions . 64
27.22.1.4.2 Procedure . 64
27.22.1.5 Test requirement . 65
27.22.2 Contents of the TERMINAL PROFILE command . 65
27.22.2.1 Definition and applicability . 65
ETSI

---------------------- Page: 3 ----------------------
Release 10 4 ETSI TS 102 384 V10.3.0 (2015-08)
27.22.2.2 Conformance requirement . 65
27.22.2.3 Test purpose . 65
27.22.2.4 Method of test . 65
27.22.2.4.1 Initial conditions . 65
27.22.2.4.2 Procedure . 65
27.22.2.5 Test requirement . 66
27.22.3 Servicing of proactive UICC commands . 66
27.22.3.1 Definition and applicability . 66
27.22.3.2 Conformance requirement . 66
27.22.3.3 Test purpose . 66
27.22.3.4 Method of test . 66
27.22.3.4.1 Initial conditions . 66
27.22.3.4.2 Procedure . 66
27.22.3.5 Test requirement . 66
27.22.4 Proactive UICC commands . 67
27.22.4.1 DISPLAY TEXT . 67
27.22.4.1.1 DISPLAY TEXT (Normal) . 67
27.22.4.1.2 DISPLAY TEXT (Support of "No response from user") . 76
27.22.4.1.3 DISPLAY TEXT (Display of extension text). 77
27.22.4.1.4 DISPLAY TEXT (Sustained text) . 79
27.22.4.1.5 DISPLAY TEXT (Display of icons) . 83
27.22.4.1.6 DISPLAY TEXT (UCS2 display supported in Cyrillic) . 88
27.22.4.1.7 DISPLAY TEXT (Variable Time out) . 89
27.22.4.1.8 DISPLAY TEXT (Support of Text Attribute) . 91
27.22.4.1.9 DISPLAY TEXT (UCS2 display in Chinese) . 117
27.22.4.1.10 DISPLAY TEXT (UCS2 display in Katakana) . 119
27.22.4.2 GET INKEY . 120
27.22.4.2.1 GET INKEY(normal) . 120
27.22.4.2.2 GET INKEY (No response from User) . 127
27.22.4.2.3 GET INKEY (UCS2 display in Cyrillic) . 128
27.22.4.2.4 GET INKEY (UCS2 entry in Cyrillic) . 131
27.22.4.2.5 GET INKEY ("Yes/No" Response) . 133
27.22.4.2.6 GET INKEY (display of Icon) . 135
27.22.4.2.7 GET INKEY (Help Information). 143
27.22.4.2.8 GET INKEY (Variable Time out) . 146
27.22.4.2.9 GET INKEY (Support of Text Attribute) . 148
27.22.4.2.10 GET INKEY (UCS2 display in Chinese) . 179
27.22.4.2.11 GET INKEY (UCS2 entry in Chinese) . 182
27.22.4.2.12 GET INKEY (UCS2 display in Katakana) . 183
27.22.4.2.13 GET INKEY (UCS2 entry in Katakana) . 186
27.22.4.3 GET INPUT . 188
27.22.4.3.1 GET INPUT (normal) . 188
27.22.4.3.2 GET INPUT (No response from User) . 201
27.22.4.3.3 GET INPUT (UCS2 display in Cyrillic) . 203
27.22.4.3.4 GET INPUT (UCS2 entry in Cyrillic) . 206
27.22.4.3.5 GET INPUT (default text) . 209
27.22.4.3.6 GET INPUT (display of Icon) . 213
27.22.4.3.7 GET INPUT (Help Information) . 220
27.22.4.3.8 GET INPUT (Support of Text Attribute) . 222
27.22.4.3.9 GET INPUT (UCS2 display in Chinese) . 258
27.22.4.3.10 GET INPUT (UCS2 entry in Chinese) . 261
27.22.4.3.11 GET INPUT (UCS2 display in Katakana) . 265
27.22.4.3.12 GET INPUT (UCS2 entry in Katakana) . 268
27.22.4.4 MORE TIME . 271
27.22.4.4.1 Definition and applicability . 271
27.22.4.4.2 Conformance requirement . 271
27.22.4.4.3 Test purpose . 271
27.22.4.4.4 Method of test . 271
27.22.4.4.5 Test requirement . 272
27.22.4.5 PLAY TONE. 272
27.22.4.5.1 PLAY TONE (Normal) . 272
27.22.4.5.2 PLAY TONE (UCS2 display in Cyrillic) . 284
ETSI

---------------------- Page: 4 ----------------------
Release 10 5 ETSI TS 102 384 V10.3.0 (2015-08)
27.22.4.5.3 PLAY TONE (display of Icon) . 287
27.22.4.5.4 PLAY TONE (Support of Text Attribute) . 294
27.22.4.5.5 PLAY TONE (UCS2 display in Chinese) . 323
27.22.4.5.6 PLAY TONE (UCS2 display in Katakana) . 326
27.22.4.6 POLL INTERVAL . 329
27.22.4.6.1 Definition and applicability . 329
27.22.4.6.2 Conformance requirement . 329
27.22.4.6.3 Test purpose . 329
27.22.4.6.4 Method of test . 329
27.22.4.6.5 Test requirement . 331
27.22.4.7 REFRESH . 331
27.22.4.7.1 REFRESH (normal) . 331
27.22.4.8 SET UP MENU and ENVELOPE MENU SELECTION . 333
27.22.4.8.1 SET UP MENU (normal) and ENVELOPE MENU SELECTION . 333
27.22.4.8.2 SET UP MENU (help request support) and ENVELOPE MENU SELECTION . 344
27.22.4.8.3 SET UP MENU (next action support) and ENVELOPE MENU SELECTION . 346
27.22.4.8.4 SET UP MENU (display of icons) and ENVELOPE MENU SELECTION . 349
27.22.4.8.5 SET UP MENU (soft keys support) and ENVELOPE MENU SELECTION . 354
27.22.4.8.6 SET UP MENU (support of Text Attribute) and ENVELOPE MENU SELECTION . 356
27.22.4.8.7 SET UP MENU (UCS2 display in Cyrillic) and ENVELOPE MENU SELECTION . 392
27.22.4.8.8 SET UP MENU (UCS2 display in Chinese) and ENVELOPE MENU SELECTION . 397
27.22.4.8.9 SET UP MENU (UCS2 display in Katakana) and ENVELOPE MENU SELECTION . 401
27.22.4.9 SELECT ITEM . 405
27.22.4.9.1 SELECT ITEM (mandatory features for Terminal supporting SELECT ITEM) . 405
27.22.4.9.2 SELECT ITEM (next action support) . 418
27.22.4.9.3 SELECT ITEM (default item support) . 419
27.22.4.9.4 SELECT ITEM (help request support) . 421
27.22.4.9.5 SELECT ITEM (icons support) . 423
27.22.4.9.6 SELECT ITEM (presentation style) . 427
27.22.4.9.7 SELECT ITEM (soft keys support) . 430
27.22.4.9.8 SELECT ITEM (Support of "No response from user") . 431
27.22.4.9.9 SELECT ITEM (Support of Text Attribute). 433
27.22.4.9.10 SELECT ITEM (UCS2 display in Cyrillic) . 467
27.22.4.9.11 SELECT ITEM (UCS2 display in Chinese) . 472
27.22.4.9.12 SELECT ITEM (UCS2 display in Katakana) . 474
27.22.4.10 SEND SHORT MESSAGE . 478
27.22.4.11 Void. 478
27.22.4.12 Void. 478
27.22.4.13 SET UP CALL . 478
27.22.4.14 POLLING OFF . 478
27.22.4.15 PROVIDE LOCAL INFORMATION . 478
27.22.4.15.1 Definition and applicability . 478
27.22.4.15.2 Conformance requirement . 478
27.22.4.15.3 Test purpose . 478
27.22.4.15.4 Method of tests . 479
27.22.4.15.5 Test requirement . 487
27.22.4.16 SET UP EVENT LIST . 487
27.22.4.16.1 SET UP EVENT LIST (normal) . 487
27.22.4.17 PERFORM CARD APDU . 494
27.22.4.17.1 PERFORM CARD APDU (normal) . 494
27.22.4.18 POWER OFF CARD . 512
27.22.4.18.1 POWER OFF CARD (normal) . 512
27.22.4.18.2 POWER OFF CARD (detachable card reader) . 514
27.22.4.19 POWER ON CARD . 515
27.22.4.19.1 POWER ON CARD (normal) . 515
27.22.4.19.2 POWER ON CARD (detachable card reader) . 519
27.22.4.20 GET READER STATUS . 520
27.22.4.20.1 GET READER STATUS (normal) . 520
27.22.4.20.2 GET CARD READER STATUS (detachable card reader) . 530
27.22.4.21 TIMER MANAGEMENT and ENVELOPE TIMER EXPIRATION . 532
27.22.4.21.1 TIMER MANAGEMENT (normal) . 532
27.22.4.21.2 ENVELOPE TIMER EXPIRATION (normal) . 569
ETSI

---------------------- Page: 5 ----------------------
Release 10 6 ETSI TS 102 384 V10.3.0 (2015-08)
27.22.4.22 SET UP IDLE MODE TEXT. 575
27.22.4.22.1 SET UP IDLE MODE TEXT (normal) . 575
27.22.4.22.2 SET UP IDLE MODE TEXT (Icon support) . 584
27.22.4.22.3 SET UP IDLE MODE TEXT (UCS2 display in Cyrillic) . 590
27.22.4.22.4 SET UP IDLE MODE TEXT (support of Text Attribute) . 591
27.22.4.22.5 SET UP IDLE MODE TEXT (UCS2 display in Chinese) . 618
27.22.4.22.6 SET UP IDLE MODE TEXT (UCS2 display in Katakana) . 620
27.22.4.23 RUN AT COMMAND . 621
27.22.4.23.1 RUN AT COMMAND (normal) .
...