ETSI TS 102 726-3 V2.2.1 (2015-10)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMRTM); Part 3: Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification

RTS/ERM-TGDMR-353

General Information

• Status: Published
• Publication Date: 12-Oct-2015
• Technical Committee: ERM TGDMR - Digital Mobile Radio
• Current Stage: 12 - Completion
• Due Date: 13-Oct-2015
• Completion Date: 13-Oct-2015

Standards Content (Sample)

ETSI TS 102 726-3 V2.2.1 (2015-10)






TECHNICAL SPECIFICATION
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Conformance testing for Mode 1 of
TM
the digital Private Mobile Radio (dPMR );
Part 3: Interoperability Test Suite Structure and
Test Purposes (TSS&TP) specification

---------------------- Page: 1 ----------------------
2 ETSI TS 102 726-3 V2.2.1 (2015-10)



Reference
RTS/ERM-TGDMR-353
Keywords
digital, interoperability, mobile, radio, testing,
TSS&TP

ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 102 726-3 V2.2.1 (2015-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Executive summary . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Abbreviations . 6
4 Test Suite Structure (TSS) . 6
5 Test Purposes (TP) . 7
5.0 Preamble . 7
5.1 Framing . 7
5.1.1 Addressing . 7
5.1.1.1 All Call . 7
5.1.1.2 Dialling Plan . 7
5.1.1.3 Talking Party ID . 12
5.1.2 Base Station framing . 13
5.1.3 Channel Access . 17
5.1.3.0 General . 17
5.1.3.1 OACSU . 19
5.1.3.2 PTT Call . 20
5.1.4 END frame . 20
5.1.5 Message frame . 21
5.1.5.1 Message Information field . 21
5.1.6 Payload . 21
5.1.6.1 Packet data . 21
5.1.6.2 Short data . 21
5.1.6.3 T1 data . 24
5.1.6.4 T2 data . 25
5.1.6.5 Voice . 26
5.1.6.5.1 Voice and attached data . 26
5.1.6.5.2 Late entry . 27
5.1.6.5.3 Slow user data . 28
5.1.7 Power save . 29
5.1.8 Superframe . 29
5.1.8.1 Traffic channel . 29
5.1.8.2 Voice TCH . 29
TM
Annex A (normative): dPMR interoperability test configurations . 30
A.1 Generic test configurations . 30
A.1.1 Mode 1 equipment . 30
A.1.2 Mode 2 equipment - MS . 30
A.1.3 Mode 2 equipment - BS . 30
A.1.3.1 BS2 general configuration . 30
A.1.3.2 BS2 Limited Mode . 30
A.1.3.3 BS2 Transparent Mode . 30
Annex B (normative): dPMR™ TPLan interoperability testing user definitions . 31
Annex C (informative): Change History . 34
History . 35

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 102 726-3 V2.2.1 (2015-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Electromagnetic compatibility and
Radio spectrum Matters (ERM).
The present document is part 3 of a multi-part deliverable covering the Conformance testing for Modes 1and 2 of the
digital Private Mobile Radio (dPMR™) as identified below:
Part 1: "Protocol Implementation Conformance Statement (PICS) proforma";
Part 2: "Test Suite Structure and Test Purposes (TSS&TP) specification";
Part 3: "Interoperability Test Suite Structure and Test Purposes (TSS&TP) specification".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Executive summary
The present document describes the interoperability test requirements for digital Private Mobile Radio compliant to the
ETSI TS102 658 standard.
It is intended to be used in conjunction with the Protocol Implementation Conformance standard (PICS) ETSI
TS 102 726-1 [i.2] which describes the applicable functions of the equipment being evaluated. The actual test procedure
and the required test result for each of those functions can be found in the present document.

ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 102 726-3 V2.2.1 (2015-10)
1 Scope
The present document specifies the interoperability Test Purposes (TPs) for the Digital Private Mobile Radio (dPMR™)
standard, ETSI TS 102 658 [1]. TPs are defined using the TPLan notation described in ETSI ES 202 553 [i.1]. Test
purposes have been written based on the test specification framework described in ETSI TS 102 351 [2] and based on
the methodology defined in ISO/IEC 9646-2 [3].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 102 658 : "Digital Private Mobile Radio (dPMR) using FDMA with a channel spacing of
6,25 kHz".
[2] ETSI TS 102 351 (V2.1.1): "Methods for Testing and Specification (MTS); Internet Protocol
Testing (IPT); IPv6 Testing: Methodology and Framework".
[3] ISO/IEC 9646-2: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 2: Abstract Test Suite specification".
[4] ETSI TS 102 587-3: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Peer-to-Peer Digital Private Mobile Radio; Part 3: Requirements catalogue".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ETSI ES 202 553: "Methods for testing and Specification (MTS); TPLan: A notation for
expressing test Purposes".
[i.2] ETSI TS 102 726-1: "Electromagnetic compatibility and Radio spectrum Matters (ERM);
TM
Conformance testing for Mode 1 of the digital Private Mobile Radio (dPMR ); Part 1: Protocol
Implementation Conformance Statement (PICS) proforma".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 102 726-3 V2.2.1 (2015-10)
3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
BS2L Mode 2 Repeater using Limited Access Mode
BS2T Mode 2 Repeater using Transparent Access Mode
CF (Test) ConFiguration
dPMR™ digital Private Mobile Radio
EUT Equipment Under Test
M1 Mode 1
M2 Mode 2
OACSU Off Air Call Set-Up
QE Qualified Equipment
NOTE: That complies with TS 102 658 [1].
RC Requirements Catalogue
RQ ReQuirement
TP Test Purpose
TSS Test Suite Structure
4 Test Suite Structure (TSS)
The Test Suite Structure is based on the dPMR™ Requirements Catalogue [4]. It is defined by the groups within the
following TPLan specification of test purposes. The numbering is not contiguous so that new TPs can be added at a
later date without the need to completely renumber the TSS groups.
The test purposes have been divided into four groups:
Group 1: Common requirements.
Group 2: Services.
Group 3: Channel access.
Group 4: Addressing
The sub-grouping of these three groups follows the structure of the RC. Some of the sub-groups of the RC contained no
testable requirement. Headings for those sub-groups are in this test purpose document in the node group to give a full
view on the relation between RQ and TSS&TP.
5.1 Framing
5.1.1 Addressing
5.1.1.1 All Call
5.1.1.2 Dialling Plan
5.1.1.3 Talking Party ID
5.1.2 Base Station framing
5.1.3 Channel Access
5.1.3.0 General
5.1.3.1 OACSU
5.1.3.2 PTT Call
5.1.4 END frame
5.1.5 Message frame
5.1.5.1 Message Information field
5.1.6 Payload
5.1.6.1 Packet data
5.1.6.2 Short data
5.1.6.3 T1 data
5.1.6.4 T2 data
5.1.6.5 Voice
5.1.6.5.1 Voice and attached data
5.1.6.5.2 Late entry
5.1.6.5.3 Slow user data
5.1.7 Power save
5.1.8 Superframe
5.1.8.1 Traffic channel
5.1.8.2 Voice TCH

ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 102 726-3 V2.2.1 (2015-10)
5 Test Purposes (TP)
5.0 Preamble
The test purposes have been written in the formal notation TPlan. Configurations that are referenced by test purposes are
shown in annex A. TPLan user definitions are listed in annex B.
5.1 Framing
5.1.1 Addressing
5.1.1.1 All Call
Void.
5.1.1.2 Dialling Plan
TP id  : TP_PMR_1403_01
summary : 'The user should enter or select a string of digits and then press a button to initiate
the call'
RQ ref : RQ_001_1403
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     QE1 and EUT in standby and
     EUT Complies_with_Standard_User_Interface
   }
ensure that {
 when { EUT_User enters or selects an address of QE1 }
 then { QE1_User does not receive the Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1403_02
summary : 'The user should enter a string of digits and then press a button to initiate the call'
RQ ref : RQ_001_1403
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     QE1 and EUT in standby and
     EUT Complies_with_Standard_User_Interface
   }
ensure that {
 when { EUT_User enters or selects an address of QE1 before EUT_User
          presses the hash_key or dedicated_send_key }
 then { QE1_User receives the Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1412_01
summary : 'Some numeric address are not permitted'
RQ ref : RQ_001_1409
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {   EUT Complies_with_Standard_User_Interface and
      QE1 and EUT in standby
   }
ensure that {
 when { EUT_User enters or selects a non_dialable_address and
          presses dedicated_send_key }
 then { EUT indicates an error} -- audible or visible prompt
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 102 726-3 V2.2.1 (2015-10)

TP id  : TP_PMR_1415_01
summary : 'Radio receiving a talkgroup call - using wildcard'
RQ ref : RQ_001_1415
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     QE1 and EUT in standby and
     QE1 Complies_with_Standard_User_Interface
   }
ensure that {
 when { QE1_User enters or selects an EUT address
            containing an asterisk_symbol 'in one of the last four digits' and
          presses the hash_key or dedicated_send_key }
 then { EUT_User receives a TalkGroup_Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1415_02
summary : 'Radio receiving a talkgroup call'
RQ ref : RQ_001_1415
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     (EUT 'programmed with a talkgroup address') and
     QE1 Complies_with_Standard_User_Interface and
     QE1 and EUT in standby
   }
ensure that {
 when { QE1_User enters or selects the talkgroup_address of the EUT and
          presses the hash_key or dedicated_send_key }
 then { EUT_User receives the TalkGroup_Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1417_01
summary : 'Abbreviated dialled digit to address mapping'
RQ ref : RQ_001_1417
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     (EUT Complies_with_Standard_User_Interface and
       abbreviated_dialling_available) and
     QE1 in standby
   }
ensure that {
 when { EUT_User enters or selects an abbreviated_dialling_string of QE1 and
          presses the hash_key or dedicated_send_key }
 then { QE1_User receives the Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 102 726-3 V2.2.1 (2015-10)
TP id  : TP_PMR_1417_02
summary : 'Abbreviated dialling string with wildcard and no match'
RQ ref : RQ_001_1417
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     (EUT Complies_with_Standard_User_Interface and
        abbreviated_dialling_available)
     EUT and QE1 'addresses are same except for last two or more digits'
     EUT and QE1 in standby
   }
ensure that {
 when { EUT_User enters or selects the asterisk_symbol and
          presses the hash_key or dedicated_send_key }
 then { QE1_User does not receive the Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1417_03
summary : 'Abbreviated dialling string with wildcard'
RQ ref : RQ_001_1417
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     (EUT Complies_with_Standard_User_Interface and abbreviated_dialling_available)
     EUT and QE1 'addresses are same except for the last digit'
     EUT and QE1 in standby
   }
ensure that {
 when { EUT_User enters or selects the asterisk_symbol and
          presses the dedicated_send_key}
 then { QE1_User receives the Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1418_01
summary : 'Talkgroup call'
RQ ref : RQ_001_1418
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     (EUT Complies_with_Standard_User_Interface and
        'an address input mask enabled covering at least one of the last four digits') and
     (EUT and QE1 'addresses having the same digits outside of the mask' and
            in standby)
   }
ensure that {
 when { EUT_User enters or selects a masked_dialling_string of QE1
           containing an asterisk_symbol 'as the last digit' and
          presses the hash_key or dedicated_send_key }
 then { QE1_User receives the TalkGroup_Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

ETSI

---------------------- Page: 9 ----------------------
10 ETSI TS 102 726-3 V2.2.1 (2015-10)
TP id  : TP_PMR_1418_02
summary : 'Talkgroup call'
RQ ref : RQ_001_1418
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     (EUT Complies_with_Standard_User_Interface and
        abbreviated_dialling_available and
        'an address input mask is enabled covering at least one of the last four digits') and
      (EUT and QE1 'addresses having the same digits outside of the mask' and
            in standby)
   }
ensure that {
 when { EUT_User enters or selects an abbreviated_masked_dialling_string of QE1
           containing an asterisk_symbol 'as the last digit' and
          presses the hash_key or dedicated_send_key }
 then { QE1_User receives the TalkGroup_Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1420_01
summary : 'Broadcast plan'
RQ ref : RQ_001_1420
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     EUT Complies_with_Standard_User_Interface and
     QE1 'programmed with a talkgroup address'
     QE1 and EUT in standby
   }
ensure that {
 when { EUT_User enters a broadcast_command
           containing a talkgroup_address of QE1 and
          presses dedicated_send_key}
 then { QE1_User receives the Broadcast_Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1420_02
summary : 'Broadcast call - abbreviated dialling'
RQ ref : RQ_001_1420
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     (EUT Complies_with_Standard_User_Interface and
        abbreviated_dialling_available) and
     EUT and QE1 'addresses differing in one or more of the last digits'
     QE1 and EUT in standby
   }
ensure that {
 when { EUT_User enters a broadcast_command
           containing a valid abbreviated_dialling_string of QE1
            containing 'one or more asterisk symbols' and
          presses the hash_key or dedicated_send_key }
 then { QE1_User receives the Broadcast_Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

ETSI

---------------------- Page: 10 ----------------------
11 ETSI TS 102 726-3 V2.2.1 (2015-10)
TP id  : TP_PMR_1421_01
summary : 'Status call'
RQ ref : RQ_001_1421
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     EUT Complies_with_Standard_User_Interface and
     QE1 and EUT in standby
   }
ensure that {
 when { EUT_User enters a status_command
              containing a code between 0 and 31 and
              containing the address of QE1 and
          presses the hash_key or dedicated_send_key }
 then { QE1_User receives the Status_Call indicating the selected code }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1421_02
summary : 'Status call - wrong status code entered'
RQ ref : RQ_001_1421
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     EUT Complies_with_Standard_User_Interface
     QE1 and EUT in standby
   }
ensure that {
 when { EUT_User enters a status_command
              containing a code 'greater than' 31 and
              containing the address of QE1 and
          presses the dedicated_send_key }
 then { EUT indicates an error}
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

TP id  : TP_PMR_1423_01
summary : 'Force talkgroup service'
RQ ref : RQ_001_1423
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     EUT Complies_with_Standard_User_Interface and
     QE1 and EUT in standby
   }
ensure that {
 when { EUT_User enters a talkgroup_command
             containing the address of QE1 and
          presses the dedicated_send_key}
 then { QE1_User receives the TalkGroup_Call }
}

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

ETSI

---------------------- Page: 11 ----------------------
12 ETSI TS 102 726-3 V2.2.1 (2015-10)
TP id  : TP_PMR_1423_02
summary : 'Force talkgroup service - abbreviated dialling'
RQ ref : RQ_001_1423
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {
     (EUT Complies_with_Standard_User_Interface and
       abbreviated_dialling_available) and
     EUT and QE1 'addresses differing in one or more of the last digits'
     QE1 and EUT in standby
   }
ensure that {
 when { EUT_User enters a talkgroup_command
             containing a valid abbreviated_dialling_string of QE1 and
          presses hash_key or dedicated_send_key }
 then { QE1_User receives the TalkGroup_Call }
}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

5.1.1.3 Talking Party ID
TP id  : TP_PMR_0803_01
summary : 'Support of Talking Party ID'
RQ ref : RQ_001_0803
TP type : interoperability
Role  : M1, M2
config ref: CF_dPMR_01_I -- QE1 and EUT
TD ref : TBD
with {  (EUT and QE1 with powersave_disabled) and
      EUT in standby
   }
ensure that {
 when { QE1_User makes an Individual_Call to EUT }
 then { EUT indicates the address of QE1 }
}

-- xxxxxxxxxxxxxxx
...