ETSI EN 301 841-3 V1.1.1 (2011-11)
VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
DEN/ERM-JTFEA-006
Digitalne povezave VHF zrak-tla (VDL), 2. način - Tehnične karakteristike in merilne metode za talno opremo - 3. del: Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE
Ta dokument velja za digitalne komunikacije zrak-tla VDL, 2. način, ki uporabljajo diferencialno osemfazno premično šifriranje (D8PSK), namenjeno kanalni prirasti 25 kHz. Sistem VDL, 2. način, zagotavlja izmenjavo podatkovne komunikacije med zračnim plovilom in talnimi sistemi, ki delujejo v pasu VHF (od 117.975 MHz do 137.000 MHz).
Področje uporabe tega dokumenta je omejeno na talne postaje.
OPOMBA 1: VDL, 2. način, se lahko uporabi kot zrak/tla podomrežje aeronavtičnega telekomunikacijskega omrežja (ATN) z uporabo pasu z razporeditvijo spektra AM(R)S.
Namen tega dokumenta je zajem določbe člena 3.2 Direktive 1999/5/ES [i.2], (direktive R&TTE), ki navaja, da »… radijska oprema je narejena tako, da učinkovito izrablja spekter, razporejen za prizemne/vesoljske radiokomunikacije in orbitalne vire, tako da ne pride do škodljivega motenja«.
Poleg tega dokumenta se preostali EN, ki določajo tehnične zahteve v skladu z bistvenimi zahtevami v drugih delih člena 3 direktive R&TTE in bistvene zahteve iz Uredbe o interoperabilnosti za enotno evropsko nebo [i.3] (z dopolnitvami) ter ustrezna pravila za izvedbo, lahko uporabljajo za opremo v okviru področja uporabe tega dokumenta.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 301 841-3 V1.1.1:2011
01-december-2011
'LJLWDOQHSRYH]DYH9+)]UDNWOD 9'/ QDþLQ7HKQLþQHNDUDNWHULVWLNHLQPHULOQH
PHWRGH]DWDOQRRSUHPRGHO +DUPRQL]LUDQL(1NL]DMHPDELVWYHQH]DKWHYH
þOHQDGLUHNWLYH5 77(
VHF air-ground Digital Link (VDL) Mode 2 - Technical characteristics and methods of
measurement for ground-based equipment - Part 3: Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 301 841-3 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
SIST EN 301 841-3 V1.1.1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 301 841-3 V1.1.1:2011
---------------------- Page: 2 ----------------------
SIST EN 301 841-3 V1.1.1:2011
ETSI EN 301 841-3 V1.1.1 (2011-11)
Harmonized European Standard
VHF air-ground Digital Link (VDL) Mode 2;
Technical characteristics and methods of measurement
for ground-based equipment;
Part 3: Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive
---------------------- Page: 3 ----------------------
SIST EN 301 841-3 V1.1.1:2011
2 ETSI EN 301 841-3 V1.1.1 (2011-11)
Reference
DEN/ERM-JTFEA-006
Keywords
aeronautical, AM, DSB, radio, testing, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 301 841-3 V1.1.1:2011
3 ETSI EN 301 841-3 V1.1.1 (2011-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions and abbreviations . 7
3.1 Definitions . 7
3.2 Abbreviations . 8
4 Technical requirements specifications . 8
4.1 Environmental profile . 8
4.2 Conformance requirements . 8
4.2.1 Transmitter requirements . 8
4.2.1.1 Frequency error . 8
4.2.1.1.1 Requirement . 8
4.2.1.1.2 Conformance . 9
4.2.1.2 Manufacturer's declared output power . 9
4.2.1.2.1 Requirement . 9
4.2.1.2.2 Conformance . 9
4.2.1.3 Adjacent channel power . 9
4.2.1.3.1 Requirement . 9
4.2.1.3.2 Conformance . 9
4.2.1.4 Conducted spurious emissions . 9
4.2.1.4.1 Requirement . 9
4.2.1.4.2 Conformance . 9
4.2.1.5 Cabinet radiation . 9
4.2.1.5.1 Requirement . 9
4.2.1.5.2 Conformance . 9
4.2.1.6 Void. 9
4.2.1.7 Intermodulation attenuation . 9
4.2.1.7.1 Requirements . 9
4.2.1.7.2 Conformance . 10
4.2.1.8 RF power release time . 10
4.2.1.8.1 Requirement . 10
4.2.1.8.2 Conformance . 10
4.2.1.9 Void. 10
4.2.1.10 Transient behaviour of the transmitter . 10
4.2.1.10.1 Receiver to transmitter turn-around time . 10
4.2.1.10.2 Transmitter to receiver turn-around time . 10
4.2.1.11 Modulation Accuracy - Symbol constellation error . 10
4.2.1.11.1 Requirement . 10
4.2.1.11.2 Conformance . 10
4.2.2 Receiver requirements . 10
4.2.2.1 Sensitivity . 10
4.2.2.1.1 Requirement . 10
4.2.2.1.2 Conformance . 11
4.2.2.2 Co-channel interference . 11
4.2.2.2.1 Requirement . 11
4.2.2.2.2 Conformance . 11
4.2.2.3 First adjacent channel rejection . 11
4.2.2.3.1 Requirement . 11
4.2.2.3.2 Conformance . 11
ETSI
---------------------- Page: 5 ----------------------
SIST EN 301 841-3 V1.1.1:2011
4 ETSI EN 301 841-3 V1.1.1 (2011-11)
4.2.2.4 Spurious response rejection of signals within the VHF aeronautical band . 11
4.2.2.4.1 Requirement . 11
4.2.2.4.2 Conformance . 11
4.2.2.5 Spurious response rejection of signals outside the VHF aeronautical band . 11
4.2.2.5.1 Requirement . 11
4.2.2.5.2 Conformance . 11
4.2.2.6 In-band Intermodulation response rejection . 11
4.2.2.6.1 Requirement . 11
4.2.2.6.2 Conformance . 11
4.2.2.7 Blocking or desensitization . 12
4.2.2.7.1 Requirement . 12
4.2.2.7.2 Conformance . 12
4.2.2.8 Conducted spurious emission . 12
4.2.2.8.1 Requirement . 12
4.2.2.8.2 Conformance . 12
4.2.2.9 Cabinet radiation . 12
4.2.2.9.1 Requirement . 12
4.2.2.9.2 Conformance . 12
5 Testing for compliance with technical requirements . 12
5.1 Environmental conditions for testing . 12
5.1.1 Normal and extreme test conditions. 12
5.1.2 Test power source . 12
5.2 Interpretation of the measurement results . 13
5.3 Essential radio test suites . 14
5.3.1 Transmitter test specifications . 14
5.3.1.1 Frequency error . 14
5.3.1.2 Manufacturer's declared output power . 14
5.3.1.3 Adjacent channel power . 14
5.3.1.4 Conducted Spurious emissions . 14
5.3.1.5 Cabinet Radiation . 14
5.3.1.6 Void. 14
5.3.1.7 Inter-modulation attenuation . 14
5.3.1.8 RF power release time . 14
5.3.1.9 Void. 14
5.3.1.10 Transient behaviour of the transmitter . 14
5.3.1.10.1 Receiver to transmitter turn-around time . 14
5.3.1.10.2 Transmitter to receiver turn-around time . 14
5.3.1.11 Modulation accuracy - Symbol constellation error . 14
5.3.2 Receiver test specifications . 15
5.3.2.1 Sensitivity . 15
5.3.2.2 Co-channel interference . 15
5.3.2.3 Adjacent channel rejection . 15
5.3.2.4 Spurious response rejection of signals within the VHF aeronautical band . 15
5.3.2.5 Spurious response rejection of signals outside the VHF aeronautical band . 15
5.3.2.6 In-band Intermodulation rejection . 15
5.3.2.7 Blocking or desensitization . 15
5.3.2.8 Conducted spurious emission . 15
5.3.2.9 Cabinet Radiation . 15
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 16
Annex B (informative): The EN title in the official languages . 18
Annex C (informative): Bibliography . 19
History . 20
ETSI
---------------------- Page: 6 ----------------------
SIST EN 301 841-3 V1.1.1:2011
5 ETSI EN 301 841-3 V1.1.1 (2011-11)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM).
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [i.5] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The title and reference to the present document are intended to be included in the publication in the Official Journal of
the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.2].
See article 5.1 of Directive 1999/5/EC [i.2] for information on presumption of conformity and Harmonized Standards or
parts thereof the references of which have been published in the Official Journal of the European Union.
The requirements relevant to Directive 1999/5/EC [i.2] are summarized in annex A.
The present document is part 3 of a multi-part deliverable covering VHF air-ground Digital Link (VDL) Mode 2;
Technical characteristics and methods of measurement for ground-based equipment, as identified below:
Part 1: "Physical layer and MAC sub-layer";
Part 2: "Upper layers";
Part 3: "Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 7 November 2011
Date of latest announcement of this EN (doa): 29 February 2012
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 August 2012
Date of withdrawal of any conflicting National Standard (dow): 31 August 2012
Introduction
The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to
cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.2]. The
modular structure is shown in EG 201 399 [i.4].
ETSI
---------------------- Page: 7 ----------------------
SIST EN 301 841-3 V1.1.1:2011
6 ETSI EN 301 841-3 V1.1.1 (2011-11)
1 Scope
The present document applies to VDL Mode 2 ground-air digital communications using Differential Eight Phase Shift
Keying (D8PSK), intended for channel increments of 25 kHz. The VDL Mode 2 system provides data communication
exchanges between aircraft and ground-based systems, operating in the VHF band (117,975 MHz to 137,000 MHz).
The scope of the present document is limited to ground based stations.
NOTE 1: The VDL Mode 2 can be used as an Air/Ground sub-network of the Aeronautical Telecommunication
Network (ATN) using a band with AM(R)S spectrum allocation.
The present document is intended to cover the provisions of Directive 1999/5/EC [i.2] (R&TTE Directive), article 3.2,
which states that ". radio equipment shall be so constructed that it effectively uses the spectrum allocated to
terrestrial/space radio communications and orbital resources so as to avoid harmful interference".
In addition to the present document, other ENs that specify technical requirements in respect of essential requirements
under other parts of article 3 of the R&TTE Directive as well as essential requirements under the Single European Sky
Interoperability Regulation [i.3] (as amended) and related implementing rules may apply to equipment within the scope
of the present document.
NOTE 2: A list of such ENs is included on the web site http://www.newapproach.org.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] ETSI EN 301 841-1 (V1.3.1): "VHF air-ground Digital Link (VDL) Mode 2; Technical
characteristics and methods of measurement for ground-based equipment; Part 1: Physical layer
and MAC sub-layer".
[2] ETSI EN 300 113-1 (V1.6.2): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using
constant or non-constant envelope modulation and having an antenna connector; Part 1: Technical
characteristics and methods of measurement".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI TR 100 028 (all parts): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Uncertainties in the measurement of mobile radio equipment characteristics".
ETSI
---------------------- Page: 8 ----------------------
SIST EN 301 841-3 V1.1.1:2011
7 ETSI EN 301 841-3 V1.1.1 (2011-11)
[i.2] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
NOTE: As amended by Regulation (EC) 1882/2003 of the European Parliament and of the Council of
29 March 2003.
[i.3] Regulation (EC) 552/2004 of the European Parliament and Council of 10 March 2004 on the
interoperability of the European Air Traffic Management network (the interoperability
Regulation).
NOTE: OJEU L96, 31.03.2004, p. 26-42 as amended by Regulation (EC) 1070/2009 of the European Parliament
and of the Council of 21 October 2009, OJEU L300/34, 14/11/2009.
[i.4] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to
the production of Harmonized Standards for application under the R&TTE Directive".
[i.5] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a
procedure for the provision of information in the field of technical standards and regulations and of
rules on Information Society services as amended by Directive 98/48/EC of the European
Parliament and of the Council of 20 July 1998 and by Council Directive 2006/96/EC of
20 November 2006.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [i.2] and the
following apply:
adjacent channel power: amount of the modulated RF signal power transmitted outside of the assigned channel
NOTE: Adjacent channel power includes discrete spurious, signal sidebands, and noise density (including phase
noise) at the transmitter output.
adjacent channel rejection: receiver's ability to demodulate the desired signal and meet the uncorrected BER
requirement in the presence of an interfering signal in an adjacent channel
NOTE: The ratio (in dB) between the adjacent interfering signal level and the desired signal level necessary to
achieve the specified minimum uncorrected BER, is the Adjacent Channel Rejection (ACR) ratio.
Aeronautical Mobile Service (AMS): mobile service between ground based stations and airborne stations, or between
aircraft stations, in which survival craft stations may participate
average transmitter output power: average power supplied to the antenna transmission line by a transmitter during an
interval of time sufficiently long, compared with the lowest frequency encountered in the modulation, taken under
normal operating conditions
Bit Error Rate (BER): ratio between the number of erroneous bits received and the total number of bits received
NOTE: The uncorrected BER represents the BER without the benefit of Forward Error Correction (FEC).
Co-Channel Interference (CCI): capability of a receiver to demodulate the desired signal and achieve the minimum
specified BER performance in the presence of an unwanted signal at the same assigned channel
NOTE: The ratio (in dB) between the wanted signal level and the unwanted signal level is the co-channel
interference ratio.
conducted measurements: measurements which are made using a direct RF connection to the equipment under test
data rate: with a nominal data rate of 31 500 bits/s, the VDL Mode 2 symbol rate is expected to be 10 500 symbols/s
ETSI
---------------------- Page: 9 ----------------------
SIST EN 301 841-3 V1.1.1:2011
8 ETSI EN 301 841-3 V1.1.1 (2011-11)
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
ground based station: aeronautical station equipment, in the Aeronautical Mobile Service (AMS), for use with an
external ant
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.