IEC 60794-1-211:2021

Optical fibre cables - Part 1-211: Generic specification - Basic optical cable test procedures - Environmental test methods - Sheath shrinkage, method F11

IEC 60794-1-211:2021 defines test procedures to measure the shrinkage of the sheath due to thermal exposure of cables. A first test method, F11A, is included for cables where the fibre or buffered fibre and the sheath of the cable are intended to be fully terminated into a connector at one or both cable ends. A second test method, F11B, is included in this document for sheath shrinkage testing for general purpose. See IEC 60794-1-2 for a reference guide to test methods of all types and for general requirements.

Câbles à fibres optiques - Partie 1-211: Spécification générique - Procédures fondamentales d’essais des câbles optiques - Méthodes d’essais d’environnement - Rétraction de la gaine, méthode F11

IEC 60794-1-211:2021 définit des procédures d’essai pour mesurer la rétraction de la gaine due à l’exposition thermique des câbles. Une première méthode d’essai, F11A, est incluse pour les câbles où la fibre ou la fibre sous revêtement protecteur et la gaine du câble sont destinées à être entièrement équipées d’un connecteur à l’une ou aux deux extrémités du câble. Une deuxième méthode d’essai, F11B, est incluse dans le présent document pour les essais de rétraction de la gaine des câbles destinés à un usage général. Voir l’IEC 60794-1-2 pour un guide de référence des méthodes d’essai de tous types et pour les exigences générales.

General Information

• Status: Published
• Publication Date: 17-Feb-2021
• ICS: 33.180.10 - Fibres and cables
• Technical Committee: SC 86A - Fibres and cables
• Current Stage: PPUB - Publication issued
• Start Date: 19-Mar-2021
• Completion Date: 18-Feb-2021

Relations

• Replaces: IEC 60794-1-22:2017 - Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
• Effective Date: 05-Sep-2023

Standards Content (Sample)

IEC 60794-1-211 ®
Edition 1.0 2021-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibre cables –
Part 1-211: Generic specification – Basic optical cable test procedures –
Environmental test methods – Sheath shrinkage, method F11

Câbles à fibres optiques –
Partie 1-211: Spécification générique – Procédures fondamentales d’essais des
câbles optiques – Méthodes d’essais d’environnement – Rétraction de la gaine,
méthode F11
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: [phone]
3, rue de Varembé [e-mail]
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always have
committee, …). It also gives information on projects, replaced access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and once
and French, with equivalent terms in 18 additional languages.
a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or need
further assistance, please contact the Customer Service
Centre: [e-mail].
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Découvrez notre puissant moteur de recherche et consultez
webstore.iec.ch/advsearchform gratuitement tous les aperçus des publications. Avec un
La recherche avancée permet de trouver des publications IEC abonnement, vous aurez toujours accès à un contenu à jour
en utilisant différents critères (numéro de référence, texte, adapté à vos besoins.
comité d’études, …). Elle donne aussi des informations sur les
projets et les publications remplacées ou retirées. Electropedia - www.electropedia.org

Le premier dictionnaire d'électrotechnologie en ligne au monde,
IEC Just Published - webstore.iec.ch/justpublished
avec plus de 22 000 articles terminologiques en anglais et en
Restez informé sur les nouvelles publications IEC. Just
français, ainsi que les termes équivalents dans 16 langues
Published détaille les nouvelles publications parues.
additionnelles. Egalement appelé Vocabulaire
Disponible en ligne et une fois par mois par email.
Electrotechnique International (IEV) en ligne.

Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[e-mail].
IEC online collection - oc.iec.ch

IEC 60794-1-211 ®
Edition 1.0 2021-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibre cables –
Part 1-211: Generic specification – Basic optical cable test procedures –

Environmental test methods – Sheath shrinkage, method F11

Câbles à fibres optiques –
Partie 1-211: Spécification générique – Procédures fondamentales d’essais des

câbles optiques – Méthodes d’essais d’environnement – Rétraction de la gaine,

méthode F11
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-9467-3

– 2 – IEC 60794-1-211:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Method F11A – Sheath shrinkage (cables to be terminated with connectors) . 6
4.1 Objective . 6
4.2 Sample . 7
4.3 Apparatus . 7
4.4 Procedure . 7
4.5 Requirements . 8
4.6 Details to be specified . 9
4.7 Details to be reported . 9
5 Method F11B – Sheath shrinkage (general purpose) . 9
5.1 Objective . 9
5.2 Sample . 9
5.3 Apparatus . 9
5.4 Procedure . 9
5.5 Requirements . 10
5.6 Details to be specified . 10
5.7 Details to be reported . 10
Annex A (informative) Comparison between method F11A and method F11B . 11
Bibliography . 12

Figure 1 – Cable sample preparation . 7
Figure 2 – Alternative cable sample preparation (cut ends) . 8

Table A.1 – Comparison between method F11A and method F11B . 11

INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
OPTICAL FIBRE CABLES –
Part 1-211: Generic specification –
Basic optical cable test procedures –
Environmental test methods – Sheath shrinkage, method F11

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60794-1-211 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical
committee 86: Fibre optics. It is an International Standard.
This document cancels and replaces IEC 60794-1-22:2017. This edition constitutes a technical
revision.
This edition includes the following significant technical changes with respect to
IEC 60794-1-22:2017:
a) method F11 (cables intended for patch cords) of IEC 60794-1-22:2017 was renumbered
F11A and renamed as "sheath shrinkage (cables to be terminated with connectors)";
b) a second method F11B is newly included that was adapted from ANSI/TIA-455-86-A;
c) in method F11A, the thermal exposure from ambient to the specified temperature was
replaced by temperature cycling between a low and high temperature according to
IEC 60794-1-22, method F1;
– 4 – IEC 60794-1-211:2021 © IEC 2021
d) in method F11A, the continuing of the test cycles until the shrinkage exhibits a variation less
than ±1 mm was replaced with a fixed number of cycles specified by the detail specification;
e) in method F11A, the average was changed to maximum sheath shrinkage that shall not
exceed the value specified in the relevant detail specification;
f) in both methods, the alternative that the sample may be cut to length and the length between
the cut sheath ends measured is added.
The text of this International Standard is based on the following documents:
Draft Report on voting
86A/2074/FDIS 86A/2087/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and d
...