iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
IEC

IEC 61535:2009/COR1:2014

(Corrigendum)

Corrigendum 1 - Installation couplers intended for permanent connection in fixed installations

Corrigendum 1 - Installation couplers intended for permanent connection in fixed installations

Corrigendum 1 - Coupleurs d'installation pour connexions permanentes dans les installations fixes

General Information

Status
Published
Publication Date
23-Jan-2014
ICS
29.120.99 - Other electrical accessories
Technical Committee
TC 23 - Electrical accessories
Current Stage
DELPUB - Deleted Publication
Completion Date
16-Oct-2019
Ref Project

Relations

Corrects
IEC 61535:2009 - Installation couplers intended for permanent connection in fixed installations
Effective Date
05-Sep-2023
Revised
IEC 61535:2019 - Installation couplers intended for permanent connection in fixed installations
Effective Date
05-Sep-2023

Buy Standard

IEC 61535:2009/COR1:2014 - Corrigendum 1 - Installation couplers intended for permanent connection in fixed installations Released:1/24/2014IEC 61535:2009/COR1:2014 - Corrigendum 1 - Installation couplers intended for permanent connection in fixed installations Released:1/24/2014
PreviousNext
Standard
IEC 61535:2009/COR1:2014 - Corrigendum 1 - Installation couplers intended for permanent connection in fixed installations Released:1/24/2014
English and French language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 61535 IEC 61535
(First edition – 2009) (Première édition – 2009)

Installation couplers intended for permanent Coupleurs d'installation pour connexions

connection in fixed installations permanentes dans les installations fixes

CO RRI G E NDUM 1
8.6 The manufacturer’s catalogue or 8.6 Le catalogue du fabricant ou les
installation instructions shall contain the instructions d'installation doivent contenir
following information: les informati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

IEC
IEC 61535:2023(Main)
Installation couplers intended for permanent connection in fixed installations

IEC 61535:2023 is available as IEC 61535:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
IEC 61535:2023 applies to two-wire, up to five-wire installation couplers, with or without earthing contact, if provided, with a rated voltage up to and including 500 V AC or 500 V DC and a rated connecting capacity up to and including 10 mm2 and a rated current not exceeding 32 A for permanent connection in electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this document. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) inclusion of a definition for "live part" based on IEC 61140;
b) additional optional cross medial documentation, e.g. marking with QR-Code;
c) corrections on the consistent use of the expressions "earth", "earthing contact", "earthing circuit" and "protective earth(ing)" throughout the document;
d) addition of missing compliance provisions to 13.3;
e) update of Figure D.1 of Annex D;
f) inclusion of new Annex F for cold climate requirements.

  • Standard
    179 pages
    English language
    sale 15% off
  • Standard
    116 pages
    English and French language
    sale 15% off
IEC
IEC 63044-5-1:2017/AMD1:2022(Amendment)
Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up
  • Standard
    9 pages
    English and French language
    sale 15% off
IEC
IEC 63044-5-2:2017/AMD1:2022(Amendment)
Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments
  • Standard
    8 pages
    English and French language
    sale 15% off
IEC
IEC 63044-5-3:2017/AMD1:2022(Amendment)
Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments
  • Standard
    8 pages
    English and French language
    sale 15% off
IEC
IEC 63044-5-1:2017(Main)
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up

IEC 63044-5-1:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.
This document provides general performance requirements and test set-ups. This document is applicable (but not limited) to
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application-specific controllers,
field devices and their interfaces,
cabling and interconnection of devices,
used within a dedicated HBES/BACS network.

  • Standard
    40 pages
    English and French language
    sale 15% off
  • Standard
    75 pages
    English and French language
    sale 15% off
IEC
IEC 63044-5-2:2017(Main)
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments

IEC 63044-5-2:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.
This document specifies EMC requirements for HBES/BACS to be installed in residential, commercial and light-industrial environments, according to the definition given in IEC 61000-6-1.
This document is applicable (but not limited) to
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application-specific controllers,
field devices and their interfaces,
cabling and interconnection of devices,
used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.

  • Standard
    25 pages
    English and French language
    sale 15% off
  • Standard
    56 pages
    English and French language
    sale 15% off
IEC
IEC 63044-5-3:2017(Main)
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments

IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.
This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2.
NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application-specific controllers,
field devices and their interfaces,
cabling and interconnection of devices,
used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.

  • Standard
    16 pages
    English and French language
    sale 15% off
  • Standard
    32 pages
    English and French language
    sale 15% off
IEC
IEC TR 63044-2:2022(Main)
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 2: Environmental conditions

IEC TR 63044-2:2022(E) provides the environmental conditions for HBES/BACS devices, when declared in the manufacturer's documentation for use in one or more of the environment classes as defined in Clause 6 of this document.

  • Technical report
    17 pages
    English language
    sale 15% off
IEC
IEC 63044-4:2021(Main)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS

IEC 63044-4:2021 provides the functional safety requirements for HBES/BACS.
In addition, it defines functional safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
This document does not provide functional safety requirements for safety-related systems.
This document does not provide requirements on data protection and security.

  • Standard
    62 pages
    English and French language
    sale 15% off
IEC
IEC 63044-6:2021(Main)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 6: Requirements for planning and installation

IEC 63044-6:2021 specifies the requirements for planning and installation of HBES/BACS and the supporting infrastructure.
Radio frequency (RF) HBES/BACS are also considered.
Safety requirements are covered by IEC 60364 (all parts).
Information and communication technology (ICT) and broadcasting and communication technology (BCT) network installations are typically interfaced with HBES/BACS.
The requirements for ICT and BCT network installations are covered by ISO/IEC 14763-2.
This document does not cover HBES/BACS implementation with:
- optical fibre,
- power lines,
- power over Ethernet (PoE).

  • Standard
    78 pages
    English and French language
    sale 15% off