Short Range Devices (SRD) to be used in the 40 GHz to 260 GHz frequency range; Harmonised Standard for access to radio spectrum; Part 5: Ultra Short Range Communication (USRC) equipment operating within 57 GHz to 64 GHz

DEN/ERM-TGUWB-605EN 305 550-5

Naprave kratkega dosega (SRD) za uporabo v frekvenčnih območjih od 40 GHz do 260 GHz - Harmonizirani standard za dostop do radijskega spektra - 5.del: Komunikacijska oprema ultra kratkega dosega (USRC), ki deluje v območju od 57 GHz do 64 GHz

General Information

Status
Not Published
Technical Committee
Current Stage
12 - Citation in the OJ (auto-insert)
Due Date
03-Jul-2025
Completion Date
04-Jul-2025

Buy Standard

Standard
ETSI EN 305 550-5 V1.0.0 (2025-03) - Short Range Devices (SRD) to be used in the 40 GHz to 260 GHz frequency range; Harmonised Standard for access to radio spectrum; Part 5: Ultra Short Range Communication (USRC) equipment operating within 57 GHz to 64 GHz
English language
35 pages
sale 15% off
Preview
sale 15% off
Preview
Draft
prEN 305 550-5 V1.0.0:2025 - BARVE
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


Draft ETSI EN 305 550-5 V1.0.0 (2025-03)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) to be used
in the 40 GHz to 260 GHz frequency range;
Harmonised Standard for access to radio spectrum;
Part 5: Ultra Short Range Communication (USRC)
equipment operating within 57 GHz to 64 GHz

2 Draft ETSI EN 305 550-5 V1.0.0 (2025-03)
Reference
DEN/ERM-TGUWB-605EN 305 550-5
Keywords
RADIO, radio measurements, SRD

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 Draft ETSI EN 305 550-5 V1.0.0 (2025-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 Equipment categories . 10
4.3 Transmitter requirements . 12
4.3.1 General . 12
4.3.2 Operating Frequency Range (OFR) . 12
4.3.2.1 Applicability. 12
4.3.2.2 Description . 12
4.3.2.3 Limits . 12
4.3.2.4 Conformance . 12
4.3.3 Mean e.i.r.p. . 12
4.3.3.1 Applicability. 12
4.3.3.2 Description . 12
4.3.3.3 Limits . 13
4.3.3.4 Conformance . 13
4.3.4 Transmitter unwanted emissions (TXUE) . 13
4.3.4.1 Applicability. 13
4.3.4.2 Description . 13
4.3.4.3 Limits for TXUE . 13
4.3.5 TX behaviour under the complete environmental profile . 14
4.3.5.1 Applicability. 14
4.3.5.2 Description . 14
4.3.5.3 Limits for radiated assessment of the TX behaviour . 14
4.3.5.4 Conformance . 15
4.4 Receiver requirements . 15
4.4.1 General . 15
4.4.2 Wanted technical performance criterion . 15
4.4.3 Receiver spurious emissions . 15
4.4.3.1 Applicability. 15
4.4.3.2 Description . 15
4.4.3.3 Limits . 15
4.4.3.4 Conformance . 16
4.4.4 Receiver Baseline Sensitivity (RBS) . 16
4.4.4.1 Applicability. 16
4.4.4.2 Description . 16
4.4.4.3 Limits . 16
4.4.4.4 Conformance . 16
4.4.5 Receiver Dynamic Range . 16
4.4.5.1 Applicability. 16
4.4.5.2 Description . 16
4.4.5.3 Limits . 16
ETSI
4 Draft ETSI EN 305 550-5 V1.0.0 (2025-03)
4.4.5.4 Conformance . 17
4.4.6 Receiver Baseline Resilience (RBR) . 17
4.4.6.1 Applicability. 17
4.4.6.2 Description . 17
4.4.6.3 Limits . 17
4.4.6.4 Conformance . 18
5 Testing for compliance with technical requirements . 18
5.1 Environmental conditions for testing . 18
5.1.1 General . 18
5.1.2 Normal test conditions . 18
5.1.3 Complete environmental profile test conditions . 18
5.2 Conformance test suites and general conditions for testing . 18
5.3 Test scenarios . 19
5.4 Conformance methods of measurement for TX requirements . 22
5.4.1 Operating Frequency Range (OFR) . 22
5.4.2 Mean e.i.r.p. . 23
5.4.3 TX unwanted emissions . 23
5.4.3.1 General . 23
5.4.3.2 Unwanted emission in the Out-Of-Band (OOB) domain .
...


SLOVENSKI STANDARD
01-maj-2025
Naprave kratkega dosega (SRD) za uporabo v frekvenčnih območjih od 40 GHz do
260 GHz - Harmonizirani standard za dostop do radijskega spektra - 5.del:
Komunikacijska oprema ultra kratkega dosega (USRC), ki deluje v območju od 57
GHz do 64 GHz
Short Range Devices (SRD) to be used in the 40 GHz to 260 GHz frequency range -
Harmonised Standard for access to radio spectrum - Part 5: Ultra Short Range
Communication (USRC) equipment operating within 57 GHz to 64 GHz
Ta slovenski standard je istoveten z: ETSI EN 305 550-5 V1.0.0 (2025-03)
ICS:
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

Draft ETSI EN 305 550-5 V1.0.0 (2025-03)

HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) to be used
in the 40 GHz to 260 GHz frequency range;
Harmonised Standard for access to radio spectrum;
Part 5: Ultra Short Range Communication (USRC)
equipment operating within 57 GHz to 64 GHz

2 Draft ETSI EN 305 550-5 V1.0.0 (2025-03)
Reference
DEN/ERM-TGUWB-605EN 305 550-5
Keywords
RADIO, radio measurements, SRD

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871

Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.

Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2025.
All rights reserved.
ETSI
3 Draft ETSI EN 305 550-5 V1.0.0 (2025-03)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 6
Introduction . 6
1 Scope . 7
2 References . 7
2.1 Normative references . 7
2.2 Informative references . 7
3 Definition of terms, symbols and abbreviations . 8
3.1 Terms . 8
3.2 Symbols . 9
3.3 Abbreviations . 9
4 Technical requirements specifications . 9
4.1 Environmental profile . 9
4.2 Equipment categories . 10
4.3 Transmitter requirements . 12
4.3.1 General . 12
4.3.2 Operating Frequency Range (OFR) . 12
4.3.2.1 Applicability. 12
4.3.2.2 Description . 12
4.3.2.3 Limits . 12
4.3.2.4 Conformance . 12
4.3.3 Mean e.i.r.p. . 12
4.3.3.1 Applicability. 12
4.3.3.2 Description . 12
4.3.3.3 Limits . 13
4.3.3.4 Conformance . 13
4.3.4 Transmitter unwanted emissions (TXUE) . 13
4.3.4.1 Applicability. 13
4.3.4.2 Description . 13
4.3.4.3 Limits for TXUE . 13
4.3.5 TX behaviour under the complete environmental profile . 14
4.3.5.1 Applicability. 14
4.3.5.2 Description . 14
4.3.5.3 Limits for radiated assessment of the TX behaviour . 14
4.3.5.4 Conformance . 15
4.4 Receiver requirements . 15
4.4.1 General . 15
4.4.2 Wanted technical performance criterion . 15
4.4.3 Receiver spurious emissions . 15
4.4.3.1 Applicability. 15
4.4.3.2 Description . 15
4.4.3.3 Limits . 15
4.4.3.4 Conformance . 16
4.4.4 Receiver Baseline Sensitivity (RBS) . 16
4.4.4.1 Applicability. 16
4.4.4.2 Description . 16
4.4.4.3 Limits . 16
4.4.4.4 Conformance . 16
4.4.5 Receiver Dynamic Range . 16
4.4.5.1 Applicability. 16
4.4.5.2 Description . 16
4.4.5.3 Limits . 16
ETSI
4 Draft ETSI EN 305 550-5 V1.0.0 (2025-03)
4.4.5.4 Conformance . 17
4.4.6 Receiver Baseline Resilience (RBR) . 17
4.4.6.1 Applicability. 17
4.4.6.2 Description . 17
4.4.6.3 Limits . 17
4.4.6.4 Conformance . 18
5 Testing for compliance with technical requirements . 18
5.1 Environmental conditions for testing . 18
5.1.1 General . 18
5.1.2 Normal test conditions . 18
5.1.3 Complete environmental profile test conditions . 18
5.2 Conformance test suites and general cond
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.