ETSI TS 119 124-5 V1.1.1 (2016-06)

Electronic Signatures and Infrastructures (ESI); CAdES digital signatures - Testing Conformance and Interoperability; Part 5: Testing Conformance of extended CAdES signatures

DTS/ESI-0019124-5

General Information

• Status: Published
• Publication Date: 23-Jun-2016
• Technical Committee: ESI - Electronic Signatures and Infrastructures
• Current Stage: 12 - Completion
• Due Date: 06-Jul-2016
• Completion Date: 24-Jun-2016
• Mandate: M/460

Standards Content (Sample)

ETSI TS 119 124-5 V1.1.1 (2016-06)






TECHNICAL SPECIFICATION
Electronic Signatures and Infrastructures (ESI);
CAdES digital signatures -
Testing Conformance and Interoperability;
Part 5: Testing conformance of extended CAdES signatures

---------------------- Page: 1 ----------------------
2 ETSI TS 119 124-5 V1.1.1 (2016-06)



Reference
DTS/ESI-0019124-5
Keywords
CAdES, conformance, e-commerce, electronic
signature, profile, security, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2016.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 119 124-5 V1.1.1 (2016-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Overview . 6
5 Testing conformance to CAdES-E-BES extended signatures . 7
5.1 Introduction . 7
5.2 Testing CMSversion . 7
5.3 Testing DigestAlgorithmIdentifiers . 8
5.4 Testing EncapsulatedContentInfo . 8
5.5 Testing SignedData.certificates . 8
5.6 Testing SignedData.crls . 8
5.7 Testing SignerInfos . 8
5.8 Testing content-type . 8
5.9 Testing message-digest . 8
5.10 Testing signing-time . 8
5.11 Testing Enhanced Security Services (ESS) . 9
5.12 Testing commitment-type-indication . 9
5.13 Testing signer-location . 9
5.14 Testing signer-attributes-v2 . 9
5.15 Testing counter-signature . 9
5.16 Testing content-time-stamp . 9
5.17 Testing content-reference . 9
5.18 Testing content-identifier . 9
5.19 Testing content-hints . 9
5.20 Testing mime-type . 10
6 Testing conformance to CAdES-E-EPES extended signatures . 10
6.1 Introduction . 10
6.2 Testing signature-policy-identifier . 10
6.3 Testing signature-policy-store . 10
7 Testing conformance to CAdES-E-T extended signatures . 10
7.1 Introduction . 10
7.2 Testing SignatureTimeStamp . 10
8 Testing conformance to CAdES-E-A extended signatures . 11
8.1 Introduction . 11
8.2 Testing ArchiveTimeStampV3 . 11
8.3 Testing Certificate and Revocation references . 11
8.4 Testing Certificate and Revocation values . 12
8.5 Testing time-stamp attributes . 12
History . 13


ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 119 124-5 V1.1.1 (2016-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Electronic Signatures and
Infrastructures (ESI).
The present document is part 5 of a multi-part deliverable covering CAdES digital signatures - Testing Conformance
and Interoperability. Full details of the entire series can be found in part 1 [i.1].
A tool implementing the present document has been developed and is accessible at http://signatures-conformance-
checker.etsi.org/.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 119 124-5 V1.1.1 (2016-06)
1 Scope
The present document defines the checks to be performed for testing conformance of CAdES signatures against
extended CAdES signatures as specified in ETSI EN 319 122-2 [2]. It defines only the checks that are specific to
extended CAdES signatures. The set of checks that are common to both extended and baseline CAdES signatures, are
defined in ETSI TS 119 124-4 [3].
The complete set of checks to be performed by any tool on CAdES extended signatures is the union of the sets defined
within the present document and the set of common checks for testing conformance against ETSI EN 319 122-1 [1] and
ETSI EN 319 122-2 [2] defined in ETSI TS 119 124-4 [3], as indicated in the normative clauses of the present
document.
The present document does not specify checks leading to conclude whether a signature is technically valid or not (for
instance, it does not specify checks for determining whether the cryptographic material present in the signature may be
considered valid or not). In consequence, no conclusion may be inferred regarding the technical validity of a signature
that has been successfully tested by any tool conformant to the present document.
Checks specified by the present document are exclusively constrained to elements specified by CAdES [1].
Regarding CAdES attributes, the present document explicitly differentiates between structural requirements that are
defined on building blocks, and the requirements specified for extended CAdES signatures conformance.
The present document is intentionally not linked to any software development technology and is also intentionally
agnostic on implementation strategies. This is one of the reasons why the test assertions set specified in the present
document includes tests on the correctness of the structure of all the elements specified by CAdES [1].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference/.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 319 122-1: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures;
Part 1: Building blocks and CAdES baseline signatures".
[2] ETSI EN 319 122-2: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures;
Part 2: Extended CAdES signatures".
[3] ETSI TS 119 124-4: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures -
Testing Conformance and Interoperability; Part 4: Testing conformance of CAdES baseline
signatures".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 119 124-5 V1.1.1 (2016-06)
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 119 124-1: "Electronic Signatures and Infrastructures (ESI); CAdES digital signatures -
Testing Conformance and Interoperability; Part 1: Overview".
[i.2] ETSI TR 119 001: "Electronic Signatures and Infrastructures (ESI); The framework for
standardization of signatures; Definitions and abbreviations".
[i.3] OASIS Committee Notes: "Test Assertions Guidelines Version 1.0" Committee Note 02, 19
June 2013.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI TR 119 001 [i.2] apply.
3.2 Abbrevia
...