Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

Gives a method of test which provides a standard procedure to determine the ability of components, equipment and other articles, hereinafter referred to as specimens, to withstand specified severities of sinusoidal vibration. If an item is to be tested in an unpackaged form, that is without its packaging, it is referred to as a test specimen. However, if the item is packaged then the item itself is referred to as a product and the item and its packaging together are referred to as a test specimen. The purpose of this test is to determine any mechanical weakness and/or degradation in the specified performance of specimens and to use this information, in conjunction with the relevant specification, to decide upon the acceptability of the specimens. In some cases, the test method may also be used to demonstrate the mechanical robustness of specimens and/or to study their dynamic behaviour. Categorization of components can also be made on the basis of a selection from within the severities quoted in the test. The major changes with regard to the previous edition concern: - Reference to the latest version of IEC 60068-2-47:Mounting - Simplification of the layout of the standard by replacing some tables with text. - Addition of the test report requirements (see Clause 13).

Essais d'environnement - Partie 2-6: Essais - Essai Fc: Vibrations (sinusoïdales)

Fournit une méthode d'essai qui donne des règles d'exécution normalisées pour déterminer l'aptitude des composants, matériels et autres articles ci-après désignés "spécimens", à résister à des sévérités spécifiées de vibrations sinusoïdales. S'il est prevu de soumettre un objet aux essais en étant non emballé, sans son emballage, il est désigné comme un spécimen d'essai. Cependant, si l'objet est emballé, alors l'objet lui-même est désigné comme produit et l'objet ainsi que son emballage sont désignés comme spécimen d'essai. L'objet de cet essai est de déterminer les faiblesses mécaniques et/ou les dégradations des performances spécifiées des spécimens, et d'utiliser ces renseignements conjointement avec la spécification particulière pour décider si un spécimen est acceptable ou non. Dans certains cas, la méthode d'essai peut également être utilisée pour démontrer la robustesse mécanique d'un spécimen et/ou pour étudier son comportement dynamique. La classification des composants en catégories peut également se faire sur la base d'une sélection faite à partir des sévérités données dans l'essai. Les modifications principales par rapport à l'édition précédente sont les suivantes: - Référence à la dernière version de la CEI 60068 2 47: Fixation. - Simplification de la mise en page de la norme en remplaçant quelques tableaux par du texte. - Ajout d'exigences sur le rapport d'essai (voir Article 13).

General Information

Status
Published
Publication Date
12-Dec-2007
Current Stage
PPUB - Publication issued
Start Date
15-Jan-2008
Completion Date
13-Dec-2007
Ref Project

Relations

Buy Standard

Standard
IEC 60068-2-6:2007 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
English and French language
82 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60068-2-6
Edition 7.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Environmental testing –
Part 2-6: Tests – Test Fc: Vibration (sinusoidal)

Essais d'environnement –
Partie 2-6: Essais – Essai Fc: Vibrations (sinusoïdales)

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60068-2-6
Edition 7.0 2007-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Environmental testing –
Part 2-6: Tests – Test Fc: Vibration (sinusoidal)

Essais d'environnement –
Partie 2-6: Essais – Essai Fc: Vibrations (sinusoïdales)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
X
CODE PRIX
ICS 19.040 ISBN 2-8318-9490-5
– 2 – 60068-2-6 © IEC:2007
CONTENTS
FOREWORD.4
INTRODUCTION.6

1 Scope.7
2 Normative references.7
3 Terms and definitions .7
4 Requirements for testing.10
4.1 Required characteristics .10
4.1.1 Basic motion.10
4.1.2 Spurious motion.10
4.1.3 Signal tolerance.11
4.1.4 Vibration amplitude tolerances .11
4.1.5 Frequency tolerances.11
4.1.6 Sweep .12
4.2 Control strategy .12
4.2.1 Single/multipoint control.12
4.2.2 Multi-reference control .13
4.3 Mounting .13
5 Severities .13
5.1 Frequency range.14
5.1.1 Lower frequency f Hz .14
5.1.2 Upper frequency f Hz .14
5.2 Vibration amplitude.14
5.3 Duration of endurance .17
5.3.1 Endurance by sweeping .17
5.3.2 Endurance at fixed frequencies .18
6 Preconditioning.18
7 Initial measurements.18
8 Testing .18
8.1 General .18
8.2 Vibration response investigation.19
8.3 Endurance procedures.19
8.3.1 Endurance by sweeping .19
8.3.2 Endurance at fixed frequencies .19
9 Intermediate measurements.20
10 Recovery .20
11 Final measurements .20
12 Information to be given in the relevant specification.20
13 Information to be given in the test report .21

Annex A (informative) Guide to test Fc .
Annex B (informative) Examples of severities primarily intended for components .36
Annex C (informative) Examples of severities primarily intended for equipment.37

Bibliography .39

60068-2-6 © IEC:2007 – 3 –
Figure 1 – Nomogram relating vibration amplitude to frequency with lower cross-over
frequency (8 Hz to 10 Hz).15
Figure 2 – Nomogram relating vibration amplitude to frequency with higher cross-over
frequency (58 Hz to 62 Hz).
Figure 3 – Nomogram relating vibration displacement amplitude to frequency (only
applicable for frequency ranges with an upper frequency of 10 Hz) .17
Figure A.1 – Generalized transmissibility factors for vibration isolators.33

Table A.1 – Number of sweep cycles and associated endurance times per axis .30
Table A.2 – CB response time .31
Table A.3 – CPB response time.32
Table B.1 – Endurance by sweeping – Examples with higher cross-over frequency .36
Table C.1 – Endurance by sweeping – Examples with lower cross-over frequency .37
Table C.2 – Endurance by sweeping – Examples with higher cross-over frequency .38

– 4 – 60068-2-6 © IEC:2007
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ENVIRONMENTAL TESTING –
Part 2: Tests – Test Fc: Vibration (sinusoidal)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of thi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.